[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11.0-rc2-next20130725-6-iniza-small (sedat.dilek@gmail.com@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Thu Jul 25 17:34:28 CEST 2013 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro text [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask FE0000000 write-back [ 0.000000] 6 base 11FE00000 mask FFFE00000 uncachable [ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0204c000, 0x0204cfff] PGTABLE [ 0.000000] BRK [0x0204d000, 0x0204dfff] PGTABLE [ 0.000000] BRK [0x0204e000, 0x0204efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff] [ 0.000000] [mem 0x11fc00000-0x11fdfffff] page 2M [ 0.000000] BRK [0x0204f000, 0x0204ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff] [ 0.000000] [mem 0x11c000000-0x11fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff] [ 0.000000] [mem 0x40200000-0xd9bfffff] page 2M [ 0.000000] [mem 0xd9c00000-0xd9c9efff] page 4k [ 0.000000] BRK [0x02050000, 0x02050fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff] [ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k [ 0.000000] RAMDISK: [mem 0x37962000-0x37ca8fff] [ 0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD) [ 0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002) [ 0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD SNB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000daf47000 00040 [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001) [ 0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000dafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01 Iffs IffsAsl 00003000 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff] [ 0.000000] NODE_DATA [mem 0x11fdf7000-0x11fdfbfff] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xd9c9efff] [ 0.000000] node 0: [mem 0xdafff000-0xdaffffff] [ 0.000000] node 0: [mem 0x100000000-0x11fdfffff] [ 0.000000] On node 0 totalpages: 1021500 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12127 pages used for memmap [ 0.000000] DMA32 zone: 886944 pages, LIFO batch:31 [ 0.000000] Normal zone: 1785 pages used for memmap [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd9c9f000-0xdae7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdae7f000-0xdaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s87552 r8192 d23040 u262144 [ 0.000000] pcpu-alloc: s87552 r8192 d23040 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1007376 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro text [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3938460K/4086000K available (7119K kernel code, 1044K rwdata, 3132K rodata, 1332K init, 1984K bss, 147540K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 0 of 0 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1596.440 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.88 BogoMIPS (lpj=6385760) [ 0.000081] pid_max: default: 32768 minimum: 301 [ 0.000246] Security Framework initialized [ 0.000304] AppArmor: AppArmor initialized [ 0.000340] Yama: becoming mindful. [ 0.000750] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001857] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002359] Mount-cache hash table entries: 256 [ 0.002913] Initializing cgroup subsys memory [ 0.003011] Initializing cgroup subsys devices [ 0.003050] Initializing cgroup subsys freezer [ 0.003088] Initializing cgroup subsys blkio [ 0.003126] Initializing cgroup subsys perf_event [ 0.003165] Initializing cgroup subsys hugetlb [ 0.003252] Disabled fast string operations [ 0.003290] CPU: Physical Processor ID: 0 [ 0.003326] CPU: Processor Core ID: 0 [ 0.003366] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003366] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003432] mce: CPU supports 7 MCE banks [ 0.003483] CPU0: Thermal monitoring enabled (TM1) [ 0.003528] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.003528] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.003528] tlb_flushall_shift: 5 [ 0.003701] Freeing SMP alternatives memory: 24K (ffffffff81e54000 - ffffffff81e5a000) [ 0.004790] ACPI: Core revision 20130626 [ 0.015648] ACPI: All ACPI Tables successfully acquired [ 0.029570] ftrace: allocating 27066 entries in 106 pages [ 0.045162] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.084863] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07) [ 0.085477] TSC deadline timer enabled [ 0.085490] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.085638] ... version: 3 [ 0.085674] ... bit width: 48 [ 0.085710] ... generic registers: 4 [ 0.085747] ... value mask: 0000ffffffffffff [ 0.085785] ... max period: 0000ffffffffffff [ 0.085823] ... fixed-purpose events: 3 [ 0.085859] ... event mask: 000000070000000f [ 0.098982] Disabled fast string operations [ 0.102164] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.113842] Disabled fast string operations [ 0.127552] Disabled fast string operations [ 0.087908] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.129686] Brought up 4 CPUs [ 0.129791] smpboot: Total of 4 processors activated (12771.52 BogoMIPS) [ 0.133893] devtmpfs: initialized [ 0.135945] EVM: security.selinux [ 0.135980] EVM: security.SMACK64 [ 0.136015] EVM: security.capability [ 0.136141] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes) [ 0.137682] regulator-dummy: no parameters [ 0.137871] NET: Registered protocol family 16 [ 0.138213] cpuidle: using governor ladder [ 0.138250] cpuidle: using governor menu [ 0.138329] ACPI: bus type PCI registered [ 0.138480] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.138539] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.145353] PCI: Using configuration type 1 for base access [ 0.148747] bio: create slab at 0 [ 0.149204] ACPI: Added _OSI(Module Device) [ 0.149242] ACPI: Added _OSI(Processor Device) [ 0.149279] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.149316] ACPI: Added _OSI(Processor Aggregator Device) [ 0.151116] ACPI: EC: Look up EC in DSDT [ 0.177533] ACPI: Executed 1 blocks of module-level executable AML code [ 0.183591] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.195258] ACPI: SSDT 00000000dae70718 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.195846] ACPI: Dynamic OEM Table Load: [ 0.195916] ACPI: SSDT (null) 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.205976] ACPI: SSDT 00000000dae71a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.206642] ACPI: Dynamic OEM Table Load: [ 0.206711] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.217882] ACPI: SSDT 00000000dae6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.218442] ACPI: Dynamic OEM Table Load: [ 0.218511] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.231871] ACPI: Interpreter enabled [ 0.231922] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130626/hwxface-571) [ 0.232030] ACPI: (supports S0 S1 S3 S4 S5) [ 0.232067] ACPI: Using IOAPIC for interrupt routing [ 0.232160] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.232445] ACPI: No dock devices found. [ 0.256156] ACPI: Power Resource [FN00] (off) [ 0.256379] ACPI: Power Resource [FN01] (off) [ 0.256596] ACPI: Power Resource [FN02] (off) [ 0.256811] ACPI: Power Resource [FN03] (off) [ 0.257031] ACPI: Power Resource [FN04] (off) [ 0.258214] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.258589] \_SB_.PCI0:_OSC invalid UUID [ 0.258591] _OSC request data:1 8 0 [ 0.259563] PCI host bridge to bus 0000:00 [ 0.259602] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.259643] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.259684] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.259724] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.259766] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.259808] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.259864] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.260017] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.260030] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.260038] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.260043] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.260217] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.260243] pci 0000:00:16.0: reg 0x10: [mem 0xf0705000-0xf070500f 64bit] [ 0.260329] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.260482] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.260506] pci 0000:00:1a.0: reg 0x10: [mem 0xf070a000-0xf070a3ff] [ 0.260608] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.260713] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.260731] pci 0000:00:1b.0: reg 0x10: [mem 0xf0700000-0xf0703fff 64bit] [ 0.260809] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.260855] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.260961] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.261053] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.261101] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.261210] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.261299] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.261360] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.261469] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.261559] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.261690] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.261714] pci 0000:00:1d.0: reg 0x10: [mem 0xf0709000-0xf07093ff] [ 0.261815] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.261920] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.262117] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.262139] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.262149] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097] [ 0.262159] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.262169] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093] [ 0.262178] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.262189] pci 0000:00:1f.2: reg 0x24: [mem 0xf0708000-0xf07087ff] [ 0.262241] pci 0000:00:1f.2: PME# supported from D3hot [ 0.262357] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.262375] pci 0000:00:1f.3: reg 0x10: [mem 0xf0704000-0xf07040ff 64bit] [ 0.262400] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.262772] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000 [ 0.262954] pci 0000:01:00.0: reg 0x10: [mem 0xf0600000-0xf0601fff 64bit] [ 0.263663] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.263834] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.269832] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.269876] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.270055] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.270126] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.270249] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref] [ 0.270325] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref] [ 0.270662] pci 0000:02:00.0: supports D1 D2 [ 0.270664] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.270787] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.277762] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.277826] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.277835] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.277960] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.277997] pci 0000:03:00.0: reg 0x10: [mem 0xf0500000-0xf0507fff 64bit] [ 0.278196] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.285738] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.285815] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.285998] \_SB_.PCI0:_OSC invalid UUID [ 0.286000] _OSC request data:1 1f 0 [ 0.286005] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.286061] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.286976] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.287326] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.287720] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.288067] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.288413] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.288786] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.289179] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.289530] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.290407] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.290485] ACPI: \_SB_.PCI0: notify handler is installed [ 0.290547] Found 1 acpi root devices [ 0.290616] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.290972] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.291030] vgaarb: loaded [ 0.291063] vgaarb: bridge control possible 0000:00:02.0 [ 0.291777] SCSI subsystem initialized [ 0.291814] ACPI: bus type ATA registered [ 0.291948] libata version 3.00 loaded. [ 0.292010] ACPI: bus type USB registered [ 0.292091] usbcore: registered new interface driver usbfs [ 0.292154] usbcore: registered new interface driver hub [ 0.292248] usbcore: registered new device driver usb [ 0.292631] PCI: Using ACPI for IRQ routing [ 0.294342] PCI: pci_cache_line_size set to 64 bytes [ 0.294453] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.294456] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff] [ 0.294458] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.294460] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff] [ 0.294705] NetLabel: Initializing [ 0.294740] NetLabel: domain hash size = 128 [ 0.294776] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.294859] NetLabel: unlabeled traffic allowed by default [ 0.294989] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.295180] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.297241] Switched to clocksource hpet [ 0.314949] AppArmor: AppArmor Filesystem Enabled [ 0.315038] pnp: PnP ACPI init [ 0.315088] ACPI: bus type PNP registered [ 0.315506] pnp 00:00: [dma 4] [ 0.315549] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.315595] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.315761] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.315820] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.315898] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.315941] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.315982] system 00:04: [io 0x5000-0x5003] has been reserved [ 0.316022] system 00:04: [io 0xffff] has been reserved [ 0.316062] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.316103] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.316144] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.316184] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.316225] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.316265] system 00:04: [io 0x5000-0x500f] could not be reserved [ 0.316308] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.316358] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.316450] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.316493] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.316551] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.316635] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active) [ 0.316947] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.316990] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.317032] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.317073] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.317115] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.317157] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.317198] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.317251] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.317294] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.317336] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.317379] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.318092] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.318132] pnp: PnP ACPI: found 11 devices [ 0.318169] ACPI: bus type PNP unregistered [ 0.326264] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.326308] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.326358] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.326398] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.326445] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.326506] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.326548] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.327020] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.327022] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.327024] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.327027] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff] [ 0.327028] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.327031] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff] [ 0.327033] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.327035] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.327037] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.327173] NET: Registered protocol family 2 [ 0.327579] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.327816] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes) [ 0.328147] TCP: Hash tables configured (established 32768 bind 32768) [ 0.328445] TCP: reno registered [ 0.328498] UDP hash table entries: 2048 (order: 5, 196608 bytes) [ 0.328602] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes) [ 0.328897] NET: Registered protocol family 1 [ 0.328953] pci 0000:00:02.0: Boot video device [ 0.329745] PCI: CLS 64 bytes, default 64 [ 0.329955] Trying to unpack rootfs image as initramfs... [ 0.405741] Freeing initrd memory: 3356K (ffff880037962000 - ffff880037ca9000) [ 0.405801] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.405843] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff] [ 0.406276] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28 [ 0.406324] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28 [ 0.406376] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28 [ 0.406429] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28 [ 0.406553] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.406611] Scanning for low memory corruption every 60 seconds [ 0.407251] Initialise module verification [ 0.407354] audit: initializing netlink socket (disabled) [ 0.407414] type=2000 audit(1374774047.392:1): initialized [ 0.437614] bounce pool size: 64 pages [ 0.438175] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.438898] VFS: Disk quotas dquot_6.5.2 [ 0.438977] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.439849] fuse init (API version 7.22) [ 0.439994] msgmni has been set to 7698 [ 0.440702] Key type asymmetric registered [ 0.440740] Asymmetric key parser 'x509' registered [ 0.440826] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.440939] io scheduler noop registered [ 0.440976] io scheduler deadline registered (default) [ 0.441050] io scheduler cfq registered [ 0.441520] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.441600] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.441786] intel_idle: MWAIT substates: 0x21120 [ 0.441788] intel_idle: v0.4 model 0x2A [ 0.441789] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.442541] ACPI: AC Adapter [ADP1] (on-line) [ 0.442870] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.443146] ACPI: Lid Switch [LID0] [ 0.443256] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.443323] ACPI: Power Button [PWRB] [ 0.443426] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.443487] ACPI: Power Button [PWRF] [ 0.443622] ACPI: Fan [FAN0] (off) [ 0.443710] ACPI: Fan [FAN1] (off) [ 0.443793] ACPI: Fan [FAN2] (off) [ 0.443879] ACPI: Fan [FAN3] (off) [ 0.443966] ACPI: Fan [FAN4] (off) [ 0.444086] ACPI: Requesting acpi_cpufreq [ 0.447705] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.447746] ACPI: Thermal Zone [TZ00] (67 C) [ 0.448160] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.448199] ACPI: Thermal Zone [TZ01] (30 C) [ 0.448286] GHES: HEST is not enabled! [ 0.448524] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.453913] ACPI: Battery Slot [BAT1] (battery present) [ 0.453931] Linux agpgart interface v0.103 [ 0.456672] brd: module loaded [ 0.458027] loop: module loaded [ 0.458304] mei_me 0000:00:16.0: setting latency timer to 64 [ 0.458352] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [ 0.461642] ahci 0000:00:1f.2: version 3.0 [ 0.461824] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.462015] ahci: SSS flag set, parallel bus scan disabled [ 0.477267] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode [ 0.477329] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 0.477389] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.502135] scsi0 : ahci [ 0.502474] scsi1 : ahci [ 0.502723] scsi2 : ahci [ 0.503006] scsi3 : ahci [ 0.503257] scsi4 : ahci [ 0.503508] scsi5 : ahci [ 0.503644] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 41 [ 0.503700] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 41 [ 0.503754] ata3: DUMMY [ 0.503788] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 41 [ 0.503842] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 41 [ 0.503896] ata6: DUMMY [ 0.504918] libphy: Fixed MDIO Bus: probed [ 0.505249] tun: Universal TUN/TAP device driver, 1.6 [ 0.505287] tun: (C) 1999-2004 Max Krasnyansky [ 0.505423] PPP generic driver version 2.4.2 [ 0.505581] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.505622] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 0.505631] ehci-pci: EHCI PCI platform driver [ 0.505872] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.505881] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.505929] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.506003] ehci-pci 0000:00:1a.0: debug port 2 [ 0.506043] ehci-pci 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 0.506047] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 0.506085] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.509955] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.509957] ehci-pci 0000:00:1a.0: supports USB remote wakeup [ 0.509997] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000 [ 0.510038] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.521196] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.521331] usb usb1: default language 0x0409 [ 0.521343] usb usb1: udev 1, busnum 1, minor = 0 [ 0.521345] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.521386] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.521438] usb usb1: Product: EHCI Host Controller [ 0.521475] usb usb1: Manufacturer: Linux 3.11.0-rc2-next20130725-6-iniza-small ehci_hcd [ 0.521528] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.521801] usb usb1: usb_probe_device [ 0.521805] usb usb1: configuration #1 chosen from 1 choice [ 0.521817] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.521850] hub 1-0:1.0: usb_probe_interface [ 0.521852] hub 1-0:1.0: usb_probe_interface - got id [ 0.521855] hub 1-0:1.0: USB hub found [ 0.521896] hub 1-0:1.0: 2 ports detected [ 0.521932] hub 1-0:1.0: standalone hub [ 0.521933] hub 1-0:1.0: no power switching (usb 1.0) [ 0.521935] hub 1-0:1.0: individual port over-current protection [ 0.521936] hub 1-0:1.0: power on to power good time: 20ms [ 0.521941] hub 1-0:1.0: local power source is good [ 0.521991] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.522264] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.522271] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.522314] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.522384] ehci-pci 0000:00:1d.0: debug port 2 [ 0.522424] ehci-pci 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 0.522427] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 0.522460] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.526332] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.526334] ehci-pci 0000:00:1d.0: supports USB remote wakeup [ 0.526383] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000 [ 0.526425] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.537182] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.537319] usb usb2: default language 0x0409 [ 0.537331] usb usb2: udev 1, busnum 2, minor = 128 [ 0.537334] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.537374] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.537427] usb usb2: Product: EHCI Host Controller [ 0.537464] usb usb2: Manufacturer: Linux 3.11.0-rc2-next20130725-6-iniza-small ehci_hcd [ 0.537517] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.537790] usb usb2: usb_probe_device [ 0.537794] usb usb2: configuration #1 chosen from 1 choice [ 0.537806] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.537836] hub 2-0:1.0: usb_probe_interface [ 0.537837] hub 2-0:1.0: usb_probe_interface - got id [ 0.537840] hub 2-0:1.0: USB hub found [ 0.537882] hub 2-0:1.0: 2 ports detected [ 0.537917] hub 2-0:1.0: standalone hub [ 0.537919] hub 2-0:1.0: no power switching (usb 1.0) [ 0.537920] hub 2-0:1.0: individual port over-current protection [ 0.537922] hub 2-0:1.0: power on to power good time: 20ms [ 0.537927] hub 2-0:1.0: local power source is good [ 0.537978] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.538059] ehci-platform: EHCI generic platform driver [ 0.538113] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.538152] ohci_hcd: block sizes: ed 80 td 96 [ 0.538160] ohci-pci: OHCI PCI platform driver [ 0.538214] ohci-platform: OHCI generic platform driver [ 0.538264] uhci_hcd: USB Universal Host Controller Interface driver [ 0.538546] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.538590] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 [ 0.548357] xhci_hcd 0000:03:00.0: supports USB remote wakeup [ 0.548397] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X [ 0.548405] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X [ 0.548415] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X [ 0.548425] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X [ 0.548433] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X [ 0.548720] usb usb3: default language 0x0409 [ 0.548733] usb usb3: udev 1, busnum 3, minor = 256 [ 0.548735] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.548778] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.548833] usb usb3: Product: xHCI Host Controller [ 0.548872] usb usb3: Manufacturer: Linux 3.11.0-rc2-next20130725-6-iniza-small xhci_hcd [ 0.548936] usb usb3: SerialNumber: 0000:03:00.0 [ 0.549169] usb usb3: usb_probe_device [ 0.549173] usb usb3: configuration #1 chosen from 1 choice [ 0.549179] xHCI xhci_add_endpoint called for root hub [ 0.549181] xHCI xhci_check_bandwidth called for root hub [ 0.549189] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.549222] hub 3-0:1.0: usb_probe_interface [ 0.549223] hub 3-0:1.0: usb_probe_interface - got id [ 0.549226] hub 3-0:1.0: USB hub found [ 0.549274] hub 3-0:1.0: 2 ports detected [ 0.549310] hub 3-0:1.0: standalone hub [ 0.549312] hub 3-0:1.0: no power switching (usb 1.0) [ 0.549313] hub 3-0:1.0: individual port over-current protection [ 0.549315] hub 3-0:1.0: Single TT [ 0.549316] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.549318] hub 3-0:1.0: power on to power good time: 20ms [ 0.549323] hub 3-0:1.0: local power source is good [ 0.549360] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.549427] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.549469] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 0.549529] xhci_hcd 0000:03:00.0: supports USB remote wakeup [ 0.549564] usb usb4: skipped 1 descriptor after endpoint [ 0.549569] usb usb4: default language 0x0409 [ 0.549581] usb usb4: udev 1, busnum 4, minor = 384 [ 0.549583] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.549624] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.549677] usb usb4: Product: xHCI Host Controller [ 0.549715] usb usb4: Manufacturer: Linux 3.11.0-rc2-next20130725-6-iniza-small xhci_hcd [ 0.549770] usb usb4: SerialNumber: 0000:03:00.0 [ 0.549985] usb usb4: usb_probe_device [ 0.549988] usb usb4: configuration #1 chosen from 1 choice [ 0.549993] xHCI xhci_add_endpoint called for root hub [ 0.549994] xHCI xhci_check_bandwidth called for root hub [ 0.550001] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 0.550029] hub 4-0:1.0: usb_probe_interface [ 0.550031] hub 4-0:1.0: usb_probe_interface - got id [ 0.550033] hub 4-0:1.0: USB hub found [ 0.550079] hub 4-0:1.0: 2 ports detected [ 0.550114] hub 4-0:1.0: standalone hub [ 0.550115] hub 4-0:1.0: no power switching (usb 1.0) [ 0.550117] hub 4-0:1.0: individual port over-current protection [ 0.550119] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.550120] hub 4-0:1.0: power on to power good time: 20ms [ 0.550125] hub 4-0:1.0: local power source is good [ 0.550159] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 0.561289] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12 [ 0.567737] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.567780] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.568203] mousedev: PS/2 mouse device common for all mice [ 0.568875] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.568952] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.569095] device-mapper: uevent: version 1.0.3 [ 0.569309] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com [ 0.569371] Intel P-state driver initializing. [ 0.569424] Intel pstate controlling: cpu 0 [ 0.569507] Intel pstate controlling: cpu 1 [ 0.569575] Intel pstate controlling: cpu 2 [ 0.569642] Intel pstate controlling: cpu 3 [ 0.569761] ledtrig-cpu: registered to indicate activity on CPUs [ 0.570070] ashmem: initialized [ 0.570269] TCP: cubic registered [ 0.570448] NET: Registered protocol family 10 [ 0.570984] NET: Registered protocol family 17 [ 0.571045] Key type dns_resolver registered [ 0.571600] PM: Hibernation image not present or could not be loaded. [ 0.571610] Loading module verification certificates [ 0.573088] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: a2ad22ff269cf3edb7bee68bb0ba84343d8fa185' [ 0.573186] registered taskstats version 1 [ 0.576294] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.577519] Key type trusted registered [ 0.584451] Key type encrypted registered [ 0.592448] rtc_cmos 00:05: setting system clock to 2013-07-25 17:40:48 UTC (1374774048) [ 0.593361] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.593439] EDD information not available. [ 0.621139] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.621156] hub 1-0:1.0: port 1: status 0501 change 0001 [ 0.637145] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.637163] hub 2-0:1.0: port 1: status 0501 change 0001 [ 0.649209] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.649230] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.649246] hub 3-0:1.0: hub_suspend [ 0.649256] usb usb3: bus auto-suspend, wakeup 1 [ 0.649307] hub 4-0:1.0: hub_suspend [ 0.649311] usb usb4: bus auto-suspend, wakeup 1 [ 0.658039] usb usb4: usb wakeup-resume [ 0.658052] usb usb4: usb auto-resume [ 0.669106] hub 4-0:1.0: hub_resume [ 0.669137] hub 4-0:1.0: port 1: status 0203 change 0001 [ 0.721136] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 0.721164] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 0.777257] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 0.777270] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 0.821003] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.822262] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133 [ 0.822339] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.823787] ata1.00: configured for UDMA/133 [ 0.824302] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5 [ 0.824965] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.825007] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.825175] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.825756] sd 0:0:0:0: [sda] Write Protect is off [ 0.825828] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.826050] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.832932] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.845426] sda: sda1 sda2 sda3 [ 0.846757] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.889177] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 0.889191] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 0.965620] usb 1-1: udev 2, busnum 1, minor = 1 [ 0.965631] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 0.965702] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.966085] usb 1-1: usb_probe_device [ 0.966094] usb 1-1: configuration #1 chosen from 1 choice [ 0.966364] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 0.966448] hub 1-1:1.0: usb_probe_interface [ 0.966453] hub 1-1:1.0: usb_probe_interface - got id [ 0.966460] hub 1-1:1.0: USB hub found [ 0.966712] hub 1-1:1.0: 6 ports detected [ 0.967324] hub 1-1:1.0: standalone hub [ 0.967328] hub 1-1:1.0: individual port power switching [ 0.967331] hub 1-1:1.0: individual port over-current protection [ 0.967334] hub 1-1:1.0: Single TT [ 0.967338] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.967341] hub 1-1:1.0: power on to power good time: 100ms [ 0.967858] hub 1-1:1.0: local power source is good [ 0.968272] hub 1-1:1.0: enabling power on all ports [ 0.969469] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 0.969487] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 1.025081] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 1.025095] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.069267] hub 1-1:1.0: port 2: status 0101 change 0001 [ 1.070033] hub 1-1:1.0: port 4: status 0101 change 0001 [ 1.080830] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.137002] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 1.137017] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.144781] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.145448] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133 [ 1.145527] ata2.00: 31277232 sectors, multi 1: LBA48 [ 1.146280] ata2.00: configured for UDMA/133 [ 1.146828] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 SSD PQ: 0 ANSI: 5 [ 1.147355] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1.147416] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.147757] sd 1:0:0:0: [sdb] Write Protect is off [ 1.147827] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.147885] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.149336] sdb: sdb1 sdb2 [ 1.150542] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.168753] usb 1-1: link qh256-0001/ffff88011868d8c0 start 1 [1/0 us] [ 1.213447] usb 2-1: udev 2, busnum 2, minor = 129 [ 1.213458] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.213532] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.213958] usb 2-1: usb_probe_device [ 1.213968] usb 2-1: configuration #1 chosen from 1 choice [ 1.214185] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 1.214271] hub 2-1:1.0: usb_probe_interface [ 1.214276] hub 2-1:1.0: usb_probe_interface - got id [ 1.214284] hub 2-1:1.0: USB hub found [ 1.214540] hub 2-1:1.0: 6 ports detected [ 1.214611] hub 2-1:1.0: standalone hub [ 1.214615] hub 2-1:1.0: individual port power switching [ 1.214619] hub 2-1:1.0: individual port over-current protection [ 1.214622] hub 2-1:1.0: Single TT [ 1.214626] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.214630] hub 2-1:1.0: power on to power good time: 100ms [ 1.214909] hub 2-1:1.0: local power source is good [ 1.215454] hub 2-1:1.0: enabling power on all ports [ 1.216784] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 1.216806] hub 4-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s [ 1.317860] hub 2-1:1.0: port 5: status 0101 change 0001 [ 1.332213] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1.345200] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 1.345636] usb 4-1: skipped 1 descriptor after endpoint [ 1.345645] usb 4-1: skipped 1 descriptor after endpoint [ 1.345789] usb 4-1: default language 0x0409 [ 1.346165] usb 4-1: udev 2, busnum 4, minor = 385 [ 1.346171] usb 4-1: New USB device found, idVendor=174c, idProduct=55aa [ 1.346243] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1.346315] usb 4-1: Product: MEDION HDDrive-n-GO [ 1.346380] usb 4-1: Manufacturer: MEDION [ 1.346444] usb 4-1: SerialNumber: 3180000000000000092C [ 1.346824] usb 4-1: usb_probe_device [ 1.346830] usb 4-1: configuration #1 chosen from 1 choice [ 1.347917] usb 4-1: Successful Endpoint Configure command [ 1.348055] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 1.348293] hub 1-1:1.0: state 7 ports 6 chg 0014 evt 0000 [ 1.348417] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 1.404575] tsc: Refined TSC clocksource calibration: 1596.373 MHz [ 1.416588] usb 2-1: link qh256-0001/ffff88011871ecc0 start 1 [1/0 us] [ 1.420783] usb 1-1.2: new low-speed USB device number 3 using ehci-pci [ 1.464546] ata4: SATA link down (SStatus 0 SControl 300) [ 1.515856] usb 1-1.2: skipped 1 descriptor after interface [ 1.516329] usb 1-1.2: default language 0x0409 [ 1.519012] usb 1-1.2: udev 3, busnum 1, minor = 2 [ 1.519024] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e [ 1.519099] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.519189] usb 1-1.2: Product: USB-PS/2 Optical Mouse [ 1.519255] usb 1-1.2: Manufacturer: Logitech [ 1.519687] usb 1-1.2: usb_probe_device [ 1.519697] usb 1-1.2: configuration #1 chosen from 1 choice [ 1.520243] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [ 1.520697] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s [ 1.592668] usb 1-1.4: new high-speed USB device number 4 using ehci-pci [ 1.784316] ata5: SATA link down (SStatus 0 SControl 300) [ 1.787207] Freeing unused kernel memory: 1332K (ffffffff81d07000 - ffffffff81e54000) [ 1.787297] Write protecting the kernel read-only data: 12288k [ 1.792777] Freeing unused kernel memory: 1060K (ffff8800016f7000 - ffff880001800000) [ 1.797454] Freeing unused kernel memory: 964K (ffff880001b0f000 - ffff880001c00000) [ 1.834188] usb 1-1.4: skipped 1 descriptor after configuration [ 1.834195] usb 1-1.4: skipped 5 descriptors after interface [ 1.834200] usb 1-1.4: skipped 1 descriptor after endpoint [ 1.834203] usb 1-1.4: skipped 23 descriptors after interface [ 1.836397] usb 1-1.4: default language 0x0409 [ 1.836679] udevd[122]: starting version 175 [ 1.848261] usb 1-1.4: udev 4, busnum 1, minor = 3 [ 1.848269] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018 [ 1.848333] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.848397] usb 1-1.4: Product: WebCam SC-13HDL11431N [ 1.848443] usb 1-1.4: Manufacturer: 123 [ 1.848959] usb 1-1.4: usb_probe_device [ 1.848964] usb 1-1.4: configuration #1 chosen from 1 choice [ 1.849131] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0) [ 1.987812] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.987900] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.988360] r8169 0000:02:00.0: irq 47 for MSI/MSI-X [ 1.989504] usb-storage 4-1:1.0: usb_probe_interface [ 1.989516] usb-storage 4-1:1.0: usb_probe_interface - got id [ 1.989522] usb-storage 4-1:1.0: USB Mass Storage device detected [ 1.989948] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000620000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47 [ 1.990014] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.990799] scsi6 : usb-storage 4-1:1.0 [ 1.991054] usbcore: registered new interface driver usb-storage [ 2.021140] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1) [ 2.021277] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0000 [ 2.021382] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s [ 2.042097] hidraw: raw HID events driver (C) Jiri Kosina [ 2.045034] usbhid 1-1.2:1.0: usb_probe_interface [ 2.045040] usbhid 1-1.2:1.0: usb_probe_interface - got id [ 2.051253] usbcore: registered new interface driver usbhid [ 2.051298] usbhid: USB HID core driver [ 2.058455] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 [ 2.058800] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0 [ 2.092122] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 2.188671] usb 2-1.5: udev 3, busnum 2, minor = 130 [ 2.188682] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189 [ 2.188756] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.189142] usb 2-1.5: usb_probe_device [ 2.189149] usb 2-1.5: configuration #1 chosen from 1 choice [ 2.189678] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0) [ 2.190086] usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1) [ 2.190663] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0010 [ 2.190776] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0020 [ 2.403971] Switched to clocksource tsc [ 2.797073] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 2.988145] scsi 6:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6 [ 2.988976] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2.989054] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.989598] sd 6:0:0:0: [sdc] Write Protect is off [ 2.989666] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 2.990113] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.992828] sdc: sdc1 sdc2 sdc3 [ 2.995043] sd 6:0:0:0: [sdc] Attached SCSI disk [ 14.642346] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k FS [ 14.666802] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro [ 14.700717] udevd[622]: starting version 175 [ 15.006656] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130626/utaddress-251) [ 15.006667] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.006674] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130626/utaddress-251) [ 15.006680] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.006682] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130626/utaddress-251) [ 15.006687] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.006689] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130626/utaddress-251) [ 15.006694] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.006696] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 15.146854] lp: driver loaded but no devices found [ 15.316372] wmi: Mapper loaded [ 15.317170] samsung_laptop: detected SABI interface: SwSmi@ [ 15.317175] samsung_laptop: Backlight controlled by ACPI video driver [ 15.323795] ppdev: user-space parallel port driver [ 15.383681] Bluetooth: Core ver 2.16 [ 15.383743] NET: Registered protocol family 31 [ 15.383746] Bluetooth: HCI device and connection manager initialized [ 15.384762] Bluetooth: HCI socket layer initialized [ 15.384776] Bluetooth: L2CAP socket layer initialized [ 15.384807] Bluetooth: SCO socket layer initialized [ 15.397622] cfg80211: Calling CRDA to update world regulatory domain [ 15.407128] cfg80211: World regulatory domain updated: [ 15.407134] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.407137] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.407140] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.407142] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.407144] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.407147] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.565167] Linux video capture interface: v2.00 [ 15.616774] btusb 2-1.5:1.0: usb_probe_interface [ 15.616780] btusb 2-1.5:1.0: usb_probe_interface - got id [ 15.617348] usbcore: registered new interface driver btusb [ 15.617886] usb 2-1.5: link qh1-0e01/ffff880119bbe4c0 start 0 [1/2 us] [ 15.780498] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.780504] Bluetooth: BNEP filters: protocol multicast [ 15.780523] Bluetooth: BNEP socket layer initialized [ 15.870702] Bluetooth: RFCOMM TTY layer initialized [ 15.870729] Bluetooth: RFCOMM socket layer initialized [ 15.870732] Bluetooth: RFCOMM ver 1.11 [ 16.007921] type=1400 audit(1374766863.922:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=904 comm="apparmor_parser" [ 16.008113] type=1400 audit(1374766863.922:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=874 comm="apparmor_parser" [ 16.008712] type=1400 audit(1374766863.922:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=904 comm="apparmor_parser" [ 16.009196] type=1400 audit(1374766863.922:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=904 comm="apparmor_parser" [ 16.009251] type=1400 audit(1374766863.922:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=874 comm="apparmor_parser" [ 16.009966] type=1400 audit(1374766863.922:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=874 comm="apparmor_parser" [ 16.018958] [drm] Initialized drm 1.1.0 20060810 [ 16.071086] init: failsafe main process (996) killed by TERM signal [ 16.177876] type=1400 audit(1374766864.090:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=961 comm="apparmor_parser" [ 16.179154] type=1400 audit(1374766864.094:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=961 comm="apparmor_parser" [ 16.363201] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 16.363206] Copyright(c) 2003-2013 Intel Corporation [ 16.363304] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 16.363682] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X [ 16.365494] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 16.368239] type=1400 audit(1374766864.282:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1113 comm="apparmor_parser" [ 16.369047] type=1400 audit(1374766864.282:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1113 comm="apparmor_parser" [ 16.866525] uvcvideo 1-1.4:1.0: usb_probe_interface [ 16.866532] uvcvideo 1-1.4:1.0: usb_probe_interface - got id [ 16.866574] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018) [ 16.886226] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input5 [ 16.886520] usbcore: registered new interface driver uvcvideo [ 16.886524] USB Video Class driver (1.1.1) [ 16.889344] usb 1-1.4: link qh16-0001/ffff8800be433440 start 2 [1/0 us] [ 16.889412] usb 1-1.4: unlink qh16-0001/ffff8800be433440 start 2 [1/0 us] [ 17.045591] [drm] Memory usable by graphics device = 2048M [ 17.045603] i915 0000:00:02.0: setting latency timer to 64 [ 17.047203] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 17.047209] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 17.047212] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 17.047214] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled [ 17.047218] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 17.047269] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 17.086272] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 17.086290] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 17.086292] [drm] Driver supports precise vblank timestamp query. [ 17.086471] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 17.096949] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 17.096952] [drm] This can cause pipe underruns and display issues. [ 17.096953] [drm] Please upgrade your BIOS to fix this. [ 17.111419] fbcon: inteldrmfb (fb0) is primary device [ 17.123155] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 17.123687] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00) [ 17.139295] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 17.145995] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 17.146728] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c. [ 17.225230] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 [ 17.418517] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 17.425140] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 17.503109] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 18.159831] Console: switching to colour frame buffer device 170x48 [ 18.162774] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 18.162775] i915 0000:00:02.0: registered panic notifier [ 18.179605] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 18.180079] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 18.189993] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 18.191692] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 18.227264] init: alsa-restore main process (1191) terminated with status 19 [ 18.246372] usb 1-1.2: link qh8-0e01/ffff8800c0dbacc0 start 3 [1/2 us] [ 18.261208] usb 1-1.2: unlink qh8-0e01/ffff8800c0dbacc0 start 3 [1/2 us] [ 18.263626] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 18.265732] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 18.267157] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 18.307451] init: plymouth-splash main process (1274) terminated with status 1 [ 18.318160] init: lightdm main process (1235) killed by TERM signal [ 18.705065] init: plymouth-stop pre-start process (1450) terminated with status 1 [ 18.792682] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 18.888447] usb 1-1.4: usb auto-suspend, wakeup 0 [ 23.706048] wlan0: authenticate with 00:04:0e:e4:00:3d [ 23.710711] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 23.712398] wlan0: authenticated [ 23.712639] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 23.712648] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 23.716689] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 23.720200] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 23.726730] wlan0: associated [ 23.726850] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready