linux-kernel - Re: [lm-sensors] 3.10: NCT6776F sensor question with Supermicro X9SRL-F motherboard

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CAO9zADyZvMpJoD68QKQ9bw0dMLdMvwK3Yqz=E5zTWWoFCoqncg@mail.gmail.com>
Date:	Thu, 11 Jul 2013 09:57:12 -0400
From:	Justin Piszcz <jpiszcz@...idpixels.com>
To:	Jean Delvare <khali@...ux-fr.org>
Cc:	Guenter Roeck <linux@...ck-us.net>,
	open list <linux-kernel@...r.kernel.org>,
	lm-sensors@...sensors.org
Subject: Re: [lm-sensors] 3.10: NCT6776F sensor question with Supermicro
 X9SRL-F motherboard

Thanks for these details!

On Thu, Jul 11, 2013 at 4:47 AM, Jean Delvare <khali@...ux-fr.org> wrote:
> Hi Guenter, Justin,
>
> On Wed, 3 Jul 2013 07:42:01 -0700, Guenter Roeck wrote:
>> On Wed, Jul 03, 2013 at 08:35:59AM -0400, Justin Piszcz wrote:
>> > I also found:
>> > http://www.lm-sensors.org/wiki/Configurations/SuperMicro/X9SRA
>> >
>> > Does Super Micro also have such a config file for the X9SRL-F?
>> > This board uses a NCT6776F.
>>
>> Supermicro does not provide configuration files. You can take the above file,
>> test and update it, and let us know so we can add it to the wiki.
>
> Actually they do provide configuration information. They have their own
> tool names SuperDoctor, which can be downloaded from:
>   ftp://ftp.supermicro.com/utility/SuperDoctor_II/Linux/Release/
>
> If you look at file AllSuperD.ini, you'll find per-board entries
> describing the input mapping. It is very helpful when writing a custom
> libsensors configuration file for the board in question. It takes some
> knowledge of the monitoring chip or its driver though, as the ini file
> references register addresses ("Offset" in the file.)
>
> A gave a quick look and at least the voltage input mapping (and
> presumably the voltage scaling factors as well) is similar to the
> X9SRA so you can reuse this part of the X9SRA configuration file.
>
> Hope that helps,
> --
> Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/