| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAErSpo4c6xPh1otnU+-oTBGim0+K4X8RxvrPWdz7ViWqhq8e_g@mail.gmail.com>
Date: Thu, 11 Jul 2013 21:37:58 -0600
From: Bjorn Helgaas <bhelgaas@...gle.com>
To: Don Dutile <ddutile@...hat.com>
Cc: Yijing Wang <wangyijing@...wei.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
Rafael <rjw@...k.pl>, Hanjun Guo <guohanjun@...wei.com>,
Jiang Liu <jiang.liu@...wei.com>
Subject: Re: [PATCH -v2 1/3] PCI: introduce PCIe Device Serial Number
Capability support
On Thu, Jul 11, 2013 at 12:18 PM, Don Dutile <ddutile@...hat.com> wrote:
> On 07/11/2013 04:09 PM, Bjorn Helgaas wrote:
>>
>> On Thu, Jul 11, 2013 at 3:51 AM, Don Dutile<ddutile@...hat.com> wrote:
>>>
>>> On 07/11/2013 05:43 AM, Yijing Wang wrote:
>>>>
>>>>
>>>> Introduce PCIe Ext Capability Device Serial Number support,
>>>> so we can use the unique device serial number to identify
>>>> the physical device. During system suspend, if the PCIe
>>>> device was removed and inserted a new same device, after
>>>> system resume there is no good way to identify it, maybe
>>>> Device Serial Number is a good choice if device support.
>>>>
>>>> Signed-off-by: Yijing Wang<wangyijing@...wei.com>
>>>> ---
>>>> drivers/pci/pci.c | 27 +++++++++++++++++++++++++++
>>>> drivers/pci/probe.c | 2 ++
>>>> include/linux/pci.h | 3 +++
>>>> 3 files changed, 32 insertions(+), 0 deletions(-)
>>>>
>>>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>>>> index e37fea6..2e855b5 100644
>>>> --- a/drivers/pci/pci.c
>>>> +++ b/drivers/pci/pci.c
>>>> @@ -2048,6 +2048,33 @@ void pci_free_cap_save_buffers(struct pci_dev
>>>> *dev)
>>>> }
>>>>
>>>> /**
>>>> + * pci_device_serial_number - get device serial number
>>>> + * @dev: the PCI device
>>>> + *
>>>> + * return the device serial number if device support,
>>>> + * otherwise return 0.
>>>> + */
>>>> +u64 pci_device_serial_number(struct pci_dev *dev)
>>>
>>>
>>> See comment below:
>>> void pci_device_serial_number(struct pci_dev *dev)
>>>
>>>
>>>> +{
>>>> + int pos;
>>>> + u64 sn;
>>>> + u32 lo, hi;
>>>> +
>>>> + if (!pci_is_pcie(dev))
>>>> + return 0;
>>>> +
>>>
>>>
>>> See comment below:
>>> if (!pci_is_pcie(dev)) {
>>> dev->sn = 0;
>>> return;
>>>
>>> }
>>>>
>>>>
>>>> + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DSN);
>>>> + if (!pos)
>>>> + return 0;
>>>> +
>>>> + pci_read_config_dword(dev, pos + 4,&lo);
>>>> + pci_read_config_dword(dev, pos + 8,&hi);
>>>> + sn = ((u64)hi<< 32) | lo;
>>>
>>>
>>> See comment below:
>>> dev->sn = ((u64)hi<< 32) | lo;
>>> return;
>>>
>>>> + return sn;
>>>> +}
>>>> +EXPORT_SYMBOL(pci_device_serial_number);
>>>> +
>>>> +/**
>>>> * pci_configure_ari - enable or disable ARI forwarding
>>>> * @dev: the PCI device
>>>> *
>>>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>>>> index 46ada5c..c4c1a2b 100644
>>>> --- a/drivers/pci/probe.c
>>>> +++ b/drivers/pci/probe.c
>>>> @@ -1322,6 +1322,8 @@ static void pci_init_capabilities(struct pci_dev
>>>> *dev)
>>>> /* Power Management */
>>>> pci_pm_init(dev);
>>>>
>>>> + dev->sn = pci_device_serial_number(dev);
>>>> +
>>>
>>>
>>> Finally, 'the comment below':
>>> I know you were following Bjorn's suggestion, which I thought
>>> was an improvement, but why not do above assignment in
>>> pci_device_serial_number() ?
>>> See above....
>>
>>
>> pci_device_serial_number() would then have the side-effect of saving
>> the result somewhere, and callers would have to know where to look.
>
> Ah, like so many other features of a PCI device? -- what are all those
> flags/status bits in pdev for ??? ;-)
>
>
>> Personally, I think it's simpler to return the serial number directly
>> and avoid the side-effect, but maybe this is just bike-shedding.
>>
> What struck me about rtning a value is in pci_init_capabilities(),
> it was the only function with a rtn value that had to be put into a pci_dev
> struct element,
> while all the others stored their related capabilities in the pdev, or other
> struct
> related to it.
Good point, BTW. I hadn't thought about it from that angle.
> So, maybe there should be a "pci_device_serial_number_init()" function
> which does the storage in the pdev struct, and another (wrapper,
> dare I shoot myself, inline) that is "pci_device_serial_number()" that
> returns
> the value of the pdev's sn element, if another module or other core
> component
> want to get it. .... and do that in a future patch... :-/
Of course, for Yijing's use, it's important that we're able to get the
*non-cached* serial number, because the cached one belongs to the old,
pre-suspend device, and we want to look at the post-suspend device to
see if it's the same.
Sigh. I dunno, I'll have to finish sorting through this in a week or
so... (I'll be on vacation for the next few days.)
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists