| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1374129984-765-7-git-send-email-kishon@ti.com>
Date: Thu, 18 Jul 2013 12:16:15 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: <gregkh@...uxfoundation.org>, <kyungmin.park@...sung.com>,
<balbi@...com>, <kishon@...com>, <jg1.han@...sung.com>,
<s.nawrocki@...sung.com>, <kgene.kim@...sung.com>
CC: <grant.likely@...aro.org>, <tony@...mide.com>, <arnd@...db.de>,
<swarren@...dia.com>, <devicetree-discuss@...ts.ozlabs.org>,
<linux-doc@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-samsung-soc@...r.kernel.org>, <linux-omap@...r.kernel.org>,
<linux-usb@...r.kernel.org>, <linux-media@...r.kernel.org>,
<linux-fbdev@...r.kernel.org>, <akpm@...ux-foundation.org>,
<balajitk@...com>, <george.cherian@...com>, <nsekhar@...com>
Subject: [PATCH 06/15] usb: musb: omap2430: use the new generic PHY framework
Use the generic PHY framework API to get the PHY. The usb_phy_set_resume
and usb_phy_set_suspend is replaced with power_on and
power_off to align with the new PHY framework.
musb->xceiv can't be removed as of now because musb core uses xceiv.state and
xceiv.otg. Once there is a separate state machine to handle otg, these can be
moved out of xceiv and then we can start using the generic PHY framework.
Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@...sung.com>
Acked-by: Felipe Balbi <balbi@...com>
---
drivers/usb/musb/Kconfig | 1 +
drivers/usb/musb/musb_core.c | 1 +
drivers/usb/musb/musb_core.h | 3 +++
drivers/usb/musb/omap2430.c | 26 ++++++++++++++++++++------
4 files changed, 25 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 797e3fd..01381ac 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -76,6 +76,7 @@ config USB_MUSB_TUSB6010
config USB_MUSB_OMAP2PLUS
tristate "OMAP2430 and onwards"
depends on ARCH_OMAP2PLUS
+ depends on GENERIC_PHY
config USB_MUSB_AM35X
tristate "AM35x"
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 29a24ce..cca12c0 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1814,6 +1814,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
musb->min_power = plat->min_power;
musb->ops = plat->platform_ops;
musb->port_mode = plat->mode;
+ musb->phy_label = plat->phy_label;
/* The musb_platform_init() call:
* - adjusts musb->mregs
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 7d341c3..8f017ab 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -46,6 +46,7 @@
#include <linux/usb.h>
#include <linux/usb/otg.h>
#include <linux/usb/musb.h>
+#include <linux/phy/phy.h>
struct musb;
struct musb_hw_ep;
@@ -346,6 +347,7 @@ struct musb {
u16 int_tx;
struct usb_phy *xceiv;
+ struct phy *phy;
int nIrq;
unsigned irq_wake:1;
@@ -424,6 +426,7 @@ struct musb {
unsigned double_buffer_not_ok:1;
struct musb_hdrc_config *config;
+ const char *phy_label;
#ifdef MUSB_CONFIG_PROC_FS
struct proc_dir_entry *proc_entry;
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 6708a3b..87dac0f 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -348,11 +348,21 @@ static int omap2430_musb_init(struct musb *musb)
* up through ULPI. TWL4030-family PMICs include one,
* which needs a driver, drivers aren't always needed.
*/
- if (dev->parent->of_node)
+ if (dev->parent->of_node) {
+ musb->phy = devm_phy_get(dev->parent, "usb2-phy");
+
+ /* We can't totally remove musb->xceiv as of now because
+ * musb core uses xceiv.state and xceiv.otg. Once we have
+ * a separate state machine to handle otg, these can be moved
+ * out of xceiv and then we can start using the generic PHY
+ * framework
+ */
musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent,
"usb-phy", 0);
- else
+ } else {
musb->xceiv = devm_usb_get_phy_dev(dev, 0);
+ musb->phy = devm_phy_get(dev, musb->phy_label);
+ }
if (IS_ERR(musb->xceiv)) {
status = PTR_ERR(musb->xceiv);
@@ -364,6 +374,10 @@ static int omap2430_musb_init(struct musb *musb)
return -EPROBE_DEFER;
}
+ if (IS_ERR(musb->phy)) {
+ pr_err("HS USB OTG: no PHY configured\n");
+ return PTR_ERR(musb->phy);
+ }
musb->isr = omap2430_musb_interrupt;
status = pm_runtime_get_sync(dev);
@@ -397,7 +411,7 @@ static int omap2430_musb_init(struct musb *musb)
if (glue->status != OMAP_MUSB_UNKNOWN)
omap_musb_set_mailbox(glue);
- usb_phy_init(musb->xceiv);
+ phy_init(musb->phy);
pm_runtime_put_noidle(musb->controller);
return 0;
@@ -460,6 +474,7 @@ static int omap2430_musb_exit(struct musb *musb)
del_timer_sync(&musb_idle_timer);
omap2430_low_level_exit(musb);
+ phy_exit(musb->phy);
return 0;
}
@@ -633,7 +648,7 @@ static int omap2430_runtime_suspend(struct device *dev)
OTG_INTERFSEL);
omap2430_low_level_exit(musb);
- usb_phy_set_suspend(musb->xceiv, 1);
+ phy_power_off(musb->phy);
}
return 0;
@@ -648,8 +663,7 @@ static int omap2430_runtime_resume(struct device *dev)
omap2430_low_level_init(musb);
musb_writel(musb->mregs, OTG_INTERFSEL,
musb->context.otg_interfsel);
-
- usb_phy_set_suspend(musb->xceiv, 0);
+ phy_power_on(musb->phy);
}
return 0;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists