[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <86ppu6tsmu.fsf@miki.keithp.com>
Date: Thu, 25 Jul 2013 11:13:29 -0700
From: Keith Packard <keithp@...thp.com>
To: Daniel Vetter <daniel@...ll.ch>
Cc: Daniel Vetter <daniel@...ll.ch>, linux-kernel@...r.kernel.org,
Dave Airlie <airlied@...hat.com>,
dri-devel@...ts.freedesktop.org
Subject: Re: [PATCH 4/5] drm/i915: Add async page flip support for IVB
Daniel Vetter <daniel@...ll.ch> writes:
> On Wed, Jul 24, 2013 at 06:40:16PM -0700, Keith Packard wrote:
>> Daniel Vetter <daniel@...ll.ch> writes:
>>
>> > We could just unconditionally increase the alignement in
>> > intel_pin_and_fence_fb_obj - we already have more strict requirements due
>> > to a bunch of w/a in other places. So shouldn't hurt at all really.
>>
>> That seems like a fine plan; 32kB isn't that onerous. Do you want the
>> trivial patch to do this from me then?
>
> Yes please, merging patches from other people is much easier than begging for
> review for my own ;-)
> -Daniel
Here's a replacement for patch #4 that just adds the alignment
requirement there. Do you want any other changes in this series?
From 9a51e7118fce58c835cabb192f6b6e0a4a5f6660 Mon Sep 17 00:00:00 2001
From: Keith Packard <keithp@...thp.com>
Date: Mon, 22 Jul 2013 18:12:28 -0700
Subject: [PATCH 4/5] drm/i915: Add async page flip support for IVB
This adds the necesary register defines for async page flipping
through the command ring, and then hooks those up for Ivybridge (gen7)
page flipping.
Signed-off-by: Keith Packard <keithp@...thp.com>
---
drivers/gpu/drm/i915/i915_reg.h | 6 +++++
drivers/gpu/drm/i915/intel_display.c | 46 ++++++++++++++++++++++++++++++++----
2 files changed, 48 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index dc3d6a7..029cfb0 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -209,6 +209,7 @@
#define MI_LOAD_SCAN_LINES_INCL MI_INSTR(0x12, 0)
#define MI_DISPLAY_FLIP MI_INSTR(0x14, 2)
#define MI_DISPLAY_FLIP_I915 MI_INSTR(0x14, 1)
+#define MI_DISPLAY_FLIP_ASYNC_INDICATOR (1 << 22)
#define MI_DISPLAY_FLIP_PLANE(n) ((n) << 20)
/* IVB has funny definitions for which plane to flip. */
#define MI_DISPLAY_FLIP_IVB_PLANE_A (0 << 19)
@@ -217,6 +218,11 @@
#define MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19)
#define MI_DISPLAY_FLIP_IVB_PLANE_C (4 << 19)
#define MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19)
+/* These go in the bottom of the base address value */
+#define MI_DISPLAY_FLIP_TYPE_SYNC (0 << 0)
+#define MI_DISPLAY_FLIP_TYPE_ASYNC (1 << 0)
+#define MI_DISPLAY_FLIP_TYPE_STEREO (2 << 0)
+#define MI_DISPLAY_FLIP_TYPE_SYNCHRONOUS (0 << 0)
#define MI_ARB_ON_OFF MI_INSTR(0x08, 0)
#define MI_ARB_ENABLE (1<<0)
#define MI_ARB_DISABLE (0<<0)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index bdb8854..f2624a4 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1833,8 +1833,10 @@ intel_pin_and_fence_fb_obj(struct drm_device *dev,
alignment = 64 * 1024;
break;
case I915_TILING_X:
- /* pin() will align the object as required by fence */
- alignment = 0;
+ /* Async page flipping requires X tiling and 32kB alignment, so just
+ * make all X tiled frame buffers aligned for that
+ */
+ alignment = 32 * 1024;
break;
case I915_TILING_Y:
/* Despite that we check this in framebuffer_init userspace can
@@ -7514,6 +7516,8 @@ static int intel_gen7_queue_flip(struct drm_device *dev,
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
uint32_t plane_bit = 0;
+ uint32_t cmd;
+ uint32_t base;
int ret;
ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
@@ -7536,13 +7540,43 @@ static int intel_gen7_queue_flip(struct drm_device *dev,
goto err_unpin;
}
+ cmd = MI_DISPLAY_FLIP_I915 | plane_bit;
+ base = i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset;
+
+ if (flags & DRM_MODE_PAGE_FLIP_ASYNC) {
+
+ /* XXX check limitations for async flip here */
+
+ if (fb->pitches[0] != I915_READ(DSPSTRIDE(intel_crtc->plane))) {
+ WARN_ONCE(1, "mismatching stride in async plane flip (%d != %d)\n",
+ fb->pitches[0], I915_READ(DSPSTRIDE(intel_crtc->plane)));
+ ret = -EINVAL;
+ goto err_unpin;
+ }
+
+ if (obj->tiling_mode != I915_TILING_X) {
+ WARN_ONCE(1, "async plane flip requires X tiling\n");
+ ret = -EINVAL;
+ goto err_unpin;
+ }
+
+ if ((I915_READ(DSPCNTR(intel_crtc->plane)) & DISPPLANE_TILED) == 0) {
+ WARN_ONCE(1, "display not currently tiled in async plane flip\n");
+ ret = -EINVAL;
+ goto err_unpin;
+ }
+
+ cmd |= MI_DISPLAY_FLIP_ASYNC_INDICATOR;
+ base |= MI_DISPLAY_FLIP_TYPE_ASYNC;
+ }
+
ret = intel_ring_begin(ring, 4);
if (ret)
goto err_unpin;
- intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
+ intel_ring_emit(ring, cmd);
intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
- intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
+ intel_ring_emit(ring, base);
intel_ring_emit(ring, (MI_NOOP));
intel_mark_page_flip_active(intel_crtc);
@@ -9705,6 +9739,10 @@ void intel_modeset_init(struct drm_device *dev)
dev->mode_config.max_width = 8192;
dev->mode_config.max_height = 8192;
}
+
+ if (IS_GEN7(dev))
+ dev->mode_config.async_page_flip = true;
+
dev->mode_config.fb_base = dev_priv->gtt.mappable_base;
DRM_DEBUG_KMS("%d display pipe%s available.\n",
--
1.8.3.2
--
keith.packard@...el.com
Content of type "application/pgp-signature" skipped
Powered by blists - more mailing lists