| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20130703031426.GA21116@mtj.dyndns.org>
Date: Tue, 2 Jul 2013 20:14:26 -0700
From: Tejun Heo <tj@...nel.org>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, linux-ide@...r.kernel.org
Subject: [GIT PULL] libata changes for v3.11-rc1
Hello, Linus.
Nothing too interesting; however, the top commit is merging
for-3.10-fixes into for-3.11. The severity of patches which were
collecting for-3.10-fixes didn't seem to justify new -fixes pull
request, but, in retrospect, I think I sat on them for too long and
will probably push out quicker from now on. The merge creates three
conflicts in sata_rcar.c but all are trivial and the resoultions are
identical to what have been published through for-next for quite some
time.
Overview of changes:
* The rest of maintainer email address updates.
* Some core updates - more robust default behavior for port
multipliers, better error reporting for SG_IO commands, and a way to
better work around now ancient and probably pretty rare PATA -> SATA
bridges with ATAPI devices.
* sata_rcar stabilization.
* Some hardware PCI ID additions and one-off low level driver updates.
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git for-3.11
for you to fetch changes up to 5a0a6a4f17a3606289f96356383db695a555bdbd:
Merge branch 'libata/for-3.10-fixes' into libata/for-3.11 (2013-07-02 19:54:16 -0700)
----------------------------------------------------------------
Alexander Gordeev (1):
AHCI: Make distinct names for ports in /proc/interrupts
David Milburn (1):
libata: export ata_port port_no attribute via /sys
Girish K S (1):
ahci: sata: add support for exynos5440 sata
Gwendal Grignou (1):
libata: cleanup SAT error translation
Jingoo Han (2):
ata: use platform_{get,set}_drvdata()
ata: use pci_get_drvdata()
Mark Langsdorf (3):
sata_highbank: increase retry count but shorten duration for Calxeda controller
ahci: make ahci_transmit_led_message into a function pointer
sata highbank: add bit-banged SGPIO driver support
Sergei Shtylyov (7):
sata_rcar: kill superfluous code in sata_rcar_bmdma_fill_sg()
sata_rcar: correct 'sata_rcar_sht'
sata_rcar: add 'base' local variable to some functions
ipr: qc_fill_rtf() method should not store alternate status register
sata_rcar: fix compilation warning in sata_rcar_thaw()
libata-zpodd: must use ata_tf_init()
AHCI: use ATA_BUSY
Seth Heasley (2):
ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs
ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDs
Shane Huang (1):
ahci: remove pmp link online check in FBS EH
Simon Horman (1):
libata: do not limit R-Car SATA driver to shmobile
Tejun Heo (2):
libata: skip SRST for all SIMG [34]7x port-multipliers
Merge branch 'libata/for-3.10-fixes' into libata/for-3.11
Vincent Pelletier (1):
libata: Add atapi_dmadir force flag
.../devicetree/bindings/ata/ahci-platform.txt | 5 +
Documentation/kernel-parameters.txt | 2 +
arch/arm/boot/dts/ecx-common.dtsi | 2 +
drivers/ata/Kconfig | 1 -
drivers/ata/acard-ahci.c | 4 +-
drivers/ata/ahci.c | 11 +-
drivers/ata/ahci.h | 2 +
drivers/ata/ahci_platform.c | 1 +
drivers/ata/ata_piix.c | 8 +-
drivers/ata/libahci.c | 26 ++-
drivers/ata/libata-core.c | 9 +-
drivers/ata/libata-pmp.c | 33 ++--
drivers/ata/libata-scsi.c | 37 ++---
drivers/ata/libata-transport.c | 4 +-
drivers/ata/libata-zpodd.c | 7 +-
drivers/ata/pata_ali.c | 2 +-
drivers/ata/pata_amd.c | 2 +-
drivers/ata/pata_arasan_cf.c | 2 +-
drivers/ata/pata_artop.c | 2 +-
drivers/ata/pata_at91.c | 2 +-
drivers/ata/pata_atp867x.c | 2 +-
drivers/ata/pata_bf54x.c | 10 +-
drivers/ata/pata_cmd640.c | 2 +-
drivers/ata/pata_cmd64x.c | 2 +-
drivers/ata/pata_cs5520.c | 4 +-
drivers/ata/pata_cs5530.c | 2 +-
drivers/ata/pata_hpt366.c | 2 +-
drivers/ata/pata_hpt3x3.c | 2 +-
drivers/ata/pata_imx.c | 2 +-
drivers/ata/pata_it821x.c | 2 +-
drivers/ata/pata_macio.c | 6 +-
drivers/ata/pata_mpc52xx.c | 4 +-
drivers/ata/pata_ninja32.c | 2 +-
drivers/ata/pata_ns87415.c | 2 +-
drivers/ata/pata_pdc2027x.c | 2 +-
drivers/ata/pata_pxa.c | 2 +-
drivers/ata/pata_rdc.c | 2 +-
drivers/ata/pata_rz1000.c | 2 +-
drivers/ata/pata_serverworks.c | 2 +-
drivers/ata/pata_sil680.c | 2 +-
drivers/ata/pata_sis.c | 2 +-
drivers/ata/pata_sl82c105.c | 2 +-
drivers/ata/pata_triflex.c | 2 +-
drivers/ata/pata_via.c | 2 +-
drivers/ata/sata_fsl.c | 14 +-
drivers/ata/sata_highbank.c | 181 ++++++++++++++++++++-
drivers/ata/sata_inic162x.c | 2 +-
drivers/ata/sata_nv.c | 2 +-
drivers/ata/sata_rcar.c | 138 ++++++++--------
drivers/ata/sata_sil.c | 2 +-
drivers/ata/sata_sil24.c | 2 +-
drivers/scsi/ipr.c | 1 -
include/linux/libata.h | 5 +
53 files changed, 388 insertions(+), 185 deletions(-)
Thanks.
--
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists