[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1374709940-607-1-git-send-email-yann.cantin@laposte.net>
Date: Thu, 25 Jul 2013 01:52:18 +0200
From: Yann Cantin <yann.cantin@...oste.net>
To: linux-input@...r.kernel.org, linux-usb@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, linux-doc@...r.kernel.org,
dmitry.torokhov@...il.com, jkosina@...e.cz, rob@...dley.net,
gregkh@...uxfoundation.org
Subject: [RFC ebeam PATCH 0/2] new USB eBeam input driver
Hi,
New USB input driver for eBeam devices.
Currently supported (tested) :
- Luidia eBeam classic projection and edge projection models
- Nec "interactive solution" NP01Wi1 & NP01Wi2 accessories.
>From basic usb point of view, all these devices are
indistinguishable : they have the same usb ids and (blank) hid
report descriptors. There's other re-branded hardware that need to be
test, but i bet on same ids.
Patch 1 to blacklist the devices for hid generic-usb.
Patch 2 is the actual driver.
Notable stuff :
- use div64_s64 for portable 64/64-bits divisions.
- 13 sysfs custom files : 9 values for the transformation matrix,
4 for xy ranges and a calibration trigger.
The module run fine since 3.3.6 kernel, both x86_32 and 64, actually
run in production on a 3.8.13 and compile without errors on
today's linus tree.
Side note :
- This driver was first submit and discuss last year.
Thanks for your help.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists