| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAB=otbR-n7f=O3+YTPnfO6wRWz2aEcUnbjHoD746GsNgFW3tzQ@mail.gmail.com>
Date: Mon, 22 Jul 2013 19:24:13 +0300
From: Ruslan Bilovol <ruslan.bilovol@...com>
To: Nishanth Menon <nm@...com>
Cc: benoit.cousson@...aro.org, tony@...mide.com,
devicetree-discuss@...ts.ozlabs.org, linux-omap@...r.kernel.org,
linux-kernel@...r.kernel.org, uri.y@...iscite.com
Subject: Re: [PATCH] arm: dts: twl6030: typical connection to omap4 as a
separate dtsi file
Hi Nishanth,
On Fri, Jul 19, 2013 at 5:10 PM, Nishanth Menon <nm@...com> wrote:
>
> On 07/19/2013 07:10 AM, Ruslan Bilovol wrote:
>>
>> The OMAP4 SoC family uses specially-designed
>> PMIC (power management IC) companion chip for power
>> management needs: TWL6030/TWL6032.
>> Therefore there is a typical connection of PMIC to OMAP4
>> so we can figure it out into separate .dtsi file
>> and do not duplicate over board-specific files.
>>
>> Tested on OMAP4 SDP board and compile-tested for Panda board
>>
>> Signed-off-by: Ruslan Bilovol <ruslan.bilovol@...com>
>> ---
>> arch/arm/boot/dts/omap4-panda-common.dtsi | 21 +---------------
>> arch/arm/boot/dts/omap4-sdp.dts | 21 +---------------
>> arch/arm/boot/dts/twl6030_omap4.dtsi | 38
>> +++++++++++++++++++++++++++++
>
> arch/arm/boot/dts/omap4-var-som.dts ?
There is no muxing for TWL6030 in that file at all, so I didn't add it.
Moreover, that file seems to be not maintained since added (just
generic fixes or framework changes that came to all other files)
Second thing - I do not have schematics and HW for verification.
But if somebody from Variscite can confirm that omap4 is typically
connected to PMIC, I'm happy to add it as separate patch.
So I CCed Uri Yosef who is original author of the omap4-var-som.dts
Regards,
Ruslan
>
>> 3 files changed, 40 insertions(+), 40 deletions(-)
>> create mode 100644 arch/arm/boot/dts/twl6030_omap4.dtsi
>>
>> diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi
>> b/arch/arm/boot/dts/omap4-panda-common.dtsi
>> index faa95b5..d796302 100644
>> --- a/arch/arm/boot/dts/omap4-panda-common.dtsi
>> +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
>> @@ -109,23 +109,9 @@
>> };
>> };
>>
>> -&omap4_pmx_wkup {
>> - pinctrl-names = "default";
>> - pinctrl-0 = <
>> - &twl6030_wkup_pins
>> - >;
>> -
>> - twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
>> - pinctrl-single,pins = <
>> - 0x14 (PIN_OUTPUT | MUX_MODE2) /*
>> fref_clk0_out.sys_drm_msecure */
>> - >;
>> - };
>> -};
>> -
>> &omap4_pmx_core {
>> pinctrl-names = "default";
>> pinctrl-0 = <
>> - &twl6030_pins
>> &twl6040_pins
>> &mcpdm_pins
>> &mcbsp1_pins
>> @@ -134,12 +120,6 @@
>> &hsusbb1_pins
>> >;
>>
>> - twl6030_pins: pinmux_twl6030_pins {
>> - pinctrl-single,pins = <
>> - 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)
>> /* sys_nirq1.sys_nirq1 */
>> - >;
>> - };
>> -
>> twl6040_pins: pinmux_twl6040_pins {
>> pinctrl-single,pins = <
>> 0xe0 (PIN_OUTPUT | MUX_MODE3) /*
>> hdq_sio.gpio_127 */
>> @@ -265,6 +245,7 @@
>> };
>>
>> #include "twl6030.dtsi"
>> +#include "twl6030_omap4.dtsi"
>>
>> &i2c2 {
>> pinctrl-names = "default";
>> diff --git a/arch/arm/boot/dts/omap4-sdp.dts
>> b/arch/arm/boot/dts/omap4-sdp.dts
>> index 7951b4e..91030c3 100644
>> --- a/arch/arm/boot/dts/omap4-sdp.dts
>> +++ b/arch/arm/boot/dts/omap4-sdp.dts
>> @@ -142,23 +142,9 @@
>> };
>> };
>>
>> -&omap4_pmx_wkup {
>> - pinctrl-names = "default";
>> - pinctrl-0 = <
>> - &twl6030_wkup_pins
>> - >;
>> -
>> - twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
>> - pinctrl-single,pins = <
>> - 0x14 (PIN_OUTPUT | MUX_MODE2) /*
>> fref_clk0_out.sys_drm_msecure */
>> - >;
>> - };
>> -};
>> -
>> &omap4_pmx_core {
>> pinctrl-names = "default";
>> pinctrl-0 = <
>> - &twl6030_pins
>> &twl6040_pins
>> &mcpdm_pins
>> &dmic_pins
>> @@ -193,12 +179,6 @@
>> >;
>> };
>>
>> - twl6030_pins: pinmux_twl6030_pins {
>> - pinctrl-single,pins = <
>> - 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)
>> /* sys_nirq1.sys_nirq1 */
>> - >;
>> - };
>> -
>> twl6040_pins: pinmux_twl6040_pins {
>> pinctrl-single,pins = <
>> 0xe0 (PIN_OUTPUT | MUX_MODE3) /*
>> hdq_sio.gpio_127 */
>> @@ -337,6 +317,7 @@
>> };
>>
>> #include "twl6030.dtsi"
>> +#include "twl6030_omap4.dtsi"
>>
>> &i2c2 {
>> pinctrl-names = "default";
>> diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi
>> b/arch/arm/boot/dts/twl6030_omap4.dtsi
>> new file mode 100644
>> index 0000000..a4fa570
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/twl6030_omap4.dtsi
>> @@ -0,0 +1,38 @@
>> +/*
>> + * Copyright (C) 2013 Texas Instruments Incorporated -
>> http://www.ti.com/
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +&twl {
>> + /*
>> + * On most OMAP4 platforms, the twl6030 IRQ line is connected
>> + * to the SYS_NIRQ1 line on OMAP and the twl6030 MSECURE line is
>> + * connected to the fref_clk0_out.sys_drm_msecure line.
>> + * Therefore, configure the defaults for the SYS_NIRQ1 and
>> + * fref_clk0_out.sys_drm_msecure pins here.
>> + */
>> + pinctrl-names = "default";
>> + pinctrl-0 = <
>> + &twl6030_pins
>> + &twl6030_wkup_pins
>> + >;
>> +};
>> +
>> +&omap4_pmx_wkup {
>> + twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
>> + pinctrl-single,pins = <
>> + 0x14 (PIN_OUTPUT | MUX_MODE2) /*
>> fref_clk0_out.sys_drm_msecure */
>> + >;
>> + };
>> +};
>> +
>> +&omap4_pmx_core {
>> + twl6030_pins: pinmux_twl6030_pins {
>> + pinctrl-single,pins = <
>> + 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)
>> /* sys_nirq1.sys_nirq1 */
>> + >;
>> + };
>> +};
>>
>
>
> --
> Regards,
> Nishanth Menon
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists