| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1373636638-18496-3-git-send-email-g.liakhovetski@gmx.de>
Date: Fri, 12 Jul 2013 15:43:52 +0200
From: Guennadi Liakhovetski <g.liakhovetski@....de>
To: linux-kernel@...r.kernel.org
Cc: linux-sh@...r.kernel.org, Magnus Damm <magnus.damm@...il.com>,
Simon Horman <horms@...ge.net.au>,
Vinod Koul <vinod.koul@...el.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Guennadi Liakhovetski <g.liakhovetski+renesas@...il.com>
Subject: [PATCH 2/8] DMA: shdma: add r8a7740 DMAC data to the device ID table
This configuration data will be re-used, when DMAC DT support is added to
r8a7740, DMAC platform data in setup-r8a7740.c will be removed.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@...il.com>
---
drivers/dma/sh/Kconfig | 4 ++
drivers/dma/sh/Makefile | 1 +
drivers/dma/sh/shdma-r8a7740.c | 95 ++++++++++++++++++++++++++++++++++++++++
drivers/dma/sh/shdma.h | 7 +++
drivers/dma/sh/shdmac.c | 1 +
5 files changed, 108 insertions(+), 0 deletions(-)
create mode 100644 drivers/dma/sh/shdma-r8a7740.c
diff --git a/drivers/dma/sh/Kconfig b/drivers/dma/sh/Kconfig
index 5c1dee2..0ac3e94 100644
--- a/drivers/dma/sh/Kconfig
+++ b/drivers/dma/sh/Kconfig
@@ -22,3 +22,7 @@ config SUDMAC
depends on SH_DMAE_BASE
help
Enable support for the Renesas SUDMAC controllers.
+
+config SHDMA_R8A7740
+ def_bool y
+ depends on ARCH_R8A7740 && SH_DMAE != n
diff --git a/drivers/dma/sh/Makefile b/drivers/dma/sh/Makefile
index 893ee09..acdd3cb 100644
--- a/drivers/dma/sh/Makefile
+++ b/drivers/dma/sh/Makefile
@@ -1,5 +1,6 @@
obj-$(CONFIG_SH_DMAE_BASE) += shdma-base.o shdma-of.o
obj-$(CONFIG_SH_DMAE) += shdma.o
shdma-y := shdmac.o
+shdma-$(CONFIG_SHDMA_R8A7740) += shdma-r8a7740.o
shdma-objs := $(shdma-y)
obj-$(CONFIG_SUDMAC) += sudmac.o
diff --git a/drivers/dma/sh/shdma-r8a7740.c b/drivers/dma/sh/shdma-r8a7740.c
new file mode 100644
index 0000000..2597e2c
--- /dev/null
+++ b/drivers/dma/sh/shdma-r8a7740.c
@@ -0,0 +1,95 @@
+#include <linux/sh_dma.h>
+
+#include <mach/dma-register.h>
+#include <mach/r8a7740.h>
+
+static const struct sh_dmae_slave_config r8a7740_dmae_slaves[] = {
+ {
+ .slave_id = SHDMA_SLAVE_SDHI0_TX,
+ .addr = 0xe6850030,
+ .chcr = CHCR_TX(XMIT_SZ_16BIT),
+ .mid_rid = 0xc1,
+ }, {
+ .slave_id = SHDMA_SLAVE_SDHI0_RX,
+ .addr = 0xe6850030,
+ .chcr = CHCR_RX(XMIT_SZ_16BIT),
+ .mid_rid = 0xc2,
+ }, {
+ .slave_id = SHDMA_SLAVE_SDHI1_TX,
+ .addr = 0xe6860030,
+ .chcr = CHCR_TX(XMIT_SZ_16BIT),
+ .mid_rid = 0xc9,
+ }, {
+ .slave_id = SHDMA_SLAVE_SDHI1_RX,
+ .addr = 0xe6860030,
+ .chcr = CHCR_RX(XMIT_SZ_16BIT),
+ .mid_rid = 0xca,
+ }, {
+ .slave_id = SHDMA_SLAVE_SDHI2_TX,
+ .addr = 0xe6870030,
+ .chcr = CHCR_TX(XMIT_SZ_16BIT),
+ .mid_rid = 0xcd,
+ }, {
+ .slave_id = SHDMA_SLAVE_SDHI2_RX,
+ .addr = 0xe6870030,
+ .chcr = CHCR_RX(XMIT_SZ_16BIT),
+ .mid_rid = 0xce,
+ }, {
+ .slave_id = SHDMA_SLAVE_FSIA_TX,
+ .addr = 0xfe1f0024,
+ .chcr = CHCR_TX(XMIT_SZ_32BIT),
+ .mid_rid = 0xb1,
+ }, {
+ .slave_id = SHDMA_SLAVE_FSIA_RX,
+ .addr = 0xfe1f0020,
+ .chcr = CHCR_RX(XMIT_SZ_32BIT),
+ .mid_rid = 0xb2,
+ }, {
+ .slave_id = SHDMA_SLAVE_FSIB_TX,
+ .addr = 0xfe1f0064,
+ .chcr = CHCR_TX(XMIT_SZ_32BIT),
+ .mid_rid = 0xb5,
+ }, {
+ .slave_id = SHDMA_SLAVE_MMCIF_TX,
+ .addr = 0xe6bd0034,
+ .chcr = CHCR_TX(XMIT_SZ_32BIT),
+ .mid_rid = 0xd1,
+ }, {
+ .slave_id = SHDMA_SLAVE_MMCIF_RX,
+ .addr = 0xe6bd0034,
+ .chcr = CHCR_RX(XMIT_SZ_32BIT),
+ .mid_rid = 0xd2,
+ },
+};
+
+#define DMA_CHANNEL(a, b, c) \
+{ \
+ .offset = a, \
+ .dmars = b, \
+ .dmars_bit = c, \
+ .chclr_offset = (0x220 - 0x20) + a \
+}
+
+static const struct sh_dmae_channel r8a7740_dmae_channels[] = {
+ DMA_CHANNEL(0x00, 0, 0),
+ DMA_CHANNEL(0x10, 0, 8),
+ DMA_CHANNEL(0x20, 4, 0),
+ DMA_CHANNEL(0x30, 4, 8),
+ DMA_CHANNEL(0x50, 8, 0),
+ DMA_CHANNEL(0x60, 8, 8),
+};
+
+struct sh_dmae_pdata r8a7740_dma_pdata = {
+ .slave = r8a7740_dmae_slaves,
+ .slave_num = ARRAY_SIZE(r8a7740_dmae_slaves),
+ .channel = r8a7740_dmae_channels,
+ .channel_num = ARRAY_SIZE(r8a7740_dmae_channels),
+ .ts_low_shift = TS_LOW_SHIFT,
+ .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT,
+ .ts_high_shift = TS_HI_SHIFT,
+ .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT,
+ .ts_shift = dma_ts_shift,
+ .ts_shift_num = ARRAY_SIZE(dma_ts_shift),
+ .dmaor_init = DMAOR_DME,
+ .chclr_present = 1,
+};
diff --git a/drivers/dma/sh/shdma.h b/drivers/dma/sh/shdma.h
index 06aae6e..b5fe545 100644
--- a/drivers/dma/sh/shdma.h
+++ b/drivers/dma/sh/shdma.h
@@ -61,4 +61,11 @@ struct sh_dmae_desc {
#define to_sh_dev(chan) container_of(chan->shdma_chan.dma_chan.device,\
struct sh_dmae_device, shdma_dev.dma_dev)
+#ifdef CONFIG_SHDMA_R8A7740
+extern struct sh_dmae_pdata r8a7740_dma_pdata;
+#define r8a7740_shdma_devid &r8a7740_dma_pdata
+#else
+#define r8a7740_shdma_devid NULL
+#endif
+
#endif /* __DMA_SHDMA_H */
diff --git a/drivers/dma/sh/shdmac.c b/drivers/dma/sh/shdmac.c
index 3c5634e..9e724ae 100644
--- a/drivers/dma/sh/shdmac.c
+++ b/drivers/dma/sh/shdmac.c
@@ -923,6 +923,7 @@ MODULE_DEVICE_TABLE(of, sh_dmae_of_match);
const struct platform_device_id sh_dmae_id_table[] = {
{.name = SH_DMAE_DRV_NAME,},
+ {.name = "shdma-r8a7740", .driver_data = (kernel_ulong_t)r8a7740_shdma_devid,},
{}
};
MODULE_DEVICE_TABLE(platform, sh_dmae_id_table);
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists