linux-kernel - Re: [lm-sensors] [PATCH 1/2] ARM: dt: t30 cardhu: add dt entry for lm90

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20130708095024.041a6d57@endymion.delvare>
Date:	Mon, 8 Jul 2013 09:50:24 +0200
From:	Jean Delvare <khali@...ux-fr.org>
To:	Wei Ni <wni@...dia.com>
Cc:	Stephen Warren <swarren@...dotorg.org>, linux@....linux.org.uk,
	linux-kernel@...r.kernel.org, lm-sensors@...sensors.org,
	Matthew Longnecker <MLongnecker@...dia.com>,
	Alex Courbot <acourbot@...dia.com>,
	linux-tegra@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [lm-sensors] [PATCH 1/2] ARM: dt: t30 cardhu: add dt entry for
  lm90

On Mon, 8 Jul 2013 15:35:48 +0800, Wei Ni wrote:
> On 07/06/2013 01:38 AM, Stephen Warren wrote:
> > On 07/04/2013 03:09 AM, Wei Ni wrote:
> >> Enable thermal sensor lm90 for t30 cardhu.
> > 
> >> diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
> > 
> >> +		nct1008: nct1008 {
> >> +			compatible = "lm90,nct1008";
> > 
> > "lm90" isn't a valid vendor prefix. I believe the value you want is
> > "onnn,nct1008". Same comment for patch 2/2.
> 
> The lm90 doesn't support device tree very well.

I doubt it, but if this is the case, then please fix it, instead of
working the problem around in a different place.

> In the DT, we need to
> named as "lm90" so that the lm90 driver can be loaded,

Not that I am an expert with regards to DT, but this doesn't make any
sense to me. AFAIK DT is about devices, not which drivers handle them.

> and we also need
> to add "nct1008" to indicate this is the nct1008 device, so that the
> lm90 driver can be loaded with the right i2c_device_id->driver_data.
> 
> I set the " compatible = "lm90,nct1008" ", this is the simplest way, and
> we doesn't need to change the lm90.c.

There's no problem with changing the lm90 driver, if this is the right
thing to do.

-- 
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/