| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20130702231706.GF24642@n2100.arm.linux.org.uk>
Date: Wed, 3 Jul 2013 00:17:06 +0100
From: Russell King - ARM Linux <linux@....linux.org.uk>
To: Arnd Bergmann <arnd@...db.de>
Cc: Linus Torvalds <torvalds@...ux-foundation.org>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
arm@...nel.org
Subject: Re: [GIT PULL 3/7] ARM SoC specific changes
Please don't merge this yet.
Arnd has just done the worst possible thing - the arm-soc tree has taken
bits of my tree, merged them into their own tree, had the same conflicts
I've had, and then resolved them differently.
The result is that when these two trees now merge, they conflict on the
conflict resolutions. This is utter madness.
This has also only _just_ happened.
On Tue, Jul 02, 2013 at 09:04:01PM +0200, Arnd Bergmann wrote:
> The following changes since commit 7d132055814ef17a6c7b69f342244c410a5e000f:
>
> Linux 3.10-rc6 (2013-06-15 11:51:07 -1000)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/soc-for-linus
>
> for you to fetch changes up to 1eb92b24e243085d242cf5ffd64829bba70972e1:
>
> ARM: integrator: let pciv3 use mem/premem from device tree (2013-06-27 14:19:54 +0200)
>
> ----------------------------------------------------------------
> ARM SoC specific changes
>
> These changes are all to SoC-specific code, a total of 33 branches on
> 17 platforms were pulled into this. Like last time, Renesas sh-mobile
> is now the platform with the most changes, followed by OMAP and EXYNOS.
>
> Two new platforms, TI Keystone and Rockchips RK3xxx are added in
> this branch, both containing almost no platform specific code at all,
> since they are using generic subsystem interfaces for clocks, pinctrl,
> interrupts etc. The device drivers are getting merged through the
> respective subsystem maintainer trees.
>
> One more SoC (u300) is now multiplatform capable and several others
> (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
> towards that goal with this series but need more work.
>
> Also noteworthy is the work on PCI here, which is traditionally part of
> the SoC specific code. With the changes done by Thomas Petazzoni, we can
> now more easily have PCI host controller drivers as loadable modules and
> keep them separate from the platform code in drivers/pci/host. This has
> already led to the discovery that three platforms (exynos, spear and imx)
> are actually using an identical PCIe host controller and will be able
> to share a driver once support for spear and imx is added.
>
> Conflicts:
> * asm/glue-proc.h has one CPU type getting added that conflicts
> with another addition in 3.10-rc7
> * Simple context changes in arch/arm/Makefile and arch/arm/Kconfig
>
> ----------------------------------------------------------------
>
> Afzal Mohammed (9):
> ARM: OMAP2+: separate out OMAP4 restart
> ARM: OMAP2+: AM43x: Kconfig
> ARM: OMAP2+: AM43x: kbuild
> ARM: OMAP2+: AM43x: soc_is support
> ARM: OMAP2+: AM437x: SoC revision detection
> ARM: OMAP2+: AM43x: static mapping
> ARM: OMAP2+: AM43x: early init
> ARM: OMAP2+: AM43x: GP or HS ?
> ARM: OMAP2+: AM43x: basic dt support
>
> Aida Mynzhasova (2):
> ARM: OMAP2: TI81XX: id: Add cpu id for TI816x ES2.0 and ES2.1
> ARM: OMAP: TI816X: add powerdomains for TI816x
>
> Alexander Shiyan (18):
> GPIO: clps711x: Rewrite driver for using generic GPIO code
> GPIO: clps711x: Add DT support
> ARM: clps711x: Re-add GPIO support
> ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency
> ARM: clps711x: Set PLL clock to zero if we work from 13 mHz source
> ARM: clps711x: autcpu12: Move LCD DPOT definitions to board file
> ARM: clps711x: autcpu12: Add support for NOR flash
> ARM: clps711x: autcpu12: Special driver for handling memory is removed
> ARM: clps711x: autcpu12: Move remaining specific definitions to board file
> ARM: clps711x: p720t: Define PLD registers as GPIOs
> ARM: clps711x: Move specific definitions from hardware.h to boards files
> ARM: clps711x: Replace "arch_initcall" in common code with ".init_early"
> ARM: clps711x: Add clocksource framework
> ARM: clps711x: Optimize interrupt handling
> ARM: clps711x: edb7211: Add support for I2C
> ARM: clps711x: edb7211: Control LCD backlight via PWM
> ARM: clps711x: Add support for SYSCON driver
> ARM: clps711x: Update defconfig
>
> Andrew Lunn (3):
> ARM: Kirkwood: Enable USB 3.0 in kirkwood_defconfig
> arm: kirkwood: Enable cpufreq and ondemand on kirkwood_defconfig
> arm: kirkwood: Instantiate cpufreq driver
>
> Arnaud Ebalard (1):
> arm: kirkwood: NETGEAR ReadyNAS Duo v2 init PCIe via DT
>
> Arnd Bergmann (27):
> drivers/bus: arm-cci: fix combined ARMv6+v7 build
> ARM: EXYNOS: Remove custom init_irq callbacks
> ARM: EXYNOS: Use exynos_init_io() as map_io callback
> ARM: EXYNOS: Remove legacy L2X0 initialization
> ARM: EXYNOS: Remove remaining dead code after non-DT support removal
> Merge tag 'integrator-pci-for-arm-soc' of git://git.kernel.org/.../linusw/linux-integrator into next/soc
> Merge tag 'u300-multiplatform' of git://git.kernel.org/.../linusw/linux-stericsson into next/soc
> Merge tag 'imx-soc-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc
> ARM: u300: only build for ARCH_MULTI_V5
> Merge tag 'davinci-for-v3.11/soc-v2' of git://git.kernel.org/.../nsekhar/linux-davinci into next/soc
> Merge tag 'sunxi-defconfig-for-3.11' of git://github.com/mripard/linux into next/soc
> Merge tag 'sunxi-core-for-3.11-2' of git://github.com/mripard/linux into next/soc
> Merge tag 'omap-for-v3.11/soc-part2-signed' of git://git.kernel.org/.../tmlind/linux-omap into next/soc
> Merge branch 'omap/pm-voltdomain-cleanup' into next/soc
> Merge tag 'exynos-arch-2' of git://git.kernel.org/.../kgene/linux-samsung into next/soc
> Merge tag 'remove-nondt-exynos-3' of git://git.kernel.org/.../kgene/linux-samsung into next/soc
> Merge tag 'samsung-defconfig-1' of git://git.kernel.org/.../kgene/linux-samsung into next/soc
> Merge tag 'v3.11-rockchip-basics' of git://git.kernel.org/.../mmind/linux-rockchip into next/soc
> Merge tag 'renesas-cleanup-boot-for-v3.11' of git://git.kernel.org/.../horms/renesas into next/soc
> Merge tag 'regmap-3.11-2' of git://git.infradead.org/users/jcooper/linux into next/soc
> ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1
> ARM: keystone: select ARM_ERRATA_798181 only for SMP
> ARM: imx: select syscon for IMX6SL
> ARM: multiplatform: always pick one CPU type
> Merge tag 'davinci-for-v3.11/soc-2' of git://git.kernel.org/.../nsekhar/linux-davinci into next/soc
> Merge tag 'omap-pm-v3.11/fixes/omap5-voltdm' of git://git.kernel.org/.../khilman/linux-omap-pm into next/soc
> Merge tag 'soc-for-linus' into for-linus
>
> Bastian Hecht (5):
> sh-pfc: Add entries for INTC external IRQs
> sh-pfc: r8a7740: Add SCIFA1 data group
> ARM: shmobile: armadillo800eva: Convert SCIFA1 to pinctrl
> ARM: shmobile: r8a7740: Add interim sh-eth device name to clocks list
> ARM: shmobile: r8a7740: Add I2C DT clock names
>
> Benoit Cousson (7):
> ARM: OMAP5: PRM: Add OMAP54XX register and bitfield files
> ARM: OMAP5: CM: Add OMAP54XX register and bitfield files
> ARM: OMAP5: PRCM: Add OMAP54XX local MPU PRCM registers
> ARM: OMAP5: SCRM: Add OMAP54XX header file.
> ARM: OMAP5: clockdomain data: Add OMAP54XX data and update the header
> ARM: OMAP5: powerdomain data: Add OMAP54XX data and update the header
> ARM: OMAP5: hwmod data: Create initial OMAP5 SOC hwmod data
>
> Catalin Marinas (1):
> ARM: Add base support for ARMv7-M
>
> Dave Martin (1):
> ARM: vexpress/dcscb: handle platform coherency exit/setup and CCI
>
> Dinh Nguyen (2):
> ARM: socfpga: Add support to gate peripheral clocks
> ARM: socfpga: Add syscon to be part of socfpga
>
> Dirk Behme (3):
> ARM: i.MX6: add i.MX6 specific L2 cache configuration
> ARM: i.MX6: clk: add i.MX6 DualLite differences
> ARM: i.MX6: clk: add different DualLite MLB clock config
>
> Dmitry Osipenko (1):
> ARM: tegra: emc: correction of ram-code parsing from dt
>
> Doug Anderson (1):
> ARM: EXYNOS: Select PINCTRL_EXYNOS for exynos4/5 at chip level
>
> Ezequiel Garcia (1):
> ARM: mvebu: Add support for USB storage class in mvebu_defconfig
>
> Fabio Estevam (6):
> ARM: imx: imx_v6_v7_defconfig: Select CONFIG_DRM_IMX_TVE
> ARM: imx: Enable mx6 solo-lite support
> ARM: imx: irq-common: Include header to avoid sparse warning
> ARM: imx: clk: No need to initialize phandle struct
> ARM: imx_v6_v7_defconfig: Enable PWM and backlight options
> ARM: imx_v6_v7_defconfig: Enable Vybrid VF610
>
> Guennadi Liakhovetski (9):
> pinctrl: sh-pfc: fix r8a7790 Function Select register tables
> pinctrl: sh-pfc: fix a typo in pfc-r8a7790
> pinctrl: r8a7790: add pinmux data for MMCIF and SDHI interfaces
> ARM: shmobile: sh73a0: add support for adjusting CPU frequency
> ARM: shmobile: sh73a0: add CPUFreq support
> ARM: shmobile: sh73a0: do not overwrite all div4 clock operations
> ARM: shmobile: sh73a0: div4 clocks must check the kick bit before changing rate
> ARM: shmobile: r8a73a4: add clock definitions and aliases for MMCIF and SDHI
> ARM: shmobile: r8a7790: add clock definitions and aliases for MMCIF and SDHI
>
> Heiko Stuebner (10):
> ARM: S3C24XX: split s3c2412 spi dma channels
> ARM: S3C24XX: dma-s3c2443 - do not write into arbitary bits
> ARM: S3C24XX: remove obsolete s3c2412 specific dma settings
> clocksource: dw_apb_timer_of: enable the use the clocksource as sched clock
> clocksource: dw_apb_timer_of: add clock-handling
> clocksource: dw_apb_timer_of: select DW_APB_TIMER
> clocksource: dw_apb_timer_of: use clocksource_of_init
> arm: Add basic clocks for Rockchip rk3066a SoCs
> arm: add debug uarts for rockchip rk29xx and rk3xxx series
> arm: add basic support for Rockchip RK3066a boards
>
> Huang Shijie (1):
> ARM: imx6q: clk: add the eim_slow clock
>
> Jason Cooper (3):
> ARM: kirkwood: enable Sheevaplug DT in defconfig
> Merge tag 'tags/fixes-non-3.11-1' into mvebu/regmap
> Merge tag 'tags/cleanup-3.11-3' into mvebu/regmap
>
> Jiada Wang (2):
> ARM: imx: disable pll8_mlb in mx6q_clks
> ARM: imx: remove MLB PLL from pllv3
>
> Jingchang Lu (2):
> ARM: imx: add VF610 clock support
> ARM: imx: add initial support for VF610
>
> Jingoo Han (4):
> pci: Add PCIe driver for Samsung Exynos
> ARM: EXYNOS: Enable PCIe support for Exynos5440
> ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC
> ARM: dts: Add pcie controller node for exynos5440-ssdk5440
>
> Jon Medhurst (2):
> ARM: Enable selection of SMP operations at boot time
> ARM: vexpress: Select multi-cluster SMP operation if required
>
> Joseph Lo (12):
> ARM: tegra: add an assembly marco to check Tegra SoC ID
> ARM: tegra: skip SCU and PL310 code when CPU is not Cortex-A9
> ARM: tegra: make tegra_resume can work for Tegra114
> ARM: tegra114: add power up sequence for warm boot CPU
> clk: tegra114: implement wait_for_reset and disable_clock for tegra_cpu_car_ops
> ARM: tegra114: add CPU hotplug support
> ARM: tegra: add cpu_disable for hotplug
> ARM: tegra: remove ifdef in the tegra_resume
> ARM: tegra: cpuidle: move the init function behind the suspend init function
> ARM: tegra: hook tegra_tear_down_cpu function in the PM suspend init function
> ARM: tegra: cpuidle: using IS_ENABLED for multi SoCs management in init func
> ARM: tegra: don't pass CPU ID to tegra_{set,clear}_cpu_in_lp2
>
> Koji Matsuoka (1):
> sh-pfc: Initial r8a7790 PFC support
>
> Kukjin Kim (1):
> ARM: EXYNOS: no more support non-DT for EXYNOS SoCs
>
> Kuninori Morimoto (35):
> gpio-rcar: R-Car GPIO IRQ share interrupt
> ARM: shmobile: add GPIO IRQ macro
> ARM: shmobile: r8a7778: Register PFC device
> sh-pfc: Add r8a7778 pinmux support
> sh-pfc: r8a7779: use RCAR_GP_PIN() on _GP_GPIO() macro
> sh-pfc: r8a7778: add common PFC macro helper
> sh-pfc: r8a7778: add SDHI support
> sh-pfc: r8a7778: tidyup SDHI naming suffixes and sort it alphabetically
> ARM: shmobile: r8a7778: add GPIO support
> sh-pfc: r8a7778: fixup IRQ1A settings
> sh-pfc: r8a7778: add I2C pin groups
> sh-pfc: r8a7778: add HSPI pin groups
> sh-pfc: r8a7778: add MMCIF pin groups
> ARM: shmobile: kzm9g: tidyup FSI pinctrl
> ARM: shmobile: bockw: add pinctrl support
> ARM: shmobile: remove ";" from SH_FIXED_RATIO_CLK*() macro
> ARM: shmobile: use do{ }while() on SH_CLK_SET_RATIO()
> ARM: shmobile: r8a7778: fixup Ether setup code position
> ARM: shmobile: r8a73a4: add main clock
> ARM: shmobile: r8a73a4: add pll clocks
> ARM: shmobile: r8a73a4: add div4 clocks
> ARM: shmobile: r8a73a4: add div6 clocks
> ARM: shmobile: r8a7778: use fixed ratio clock
> ARM: shmobile: r8a7778: add SDHI clock support
> ARM: shmobile: r8a7778: Register SDHI device
> ARM: shmobile: r8a7790: add main clock
> ARM: shmobile: r8a7790: add div4 clocks
> ARM: shmobile: r8a7790: add div6 clocks
> ARM: shmobile: r8a7778: add support I2C clock
> ARM: shmobile: r8a7778: add support HSPI clock
> ARM: shmobile: r8a7778: add support MMC clock
> ARM: shmobile: r8a7778: add support I2C driver
> ARM: shmobile: r8a7778: add support HSPI driver
> ARM: shmobile: r8a7778: add support MMC driver
> ARM: shmobile: Remove Bonito board support
>
> Lad, Prabhakar (2):
> ARM: davinci: remove __init atrribute from function declaration
> ARM: edma: Convert to devm_* api
>
> Laurent Pinchart (102):
> gpio-rcar: Make the platform data gpio_base field signed
> gpio-rcar: Add RCAR_GP_PIN macro
> sh-pfc: Remove dependency on GPIOLIB
> sh-pfc: r8a7790: Add ETH pin groups and functions
> sh-pfc: r8a7790: Add INTC pin groups and functions
> sh-pfc: r8a7790: Add SCIF, SCIFA and SCIFB pin groups and functions
> sh-pfc: r8a7790: Remove GPIO data
> sh-pfc: r8a7790: Remove function GPIOs
> sh-pfc: r8a7790: Don't use GPIO enum entries
> sh-pfc: r8a7779: Replace hardcoded pin numbers with RCAR_GP_PIN macro
> sh-pfc: sh7372: Add BSC pin groups and functions
> sh-pfc: sh7372: Add CEU pin groups and functions
> sh-pfc: sh7372: Add FLCTL pin groups and functions
> sh-pfc: sh7372: Add FSI pin groups and functions
> sh-pfc: sh7372: Add HDMI pin groups and functions
> sh-pfc: sh7372: Add INTC pin groups and functions
> sh-pfc: sh7372: Add KEYSC pin groups and functions
> sh-pfc: sh7372: Add LCDC pin groups and functions
> sh-pfc: sh7372: Add SCIF pin groups and functions
> sh-pfc: sh7372: Add USB pin groups and functions
> ARM: shmobile: mackerel: Register pinctrl mapping for the ADXL34X
> ARM: shmobile: mackerel: Register pinctrl mapping for CEU
> ARM: shmobile: mackerel: Register pinctrl mapping for FLCTL
> ARM: shmobile: mackerel: Register pinctrl mapping for FSI
> ARM: shmobile: mackerel: Register pinctrl mapping for HDMI
> ARM: shmobile: mackerel: Register pinctrl mapping for LCD
> ARM: shmobile: mackerel: Register pinctrl mapping for SCIF
> ARM: shmobile: mackerel: Register IRQ pinctrl mapping for SDHI0
> ARM: shmobile: mackerel: Register pinctrl mapping for SMSC911x
> ARM: shmobile: mackerel: Register pinctrl mapping for ST1232
> ARM: shmobile: mackerel: Register pinctrl mapping for TCA6416
> ARM: shmobile: mackerel: Register pinctrl mapping for USBHS
> ARM: shmobile: ap4evb: Register pinctrl mapping for CEU
> ARM: shmobile: ap4evb: Register pinctrl mapping for FSI
> ARM: shmobile: ap4evb: Register pinctrl mapping for HDMI
> ARM: shmobile: ap4evb: Register pinctrl mapping for KEYSC
> ARM: shmobile: ap4evb: Register pinctrl mapping for LCD
> ARM: shmobile: ap4evb: Register pinctrl mapping for SCIF
> ARM: shmobile: ap4evb: Register pinctrl mapping for SMSC911x
> ARM: shmobile: ap4evb: Simplify tsc2007 pen state read function
> ARM: shmobile: ap4evb: Register pinctrl mapping for TSC2007
> ARM: shmobile: ap4evb: Register pinctrl mapping for USBHS
> sh-pfc: sh7372: Replace GPIO_PORTx enum with GPIO port numbers
> sh-pfc: sh7372: Remove function GPIOs
> ARM: shmobile: sh7372: Remove all GPIOs
> sh-pfc: sh7372: Add bias (pull-up/down) pinconf support
> sh-pfc: r8a7740: Add SCIF pin groups and functions
> sh-pfc: r8a7740: Declare missing INTC function
> sh-pfc: r8a7740: Add BSC pin groups and functions
> sh-pfc: r8a7740: Add GETHER pin groups and functions
> sh-pfc: r8a7740: Add CEU pin groups and functions
> sh-pfc: r8a7740: Add FSI pin groups and functions
> sh-pfc: r8a7740: Add HDMI pin groups and functions
> sh-pfc: r8a7740: Hardcode the LCDC0 output
> ARM: shmobile: armadillo800eva: Register pinctrl mapping for INTC
> ARM: shmobile: armadillo800eva: Register pinctrl mapping for GETHER
> ARM: shmobile: armadillo800eva: Register pinctrl mapping for CEU0
> ARM: shmobile: armadillo800eva: Register pinctrl mapping for FSI
> ARM: shmobile: armadillo800eva: Register pinctrl mapping for HDMI
> ARM: shmobile: armadillo800eva: Don't configure LCDC routing manually
> ARM: shmobile: armadillo800eva: Replace GPIO_PORTx with GPIO port numbers
> ARM: shmobile: bonito: Remove empty core devices array
> ARM: shmobile: bonito: Register pinctrl mapping for SCIF
> ARM: shmobile: bonito: Register pinctrl mapping for INTC
> ARM: shmobile: bonito: Register pinctrl mapping for BSC
> ARM: shmobile: bonito: Don't configure LCDC routing manually
> sh-pfc: r8a7740: Remove SCIF function GPIOS
> sh-pfc: r8a7740: Remove INTC function GPIOS
> sh-pfc: r8a7740: Remove BSC function GPIOS
> sh-pfc: r8a7740: Remove GETHER function GPIOS
> sh-pfc: r8a7740: Remove CEU function GPIOS
> sh-pfc: r8a7740: Remove FSI function GPIOS
> sh-pfc: r8a7740: Remove HDMI function GPIOS
> ARM: shmobile: r8a7740: Remove SCIF function GPIOs
> ARM: shmobile: r8a7740: Remove INTC function GPIOs
> ARM: shmobile: r8a7740: Remove BSC function GPIOs
> ARM: shmobile: r8a7740: Remove GETHER function GPIOs
> ARM: shmobile: r8a7740: Remove CEU function GPIOs
> ARM: shmobile: r8a7740: Remove FSI function GPIOs
> ARM: shmobile: r8a7740: Remove HDMI function GPIOs
> sh-pfc: r8a7740: Remove function GPIOs
> sh-pfc: r8a7740: Replace GPIO_PORTx enum with GPIO port numbers
> ARM: shmobile: r8a7740: Remove all GPIOs
> sh-pfc: r8a7740: Add bias (pull-up/down) pinconf support
> sh-pfc: r8a7778: Fix outdated GPIO_FN comments
> ARM: shmobile: r8a7790: Register GPIO devices
> ARM: shmobile: r8a7790: Remove all GPIOs
> sh-pfc: Add support for SoC-specific initialization
> sh-pfc: sh73a0: Add VCCQ MC0 regulator
> ARM: shmobile: kzm9g: Remove the VCCQ MC0 function GPIO
> ARM: shmobile: kzm9g-reference: Remove the VCCQ MC0 function GPIO
> sh-pfc: sh73a0: Add TPU pin groups and functions
> sh-pfc: r8a7740: Add TPU pin groups and functions
> sh-pfc: r8a7790: Add TPU pin groups and functions
> sh-pfc: sh73a0: Remove function GPIOs
> Revert "ARM: shmobile: Disallow PINCTRL without GPIOLIB"
> ARM: shmobile: lager: Initialize pinmux
> ARM: shmobile: marzen: Use RCAR_GP_PIN macro
> ARM: shmobile: r8a7740: Make private clock arrays static
> ARM: shmobile: r8a7740: add TPU PWM support
> ARM: shmobile: r8a7790: Make private clock arrays static
> ARM: shmobile: r8a7790: add TPU PWM support
>
> Leela Krishna Amudala (1):
> ARM: EXYNOS: call scu_enable() only in case of cortex-A9 processor
>
> Linus Walleij (51):
> ARM: u300: enable delaytimer on the U300
> ARM: u300: device tree support for the timer
> pinctrl: u300 device tree support
> pinctrl: coh901: add device tree support
> ARM: u300: basic device tree support
> i2c: stu300: device tree support
> ARM: u300: register I2C bus drivers from device tree
> watchdog: coh901327: devicetree support
> ARM: u300: add the COH 901 327 watchdog to device tree
> Documentation/devicetree: add a small note on PCI
> ARM: pci: create pci_common_init_dev()
> ARM: integrator: merge PCIv3 driver into one file
> ARM: integrator: convert PCIv3 bridge to platform device
> ARM: integrator: grab PCI error IRQ in probe()
> ARM: integrator: move PCI base address grab to probe
> ARM: integrator: move V3 register definitions into driver
> ARM: integrator: remap PCIv3 base dynamically
> ARM: integrator: move VGA base assignment
> ARM: integrator: move static ioremapping into PCIv3 driver
> ARM: integrator: basic PCIv3 device tree support
> rtc: coh901331: add devicetree support
> ARM: u300: add RTC to device tree
> ARM: u300: set up board power from device tree
> ARM: u300: support regulators in the device tree
> ARM: u300: enable MMC/SD card from device tree
> dma: coh901318: add devicetree support
> ARM: u300: augment device tree with DMA channels
> ARM: u300: add the COH 901 318 DMAC to device tree
> ARM: u300: add SPI PL022 to the device tree
> ARM: u300: probe the U300 dummy-spichip from device tree
> ARM: u300: add FSMC flash into the device tree
> ARM: u300: delete all static board data
> ARM: u300: move debugmacro to debug includes
> ARM: u300: remove deps from debug macro
> ARM: u300: push down syscon registers
> ARM: u300: delete <mach/hardware.h>
> ARM: u300: delete <mach/irqs.h>
> ARM: u300: localize <mach/u300-regs.h>
> ARM: u300: convert to multiplatform
> ARM: u300: delete remnant machine headers
> ARM: u300: add syscon node
> ARM: u300: remove register definition file
> clk: move the U300 fixed and fixed-factor to DT
> i2c: stu300: do not request a specific clock name
> ARM: u300: move the gated system controller clocks to DT
> ARM: u300: convert MMC/SD clock to device tree
> pinctrl: get rid of all platform data for coh901
> spi: pl022: use DMA by default when probing from DT
> ARM: u300: switch to using syscon regmap for board
> ARM: integrator: set local side PCI addresses right
> ARM: integrator: let pciv3 use mem/premem from device tree
>
> Lorenzo Pieralisi (1):
> drivers: bus: add ARM CCI support
>
> Magnus Damm (17):
> ARM: shmobile: r8a7779 pinmux platform device cleanup
> ARM: shmobile: r8a7740 pinmux platform device cleanup
> ARM: shmobile: sh73a0: Always use shmobile_setup_delay()
> ARM: shmobile: uImage load address rework
> ARM: shmobile: Let romImage rely on default ATAGS
> ARM: shmobile: Remove romImage CONFIG_MEMORY_START
> ARM: shmobile: Rework sh7372 sleep code to use virt_to_phys()
> ARM: shmobile: Add SMP boot function and argument
> ARM: shmobile: Add SCU boot function using argument
> ARM: shmobile: r8a7779 SMP with SCU boot fn and args
> ARM: shmobile: sh73a0 SMP with SCU boot fn and args
> ARM: shmobile: EMEV2 SMP with SCU boot fn and args
> ARM: shmobile: Remove old SCU boot code
> ARM: shmobile: Enable ARM_PATCH_PHYS_VIRT
> ARM: shmobile: Remove MEMORY_START/SIZE
> ARM: shmobile: Remove mach/memory.h
> ARM: shmobile: Remove AP4EVB board support
>
> Markus Pargmann (1):
> ARM: imx: Remove mxc specific ulpi access ops
>
> Martin Fuzzey (1):
> ARM: i.MX5: Allow DT clock providers
>
> Matt Porter (6):
> ARM: davinci: move private EDMA API to arm/common
> ARM: edma: remove unused transfer controller handlers
> dmaengine: edma: Add TI EDMA device tree binding
> ARM: edma: Add DT and runtime PM support to the private EDMA API
> ARM: edma: Add EDMA crossbar event mux support
> dmaengine: edma: enable build for AM33XX
>
> Maxime Ripard (2):
> ARM: sunxi: Add Allwinner A10s machine compatible
> ARM: multi_v7: Enable Allwinner EMAC in multi_v7_defconfig
>
> Mohammed, Afzal (1):
> ARM: OMAP2+: AM43x: resolve SMP related build error
>
> Nicolas Pitre (4):
> drivers/bus: arm-cci: function to enable CCI ports from early boot code
> ARM: vexpress: introduce DCSCB support
> ARM: vexpress/dcscb: add CPU use counts to the power up/down API implementation
> ARM: vexpress/dcscb: do not hardcode number of CPUs per cluster
>
> Nicolin Chen (2):
> ARM: clk-imx6qdl: Add clko1 configuration for imx6qdl-sabresd
> ARM: imx_v6_v7_defconfig: Enable imx-wm8962 by default
>
> Nishanth Menon (1):
> ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
>
> Olof Johansson (22):
> Merge tag 'soc-3.11-2' of git://git.infradead.org/users/jcooper/linux into next/soc
> Merge tag 'defconfig-3.11-3' of git://git.infradead.org/users/jcooper/linux into next/soc
> Merge tag 'pcie-3.11-2' of git://git.infradead.org/users/jcooper/linux into next/soc
> Merge tag 'pcie_kw-3.11' of git://git.infradead.org/users/jcooper/linux into next/soc
> Merge tag 'pcie_bridge-3.11' of git://git.infradead.org/users/jcooper/linux into next/soc
> Merge tag 'seb_clk-3.11' of git://git.infradead.org/users/jcooper/linux into next/soc
> Merge branch 'depends/rmk-devel-stable' into next/soc
> Merge branch 'VExpress_DCSCB' of git://git.linaro.org/people/nico/linux into next/soc
> Merge tag 'zynq-clk-for-3.11' of git://git.xilinx.com/linux-xlnx into next/soc
> Merge tag 'pcie_kw-3.11-2' of git://git.infradead.org/users/jcooper/linux into next/soc
> Merge tag 'renesas-pinmux-for-v3.11' of git://git.kernel.org/.../horms/renesas into next/soc
> Merge tag 'renesas-soc-for-v3.11' of git://git.kernel.org/.../horms/renesas into next/soc
> Merge branch 'clps711x/soc' into next/soc
> Merge tag 's3c24xx-arch-1' of git://git.kernel.org/.../kgene/linux-samsung into next/soc
> Merge tag 'omap-for-v3.11/pm-signed' of git://git.kernel.org/.../tmlind/linux-omap into next/soc
> Merge tag 'omap-for-v3.11/soc-signed' of git://git.kernel.org/.../tmlind/linux-omap into next/soc
> Merge tag 'omap-for-v3.11/omap5-signed' of git://git.kernel.org/.../tmlind/linux-omap into next/soc
> Merge tag 'regmap-3.11' of git://git.infradead.org/users/jcooper/linux into next/soc
> Merge tag 'renesas-phy-rcar-usb-for-v3.11' of git://git.kernel.org/.../horms/renesas into next/soc
> Merge tag 'renesas-soc2-for-v3.11' of git://git.kernel.org/.../horms/renesas into next/soc
> Merge tag 'tegra-for-3.11-soc' of git://git.kernel.org/.../swarren/linux-tegra into next/soc
> Merge tag 'keystone-soc-for-arm-soc' of git://git.kernel.org/.../ssantosh/linux-keystone into next/soc
>
> Peter Huewe (1):
> ARM: u300 use module_spi_driver to register driver
>
> Phil Edworthy (2):
> pinctrl: sh-pfc: r8a7779: Fix missing MOD_SEL2 entry
> ARM: shmobile: r8a7779: Add PCIe clocks
>
> Philip Avinash (1):
> ARM: AM33XX: clk: Add clock node for EHRPWM TBCLK
>
> Philipp Zabel (1):
> ARM i.MX5: Add S/PDIF clocks
>
> Rob Herring (1):
> ARM: introduce common set_auxcr/get_auxcr functions
>
> Roger Quadros (1):
> ARM: OMAP3: clock data: get rid of unused USB host clock aliases and dummies
>
> Rogerio Pimentel (1):
> ARM: imx_v6_v7_defconfig: enable parallel display
>
> Russell King (2):
> Merge branch 'for-next' of git://git.pengutronix.de/git/ukl/linux into devel-stable
> Merge tag '3.10-rc2-psci-ops-11-tag' of git://git.kernel.org/.../sstabellini/xen into devel-stable
>
> Sanjeev Premi (1):
> ARM: OMAP2+: AM43x: SRAM base and size
>
> Santosh Shilimkar (13):
> ARM: OMAP4: PM: Avoid expensive cpu_suspend() path for all CPU power states except off
> ARM: OMAP4+: PM: Consolidate MPU subsystem PM code for re-use
> ARM: OMAP4+: Make secondary_startup function name more consistent
> ARM: OMAP4+: PM: Consolidate OMAP4 PM code to re-use it for OMAP5
> ARM: OMAP4+: PRM: Move function prototypes to common header for re-use
> ARM: OMAP4+: CM: Move function prototypes to common header for re-use
> ARM: OMAP4+: PRCM MPU: Move function prototypes to common header for re-use
> ARM: OMAP5: voltagedomain data: Add OMAP5 voltage domain data
> ARM: OMAP5: Enable build and frameowrk initialisations
> ARM: dts: keystone: Add minimal Keystone SOC device tree data
> ARM: keystone: Add minimal TI Keystone platform support
> ARM: keystone: Enable SMP support on Keystone machines
> ARM: keystone: Move CPU bringup code to dedicated asm file
>
> Sascha Hauer (1):
> ARM i.MX53: Add SATA clock
>
> Sebastian Hesselbarth (10):
> clk: mvebu: introduce per-clock-gate flags
> clk: mvebu: add common clock functions for core clk and clk gating
> clk: mvebu: add Dove SoC-centric clock init
> clk: mvebu: add Kirkwood SoC-centric clock init
> clk: mvebu: add Armada 370 SoC-centric clock init
> clk: mvebu: add Armada XP SoC-centric clock init
> ARM: dove: move DT boards to SoC-centric clock init
> ARM: kirkwood: move DT boards to SoC-centric clock init
> ARM: mvebu: move DT boards to SoC-centric clock init
> clk: mvebu: disintegrate obsolete file
>
> Sergei Shtylyov (18):
> sh-pfc: r8a7778: add USB pin groups
> sh-pfc: r8a7778: add Ether pin groups
> sh-pfc: r8a7779: add Ether pin groups
> ARM: shmobile: r8a7778: correct model name in Kconfig
> ARM: shmobile: r8a7779: fix Ether device name
> ARM: shmobile: r8a7778: fix Ether device name
> ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
> ehci-platform: add pre_setup() method to platform data
> ARM: shmobile: r8a7779: setup EHCI internal buffer
> phy-rcar-usb: remove EHCI internal buffer setup
> ARM: shmobile: r8a7779: remove USB PHY 2nd memory resource
> phy-rcar-usb: correct base address
> phy-rcar-usb: add platform data
> ARM: shmobile: Marzen: pass platform data to USB PHY device
> phy-rcar-usb: handle platform data
> phy-rcar-usb: add R8A7778 support
> ARM: shmobile: r8a7778: add USB support
> ARM: shmobile: BOCK-W: add USB support
>
> Shawn Guo (8):
> ARM: imx: include <asm/io.h> in hardware.h
> ARM: imx: move clk_prepare() out from mxc_restart()
> ARM: imx: create mxc_arch_reset_init_dt() for DT boot
> ARM: imx: add clock support for imx6sl
> ARM: imx: enable low-level debug support for imx6sl
> ARM: imx: add initial support for imx6sl
> ARM: imx6q: call of_clk_init() to register fixed rate clocks
> ARM: imx6: use common of_clk_init() call to initialize clocks
>
> Simon Horman (4):
> gpio-rcar: Add support for IRQ_TYPE_EDGE_BOTH
> ARM: shmobile: r8a7790: Configure R-Car GPIO for IRQ_TYPE_EDGE_BOTH
> ARM: shmobile: sh73a0: Use DEFINE_RES_MEM*() everywhere
> Merge branches 'heads/pinmux' and 'heads/soc' into phy-rcar-usb-base
>
> Soren Brinkmann (4):
> clk: zynq: Factor out PLL driver
> clk: zynq: Add clock controller driver
> arm: zynq: Migrate platform to clock controller
> clk: zynq: Remove deprecated clock code
>
> Stefano Stabellini (1):
> arm: introduce psci_smp_ops
>
> Thomas Petazzoni (27):
> arm: kirkwood: use the default of match table
> arm: mvebu: update defconfig with PCI and USB support
> clk: mvebu: create parent-child relation for PCIe clocks on Armada 370
> clk: mvebu: add more PCIe clocks for Armada XP
> pci: PCIe driver for Marvell Armada 370/XP systems
> arm: mvebu: PCIe support is now available on mvebu
> arm: kirkwood: update defconfig with PCIe driver and board updates
> pci: mvebu: no longer fake the slot location of downstream devices
> pci: mvebu: allow the enumeration of devices beyond physical bridges
> pci: mvebu: fix the emulation of the status register
> pci: mvebu: enable driver usage on Kirkwood
> arm: kirkwood: move PCIe window init to legacy driver
> arm: kirkwood: add SoC-level Device Tree data for PCIe interfaces
> arm: kirkwood: convert Iomega Iconnect to use DT for the PCIe interface
> arm: kirkwood: convert MPL CEC4 to use DT for the PCIe interface
> arm: kirkwood: convert ZyXEL NSA310 to use DT for the PCIe interface
> arm: kirkwood: convert QNAP TS219 to use DT for the PCIe interface
> arm: kirkwood: convert db-88f6281/db-88f6282 to the Device Tree
> arm: mvebu: remove dependency of SMP init on static I/O mapping
> arm: mvebu: avoid hardcoded virtual address in coherency code
> arm: mvebu: move cache and mvebu-mbus initialization later
> arm: mvebu: remove hardcoded static I/O mapping
> arm: mvebu: don't hardcode a physical address in headsmp.S
> arm: mvebu: don't hardcode the physical address for mvebu-mbus
> arm: mvebu: add another earlyprintk Kconfig option
> arm: mvebu: disable DEBUG_LL/EARLY_PRINTK in defconfig
> arm: mvebu: fix coherency_late_init() for multiplatform
>
> Tomasz Figa (30):
> ARM: EXYNOS: Remove unused board files
> ARM: EXYNOS: Make ARCH_EXYNOS select USE_OF
> ARM: SAMSUNG: Introduce SAMSUNG_ATAGS Kconfig entry
> ARM: EXYNOS: Remove legacy PMU initialization code
> ARM: EXYNOS: Remove legacy EINT initialization code
> ARM: EXYNOS: Remove legacy UART initialization code
> ARM: EXYNOS: Remove legacy dev- and setup- files
> ARM: EXYNOS: Remove legacy interrupt initialization code
> ARM: EXYNOS: Remove legacy timer initialization code
> ARM: EXYNOS: Remove platform device initialization
> ARM: EXYNOS: Remove legacy mapping of chip ID block
> ARM: EXYNOS: Remove check for device tree presence
> ARM: EXYNOS: Remove legacy power domain registration code
> ARM: SAMSUNG: Introduce GPIO_SAMSUNG Kconfig entry
> ARM: EXYNOS: Provide compatibility stubs for PM code in pm-core.h header
> ARM: SAMSUNG: Compile legacy IRQ and GPIO PM code only with ATAGS support
> platform: Check for ARCH_EXYNOS separately
> USB: Check for ARCH_EXYNOS separately
> ARM: EXYNOS: Decouple ARCH_EXYNOS from PLAT_S5P
> ARM: SAMSUNG: Include most of mach/ headers conditionally
> ARM: EXYNOS: Do not select legacy Kconfig symbols any more
> ARM: EXYNOS: Remove setup-i2c0.c
> ARM: EXYNOS: Remove mach/gpio.h
> ARM: EXYNOS: Remove mach/regs-gpio.h header
> ARM: SAMSUNG: Make legacy MFC support code depend on SAMSUNG_ATAGS
> ARM: EXYNOS: Select SPARSE_IRQ for Exynos
> ARM: EXYNOS: Remove mach/irqs.h header
> ARM: EXYNOS: Remove unused base addresses from mach/map.h header
> thermal: exynos: Support both EXYNOS4X12 SoCs
> ARM: EXYNOS: Remove mach/regs-usb-phy.h header
>
> Tony Lindgren (4):
> Merge tag 'omap-pm-v3.10/cleanup/pm' of git://git.kernel.org/.../khilman/linux-omap-pm into omap-for-v3.11/pm
> Merge tag 'omap-devel-b-for-3.11' of http://git.kernel.org/cgit/linux/kernel/git/pjw/omap-pending into omap-for-v3.11/soc
> Merge tag 'omap-devel-a-for-3.11' of git://git.kernel.org/.../pjw/omap-pending into omap-for-v3.11/omap5
> ARM: OMAP5: Remove unused include for ocp2scp
>
> Tushar Behera (1):
> ARM: exynos_defconfig: Enable GPIO buttons and RTC drivers
>
> Ulf Hansson (1):
> ARM: u300: Update MMC configs for u300 defconfig
>
> Ulrich Hecht (1):
> ARM: shmobile: r8a7790: HSCIF support
>
> Uwe Kleine-König (3):
> ARM: ARMv7-M: Add support for exception handling
> ARM: ARMv7-M: Allow the building of new kernel port
> ARM: ARMv7-M: implement read_cpuid_ext
>
> Vaibhav Hiremath (2):
> ARM: OMAP2+: AM33xx: Add missing reset status info to GFX hwmod
> ARM: OMAP3+: am33xx id: Add new am33xx specific function to check dev_feature
>
> Vivek Gautam (1):
> ARM: EXYNOS: Enable XHCI support on exynos5
>
> Vladimir Barinov (2):
> sh-pfc: r8a7779: add VIN pin groups
> sh-pfc: r8a7778: add VIN pin groups
>
> Wei Yongjun (1):
> pci: mvebu: fix return value check in mvebu_pcie_probe()
>
> Documentation/arm/sunxi/README | 4 +
> Documentation/devicetree/bindings/arm/cci.txt | 172 +
> .../devicetree/bindings/arm/keystone/keystone.txt | 10 +
> .../devicetree/bindings/arm/rtsm-dcscb.txt | 19 +
> Documentation/devicetree/bindings/arm/ste-u300.txt | 46 +
> .../devicetree/bindings/clock/imx5-clock.txt | 13 +
> .../devicetree/bindings/clock/imx6q-clock.txt | 1 +
> .../devicetree/bindings/clock/imx6sl-clock.txt | 10 +
> .../bindings/clock/ste-u300-syscon-clock.txt | 80 +
> .../devicetree/bindings/clock/vf610-clock.txt | 26 +
> .../devicetree/bindings/clock/zynq-7000.txt | 123 +-
> .../devicetree/bindings/dma/ste-coh901318.txt | 32 +
> Documentation/devicetree/bindings/dma/ti-edma.txt | 34 +
> .../devicetree/bindings/gpio/gpio-clps711x.txt | 28 +
> .../bindings/gpio/gpio-stericsson-coh901.txt | 7 +
> .../devicetree/bindings/i2c/i2c-st-ddci2c.txt | 15 +
> .../devicetree/bindings/pci/designware-pcie.txt | 73 +
> .../devicetree/bindings/pci/mvebu-pci.txt | 221 ++
> Documentation/devicetree/bindings/pci/pci.txt | 9 +
> .../devicetree/bindings/pci/v3-v360epc-pci.txt | 15 +
> Documentation/devicetree/bindings/rtc/dw-apb.txt | 19 +
> .../bindings/timer/stericsson-u300-apptimer.txt | 18 +
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> .../bindings/watchdog/stericsson-coh901327.txt | 19 +
> arch/arm/Kconfig | 64 +-
> arch/arm/Kconfig-nommu | 2 +-
> arch/arm/Kconfig.debug | 101 +-
> arch/arm/Makefile | 4 +
> arch/arm/boot/compressed/head-shmobile.S | 21 +-
> arch/arm/boot/dts/Makefile | 3 +
> arch/arm/boot/dts/exynos5440-ssdk5440.dts | 8 +
> arch/arm/boot/dts/exynos5440.dtsi | 40 +-
> arch/arm/boot/dts/integratorap.dts | 41 +
> arch/arm/boot/dts/keystone.dts | 117 +
> arch/arm/boot/dts/kirkwood-6281.dtsi | 31 +
> arch/arm/boot/dts/kirkwood-6282.dtsi | 48 +
> arch/arm/boot/dts/kirkwood-db-88f6281.dts | 30 +
> arch/arm/boot/dts/kirkwood-db-88f6282.dts | 34 +
> arch/arm/boot/dts/kirkwood-db.dtsi | 89 +
> arch/arm/boot/dts/kirkwood-iconnect.dts | 8 +
> arch/arm/boot/dts/kirkwood-mplcec4.dts | 8 +
> .../boot/dts/kirkwood-netgear_readynas_duo_v2.dts | 8 +
> arch/arm/boot/dts/kirkwood-nsa310.dts | 8 +
> arch/arm/boot/dts/kirkwood-ts219-6281.dts | 3 +-
> arch/arm/boot/dts/kirkwood-ts219-6282.dts | 3 +-
> arch/arm/boot/dts/kirkwood-ts219.dtsi | 9 +-
> arch/arm/boot/dts/kirkwood.dtsi | 1 +
> arch/arm/boot/dts/rk3066a-clocks.dtsi | 299 ++
> arch/arm/boot/dts/rk3066a.dtsi | 390 ++
> arch/arm/boot/dts/ste-u300.dts | 473 +++
> arch/arm/boot/dts/zynq-7000.dtsi | 71 +-
> arch/arm/boot/dts/zynq-zc702.dts | 4 -
> arch/arm/common/Kconfig | 3 +
> arch/arm/common/Makefile | 1 +
> arch/arm/{mach-davinci/dma.c => common/edma.c} | 368 +-
> arch/arm/configs/ap4evb_defconfig | 56 -
> arch/arm/configs/bonito_defconfig | 72 -
> arch/arm/configs/clps711x_defconfig | 8 +-
> arch/arm/configs/exynos_defconfig | 3 +
> arch/arm/configs/imx_v6_v7_defconfig | 10 +
> arch/arm/configs/keystone_defconfig | 157 +
> arch/arm/configs/kirkwood_defconfig | 10 +-
> arch/arm/configs/multi_v7_defconfig | 2 +
> arch/arm/configs/mvebu_defconfig | 6 +-
> arch/arm/configs/u300_defconfig | 14 +-
> arch/arm/include/asm/assembler.h | 17 +-
> arch/arm/include/asm/cp15.h | 14 +
> arch/arm/include/asm/cputype.h | 44 +-
> arch/arm/include/asm/glue-cache.h | 27 +
> arch/arm/include/asm/glue-df.h | 8 +
> arch/arm/include/asm/glue-proc.h | 9 +
> arch/arm/include/asm/hardware/pci_v3.h | 186 -
> arch/arm/include/asm/irqflags.h | 22 +-
> arch/arm/include/asm/mach/arch.h | 5 +
> arch/arm/include/asm/mach/pci.h | 17 +-
> arch/arm/include/asm/psci.h | 9 +
> arch/arm/include/asm/ptrace.h | 4 +
> arch/arm/include/asm/system_info.h | 1 +
> arch/arm/include/asm/v7m.h | 44 +
> arch/arm/include/debug/imx-uart.h | 10 +
> arch/arm/include/debug/keystone.S | 43 +
> arch/arm/include/debug/mvebu.S | 5 +
> arch/arm/include/debug/rockchip.S | 42 +
> .../mach/debug-macro.S => include/debug/u300.S} | 9 +-
> arch/arm/include/uapi/asm/ptrace.h | 35 +-
> arch/arm/kernel/Makefile | 13 +-
> arch/arm/kernel/bios32.c | 9 +-
> arch/arm/kernel/entry-common.S | 4 +
> arch/arm/kernel/entry-header.S | 124 +
> arch/arm/kernel/entry-v7m.S | 143 +
> arch/arm/kernel/head-nommu.S | 10 +-
> arch/arm/kernel/psci.c | 7 +-
> arch/arm/kernel/psci_smp.c | 84 +
> arch/arm/kernel/setup.c | 26 +-
> arch/arm/kernel/traps.c | 8 +
> arch/arm/mach-clps711x/Kconfig | 3 +-
> arch/arm/mach-clps711x/Makefile | 5 +-
> arch/arm/mach-clps711x/board-autcpu12.c | 133 +-
> arch/arm/mach-clps711x/board-cdb89712.c | 3 +
> arch/arm/mach-clps711x/board-clep7312.c | 1 +
> arch/arm/mach-clps711x/board-edb7211.c | 34 +-
> arch/arm/mach-clps711x/board-fortunet.c | 1 +
> arch/arm/mach-clps711x/board-p720t.c | 254 +-
> arch/arm/mach-clps711x/common.c | 89 +-
> arch/arm/mach-clps711x/common.h | 1 +
> arch/arm/mach-clps711x/devices.c | 68 +
> arch/arm/mach-clps711x/devices.h | 12 +
> arch/arm/mach-clps711x/include/mach/autcpu12.h | 59 -
> arch/arm/mach-clps711x/include/mach/clps711x.h | 88 +-
> arch/arm/mach-clps711x/include/mach/hardware.h | 7 -
> arch/arm/mach-clps711x/include/mach/memory.h | 41 -
> arch/arm/mach-clps711x/include/mach/syspld.h | 116 -
> arch/arm/mach-davinci/Makefile | 2 +-
> arch/arm/mach-davinci/board-tnetv107x-evm.c | 2 +-
> arch/arm/mach-davinci/davinci.h | 30 +-
> arch/arm/mach-davinci/devices-da8xx.c | 8 +-
> arch/arm/mach-davinci/devices-tnetv107x.c | 6 +-
> arch/arm/mach-davinci/devices.c | 6 +-
> arch/arm/mach-davinci/dm355.c | 6 +-
> arch/arm/mach-davinci/dm365.c | 6 +-
> arch/arm/mach-davinci/dm644x.c | 6 +-
> arch/arm/mach-davinci/dm646x.c | 6 +-
> arch/arm/mach-davinci/include/mach/cp_intc.h | 4 +-
> arch/arm/mach-davinci/include/mach/da8xx.h | 18 +-
> arch/arm/mach-davinci/include/mach/tnetv107x.h | 6 +-
> arch/arm/mach-dove/Kconfig | 3 +-
> arch/arm/mach-dove/board-dt.c | 3 +-
> arch/arm/mach-dove/common.c | 1 -
> arch/arm/mach-exynos/Kconfig | 352 +-
> arch/arm/mach-exynos/Makefile | 33 -
> arch/arm/mach-exynos/common.c | 547 +--
> arch/arm/mach-exynos/common.h | 4 +-
> arch/arm/mach-exynos/dev-ahci.c | 255 --
> arch/arm/mach-exynos/dev-audio.c | 254 --
> arch/arm/mach-exynos/dev-ohci.c | 52 -
> arch/arm/mach-exynos/dev-uart.c | 55 -
> arch/arm/mach-exynos/dma.c | 322 --
> arch/arm/mach-exynos/firmware.c | 22 +-
> arch/arm/mach-exynos/include/mach/gpio.h | 289 --
> arch/arm/mach-exynos/include/mach/irqs.h | 476 ---
> arch/arm/mach-exynos/include/mach/map.h | 214 --
> arch/arm/mach-exynos/include/mach/pm-core.h | 12 +-
> arch/arm/mach-exynos/include/mach/regs-gpio.h | 40 -
> arch/arm/mach-exynos/include/mach/regs-usb-phy.h | 74 -
> arch/arm/mach-exynos/mach-armlex4210.c | 207 --
> arch/arm/mach-exynos/mach-exynos4-dt.c | 8 +-
> arch/arm/mach-exynos/mach-exynos5-dt.c | 8 +-
> arch/arm/mach-exynos/mach-nuri.c | 1388 -------
> arch/arm/mach-exynos/mach-origen.c | 823 -----
> arch/arm/mach-exynos/mach-smdk4x12.c | 396 --
> arch/arm/mach-exynos/mach-smdkv310.c | 444 ---
> arch/arm/mach-exynos/mach-universal_c210.c | 1159 ------
> arch/arm/mach-exynos/platsmp.c | 2 +-
> arch/arm/mach-exynos/pm.c | 1 -
> arch/arm/mach-exynos/pm_domains.c | 101 +-
> arch/arm/mach-exynos/setup-fimc.c | 44 -
> arch/arm/mach-exynos/setup-fimd0.c | 43 -
> arch/arm/mach-exynos/setup-i2c0.c | 29 -
> arch/arm/mach-exynos/setup-i2c1.c | 23 -
> arch/arm/mach-exynos/setup-i2c2.c | 23 -
> arch/arm/mach-exynos/setup-i2c3.c | 23 -
> arch/arm/mach-exynos/setup-i2c4.c | 23 -
> arch/arm/mach-exynos/setup-i2c5.c | 23 -
> arch/arm/mach-exynos/setup-i2c6.c | 23 -
> arch/arm/mach-exynos/setup-i2c7.c | 23 -
> arch/arm/mach-exynos/setup-keypad.c | 36 -
> arch/arm/mach-exynos/setup-sdhci-gpio.c | 152 -
> arch/arm/mach-exynos/setup-spi.c | 45 -
> arch/arm/mach-exynos/setup-usb-phy.c | 223 --
> arch/arm/mach-imx/Kconfig | 65 +-
> arch/arm/mach-imx/Makefile | 4 +-
> arch/arm/mach-imx/clk-imx51-imx53.c | 73 +-
> arch/arm/mach-imx/clk-imx6q.c | 48 +-
> arch/arm/mach-imx/clk-imx6sl.c | 267 ++
> arch/arm/mach-imx/clk-pllv3.c | 10 -
> arch/arm/mach-imx/clk-vf610.c | 319 ++
> arch/arm/mach-imx/clk.c | 35 +
> arch/arm/mach-imx/clk.h | 4 +-
> arch/arm/mach-imx/common.h | 2 +-
> arch/arm/mach-imx/hardware.h | 1 +
> arch/arm/mach-imx/imx25-dt.c | 2 +
> arch/arm/mach-imx/imx27-dt.c | 2 +
> arch/arm/mach-imx/imx31-dt.c | 2 +
> arch/arm/mach-imx/imx51-dt.c | 2 +
> arch/arm/mach-imx/irq-common.c | 1 +
> arch/arm/mach-imx/mach-imx53.c | 3 +
> arch/arm/mach-imx/mach-imx6q.c | 81 +-
> arch/arm/mach-imx/mach-imx6sl.c | 52 +
> arch/arm/mach-imx/mach-pca100.c | 4 +-
> arch/arm/mach-imx/mach-vf610.c | 48 +
> arch/arm/mach-imx/mm-imx1.c | 2 +-
> arch/arm/mach-imx/mm-imx21.c | 2 +-
> arch/arm/mach-imx/mm-imx25.c | 2 +-
> arch/arm/mach-imx/mm-imx27.c | 2 +-
> arch/arm/mach-imx/mm-imx3.c | 4 +-
> arch/arm/mach-imx/mm-imx5.c | 3 +-
> arch/arm/mach-imx/system.c | 47 +-
> arch/arm/mach-imx/ulpi.c | 118 -
> arch/arm/mach-imx/ulpi.h | 11 +-
> arch/arm/mach-integrator/Makefile | 2 +-
> arch/arm/mach-integrator/include/mach/platform.h | 23 -
> arch/arm/mach-integrator/integrator_ap.c | 31 +-
> arch/arm/mach-integrator/pci.c | 113 -
> arch/arm/mach-integrator/pci_v3.c | 564 ++-
> arch/arm/mach-integrator/pci_v3.h | 2 +
> arch/arm/mach-keystone/Kconfig | 15 +
> arch/arm/mach-keystone/Makefile | 6 +
> arch/arm/mach-keystone/Makefile.boot | 1 +
> arch/arm/mach-keystone/keystone.c | 75 +
> arch/arm/mach-keystone/keystone.h | 23 +
> arch/arm/mach-keystone/platsmp.c | 43 +
> arch/arm/mach-keystone/smc.S | 29 +
> arch/arm/mach-kirkwood/Kconfig | 24 +-
> arch/arm/mach-kirkwood/Makefile | 3 +-
> arch/arm/mach-kirkwood/board-db88f628x-bp.c | 24 +
> arch/arm/mach-kirkwood/board-dt.c | 18 +-
> arch/arm/mach-kirkwood/board-iconnect.c | 8 -
> arch/arm/mach-kirkwood/board-mplcec4.c | 1 -
> arch/arm/mach-kirkwood/board-nsa310.c | 25 -
> arch/arm/mach-kirkwood/board-readynas.c | 1 -
> arch/arm/mach-kirkwood/common.c | 47 +-
> arch/arm/mach-kirkwood/common.h | 8 +
> arch/arm/mach-kirkwood/db88f6281-bp-setup.c | 108 -
> arch/arm/mach-kirkwood/include/mach/bridge-regs.h | 2 +
> arch/arm/mach-kirkwood/pcie.c | 22 +
> arch/arm/mach-mvebu/Kconfig | 7 +-
> arch/arm/mach-mvebu/armada-370-xp.c | 53 +-
> arch/arm/mach-mvebu/armada-370-xp.h | 10 -
> arch/arm/mach-mvebu/coherency.c | 45 +-
> arch/arm/mach-mvebu/coherency.h | 4 -
> arch/arm/mach-mvebu/common.h | 2 +
> arch/arm/mach-mvebu/headsmp.S | 16 +-
> arch/arm/mach-mvebu/platsmp.c | 10 +-
> arch/arm/mach-omap2/Kconfig | 9 +
> arch/arm/mach-omap2/Makefile | 19 +-
> arch/arm/mach-omap2/am33xx.h | 1 +
> arch/arm/mach-omap2/board-generic.c | 16 +
> arch/arm/mach-omap2/cclock33xx_data.c | 30 +
> arch/arm/mach-omap2/cclock3xxx_data.c | 11 -
> arch/arm/mach-omap2/clockdomain.h | 1 +
> arch/arm/mach-omap2/clockdomains54xx_data.c | 464 +++
> arch/arm/mach-omap2/cm-regbits-54xx.h | 1737 +++++++++
> arch/arm/mach-omap2/cm1_44xx.h | 7 +-
> arch/arm/mach-omap2/cm1_54xx.h | 213 ++
> arch/arm/mach-omap2/cm2_44xx.h | 7 +-
> arch/arm/mach-omap2/cm2_54xx.h | 389 ++
> arch/arm/mach-omap2/cm33xx.h | 2 +-
> arch/arm/mach-omap2/cm_44xx_54xx.h | 36 +
> arch/arm/mach-omap2/common.h | 5 +-
> arch/arm/mach-omap2/control.h | 12 +
> arch/arm/mach-omap2/id.c | 32 +-
> arch/arm/mach-omap2/io.c | 25 +-
> arch/arm/mach-omap2/omap-headsmp.S | 8 +-
> arch/arm/mach-omap2/omap-mpuss-lowpower.c | 69 +-
> arch/arm/mach-omap2/omap-smp.c | 6 +-
> arch/arm/mach-omap2/omap4-common.c | 16 -
> arch/arm/mach-omap2/omap4-restart.c | 27 +
> arch/arm/mach-omap2/omap_hwmod.h | 1 +
> arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 3 +-
> arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 2150 +++++++++++
> arch/arm/mach-omap2/pm44xx.c | 58 +-
> arch/arm/mach-omap2/powerdomain.h | 1 +
> arch/arm/mach-omap2/powerdomains3xxx_data.c | 62 +
> arch/arm/mach-omap2/powerdomains54xx_data.c | 331 ++
> arch/arm/mach-omap2/prcm-common.h | 11 +
> arch/arm/mach-omap2/prcm44xx.h | 6 +
> arch/arm/mach-omap2/prcm_mpu44xx.h | 14 +-
> arch/arm/mach-omap2/prcm_mpu54xx.h | 87 +
> arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h | 36 +
> arch/arm/mach-omap2/prm-regbits-54xx.h | 2701 ++++++++++++++
> arch/arm/mach-omap2/prm44xx.h | 33 +-
> arch/arm/mach-omap2/prm44xx_54xx.h | 58 +
> arch/arm/mach-omap2/prm54xx.h | 421 +++
> arch/arm/mach-omap2/scrm54xx.h | 231 ++
> arch/arm/mach-omap2/soc.h | 26 +
> arch/arm/mach-omap2/sram.c | 3 +
> arch/arm/mach-omap2/timer.c | 2 +-
> arch/arm/mach-omap2/voltage.h | 1 +
> arch/arm/mach-omap2/voltagedomains54xx_data.c | 92 +
> arch/arm/mach-picoxcell/Kconfig | 1 -
> arch/arm/mach-picoxcell/common.c | 2 -
> arch/arm/mach-rockchip/Kconfig | 16 +
> arch/arm/mach-rockchip/Makefile | 1 +
> arch/arm/mach-rockchip/rockchip.c | 52 +
> arch/arm/mach-s3c24xx/dma-s3c2412.c | 56 +-
> arch/arm/mach-s3c24xx/dma-s3c2443.c | 3 +-
> arch/arm/mach-s3c24xx/dma.c | 3 -
> arch/arm/mach-shmobile/Kconfig | 65 +-
> arch/arm/mach-shmobile/Makefile | 2 -
> arch/arm/mach-shmobile/Makefile.boot | 18 +-
> arch/arm/mach-shmobile/board-ap4evb.c | 1332 -------
> arch/arm/mach-shmobile/board-armadillo800eva.c | 116 +-
> arch/arm/mach-shmobile/board-bockw.c | 21 +
> arch/arm/mach-shmobile/board-bonito.c | 495 ---
> arch/arm/mach-shmobile/board-kzm9g-reference.c | 1 -
> arch/arm/mach-shmobile/board-kzm9g.c | 11 +-
> arch/arm/mach-shmobile/board-lager.c | 15 +
> arch/arm/mach-shmobile/board-mackerel.c | 171 +-
> arch/arm/mach-shmobile/board-marzen.c | 188 +-
> arch/arm/mach-shmobile/clock-r8a73a4.c | 387 +-
> arch/arm/mach-shmobile/clock-r8a7740.c | 11 +-
> arch/arm/mach-shmobile/clock-r8a7778.c | 183 +-
> arch/arm/mach-shmobile/clock-r8a7779.c | 4 +-
> arch/arm/mach-shmobile/clock-r8a7790.c | 255 +-
> arch/arm/mach-shmobile/clock-sh73a0.c | 111 +-
> arch/arm/mach-shmobile/headsmp-scu.S | 29 +-
> arch/arm/mach-shmobile/headsmp.S | 13 +-
> arch/arm/mach-shmobile/include/mach/clock.h | 8 +-
> arch/arm/mach-shmobile/include/mach/common.h | 6 +-
> .../arm/mach-shmobile/include/mach/head-ap4evb.txt | 93 -
> arch/arm/mach-shmobile/include/mach/irqs.h | 5 +
> arch/arm/mach-shmobile/include/mach/memory.h | 7 -
> arch/arm/mach-shmobile/include/mach/mmc-ap4eb.h | 29 -
> arch/arm/mach-shmobile/include/mach/mmc.h | 4 +-
> arch/arm/mach-shmobile/include/mach/r8a7740.h | 488 ---
> arch/arm/mach-shmobile/include/mach/r8a7778.h | 11 +
> arch/arm/mach-shmobile/include/mach/r8a7779.h | 3 +
> arch/arm/mach-shmobile/include/mach/sh7372.h | 393 +-
> arch/arm/mach-shmobile/include/mach/zboot.h | 6 +-
> arch/arm/mach-shmobile/pm-sh7372.c | 3 +
> arch/arm/mach-shmobile/setup-r8a7740.c | 24 +-
> arch/arm/mach-shmobile/setup-r8a7778.c | 262 +-
> arch/arm/mach-shmobile/setup-r8a7779.c | 215 +-
> arch/arm/mach-shmobile/setup-r8a7790.c | 36 +-
> arch/arm/mach-shmobile/setup-sh73a0.c | 95 +-
> arch/arm/mach-shmobile/sleep-sh7372.S | 5 +-
> arch/arm/mach-shmobile/smp-emev2.c | 6 +-
> arch/arm/mach-shmobile/smp-r8a7779.c | 6 +-
> arch/arm/mach-shmobile/smp-sh73a0.c | 6 +-
> arch/arm/mach-socfpga/Kconfig | 2 +-
> arch/arm/mach-socfpga/socfpga.c | 2 -
> arch/arm/mach-sunxi/sunxi.c | 1 +
> arch/arm/mach-tegra/Makefile | 1 +
> arch/arm/mach-tegra/common.c | 2 +
> arch/arm/mach-tegra/common.h | 1 +
> arch/arm/mach-tegra/cpuidle-tegra20.c | 10 +-
> arch/arm/mach-tegra/cpuidle-tegra30.c | 10 +-
> arch/arm/mach-tegra/cpuidle.c | 19 +-
> arch/arm/mach-tegra/cpuidle.h | 15 +-
> arch/arm/mach-tegra/flowctrl.h | 1 +
> arch/arm/mach-tegra/fuse.h | 22 +-
> arch/arm/mach-tegra/hotplug.c | 13 +
> arch/arm/mach-tegra/platsmp.c | 26 +-
> arch/arm/mach-tegra/pm.c | 25 +-
> arch/arm/mach-tegra/pm.h | 4 +-
> arch/arm/mach-tegra/reset-handler.S | 51 +-
> arch/arm/mach-tegra/sleep-tegra30.S | 30 +-
> arch/arm/mach-tegra/sleep.S | 8 +-
> arch/arm/mach-tegra/sleep.h | 35 +-
> arch/arm/mach-tegra/tegra2_emc.c | 2 +-
> arch/arm/mach-u300/Kconfig | 32 +-
> arch/arm/mach-u300/Makefile | 2 -
> arch/arm/mach-u300/core.c | 759 ++--
> arch/arm/mach-u300/dummyspichip.c | 20 +-
> arch/arm/mach-u300/i2c.c | 285 --
> arch/arm/mach-u300/i2c.h | 23 -
> arch/arm/mach-u300/include/mach/hardware.h | 5 -
> arch/arm/mach-u300/include/mach/irqs.h | 80 -
> arch/arm/mach-u300/include/mach/syscon.h | 592 ---
> arch/arm/mach-u300/include/mach/timex.h | 17 -
> arch/arm/mach-u300/include/mach/u300-regs.h | 165 -
> arch/arm/mach-u300/include/mach/uncompress.h | 45 -
> arch/arm/mach-u300/regulator.c | 67 +-
> arch/arm/mach-u300/spi.c | 102 -
> arch/arm/mach-u300/spi.h | 26 -
> arch/arm/mach-u300/timer.c | 113 +-
> arch/arm/mach-u300/timer.h | 1 -
> arch/arm/mach-u300/u300-gpio.h | 70 -
> arch/arm/mach-vexpress/Kconfig | 9 +
> arch/arm/mach-vexpress/Makefile | 1 +
> arch/arm/mach-vexpress/core.h | 2 +
> arch/arm/mach-vexpress/dcscb.c | 253 ++
> arch/arm/mach-vexpress/dcscb_setup.S | 38 +
> arch/arm/mach-vexpress/platsmp.c | 20 +
> arch/arm/mach-vexpress/v2m.c | 1 +
> arch/arm/mach-virt/Makefile | 1 -
> arch/arm/mach-virt/platsmp.c | 50 -
> arch/arm/mach-virt/virt.c | 3 -
> arch/arm/mach-zynq/slcr.c | 2 +-
> arch/arm/mm/Kconfig | 21 +-
> arch/arm/mm/Makefile | 2 +
> arch/arm/mm/cache-nop.S | 50 +
> arch/arm/mm/nommu.c | 7 +
> arch/arm/mm/proc-v7m.S | 157 +
> arch/arm/plat-samsung/Kconfig | 47 +-
> arch/arm/plat-samsung/Makefile | 11 +-
> arch/arm/plat-samsung/include/plat/dma-s3c24xx.h | 5 -
> arch/arm/plat-samsung/include/plat/pm.h | 5 +
> arch/arm/plat-samsung/init.c | 8 +-
> arch/arm/plat-samsung/pm-gpio.c | 5 +-
> arch/arm/plat-samsung/pm.c | 8 +-
> arch/arm/plat-samsung/s5p-dev-mfc.c | 11 +-
> drivers/bus/Kconfig | 7 +
> drivers/bus/Makefile | 2 +
> drivers/bus/arm-cci.c | 533 +++
> drivers/clk/Makefile | 2 +-
> drivers/clk/clk-u300.c | 718 +++-
> drivers/clk/clk-zynq.c | 378 --
> drivers/clk/mvebu/Kconfig | 25 +-
> drivers/clk/mvebu/Makefile | 8 +-
> drivers/clk/mvebu/armada-370.c | 176 +
> drivers/clk/mvebu/armada-xp.c | 210 ++
> drivers/clk/mvebu/clk-core.c | 675 ----
> drivers/clk/mvebu/clk-core.h | 18 -
> drivers/clk/mvebu/clk-gating-ctrl.c | 250 --
> drivers/clk/mvebu/clk-gating-ctrl.h | 22 -
> drivers/clk/mvebu/clk.c | 23 -
> drivers/clk/mvebu/common.c | 163 +
> drivers/clk/mvebu/common.h | 48 +
> drivers/clk/mvebu/dove.c | 194 +
> drivers/clk/mvebu/kirkwood.c | 247 ++
> drivers/clk/socfpga/clk.c | 194 +-
> drivers/clk/tegra/clk-tegra114.c | 23 +-
> drivers/clk/zynq/Makefile | 3 +
> drivers/clk/zynq/clkc.c | 533 +++
> drivers/clk/zynq/pll.c | 235 ++
> drivers/clocksource/Kconfig | 2 +
> drivers/clocksource/cadence_ttc_timer.c | 23 +-
> drivers/clocksource/dw_apb_timer_of.c | 95 +-
> drivers/cpuidle/cpuidle-calxeda.c | 14 -
> drivers/dma/Kconfig | 2 +-
> drivers/dma/coh901318.c | 43 +
> drivers/dma/edma.c | 2 +-
> drivers/gpio/Kconfig | 12 +-
> drivers/gpio/Makefile | 2 +-
> drivers/gpio/gpio-clps711x.c | 236 +-
> drivers/gpio/gpio-rcar.c | 28 +-
> drivers/i2c/busses/i2c-stu300.c | 16 +-
> drivers/media/platform/Kconfig | 6 +-
> drivers/media/platform/exynos4-is/Kconfig | 3 +-
> drivers/media/platform/s5p-tv/Kconfig | 2 +-
> drivers/mfd/syscon.c | 3 +
> drivers/mmc/host/davinci_mmc.c | 1 +
> drivers/mtd/maps/Kconfig | 7 -
> drivers/mtd/maps/Makefile | 1 -
> drivers/mtd/maps/autcpu12-nvram.c | 129 -
> drivers/pci/Kconfig | 2 +
> drivers/pci/Makefile | 3 +
> drivers/pci/host/Kconfig | 17 +
> drivers/pci/host/Makefile | 2 +
> drivers/pci/host/pci-mvebu.c | 914 +++++
> drivers/pci/host/pcie-designware.c | 1057 ++++++
> drivers/pinctrl/Kconfig | 5 +-
> drivers/pinctrl/pinctrl-coh901.c | 35 +-
> drivers/pinctrl/pinctrl-u300.c | 7 +
> drivers/pinctrl/sh-pfc/Kconfig | 13 +-
> drivers/pinctrl/sh-pfc/Makefile | 2 +
> drivers/pinctrl/sh-pfc/core.c | 22 +-
> drivers/pinctrl/sh-pfc/core.h | 4 +
> drivers/pinctrl/sh-pfc/pfc-r8a7740.c | 1923 +++++++---
> drivers/pinctrl/sh-pfc/pfc-r8a7778.c | 2783 ++++++++++++++
> drivers/pinctrl/sh-pfc/pfc-r8a7779.c | 493 ++-
> drivers/pinctrl/sh-pfc/pfc-r8a7790.c | 3835 ++++++++++++++++++++
> drivers/pinctrl/sh-pfc/pfc-sh7372.c | 1652 ++++++---
> drivers/pinctrl/sh-pfc/pfc-sh73a0.c | 742 ++--
> drivers/pinctrl/sh-pfc/sh_pfc.h | 4 +-
> drivers/rtc/rtc-coh901331.c | 6 +
> drivers/spi/spi-pl022.c | 1 +
> drivers/thermal/exynos_thermal.c | 3 +-
> drivers/tty/serial/xilinx_uartps.c | 85 +-
> drivers/usb/Kconfig | 1 +
> drivers/usb/host/Kconfig | 2 +-
> drivers/usb/host/ehci-platform.c | 6 +
> drivers/usb/phy/Kconfig | 10 +-
> drivers/usb/phy/phy-rcar-usb.c | 128 +-
> drivers/watchdog/coh901327_wdt.c | 12 +-
> include/dt-bindings/clock/imx6sl-clock.h | 148 +
> include/dt-bindings/clock/vf610-clock.h | 163 +
> include/linux/arm-cci.h | 61 +
> include/linux/clk/mvebu.h | 22 -
> include/linux/clk/zynq.h | 8 +-
> include/linux/dw_apb_timer.h | 1 -
> include/linux/mfd/davinci_voicecodec.h | 3 +-
> include/linux/mfd/syscon/clps711x.h | 94 +
> .../mach => include/linux/platform_data}/edma.h | 94 +-
> include/linux/platform_data/gpio-rcar.h | 5 +-
> include/linux/platform_data/pinctrl-coh901.h | 22 -
> include/linux/platform_data/spi-davinci.h | 2 +-
> include/linux/platform_data/usb-rcar-phy.h | 28 +
> include/linux/usb/ehci_pdriver.h | 4 +
> sound/soc/davinci/davinci-evm.c | 1 +
> sound/soc/davinci/davinci-pcm.c | 1 +
> sound/soc/davinci/davinci-pcm.h | 2 +-
> 483 files changed, 34845 insertions(+), 19523 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/cci.txt
> create mode 100644 Documentation/devicetree/bindings/arm/keystone/keystone.txt
> create mode 100644 Documentation/devicetree/bindings/arm/rtsm-dcscb.txt
> create mode 100644 Documentation/devicetree/bindings/arm/ste-u300.txt
> create mode 100644 Documentation/devicetree/bindings/clock/imx6sl-clock.txt
> create mode 100644 Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt
> create mode 100644 Documentation/devicetree/bindings/clock/vf610-clock.txt
> create mode 100644 Documentation/devicetree/bindings/dma/ste-coh901318.txt
> create mode 100644 Documentation/devicetree/bindings/dma/ti-edma.txt
> create mode 100644 Documentation/devicetree/bindings/gpio/gpio-clps711x.txt
> create mode 100644 Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt
> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt
> create mode 100644 Documentation/devicetree/bindings/pci/designware-pcie.txt
> create mode 100644 Documentation/devicetree/bindings/pci/mvebu-pci.txt
> create mode 100644 Documentation/devicetree/bindings/pci/pci.txt
> create mode 100644 Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
> create mode 100644 Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt
> create mode 100644 Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt
> create mode 100644 arch/arm/boot/dts/keystone.dts
> create mode 100644 arch/arm/boot/dts/kirkwood-db-88f6281.dts
> create mode 100644 arch/arm/boot/dts/kirkwood-db-88f6282.dts
> create mode 100644 arch/arm/boot/dts/kirkwood-db.dtsi
> create mode 100644 arch/arm/boot/dts/rk3066a-clocks.dtsi
> create mode 100644 arch/arm/boot/dts/rk3066a.dtsi
> create mode 100644 arch/arm/boot/dts/ste-u300.dts
> rename arch/arm/{mach-davinci/dma.c => common/edma.c} (86%)
> delete mode 100644 arch/arm/configs/ap4evb_defconfig
> delete mode 100644 arch/arm/configs/bonito_defconfig
> create mode 100644 arch/arm/configs/keystone_defconfig
> delete mode 100644 arch/arm/include/asm/hardware/pci_v3.h
> create mode 100644 arch/arm/include/asm/v7m.h
> create mode 100644 arch/arm/include/debug/keystone.S
> create mode 100644 arch/arm/include/debug/rockchip.S
> rename arch/arm/{mach-u300/include/mach/debug-macro.S => include/debug/u300.S} (78%)
> create mode 100644 arch/arm/kernel/entry-v7m.S
> create mode 100644 arch/arm/kernel/psci_smp.c
> create mode 100644 arch/arm/mach-clps711x/devices.c
> create mode 100644 arch/arm/mach-clps711x/devices.h
> delete mode 100644 arch/arm/mach-clps711x/include/mach/autcpu12.h
> delete mode 100644 arch/arm/mach-clps711x/include/mach/memory.h
> delete mode 100644 arch/arm/mach-clps711x/include/mach/syspld.h
> delete mode 100644 arch/arm/mach-exynos/dev-ahci.c
> delete mode 100644 arch/arm/mach-exynos/dev-audio.c
> delete mode 100644 arch/arm/mach-exynos/dev-ohci.c
> delete mode 100644 arch/arm/mach-exynos/dev-uart.c
> delete mode 100644 arch/arm/mach-exynos/dma.c
> delete mode 100644 arch/arm/mach-exynos/include/mach/gpio.h
> delete mode 100644 arch/arm/mach-exynos/include/mach/irqs.h
> delete mode 100644 arch/arm/mach-exynos/include/mach/regs-gpio.h
> delete mode 100644 arch/arm/mach-exynos/include/mach/regs-usb-phy.h
> delete mode 100644 arch/arm/mach-exynos/mach-armlex4210.c
> delete mode 100644 arch/arm/mach-exynos/mach-nuri.c
> delete mode 100644 arch/arm/mach-exynos/mach-origen.c
> delete mode 100644 arch/arm/mach-exynos/mach-smdk4x12.c
> delete mode 100644 arch/arm/mach-exynos/mach-smdkv310.c
> delete mode 100644 arch/arm/mach-exynos/mach-universal_c210.c
> delete mode 100644 arch/arm/mach-exynos/setup-fimc.c
> delete mode 100644 arch/arm/mach-exynos/setup-fimd0.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c0.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c1.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c2.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c3.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c4.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c5.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c6.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c7.c
> delete mode 100644 arch/arm/mach-exynos/setup-keypad.c
> delete mode 100644 arch/arm/mach-exynos/setup-sdhci-gpio.c
> delete mode 100644 arch/arm/mach-exynos/setup-spi.c
> delete mode 100644 arch/arm/mach-exynos/setup-usb-phy.c
> create mode 100644 arch/arm/mach-imx/clk-imx6sl.c
> create mode 100644 arch/arm/mach-imx/clk-vf610.c
> create mode 100644 arch/arm/mach-imx/mach-imx6sl.c
> create mode 100644 arch/arm/mach-imx/mach-vf610.c
> delete mode 100644 arch/arm/mach-imx/ulpi.c
> delete mode 100644 arch/arm/mach-integrator/pci.c
> create mode 100644 arch/arm/mach-integrator/pci_v3.h
> create mode 100644 arch/arm/mach-keystone/Kconfig
> create mode 100644 arch/arm/mach-keystone/Makefile
> create mode 100644 arch/arm/mach-keystone/Makefile.boot
> create mode 100644 arch/arm/mach-keystone/keystone.c
> create mode 100644 arch/arm/mach-keystone/keystone.h
> create mode 100644 arch/arm/mach-keystone/platsmp.c
> create mode 100644 arch/arm/mach-keystone/smc.S
> create mode 100644 arch/arm/mach-kirkwood/board-db88f628x-bp.c
> delete mode 100644 arch/arm/mach-kirkwood/board-nsa310.c
> delete mode 100644 arch/arm/mach-kirkwood/db88f6281-bp-setup.c
> create mode 100644 arch/arm/mach-omap2/clockdomains54xx_data.c
> create mode 100644 arch/arm/mach-omap2/cm-regbits-54xx.h
> create mode 100644 arch/arm/mach-omap2/cm1_54xx.h
> create mode 100644 arch/arm/mach-omap2/cm2_54xx.h
> create mode 100644 arch/arm/mach-omap2/cm_44xx_54xx.h
> create mode 100644 arch/arm/mach-omap2/omap4-restart.c
> create mode 100644 arch/arm/mach-omap2/omap_hwmod_54xx_data.c
> create mode 100644 arch/arm/mach-omap2/powerdomains54xx_data.c
> create mode 100644 arch/arm/mach-omap2/prcm_mpu54xx.h
> create mode 100644 arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h
> create mode 100644 arch/arm/mach-omap2/prm-regbits-54xx.h
> create mode 100644 arch/arm/mach-omap2/prm44xx_54xx.h
> create mode 100644 arch/arm/mach-omap2/prm54xx.h
> create mode 100644 arch/arm/mach-omap2/scrm54xx.h
> create mode 100644 arch/arm/mach-omap2/voltagedomains54xx_data.c
> create mode 100644 arch/arm/mach-rockchip/Kconfig
> create mode 100644 arch/arm/mach-rockchip/Makefile
> create mode 100644 arch/arm/mach-rockchip/rockchip.c
> delete mode 100644 arch/arm/mach-shmobile/board-ap4evb.c
> delete mode 100644 arch/arm/mach-shmobile/board-bonito.c
> delete mode 100644 arch/arm/mach-shmobile/include/mach/head-ap4evb.txt
> delete mode 100644 arch/arm/mach-shmobile/include/mach/memory.h
> delete mode 100644 arch/arm/mach-shmobile/include/mach/mmc-ap4eb.h
> delete mode 100644 arch/arm/mach-u300/i2c.c
> delete mode 100644 arch/arm/mach-u300/i2c.h
> delete mode 100644 arch/arm/mach-u300/include/mach/hardware.h
> delete mode 100644 arch/arm/mach-u300/include/mach/irqs.h
> delete mode 100644 arch/arm/mach-u300/include/mach/syscon.h
> delete mode 100644 arch/arm/mach-u300/include/mach/timex.h
> delete mode 100644 arch/arm/mach-u300/include/mach/u300-regs.h
> delete mode 100644 arch/arm/mach-u300/include/mach/uncompress.h
> delete mode 100644 arch/arm/mach-u300/spi.c
> delete mode 100644 arch/arm/mach-u300/spi.h
> delete mode 100644 arch/arm/mach-u300/timer.h
> delete mode 100644 arch/arm/mach-u300/u300-gpio.h
> create mode 100644 arch/arm/mach-vexpress/dcscb.c
> create mode 100644 arch/arm/mach-vexpress/dcscb_setup.S
> delete mode 100644 arch/arm/mach-virt/platsmp.c
> create mode 100644 arch/arm/mm/cache-nop.S
> create mode 100644 arch/arm/mm/proc-v7m.S
> create mode 100644 drivers/bus/arm-cci.c
> delete mode 100644 drivers/clk/clk-zynq.c
> create mode 100644 drivers/clk/mvebu/armada-370.c
> create mode 100644 drivers/clk/mvebu/armada-xp.c
> delete mode 100644 drivers/clk/mvebu/clk-core.c
> delete mode 100644 drivers/clk/mvebu/clk-core.h
> delete mode 100644 drivers/clk/mvebu/clk-gating-ctrl.c
> delete mode 100644 drivers/clk/mvebu/clk-gating-ctrl.h
> delete mode 100644 drivers/clk/mvebu/clk.c
> create mode 100644 drivers/clk/mvebu/common.c
> create mode 100644 drivers/clk/mvebu/common.h
> create mode 100644 drivers/clk/mvebu/dove.c
> create mode 100644 drivers/clk/mvebu/kirkwood.c
> create mode 100644 drivers/clk/zynq/Makefile
> create mode 100644 drivers/clk/zynq/clkc.c
> create mode 100644 drivers/clk/zynq/pll.c
> delete mode 100644 drivers/mtd/maps/autcpu12-nvram.c
> create mode 100644 drivers/pci/host/Kconfig
> create mode 100644 drivers/pci/host/Makefile
> create mode 100644 drivers/pci/host/pci-mvebu.c
> create mode 100644 drivers/pci/host/pcie-designware.c
> create mode 100644 drivers/pinctrl/sh-pfc/pfc-r8a7778.c
> create mode 100644 drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> create mode 100644 include/dt-bindings/clock/imx6sl-clock.h
> create mode 100644 include/dt-bindings/clock/vf610-clock.h
> create mode 100644 include/linux/arm-cci.h
> delete mode 100644 include/linux/clk/mvebu.h
> create mode 100644 include/linux/mfd/syscon/clps711x.h
> rename {arch/arm/mach-davinci/include/mach => include/linux/platform_data}/edma.h (58%)
> delete mode 100644 include/linux/platform_data/pinctrl-coh901.h
> create mode 100644 include/linux/platform_data/usb-rcar-phy.h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists