[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1372449386-1334-9-git-send-email-maxime.ripard@free-electrons.com>
Date: Fri, 28 Jun 2013 21:56:26 +0200
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: John Stultz <john.stultz@...aro.org>,
Thomas Gleixner <tglx@...utronix.de>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Emilio Lopez <emilio@...pez.com.ar>, kevin@...winnertech.com,
sunny@...winnertech.com, shuge@...winnertech.com,
linux-sunxi@...glegroups.com,
Maxime Ripard <maxime.ripard@...e-electrons.com>
Subject: [PATCHv2 8/8] clocksource: sun4i: Fix bug when switching from periodic to oneshot modes
The interval was firing at was set up at probe time, and only changed in
the set_next_event, and never changed back, which is not really what is
expected.
When enabling the periodic mode, now set an interval to tick every
jiffy.
Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
---
drivers/clocksource/sun4i_timer.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c
index a77fa29..a2a9088 100644
--- a/drivers/clocksource/sun4i_timer.c
+++ b/drivers/clocksource/sun4i_timer.c
@@ -39,6 +39,7 @@
#define TIMER_CNTVAL_REG(val) (0x10 * val + 0x18)
static void __iomem *timer_base;
+static u32 ticks_per_jiffy;
static void sun4i_clkevt_time_stop(u8 timer)
{
@@ -61,7 +62,8 @@ static void sun4i_clkevt_time_start(u8 timer, bool periodic)
else
val |= TIMER_CTL_ONESHOT;
- writel(val | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(timer));
+ writel(val | TIMER_CTL_ENABLE | TIMER_CTL_AUTORELOAD,
+ timer_base + TIMER_CTL_REG(timer));
}
static void sun4i_clkevt_mode(enum clock_event_mode mode,
@@ -70,6 +72,7 @@ static void sun4i_clkevt_mode(enum clock_event_mode mode,
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
sun4i_clkevt_time_stop(0);
+ sun4i_clkevt_time_setup(0, ticks_per_jiffy);
sun4i_clkevt_time_start(0, true);
break;
case CLOCK_EVT_MODE_ONESHOT:
@@ -144,10 +147,10 @@ static void __init sun4i_timer_init(struct device_node *node)
panic("Can't get timer clock");
clk_prepare_enable(clk);
- writel(clk_get_rate(clk) / HZ,
- timer_base + TIMER_INTVAL_REG(0));
- writel(TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M) | TIMER_CTL_AUTORELOAD,
+ ticks_per_jiffy = DIV_ROUND_UP(clk_get_rate(clk), HZ);
+
+ writel(TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M),
timer_base + TIMER_CTL_REG(0));
ret = setup_irq(irq, &sun4i_timer_irq);
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists