linux-kernel - [PATCH v2 26/42] USB: ohci-at91: add usb_clk for transition to common clk framework

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1374076062-20293-1-git-send-email-b.brezillon@overkiz.com>
Date:	Wed, 17 Jul 2013 17:47:42 +0200
From:	Boris BREZILLON <b.brezillon@...rkiz.com>
To:	Nicolas Ferre <nicolas.ferre@...el.com>,
	Ludovic Desroches <ludovic.desroches@...el.com>,
	Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
	Mike Turquette <mturquette@...aro.org>,
	Alan Stern <stern@...land.harvard.edu>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	linux-usb@...r.kernel.org,
	Boris BREZILLON <b.brezillon@...rkiz.com>
Subject: [PATCH v2 26/42] USB: ohci-at91: add usb_clk for transition to common clk framework

The AT91 PMC (Power Management Controller) provides an USB clock used by
USB Full Speed host (ohci) and USB Full Speed device (udc).
The usb drivers (ohci and udc) must configure this clock to 48Mhz.
This configuration was formely done in mach-at91/clock.c, but this
implementation will be removed when moving to common clk framework.

This patch add support for usb clock retrieval and configuration.

Signed-off-by: Boris BREZILLON <b.brezillon@...rkiz.com>
---
 drivers/usb/host/ohci-at91.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 9677f68..ca1cdd6 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -31,8 +31,8 @@
 #define at91_for_each_port(index)	\
 		for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++)
 
-/* interface and function clocks; sometimes also an AHB clock */
-static struct clk *iclk, *fclk, *hclk;
+/* interface, function and usb clocks; sometimes also an AHB clock */
+static struct clk *iclk, *fclk, *uclk, *hclk;
 static int clocked;
 
 extern int usb_disabled(void);
@@ -41,6 +41,8 @@ extern int usb_disabled(void);
 
 static void at91_start_clock(void)
 {
+	clk_set_rate(uclk, 48000000);
+	clk_prepare_enable(uclk);
 	clk_prepare_enable(hclk);
 	clk_prepare_enable(iclk);
 	clk_prepare_enable(fclk);
@@ -52,6 +54,7 @@ static void at91_stop_clock(void)
 	clk_disable_unprepare(fclk);
 	clk_disable_unprepare(iclk);
 	clk_disable_unprepare(hclk);
+	clk_disable_unprepare(uclk);
 	clocked = 0;
 }
 
@@ -162,6 +165,12 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 		retval = PTR_ERR(hclk);
 		goto err5;
 	}
+	uclk = clk_get(&pdev->dev, "usb_clk");
+	if (IS_ERR(uclk)) {
+		dev_err(&pdev->dev, "failed to get usb_clk\n");
+		retval = PTR_ERR(uclk);
+		goto err6;
+	}
 
 	at91_start_hc(pdev);
 	ohci_hcd_init(hcd_to_ohci(hcd));
@@ -173,6 +182,8 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 	/* Error handling */
 	at91_stop_hc(pdev);
 
+	clk_put(uclk);
+ err6:
 	clk_put(hclk);
  err5:
 	clk_put(fclk);
@@ -212,6 +223,7 @@ static void usb_hcd_at91_remove(struct usb_hcd *hcd,
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
 
+	clk_put(uclk);
 	clk_put(hclk);
 	clk_put(fclk);
 	clk_put(iclk);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/