| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 2 Jul 2013 23:51:52 +0100
From: Mark Brown <broonie@...nel.org>
To: Liam Girdwood <lgirdwood@...il.com>
Cc: Chao Xie <chao.xie@...vell.com>, Yi Zhang <yizhang@...vell.com>,
linux-kernel@...r.kernel.org, patches@...nsource.wolfsonmicro.com,
linaro-kernel@...ts.linaro.org, Mark Brown <broonie@...aro.org>
Subject: [PATCH 2/4] regulator: wm8400: Use linear ranges
From: Mark Brown <broonie@...aro.org>
Signed-off-by: Mark Brown <broonie@...aro.org>
---
drivers/regulator/wm8400-regulator.c | 50 ++++++++++++------------------------
1 file changed, 16 insertions(+), 34 deletions(-)
diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c
index a09f03e..2ac7e1a 100644
--- a/drivers/regulator/wm8400-regulator.c
+++ b/drivers/regulator/wm8400-regulator.c
@@ -19,47 +19,21 @@
#include <linux/regulator/driver.h>
#include <linux/mfd/wm8400-private.h>
-static int wm8400_ldo_list_voltage(struct regulator_dev *dev,
- unsigned selector)
-{
- if (selector > WM8400_LDO1_VSEL_MASK)
- return -EINVAL;
-
- if (selector < 15)
- return 900000 + (selector * 50000);
- else
- return 1700000 + ((selector - 15) * 100000);
-}
-
-static int wm8400_ldo_map_voltage(struct regulator_dev *dev,
- int min_uV, int max_uV)
-{
- u16 val;
- int volt;
-
- if (min_uV < 900000 || min_uV > 3300000)
- return -EINVAL;
-
- if (min_uV < 1700000) /* Steps of 50mV from 900mV; */
- val = DIV_ROUND_UP(min_uV - 900000, 50000);
- else /* Steps of 100mV from 1700mV */
- val = DIV_ROUND_UP(min_uV - 1700000, 100000) + 15;
-
- volt = wm8400_ldo_list_voltage(dev, val);
- if (volt < min_uV || volt > max_uV)
- return -EINVAL;
-
- return val;
-}
+static const struct regulator_linear_range wm8400_ldo_ranges[] = {
+ { .min_uV = 900000, .max_uV = 1600000, .min_sel = 0, .max_sel = 14,
+ .uV_step = 50000 },
+ { .min_uV = 1700000, .max_uV = 3300000, .min_sel = 15, .max_sel = 31,
+ .uV_step = 100000 },
+};
static struct regulator_ops wm8400_ldo_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
- .list_voltage = wm8400_ldo_list_voltage,
+ .list_voltage = regulator_list_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
- .map_voltage = wm8400_ldo_map_voltage,
+ .map_voltage = regulator_map_voltage_linear_range,
};
static unsigned int wm8400_dcdc_get_mode(struct regulator_dev *dev)
@@ -155,6 +129,8 @@ static struct regulator_desc regulators[] = {
.enable_reg = WM8400_LDO1_CONTROL,
.enable_mask = WM8400_LDO1_ENA,
.n_voltages = WM8400_LDO1_VSEL_MASK + 1,
+ .linear_ranges = wm8400_ldo_ranges,
+ .n_linear_ranges = ARRAY_SIZE(wm8400_ldo_ranges),
.vsel_reg = WM8400_LDO1_CONTROL,
.vsel_mask = WM8400_LDO1_VSEL_MASK,
.type = REGULATOR_VOLTAGE,
@@ -167,6 +143,8 @@ static struct regulator_desc regulators[] = {
.enable_reg = WM8400_LDO2_CONTROL,
.enable_mask = WM8400_LDO2_ENA,
.n_voltages = WM8400_LDO2_VSEL_MASK + 1,
+ .linear_ranges = wm8400_ldo_ranges,
+ .n_linear_ranges = ARRAY_SIZE(wm8400_ldo_ranges),
.type = REGULATOR_VOLTAGE,
.vsel_reg = WM8400_LDO2_CONTROL,
.vsel_mask = WM8400_LDO2_VSEL_MASK,
@@ -179,6 +157,8 @@ static struct regulator_desc regulators[] = {
.enable_reg = WM8400_LDO3_CONTROL,
.enable_mask = WM8400_LDO3_ENA,
.n_voltages = WM8400_LDO3_VSEL_MASK + 1,
+ .linear_ranges = wm8400_ldo_ranges,
+ .n_linear_ranges = ARRAY_SIZE(wm8400_ldo_ranges),
.vsel_reg = WM8400_LDO3_CONTROL,
.vsel_mask = WM8400_LDO3_VSEL_MASK,
.type = REGULATOR_VOLTAGE,
@@ -191,6 +171,8 @@ static struct regulator_desc regulators[] = {
.enable_reg = WM8400_LDO4_CONTROL,
.enable_mask = WM8400_LDO4_ENA,
.n_voltages = WM8400_LDO4_VSEL_MASK + 1,
+ .linear_ranges = wm8400_ldo_ranges,
+ .n_linear_ranges = ARRAY_SIZE(wm8400_ldo_ranges),
.vsel_reg = WM8400_LDO4_CONTROL,
.vsel_mask = WM8400_LDO4_VSEL_MASK,
.type = REGULATOR_VOLTAGE,
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists