[ 0.000000] Linux version 3.10.0-rc7-wl-01596-gb53e037 (kbuild@snb) (gcc version 4.8.1 (Debian 4.8.1-3) ) #1 SMP Fri Jun 28 04:36:01 CST 2013 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x100000 [ 0.000000] initial memory mapped: [mem 0x00000000-0x027fffff] [ 0.000000] Base memory trampoline at [7809b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0e000000-0x0e3fffff] [ 0.000000] [mem 0x0e000000-0x0e3fffff] page 4k [ 0.000000] BRK [0x02396000, 0x02396fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x08000000-0x0dffffff] [ 0.000000] [mem 0x08000000-0x0dffffff] page 4k [ 0.000000] BRK [0x02397000, 0x02397fff] PGTABLE [ 0.000000] BRK [0x02398000, 0x02398fff] PGTABLE [ 0.000000] BRK [0x02399000, 0x02399fff] PGTABLE [ 0.000000] BRK [0x0239a000, 0x0239afff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x07ffffff] [ 0.000000] [mem 0x00100000-0x07ffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0e400000-0x0fffdfff] [ 0.000000] [mem 0x0e400000-0x0fffdfff] page 4k [ 0.000000] log_buf_len: 8388608 [ 0.000000] early log buf free: 128940(98%) [ 0.000000] RAMDISK: [mem 0x0e73f000-0x0ffeffff] [ 0.000000] ACPI: RSDP 000fd920 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0fffe450 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0fffe490 011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0fffff40 00040 [ 0.000000] ACPI: SSDT 0ffff7a0 00796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0ffff680 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0ffff640 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffa000 ( fee00000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 255MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0fffe000 [ 0.000000] low ram: 0 - 0fffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:fffd001, boot clock [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x0fffdfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65436 [ 0.000000] free_area_init_node: node 0, pgdat 79d73a00, node_mem_map 864ff024 [ 0.000000] DMA zone: 36 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 540 pages used for memmap [ 0.000000] Normal zone: 61438 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffa000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffff9000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @864e7000 s33624 r0 d15528 u49152 [ 0.000000] pcpu-alloc: s33624 r0 d15528 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] kvm-clock: cpu 0, msr 0:fffd001, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr e4e9880 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64860 [ 0.000000] Kernel command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-s07-0628/devel-snb-i386-201306280352/.vmlinuz-b53e037930134d11fa6307162b41fb19b6c43643-20130628043743-2-vp branch=linux-devel/devel-snb-i386-201306280352 BOOT_IMAGE=/kernel/i386-randconfig-s07-0628/b53e037930134d11fa6307162b41fb19b6c43643/vmlinuz-3.10.0-rc7-wl-01596-gb53e037 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 205296k/262136k available (8588k kernel code, 56448k reserved, 5531k data, 680k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd33000 - 0xfffff000 (2864 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0x887fe000 - 0xff7fe000 (1904 MB) [ 0.000000] lowmem : 0x78000000 - 0x87ffe000 ( 255 MB) [ 0.000000] .init : 0x79dca000 - 0x79e74000 ( 680 kB) [ 0.000000] .data : 0x79863177 - 0x79dc9e00 (5531 kB) [ 0.000000] .text : 0x79000000 - 0x79863177 (8588 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] [ 0.000000] [ 0.000000] [ 0.000000] [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=85404000 soft=85406000 [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3551 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000000] ODEBUG: 8 of 8 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2693.382 MHz processor [ 0.020000] Calibrating delay loop (skipped) preset value.. 5386.76 BogoMIPS (lpj=26933820) [ 0.020000] pid_max: default: 32768 minimum: 301 [ 0.020000] Security Framework initialized [ 0.020000] SELinux: Initializing. [ 0.020000] SELinux: Starting in permissive mode [ 0.020000] AppArmor: AppArmor disabled by boot time parameter [ 0.020000] Mount-cache hash table entries: 512 [ 0.020000] mce: CPU supports 10 MCE banks [ 0.020000] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.020000] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.020000] tlb_flushall_shift: 6 [ 0.020000] debug: unmapping init [mem 0x79e74000-0x79e77fff] [ 0.020499] ACPI: Core revision 20130517 [ 0.026128] ACPI: All ACPI Tables successfully acquired [ 0.026788] ftrace: allocating 41019 entries in 81 pages [ 0.040284] Getting VERSION: 50014 [ 0.040704] Getting VERSION: 50014 [ 0.041087] Getting ID: 0 [ 0.041400] Getting ID: f000000 [ 0.041764] Getting LVT0: 8700 [ 0.042105] Getting LVT1: 8400 [ 0.042454] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.043133] enabled ExtINT on CPU#0 [ 0.050983] ENABLING IO-APIC IRQs [ 0.051360] init IO_APIC IRQs [ 0.051699] apic 0 pin 0 not connected [ 0.052140] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.053032] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.053912] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.054800] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.055691] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.056580] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.057496] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.058399] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.059294] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.060032] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.060964] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.061862] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.062747] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.063649] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.064547] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.065426] apic 0 pin 16 not connected [ 0.065899] apic 0 pin 17 not connected [ 0.066319] apic 0 pin 18 not connected [ 0.066749] apic 0 pin 19 not connected [ 0.067178] apic 0 pin 20 not connected [ 0.067609] apic 0 pin 21 not connected [ 0.068038] apic 0 pin 22 not connected [ 0.068467] apic 0 pin 23 not connected [ 0.070160] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.070968] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.072120] Using local APIC timer interrupts. [ 0.072120] calibrating APIC timer ... [ 0.080000] ... lapic delta = 6250169 [ 0.080000] ... PM-Timer delta = 357942 [ 0.080000] ... PM-Timer result ok [ 0.080000] ..... delta 6250169 [ 0.080000] ..... mult: 268442714 [ 0.080000] ..... calibration result: 10000270 [ 0.080000] ..... CPU clock speed is 2693.3422 MHz. [ 0.080000] ..... host bus clock speed is 1000.0270 MHz. [ 0.080000] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.080000] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.090014] SMP alternatives: lockdep: fixing up alternatives [ 0.091335] CPU 1 irqstacks, hard=854d0000 soft=854d2000 [ 0.092505] smpboot: Booting Node 0, Processors #1 OK [ 0.010000] Initializing CPU#1 [ 0.020000] kvm-clock: cpu 1, msr 0:fffd041, secondary cpu clock [ 0.020000] masked ExtINT on CPU#1 [ 0.150082] Brought up 2 CPUs [ 0.150469] smpboot: Total of 2 processors activated (10773.52 BogoMIPS) [ 0.160346] EVM: security.selinux [ 0.160713] EVM: security.SMACK64 [ 0.161163] EVM: security.capability [ 0.164944] atomic64 test passed for i586+ platform with CX8 and with SSE [ 0.165852] NET: Registered protocol family 16 [ 0.150038] KVM setup async PF for cpu 1 [ 0.150038] kvm-stealtime: cpu 1, msr e4f5880 [ 0.240847] ACPI: bus type PCI registered [ 0.241387] dca service started, version 1.12.1 [ 0.242201] PCI: PCI BIOS revision 2.10 entry at 0xfc6d5, last bus=0 [ 0.243148] PCI: Using configuration type 1 for base access [ 0.272390] ACPI: Added _OSI(Module Device) [ 0.272916] ACPI: Added _OSI(Processor Device) [ 0.273417] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.273931] ACPI: Added _OSI(Processor Aggregator Device) [ 0.277017] ACPI: EC: Look up EC in DSDT [ 0.289836] ACPI: Interpreter enabled [ 0.290010] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571) [ 0.291112] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571) [ 0.292209] ACPI: (supports S0 S3 S5) [ 0.292667] ACPI: Using IOAPIC for interrupt routing [ 0.293359] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.313224] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.314876] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.316478] PCI host bridge to bus 0000:00 [ 0.317003] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.317639] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.318412] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.319244] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.320009] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.320875] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.322393] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.323838] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.331243] pci 0000:00:01.1: reg 20: [io 0xc1e0-0xc1ef] [ 0.334098] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.335187] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.335980] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.337073] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.343393] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref] [ 0.346973] pci 0000:00:02.0: reg 14: [mem 0xfebe0000-0xfebe0fff] [ 0.357844] pci 0000:00:02.0: reg 30: [mem 0xfebc0000-0xfebcffff pref] [ 0.359362] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 [ 0.361683] pci 0000:00:03.0: reg 10: [io 0xc1c0-0xc1df] [ 0.363780] pci 0000:00:03.0: reg 14: [mem 0xfebe1000-0xfebe1fff] [ 0.372243] pci 0000:00:03.0: reg 30: [mem 0xfebd0000-0xfebdffff pref] [ 0.373501] pci 0000:00:04.0: [8086:100e] type 00 class 0x020000 [ 0.375816] pci 0000:00:04.0: reg 10: [mem 0xfeb80000-0xfeb9ffff] [ 0.377997] pci 0000:00:04.0: reg 14: [io 0xc000-0xc03f] [ 0.386304] pci 0000:00:04.0: reg 30: [mem 0xfeba0000-0xfebbffff pref] [ 0.387497] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 0.390008] pci 0000:00:05.0: reg 10: [io 0xc040-0xc07f] [ 0.392262] pci 0000:00:05.0: reg 14: [mem 0xfebe2000-0xfebe2fff] [ 0.410538] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 0.412626] pci 0000:00:06.0: reg 10: [io 0xc080-0xc0bf] [ 0.414593] pci 0000:00:06.0: reg 14: [mem 0xfebe3000-0xfebe3fff] [ 0.432647] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 0.434728] pci 0000:00:07.0: reg 10: [io 0xc0c0-0xc0ff] [ 0.441385] pci 0000:00:07.0: reg 14: [mem 0xfebe4000-0xfebe4fff] [ 0.450071] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 0.452087] pci 0000:00:08.0: reg 10: [io 0xc100-0xc13f] [ 0.460010] pci 0000:00:08.0: reg 14: [mem 0xfebe5000-0xfebe5fff] [ 0.474553] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 0.476557] pci 0000:00:09.0: reg 10: [io 0xc140-0xc17f] [ 0.478462] pci 0000:00:09.0: reg 14: [mem 0xfebe6000-0xfebe6fff] [ 0.486959] pci 0000:00:0a.0: [1af4:1001] type 00 class 0x010000 [ 0.491454] pci 0000:00:0a.0: reg 10: [io 0xc180-0xc1bf] [ 0.493404] pci 0000:00:0a.0: reg 14: [mem 0xfebe7000-0xfebe7fff] [ 0.504662] pci 0000:00:0b.0: [8086:25ab] type 00 class 0x088000 [ 0.506025] pci 0000:00:0b.0: reg 10: [mem 0xfebe8000-0xfebe800f] [ 0.511236] pci_bus 0000:00: on NUMA node 0 [ 0.517944] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.518759] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.521332] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.522312] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.523269] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.524221] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.525010] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.526773] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.527315] acpi root: \_SB_.PCI0 notify handler is installed [ 0.528005] Found 1 acpi root devices [ 0.528781] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.529601] vgaarb: loaded [ 0.529888] vgaarb: bridge control possible 0000:00:02.0 [ 0.554408] ACPI: bus type USB registered [ 0.554958] usbcore: registered new interface driver usbfs [ 0.555547] usbcore: registered new interface driver hub [ 0.558475] usbcore: registered new device driver usb [ 0.559198] pps_core: LinuxPPS API ver. 1 registered [ 0.559706] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.560022] PTP clock support registered [ 0.560470] EDAC MC: Ver: 3.0.0 [ 0.561500] wmi: Mapper loaded [ 0.562124] Advanced Linux Sound Architecture Driver Initialized. [ 0.562746] PCI: Using ACPI for IRQ routing [ 0.563185] PCI: pci_cache_line_size set to 64 bytes [ 0.563911] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.564534] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff] [ 0.565775] NET: Registered protocol family 23 [ 0.566353] Bluetooth: Core ver 2.16 [ 0.566764] NET: Registered protocol family 31 [ 0.567242] Bluetooth: HCI device and connection manager initialized [ 0.567897] Bluetooth: HCI socket layer initialized [ 0.568407] Bluetooth: L2CAP socket layer initialized [ 0.568945] Bluetooth: SCO socket layer initialized [ 0.580121] NetLabel: Initializing [ 0.580493] NetLabel: domain hash size = 128 [ 0.580951] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.581550] NetLabel: unlabeled traffic allowed by default [ 0.582273] nfc: nfc_init: NFC Core ver 0.1 [ 0.582785] NET: Registered protocol family 39 [ 0.584148] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.590049] cfg80211: Calling CRDA to update world regulatory domain [ 0.591222] Switching to clocksource kvm-clock [ 0.592620] Warning: could not register annotated branches stats [ 0.722594] FS-Cache: Loaded [ 0.723174] pnp: PnP ACPI init [ 0.723630] ACPI: bus type PNP registered [ 0.724150] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 0.725077] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.725823] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 0.726759] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.746653] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 0.747743] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.748536] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 0.749394] pnp 00:03: [dma 2] [ 0.749805] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.750653] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 0.751917] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.752756] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 0.753684] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.754928] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.756522] pnp: PnP ACPI: found 7 devices [ 0.756974] ACPI: bus type PNP unregistered [ 0.757419] INFO_MDMA: LNW DMA Driver Version 1.1.0 [ 0.806906] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.807525] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.808099] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.808752] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 0.809553] NET: Registered protocol family 2 [ 0.810584] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.824453] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 0.825265] TCP: Hash tables configured (established 2048 bind 2048) [ 0.825999] TCP: reno registered [ 0.826367] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.827021] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.827963] NET: Registered protocol family 1 [ 0.828485] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.829125] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.829762] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.830479] pci 0000:00:02.0: Boot video device [ 0.831043] PCI: CLS 0 bytes, default 64 [ 0.832003] Unpacking initramfs... [ 2.660756] debug: unmapping init [mem 0x8673f000-0x87feffff] [ 3.165341] DMA-API: preallocated 65536 debug entries [ 3.165898] DMA-API: debugging enabled by kernel config [ 3.167203] kvm: no hardware support [ 3.167610] has_svm: not amd [ 3.167913] kvm: no hardware support [ 3.168886] Machine check injector initialized [ 3.169779] apm: BIOS not found. [ 3.227044] PCLMULQDQ-NI instructions are not detected. [ 3.260906] Initializing RT-Tester: OK [ 3.261719] audit: initializing netlink socket (disabled) [ 3.262624] type=2000 audit(1372365372.260:1): initialized [ 3.303601] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 3.305166] VFS: Disk quotas dquot_6.5.2 [ 3.305660] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.307641] jffs2: version 2.2. (SUMMARY) [ 3.308709] ROMFS MTD (C) 2007 Red Hat, Inc. [ 3.394001] alg: No test for crc32 (crc32-table) [ 3.394686] alg: No test for stdrng (krng) [ 3.395422] NET: Registered protocol family 38 [ 3.395924] Key type asymmetric registered [ 3.396365] Asymmetric key parser 'x509' registered [ 3.396875] test_string_helpers: Running tests... [ 3.398304] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.398888] cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8 [ 3.399629] ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6 [ 3.408572] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.409865] rivafb_setup START [ 3.410566] nvidiafb_setup START [ 3.411367] vmlfb: initializing [ 3.411981] no IO addresses supplied [ 3.412687] usbcore: registered new interface driver smscufx [ 3.449462] uvesafb: failed to execute /sbin/v86d [ 3.449978] uvesafb: make sure that the v86d helper is installed and executable [ 3.451925] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 3.452770] uvesafb: vbe_init() failed with -22 [ 3.453392] uvesafb: probe of uvesafb.0 failed with error -22 [ 3.454181] ipmi message handler version 39.2 [ 3.454765] ipmi device interface [ 3.455271] IPMI System Interface driver. [ 3.455888] ipmi_si: Adding default-specified kcs state machine [ 3.456666] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 3.457927] ipmi_si: Interface detection failed [ 3.492633] ipmi_si: Adding default-specified smic state machine [ 3.493299] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 3.494329] ipmi_si: Interface detection failed [ 3.530125] ipmi_si: Adding default-specified bt state machine [ 3.530818] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 3.531884] ipmi_si: Interface detection failed [ 3.570249] ipmi_si: Unable to find any System Interface(s) [ 3.570922] IPMI Watchdog: driver initialized [ 3.571412] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 3.572531] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 3.573331] ACPI: Power Button [PWRF] [ 3.578411] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 3.581558] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 3.582228] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:3) [ 3.583934] virtio-pci 0000:00:03.0: setting latency timer to 64 [ 3.586426] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 3.587041] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:3) [ 3.588744] virtio-pci 0000:00:05.0: setting latency timer to 64 [ 3.607743] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 3.609676] virtio-pci 0000:00:06.0: setting latency timer to 64 [ 3.613876] virtio-pci 0000:00:07.0: setting latency timer to 64 [ 3.617670] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 3.633074] virtio-pci 0000:00:08.0: setting latency timer to 64 [ 3.639328] virtio-pci 0000:00:09.0: setting latency timer to 64 [ 3.645201] virtio-pci 0000:00:0a.0: setting latency timer to 64 [ 3.770890] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 3.794965] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.797890] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 3.798608] Non-volatile memory driver v1.3 [ 3.799058] toshiba: not a supported Toshiba laptop [ 3.800171] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing [ 3.800974] platform pc8736x_gpio.0: no device found [ 3.801643] nsc_gpio initializing [ 3.802038] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 3.802596] Linux agpgart interface v0.103 [ 3.803915] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 3.804867] Hangcheck: Using getrawmonotonic(). [ 3.805777] [drm] Initialized drm 1.1.0 20060810 [ 3.829223] [TTM] Zone kernel: Available graphics memory: 102648 kiB [ 3.829957] [TTM] Initializing pool allocator [ 3.830706] ------------[ cut here ]------------ [ 3.831240] WARNING: at /c/kernel-tests/src/linux/kernel/workqueue.c:1432 __queue_delayed_work+0x81/0x247() [ 3.832303] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-rc7-wl-01596-gb53e037 #1 [ 3.833158] 00000000 00000000 85429d24 798531bf 85429d3c 7906c42f 790831cf 00000201 [ 3.834185] 00000001 7ea3ec14 85429d4c 7906c4d7 00000009 00000000 85429d70 790831cf [ 3.835827] 8542b770 7ea3ec34 00000020 00000001 00000246 00000000 00000020 85429d90 [ 3.836829] Call Trace: [ 3.837115] [<798531bf>] dump_stack+0x16/0x18 [ 3.837597] [<7906c42f>] warn_slowpath_common+0x48/0x5f [ 3.838154] [<790831cf>] ? __queue_delayed_work+0x81/0x247 [ 3.838740] [<7906c4d7>] warn_slowpath_null+0x14/0x18 [ 3.839278] [<790831cf>] __queue_delayed_work+0x81/0x247 [ 3.839849] [<79084358>] queue_delayed_work_on+0x42/0x59 [ 3.840437] [<792d944c>] schedule_delayed_work+0x16/0x18 [ 3.840453] [<792da72b>] drm_helper_probe_single_connector_modes+0xf5/0x2be [ 3.840453] [<792d7821>] drm_fb_helper_probe_connector_modes+0x3a/0x4e [ 3.840453] [<792d8fdc>] drm_fb_helper_initial_config+0x14d/0x3ae [ 3.840453] [<79110996>] ? __kmalloc_node+0x6a/0xd6 [ 3.840453] [<792d9641>] ? drm_helper_disable_unused_functions+0xc3/0xdc [ 3.840453] [<7934cd7c>] cirrus_fbdev_init+0x7c/0x8d [ 3.840453] [<7934c623>] cirrus_modeset_init+0x145/0x186 [ 3.840453] [<7934b925>] cirrus_driver_load+0x88/0xce [ 3.840453] [<792e4321>] drm_get_pci_dev+0x136/0x214 [ 3.840453] [<7934c724>] cirrus_pci_probe+0x85/0x91 [ 3.840453] [<791fbcfa>] pci_device_probe+0x5c/0x94 [ 3.840453] [<793e4586>] driver_probe_device+0x97/0x1b1 [ 3.840453] [<793e4724>] __driver_attach+0x53/0x6f [ 3.840453] [<793e31d4>] bus_for_each_dev+0x3e/0x69 [ 3.840453] [<793e44a6>] driver_attach+0x19/0x1b [ 3.840453] [<793e46d1>] ? __device_attach+0x31/0x31 [ 3.840453] [<793e382e>] bus_add_driver+0xb4/0x1bd [ 3.840453] [<793e4ef3>] driver_register+0x8c/0xe9 [ 3.840453] [<791fbb2d>] __pci_register_driver+0x4a/0x4d [ 3.840453] [<792e4470>] drm_pci_init+0x71/0xc9 [ 3.840453] [<79df7f16>] ? ftrace_define_fields_intel_gpu_freq_change+0x1c/0x1c [ 3.840453] [<79df7f31>] cirrus_init+0x1b/0x25 [ 3.840453] [<79dcaa28>] do_one_initcall+0x6b/0x119 [ 3.840453] [<79dcabc7>] kernel_init_freeable+0xf1/0x171 [ 3.840453] [<7984161e>] kernel_init+0xd/0xb9 [ 3.840453] [<79860cf7>] ret_from_kernel_thread+0x1b/0x28 [ 3.840453] [<79841611>] ? rest_init+0xb1/0xb1 [ 3.840453] ---[ end trace 4a7136f8b8f4ca4a ]--- [ 3.840453] ------------[ cut here ]------------ [ 3.840453] WARNING: at /c/kernel-tests/src/linux/kernel/workqueue.c:1434 __queue_delayed_work+0x105/0x247() [ 3.840453] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.10.0-rc7-wl-01596-gb53e037 #1 [ 3.840453] 00000000 00000000 85429d24 798531bf 85429d3c 7906c42f 79083253 00000201 [ 3.840453] 00000001 7ea3ec14 85429d4c 7906c4d7 00000009 00000000 85429d70 79083253 [ 3.840453] 8542b770 7ea3ec34 00000020 00000001 00000246 00000000 00000020 85429d90 [ 3.840453] Call Trace: [ 3.840453] [<798531bf>] dump_stack+0x16/0x18 [ 3.840453] [<7906c42f>] warn_slowpath_common+0x48/0x5f [ 3.840453] [<79083253>] ? __queue_delayed_work+0x105/0x247 [ 3.840453] [<7906c4d7>] warn_slowpath_null+0x14/0x18 [ 3.840453] [<79083253>] __queue_delayed_work+0x105/0x247 [ 3.840453] [<79084358>] queue_delayed_work_on+0x42/0x59 [ 3.840453] [<792d944c>] schedule_delayed_work+0x16/0x18 [ 3.840453] [<792da72b>] drm_helper_probe_single_connector_modes+0xf5/0x2be [ 3.840453] [<792d7821>] drm_fb_helper_probe_connector_modes+0x3a/0x4e [ 3.840453] [<792d8fdc>] drm_fb_helper_initial_config+0x14d/0x3ae [ 3.840453] [<79110996>] ? __kmalloc_node+0x6a/0xd6 [ 3.840453] [<792d9641>] ? drm_helper_disable_unused_functions+0xc3/0xdc [ 3.840453] [<7934cd7c>] cirrus_fbdev_init+0x7c/0x8d [ 3.840453] [<7934c623>] cirrus_modeset_init+0x145/0x186 [ 3.840453] [<7934b925>] cirrus_driver_load+0x88/0xce [ 3.840453] [<792e4321>] drm_get_pci_dev+0x136/0x214 [ 3.840453] [<7934c724>] cirrus_pci_probe+0x85/0x91 [ 3.840453] [<791fbcfa>] pci_device_probe+0x5c/0x94 [ 3.840453] [<793e4586>] driver_probe_device+0x97/0x1b1 [ 3.840453] [<793e4724>] __driver_attach+0x53/0x6f [ 3.840453] [<793e31d4>] bus_for_each_dev+0x3e/0x69 [ 3.840453] [<793e44a6>] driver_attach+0x19/0x1b [ 3.840453] [<793e46d1>] ? __device_attach+0x31/0x31 [ 3.840453] [<793e382e>] bus_add_driver+0xb4/0x1bd [ 3.840453] [<793e4ef3>] driver_register+0x8c/0xe9 [ 3.840453] [<791fbb2d>] __pci_register_driver+0x4a/0x4d [ 3.840453] [<792e4470>] drm_pci_init+0x71/0xc9 [ 3.840453] [<79df7f16>] ? ftrace_define_fields_intel_gpu_freq_change+0x1c/0x1c [ 3.840453] [<79df7f31>] cirrus_init+0x1b/0x25 [ 3.840453] [<79dcaa28>] do_one_initcall+0x6b/0x119 [ 3.840453] [<79dcabc7>] kernel_init_freeable+0xf1/0x171 [ 3.840453] [<7984161e>] kernel_init+0xd/0xb9 [ 3.840453] [<79860cf7>] ret_from_kernel_thread+0x1b/0x28 [ 3.840453] [<79841611>] ? rest_init+0xb1/0xb1 [ 3.840453] ---[ end trace 4a7136f8b8f4ca4b ]--- [ 3.840453] ------------[ cut here ]------------ [ 3.840453] WARNING: at /c/kernel-tests/src/linux/kernel/workqueue.c:1365 __queue_work+0x266/0x3a5() [ 3.840453] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.10.0-rc7-wl-01596-gb53e037 #1 [ 3.840453] 00000000 00000000 85429d00 798531bf 85429d18 7906c42f 79082ff8 ffffff01 [ 3.840453] 864ef600 00000001 85429d28 7906c4d7 00000009 00000000 85429d4c 79082ff8 [ 3.840453] 00000000 00000020 00000000 7ea3ec14 00000201 00000001 7ea3ec14 85429d70 [ 3.840453] Call Trace: [ 3.840453] [<798531bf>] dump_stack+0x16/0x18 [ 3.840453] [<7906c42f>] warn_slowpath_common+0x48/0x5f [ 3.840453] [<79082ff8>] ? __queue_work+0x266/0x3a5 [ 3.840453] [<7906c4d7>] warn_slowpath_null+0x14/0x18 [ 3.840453] [<79082ff8>] __queue_work+0x266/0x3a5 [ 3.840453] [<79083271>] __queue_delayed_work+0x123/0x247 [ 3.840453] [<79084358>] queue_delayed_work_on+0x42/0x59 [ 3.840453] [<792d944c>] schedule_delayed_work+0x16/0x18 [ 3.840453] [<792da72b>] drm_helper_probe_single_connector_modes+0xf5/0x2be [ 3.840453] [<792d7821>] drm_fb_helper_probe_connector_modes+0x3a/0x4e [ 3.840453] [<792d8fdc>] drm_fb_helper_initial_config+0x14d/0x3ae [ 3.840453] [<79110996>] ? __kmalloc_node+0x6a/0xd6 [ 3.840453] [<792d9641>] ? drm_helper_disable_unused_functions+0xc3/0xdc [ 3.840453] [<7934cd7c>] cirrus_fbdev_init+0x7c/0x8d [ 3.840453] [<7934c623>] cirrus_modeset_init+0x145/0x186 [ 3.840453] [<7934b925>] cirrus_driver_load+0x88/0xce [ 3.840453] [<792e4321>] drm_get_pci_dev+0x136/0x214 [ 3.840453] [<7934c724>] cirrus_pci_probe+0x85/0x91 [ 3.840453] [<791fbcfa>] pci_device_probe+0x5c/0x94 [ 3.840453] [<793e4586>] driver_probe_device+0x97/0x1b1 [ 3.840453] [<793e4724>] __driver_attach+0x53/0x6f [ 3.840453] [<793e31d4>] bus_for_each_dev+0x3e/0x69 [ 3.840453] [<793e44a6>] driver_attach+0x19/0x1b [ 3.840453] [<793e46d1>] ? __device_attach+0x31/0x31 [ 3.840453] [<793e382e>] bus_add_driver+0xb4/0x1bd [ 3.840453] [<793e4ef3>] driver_register+0x8c/0xe9 [ 3.840453] [<791fbb2d>] __pci_register_driver+0x4a/0x4d [ 3.840453] [<792e4470>] drm_pci_init+0x71/0xc9 [ 3.840453] [<79df7f16>] ? ftrace_define_fields_intel_gpu_freq_change+0x1c/0x1c [ 3.840453] [<79df7f31>] cirrus_init+0x1b/0x25 [ 3.840453] [<79dcaa28>] do_one_initcall+0x6b/0x119 [ 3.840453] [<79dcabc7>] kernel_init_freeable+0xf1/0x171 [ 3.840453] [<7984161e>] kernel_init+0xd/0xb9 [ 3.840453] [<79860cf7>] ret_from_kernel_thread+0x1b/0x28 [ 3.840453] [<79841611>] ? rest_init+0xb1/0xb1 [ 3.840453] ---[ end trace 4a7136f8b8f4ca4c ]--- [ 3.921879] [drm] fb mappable at 0x0 [ 3.922278] [drm] vram aper at 0x0 [ 3.922653] [drm] size 0 [ 3.922928] [drm] fb depth is 24 [ 3.923270] [drm] pitch is 3840 [ 3.923640] cirrusdrmfb: enable CONFIG_FB_LITTLE_ENDIAN to support this framebuffer [ 3.924443] [drm] Initialized cirrus 1.0.0 20110418 for 0000:00:02.0 on minor 0 [ 3.925437] usbcore: registered new interface driver udl [ 3.927079] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 3.927883] dummy-irq: no IRQ given. Use irq=N [ 3.928804] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 3.929725] c2port c2port0: C2 port uc added [ 3.930240] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 3.931487] Guest personality initialized and is inactive [ 3.932379] VMCI host device registered (name=vmci, major=10, minor=60) [ 3.933075] Initialized host personality [ 3.934571] usbcore: registered new interface driver viperboard [ 3.955072] mtdoops: mtd device (mtddev=name/number) must be supplied [ 3.955887] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 3.956606] Could not find PAR responsible for SC520CDP Flash Bank #1 [ 3.957273] Trying default address 0x8c00000 [ 3.957813] SC520 CDP flash device: 0x800000 at 0x8800000 [ 3.958376] Failed to ioremap_nocache [ 3.958774] NetSc520 flash device: 0x100000 at 0x200000 [ 3.959357] Failed to ioremap_nocache [ 3.959756] Failed to ioremap_nocache [ 3.961093] Generic platform RAM MTD, (c) 2004 Simtec Electronics [ 3.962611] slram: not enough parameters. [ 3.963073] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks. [ 3.963869] pmc551: not detected [ 3.964274] Spectra MTD driver built on Jun 28 2013 @ 04:17:42 [ 4.002168] No valid DiskOnChip devices found [ 4.004001] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 4.005010] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 4.005991] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 4.006973] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 4.007990] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 4.008992] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 4.009999] NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 128MiB 1,8V 8-bit), 128MiB, page size: 512, OOB size: 16 [ 4.012380] flash size: 128 MiB [ 4.012823] page size: 512 bytes [ 4.013258] OOB area size: 16 bytes [ 4.013693] sector size: 16 KiB [ 4.014026] pages number: 262144 [ 4.014366] pages per sector: 32 [ 4.014717] bus width: 8 [ 4.014990] bits in sector size: 14 [ 4.015358] bits in page size: 9 [ 4.015707] bits in OOB size: 4 [ 4.016039] flash size with OOB: 135168 KiB [ 4.016502] page address bytes: 4 [ 4.016851] sector address bytes: 3 [ 4.017217] options: 0x42 [ 4.019270] Scanning device for bad blocks [ 4.058186] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit": [ 4.058878] 0x000000000000-0x000008000000 : "NAND simulator partition 0" [ 4.061361] vcan: Virtual CAN interface driver [ 4.061865] CAN device driver interface [ 4.062303] usbcore: registered new interface driver kvaser_usb [ 4.062959] usbcore: registered new interface driver peak_usb [ 4.063666] usbcore: registered new interface driver usb_8dev [ 4.064333] sja1000 CAN netdevice driver [ 4.064807] sja1000_isa: insufficient parameters supplied [ 4.066234] cc770: CAN netdevice driver [ 4.067091] usbcore: registered new interface driver stir4200 [ 4.068340] usbcore: registered new interface driver kingsun-sir [ 4.069001] usbcore: registered new interface driver ksdazzle-sir [ 4.083908] Generic UIO driver for PCI 2.3 devices version: 0.01.0 [ 4.085203] usbcore: registered new interface driver hwa-rc [ 4.088381] usbcore: registered new interface driver i1480-dfu-usb [ 4.089878] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.090638] ehci-pci: EHCI PCI platform driver [ 4.091154] ehci-platform: EHCI generic platform driver [ 4.103848] usbcore: registered new interface driver wusb-cbaf [ 4.104537] usbcore: registered new interface driver cdc_wdm [ 4.105933] usbcore: registered new interface driver usbtmc [ 4.106597] usbcore: registered new interface driver mdc800 [ 4.107182] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 4.108018] usbcore: registered new interface driver adutux [ 4.108639] usbcore: registered new interface driver cypress_cy7c63 [ 4.109321] usbcore: registered new interface driver emi62 - firmware loader [ 4.110095] driver ftdi-elan [ 4.111588] usbcore: registered new interface driver ftdi-elan [ 4.112236] usbcore: registered new interface driver iowarrior [ 4.113039] usbcore: registered new interface driver isight_firmware [ 4.113746] usbcore: registered new interface driver usblcd [ 4.114815] usbcore: registered new interface driver ldusb [ 4.115444] usbcore: registered new interface driver usbled [ 4.116057] usbcore: registered new interface driver legousbtower [ 4.116727] usbcore: registered new interface driver usbtest [ 4.117348] usbcore: registered new interface driver trancevibrator [ 4.118600] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 4.134752] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.135312] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.160106] tsc: Refined TSC clocksource calibration: 2693.510 MHz [ 4.230120] mousedev: PS/2 mouse device common for all mice [ 4.230776] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0) [ 4.232691] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 4.233608] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 4.236624] usbcore: registered new interface driver xpad [ 4.237273] usbcore: registered new interface driver usb_acecad [ 4.237937] usbcore: registered new interface driver aiptek [ 4.238560] usbcore: registered new interface driver gtco [ 4.239484] usbcore: registered new interface driver hanwang [ 4.247601] usbcore: registered new interface driver kbtab [ 4.248283] usbcore: registered new interface driver wacom [ 4.250435] mk712: device not present [ 4.250925] usbcore: registered new interface driver usbtouchscreen [ 4.253271] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 [ 4.491511] i2c-parport-light: adapter type unspecified [ 4.492126] usbcore: registered new interface driver i2c-tiny-usb [ 4.492976] pps pps0: new PPS source ktimer [ 4.493443] pps pps0: ktimer PPS source registered [ 4.494393] Driver for 1-wire Dallas network protocol. [ 4.495050] usbcore: registered new interface driver DS9490R [ 4.495976] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 4.497008] power_supply test_ac: uevent [ 4.497436] power_supply test_ac: POWER_SUPPLY_NAME=test_ac [ 4.498035] power_supply test_ac: prop ONLINE=1 [ 4.498571] power_supply test_ac: power_supply_changed [ 4.499217] power_supply test_ac: power_supply_changed_work [ 4.499827] power_supply test_ac: power_supply_update_gen_leds 1 [ 4.500510] power_supply test_ac: uevent [ 4.500931] power_supply test_ac: POWER_SUPPLY_NAME=test_ac [ 4.501533] power_supply test_ac: prop ONLINE=1 [ 4.502726] power_supply test_battery: uevent [ 4.503201] power_supply test_battery: POWER_SUPPLY_NAME=test_battery [ 4.503892] power_supply test_battery: prop STATUS=Discharging [ 4.504518] power_supply test_battery: prop CHARGE_TYPE=Fast [ 4.505113] power_supply test_battery: prop HEALTH=Good [ 4.505673] power_supply test_battery: prop PRESENT=1 [ 4.506210] power_supply test_battery: prop TECHNOLOGY=Li-ion [ 4.506824] power_supply test_battery: prop CHARGE_FULL_DESIGN=100 [ 4.507487] power_supply test_battery: prop CHARGE_FULL=100 [ 4.508080] power_supply test_battery: prop CHARGE_NOW=50 [ 4.508659] power_supply test_battery: prop CAPACITY=50 [ 4.509213] power_supply test_battery: prop CAPACITY_LEVEL=Normal [ 4.509862] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600 [ 4.510559] power_supply test_battery: prop TIME_TO_FULL_NOW=3600 [ 4.511199] power_supply test_battery: prop MODEL_NAME=Test battery [ 4.511863] power_supply test_battery: prop MANUFACTURER=Linux [ 4.512482] power_supply test_battery: prop SERIAL_NUMBER=3.10.0-rc7-wl-01596-gb53e037 [ 4.513299] power_supply test_battery: prop TEMP=26 [ 4.513826] power_supply test_battery: prop VOLTAGE_NOW=3300 [ 4.528473] power_supply test_battery: power_supply_changed [ 4.529110] power_supply test_battery: power_supply_changed_work [ 4.529754] power_supply test_battery: power_supply_update_bat_leds 2 [ 4.530475] power_supply test_battery: uevent [ 4.530997] power_supply test_battery: POWER_SUPPLY_NAME=test_battery [ 4.531698] power_supply test_battery: prop STATUS=Discharging [ 4.532315] power_supply test_battery: prop CHARGE_TYPE=Fast [ 4.532920] power_supply test_battery: prop HEALTH=Good [ 4.533477] power_supply test_battery: prop PRESENT=1 [ 4.534007] power_supply test_battery: prop TECHNOLOGY=Li-ion [ 4.534618] power_supply test_battery: prop CHARGE_FULL_DESIGN=100 [ 4.535267] power_supply test_battery: prop CHARGE_FULL=100 [ 4.535866] power_supply test_battery: prop CHARGE_NOW=50 [ 4.536442] power_supply test_battery: prop CAPACITY=50 [ 4.536992] power_supply test_battery: prop CAPACITY_LEVEL=Normal [ 4.537642] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600 [ 4.538287] power_supply test_battery: prop TIME_TO_FULL_NOW=3600 [ 4.538931] power_supply test_battery: prop MODEL_NAME=Test battery [ 4.539596] power_supply test_battery: prop MANUFACTURER=Linux [ 4.540243] power_supply test_battery: prop SERIAL_NUMBER=3.10.0-rc7-wl-01596-gb53e037 [ 4.541077] power_supply test_battery: prop TEMP=26 [ 4.541602] power_supply test_battery: prop VOLTAGE_NOW=3300 [ 4.542265] power_supply test_usb: uevent [ 4.542705] power_supply test_usb: POWER_SUPPLY_NAME=test_usb [ 4.543315] power_supply test_usb: prop ONLINE=1 [ 4.556904] power_supply test_usb: power_supply_changed [ 4.557504] power_supply test_usb: power_supply_changed_work [ 4.558104] power_supply test_usb: power_supply_update_gen_leds 1 [ 4.558752] power_supply test_usb: uevent [ 4.559178] power_supply test_usb: POWER_SUPPLY_NAME=test_usb [ 4.559796] power_supply test_usb: prop ONLINE=1 [ 7.590087] i2c i2c-0: detect fail: address match, 0x2c [ 7.630101] i2c i2c-0: detect fail: address match, 0x2d [ 7.670096] i2c i2c-0: detect fail: address match, 0x2e [ 7.710103] i2c i2c-0: detect fail: address match, 0x2f [ 8.090944] applesmc: supported laptop not found! [ 8.091446] applesmc: driver init failed (ret=-19)! [ 27.780335] pc87360: PC8736x not detected, module not inserted [ 28.431147] intel_powerclamp: Intel powerclamp does not run on family 15 model 6 [ 28.431943] Bluetooth: Virtual HCI driver ver 1.3 [ 28.432513] usbcore: registered new interface driver bcm203x [ 28.433133] usbcore: registered new interface driver bpa10x [ 28.434033] usbcore: registered new interface driver btusb [ 28.434614] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 28.435230] usbcore: registered new interface driver ath3k [ 28.437127] cpuidle: using governor ladder [ 28.437575] cpuidle: using governor menu [ 28.437993] sdhci: Secure Digital Host Controller Interface driver [ 28.438637] sdhci: Copyright(c) Pierre Ossman [ 28.439185] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400 [ 28.444572] usbcore: registered new interface driver vub300 [ 28.445249] usbcore: registered new interface driver ushc [ 28.445875] sdhci-pltfm: SDHCI platform and OF driver helper [ 28.447869] ledtrig-cpu: registered to indicate activity on CPUs [ 28.451140] hidraw: raw HID events driver (C) Jiri Kosina [ 28.454250] usbcore: registered new interface driver usbhid [ 28.454857] usbhid: USB HID core driver [ 28.455335] goldfish_pdev_bus goldfish_pdev_bus: unable to reserve Goldfish MMIO. [ 28.456127] goldfish_pdev_bus: probe of goldfish_pdev_bus failed with error -16 [ 28.461445] no UART detected at 0x1 [ 28.462605] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 28.463302] evbug: Connected device: input2 (PC Speaker at isa0061/input0) [ 28.465419] PCSP: CONFIG_DEBUG_PAGEALLOC is enabled, which may make the sound noisy. [ 28.466555] usbcore: registered new interface driver snd-usb-audio [ 28.467239] usbcore: registered new interface driver snd-usb-usx2y [ 28.467926] usbcore: registered new interface driver snd-usb-us122l [ 28.468615] usbcore: registered new interface driver snd-usb-caiaq [ 28.469287] usbcore: registered new interface driver snd-usb-6fire [ 28.470308] oprofile: using NMI interrupt. [ 28.470834] pktgen: Packet Generator for packet performance testing. Version: 2.74 [ 28.472062] netem: version 1.3 [ 28.472473] gre: GRE over IPv4 demultiplexor driver [ 28.473004] ip_gre: GRE over IPv4 tunneling driver [ 28.474990] TCP: bic registered [ 28.475339] TCP: cubic registered [ 28.475704] TCP: westwood registered [ 28.476084] TCP: hybla registered [ 28.476435] TCP: htcp registered [ 28.476785] TCP: vegas registered [ 28.477137] TCP: veno registered [ 28.477480] TCP: lp registered [ 28.477817] TCP: illinois registered [ 28.478252] NET: Registered protocol family 10 [ 28.480173] mip6: Mobile IPv6 [ 28.480521] NET: Registered protocol family 15 [ 28.481058] NET: Registered protocol family 4 [ 28.481570] can: controller area network core (rev 20120528 abi 9) [ 28.482263] NET: Registered protocol family 29 [ 28.482745] can: broadcast manager protocol (rev 20120528 t) [ 28.484655] Bluetooth: RFCOMM socket layer initialized [ 28.485203] Bluetooth: RFCOMM ver 1.11 [ 28.485607] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 28.486233] Bluetooth: HIDP socket layer initialized [ 28.486815] NET: Registered protocol family 33 [ 28.487289] Key type rxrpc registered [ 28.487683] Key type rxrpc_s registered [ 28.488094] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team [ 28.489267] DECnet: Routing cache hash table of 256 buckets, 9Kbytes [ 28.489979] NET: Registered protocol family 12 [ 28.491233] DCCP: Activated CCID 2 (TCP-like) [ 28.492009] sctp: Hash tables configured (established 1638 bind 1820) [ 28.493064] sctp: sctp_init_sock(sk: 7e7f6000) [ 28.493797] NET: Registered protocol family 21 [ 28.494346] Registered RDS/iwarp transport [ 28.494818] Registered RDS/infiniband transport [ 28.495292] tipc: Activated (version 2.0.0) [ 28.496207] NET: Registered protocol family 30 [ 28.496690] tipc: Started in single node mode [ 28.497469] NET: Registered protocol family 37 [ 28.497961] NET: Registered protocol family 36 [ 28.498460] Key type ceph registered [ 28.498914] libceph: loaded (mon/osd proto 15/24) [ 28.501742] batman_adv: B.A.T.M.A.N. advanced 2013.2.0 (compatibility version 14) loaded [ 28.502596] openvswitch: Open vSwitch switching datapath [ 28.505202] [ 28.505202] printing PIC contents [ 28.505728] ... PIC IMR: ffff [ 28.506058] ... PIC IRR: 1013 [ 28.506994] ... PIC ISR: 0000 [ 28.507326] ... PIC ELCR: 0c00 [ 28.507702] printing local APIC contents on CPU#0/0: [ 28.508341] ... APIC ID: 00000000 (0) [ 28.508951] ... APIC VERSION: 00050014 [ 28.509391] ... APIC TASKPRI: 00000000 (00) [ 28.509843] ... APIC PROCPRI: 00000000 [ 28.510281] ... APIC LDR: 01000000 [ 28.510659] ... APIC DFR: ffffffff [ 28.511027] ... APIC SPIV: 000001ff [ 28.511470] ... APIC ISR field: [ 28.511591] 0000000000000000000000000000000000000000000000000000000000000000 [ 28.511591] ... APIC TMR field: [ 28.511591] 0000000002000000000000000000000000000000000000000000000000000000 [ 28.511591] ... APIC IRR field: [ 28.511591] 0000000000000000000000000000000000000000000000000000000000008000 [ 28.511591] ... APIC ESR: 00000000 [ 28.511591] ... APIC ICR: 000008fd [ 28.511591] ... APIC ICR2: 02000000 [ 28.511591] ... APIC LVTT: 000000ef [ 28.511591] ... APIC LVTPC: 00010000 [ 28.511591] ... APIC LVT0: 00010700 [ 28.511591] ... APIC LVT1: 00000400 [ 28.511591] ... APIC LVTERR: 000000fe [ 28.511591] ... APIC TMICT: 0008041b [ 28.511591] ... APIC TMCCT: 00000000 [ 28.511591] ... APIC TDCR: 00000003 [ 28.511591] [ 28.520488] number of MP IRQ sources: 15. [ 28.520934] number of IO-APIC #0 registers: 24. [ 28.521408] testing the IO APIC....................... [ 28.521967] IO APIC #0...... [ 28.522278] .... register #00: 00000000 [ 28.522687] ....... : physical APIC id: 00 [ 28.523144] ....... : Delivery Type: 0 [ 28.523574] ....... : LTS : 0 [ 28.523995] .... register #01: 00170011 [ 28.524395] ....... : max redirection entries: 17 [ 28.524927] ....... : PRQ implemented: 0 [ 28.525374] ....... : IO APIC version: 11 [ 28.525836] .... register #02: 00000000 [ 28.526237] ....... : arbitration: 00 [ 28.526663] .... IRQ redirection table: [ 28.527077] 1 0 0 0 0 0 0 00 [ 28.529005] 0 0 0 0 0 1 1 31 [ 28.529489] 0 0 0 0 0 1 1 30 [ 28.529992] 0 0 0 0 0 1 1 33 [ 28.530502] 1 0 0 0 0 1 1 34 [ 28.530996] 1 1 0 0 0 1 1 35 [ 28.531480] 0 0 0 0 0 1 1 36 [ 28.531972] 0 0 0 0 0 1 1 37 [ 28.532454] 0 0 0 0 0 1 1 38 [ 28.532947] 0 1 0 0 0 1 1 39 [ 28.533430] 1 1 0 0 0 1 1 3A [ 28.533920] 1 1 0 0 0 1 1 3B [ 28.534402] 0 0 0 0 0 1 1 3C [ 28.534891] 0 0 0 0 0 1 1 3D [ 28.535376] 0 0 0 0 0 1 1 3E [ 28.535868] 0 0 0 0 0 1 1 3F [ 28.536351] 1 0 0 0 0 0 0 00 [ 28.536841] 1 0 0 0 0 0 0 00 [ 28.537325] 1 0 0 0 0 0 0 00 [ 28.537818] 1 0 0 0 0 0 0 00 [ 28.538301] 1 0 0 0 0 0 0 00 [ 28.538789] 1 0 0 0 0 0 0 00 [ 28.539270] 1 0 0 0 0 0 0 00 [ 28.539758] 1 0 0 0 0 0 0 00 [ 28.540249] IRQ to pin mappings: [ 28.540602] IRQ0 -> 0:2 [ 28.540894] IRQ1 -> 0:1 [ 28.541760] IRQ3 -> 0:3 [ 28.542054] IRQ4 -> 0:4 [ 28.542347] IRQ5 -> 0:5 [ 28.542649] IRQ6 -> 0:6 [ 28.542941] IRQ7 -> 0:7 [ 28.543235] IRQ8 -> 0:8 [ 28.543528] IRQ9 -> 0:9 [ 28.543826] IRQ10 -> 0:10 [ 28.544137] IRQ11 -> 0:11 [ 28.544448] IRQ12 -> 0:12 [ 28.544764] IRQ13 -> 0:13 [ 28.545073] IRQ14 -> 0:14 [ 28.545382] IRQ15 -> 0:15 [ 28.545699] .................................... done. [ 28.546237] Using IPI No-Shortcut mode [ 28.547660] registered taskstats version 1 [ 28.552982] Key type trusted registered [ 28.554285] Key type encrypted registered [ 28.558810] dmaengine: __dma_request_channel: fail ((null)) [ 28.560142] ALSA device list: [ 28.560471] #0: Dummy 1 [ 28.560762] #1: Internal PC-Speaker at port 0x61 [ 28.562110] debug: unmapping init [mem 0x79dca000-0x79e73fff] [ 28.563462] Write protecting the kernel text: 8592k [ 28.564300] Write protecting the kernel read-only data: 4304k mountall: Event failed * Asking all remaining processes to terminate... * Killing all remaining processes... udevd[2550]: inotify_init failed: Function not implemented udevd[2550]: error initializing inotify * Deactivating swap... udevd[2562]: error initializing inotify udevd[2567]: inotify_init failed: Function not implemented udevd[2567]: error initializing inotify udevd[2573]: inotify_init failed: Function not implemented udevd[2573]: error initializing inotify udevd[2576]: inotify_init failed: Function not implemented udevd[2576]: error initializing inotify umount: /run/lock: not mounted udevd[2580]: error: runtime directory '/run/udev' not writable, for now falling back to '/dev/.udev' udevd[2582]: inotify_init failed: Function not implemented udevd[2582]: error initializing inotify udevd[2583]: error: runtime directory '/run/udev' not writable, for now falling back to '/dev/.udev' udevd[2586]: inotify_init failed: Function not implemented udevd[2586]: error initializing inotify udevd[2589]: error: runtime directory '/run/udev' not writable, for now falling back to '/dev/.udev' udevd[2590]: inotify_init failed: Function not implemented udevd[2590]: error initializing inotify udevd[2592]: error: runtime directory '/run/udev' not writable, for now falling back to '/dev/.udev' * Will now restart udevd[2593]: inotify_init failed: Function not implemented udevd[2593]: error initializing inotify udevd[2594]: error: runtime directory '/run/udev' not writable, for now falling back to '/dev/.udev' udevd[2596]: inotify_init failed: Function not implemented udevd[2596]: error initializing inotify udevd[2597]: error: runtime directory '/run/udev' not writable, for now falling back to '/dev/.udev' udevd[2598]: inotify_init failed: Function not implemented udevd[2598]: error initializing inotify [ 40.660982] Unregister pv shared memory for cpu 1 [ 40.661497] Unregister pv shared memory for cpu 0 [ 40.668675] power_supply test_ac: uevent [ 40.674208] Restarting system. [ 40.674210] reboot: machine restart Elapsed time: 45 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /tmp//kernel/i386-randconfig-s07-0628/b53e037930134d11fa6307162b41fb19b6c43643/vmlinuz-3.10.0-rc7-wl-01596-gb53e037-10423 -append 'hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-s07-0628/devel-snb-i386-201306280352/.vmlinuz-b53e037930134d11fa6307162b41fb19b6c43643-20130628043743-2-vp branch=linux-devel/devel-snb-i386-201306280352 BOOT_IMAGE=/kernel/i386-randconfig-s07-0628/b53e037930134d11fa6307162b41fb19b6c43643/vmlinuz-3.10.0-rc7-wl-01596-gb53e037' -initrd /kernel-tests/initrd/quantal-core-i386.cgz -m 256M -smp 2 -net nic,vlan=0,macaddr=00:00:00:00:00:00,model=virtio -net user,vlan=0,hostfwd=tcp::14519-:22 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -drive file=/fs/LABEL=KVM/diska-vp-10423,media=disk,if=virtio -drive file=/fs/LABEL=KVM/diskb-vp-10423,media=disk,if=virtio -drive file=/fs/LABEL=KVM/diskc-vp-10423,media=disk,if=virtio -drive file=/fs/LABEL=KVM/diskd-vp-10423,media=disk,if=virtio -drive file=/fs/LABEL=KVM/diske-vp-10423,media=disk,if=virtio -drive file=/fs/LABEL=KVM/diskf-vp-10423,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vp-lkp-10423 -serial file:/dev/shm/kboot/serial-vp-lkp-10423 -daemonize -display none -monitor null