| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 26 Jul 2013 00:09:32 +0000
From: "Zheng, Lv" <lv.zheng@...el.com>
To: "Rafael J. Wysocki" <rjw@...k.pl>
CC: "Wysocki, Rafael J" <rafael.j.wysocki@...el.com>,
"Brown, Len" <len.brown@...el.com>,
Corey Minyard <minyard@....org>,
"Zhao, Yakui" <yakui.zhao@...el.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-acpi@...r.kernel.org" <linux-acpi@...r.kernel.org>,
"openipmi-developer@...ts.sourceforge.net"
<openipmi-developer@...ts.sourceforge.net>
Subject: RE: [PATCH 03/13] ACPI/IPMI: Fix race caused by the unprotected
ACPI IPMI transfers
> From: Rafael J. Wysocki [mailto:rjw@...k.pl]
> Sent: Thursday, July 25, 2013 8:07 PM
>
> On Thursday, July 25, 2013 03:09:35 AM Zheng, Lv wrote:
> > -stable according to the previous conversation.
> >
> > > From: Rafael J. Wysocki [mailto:rjw@...k.pl]
> > > Sent: Thursday, July 25, 2013 7:38 AM
> > >
> > > On Tuesday, July 23, 2013 04:09:15 PM Lv Zheng wrote:
> > > > This patch fixes races caused by unprotected ACPI IPMI transfers.
> > > >
> > > > We can see the following crashes may occur:
> > > > 1. There is no tx_msg_lock held for iterating tx_msg_list in
> > > > ipmi_flush_tx_msg() while it is parellel unlinked on failure in
> > > > acpi_ipmi_space_handler() under protection of tx_msg_lock.
> > > > 2. There is no lock held for freeing tx_msg in acpi_ipmi_space_handler()
> > > > while it is parellel accessed in ipmi_flush_tx_msg() and
> > > > ipmi_msg_handler().
> > > >
> > > > This patch enhances tx_msg_lock to protect all tx_msg accesses to
> > > > solve this issue. Then tx_msg_lock is always held around
> > > > complete() and tx_msg accesses.
> > > > Calling smp_wmb() before setting msg_done flag so that messages
> > > > completed due to flushing will not be handled as 'done' messages
> > > > while their contents are not vaild.
> > > >
> > > > Signed-off-by: Lv Zheng <lv.zheng@...el.com>
> > > > Cc: Zhao Yakui <yakui.zhao@...el.com>
> > > > Reviewed-by: Huang Ying <ying.huang@...el.com>
> > > > ---
> > > > drivers/acpi/acpi_ipmi.c | 10 ++++++++--
> > > > 1 file changed, 8 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/drivers/acpi/acpi_ipmi.c b/drivers/acpi/acpi_ipmi.c
> > > > index
> > > > b37c189..527ee43 100644
> > > > --- a/drivers/acpi/acpi_ipmi.c
> > > > +++ b/drivers/acpi/acpi_ipmi.c
> > > > @@ -230,11 +230,14 @@ static void ipmi_flush_tx_msg(struct
> > > acpi_ipmi_device *ipmi)
> > > > struct acpi_ipmi_msg *tx_msg, *temp;
> > > > int count = HZ / 10;
> > > > struct pnp_dev *pnp_dev = ipmi->pnp_dev;
> > > > + unsigned long flags;
> > > >
> > > > + spin_lock_irqsave(&ipmi->tx_msg_lock, flags);
> > > > list_for_each_entry_safe(tx_msg, temp, &ipmi->tx_msg_list, head) {
> > > > /* wake up the sleep thread on the Tx msg */
> > > > complete(&tx_msg->tx_complete);
> > > > }
> > > > + spin_unlock_irqrestore(&ipmi->tx_msg_lock, flags);
> > > >
> > > > /* wait for about 100ms to flush the tx message list */
> > > > while (count--) {
> > > > @@ -268,13 +271,12 @@ static void ipmi_msg_handler(struct
> > > ipmi_recv_msg *msg, void *user_msg_data)
> > > > break;
> > > > }
> > > > }
> > > > - spin_unlock_irqrestore(&ipmi_device->tx_msg_lock, flags);
> > > >
> > > > if (!msg_found) {
> > > > dev_warn(&pnp_dev->dev,
> > > > "Unexpected response (msg id %ld) is returned.\n",
> > > > msg->msgid);
> > > > - goto out_msg;
> > > > + goto out_lock;
> > > > }
> > > >
> > > > /* copy the response data to Rx_data buffer */ @@ -286,10
> > > > +288,14 @@ static void ipmi_msg_handler(struct ipmi_recv_msg *msg,
> > > > void
> > > *user_msg_data)
> > > > }
> > > > tx_msg->rx_len = msg->msg.data_len;
> > > > memcpy(tx_msg->data, msg->msg.data, tx_msg->rx_len);
> > > > + /* tx_msg content must be valid before setting msg_done flag */
> > > > + smp_wmb();
> > >
> > > That's suspicious.
> > >
> > > If you need the write barrier here, you'll most likely need a read
> > > barrier somewhere else. Where's that?
> >
> > It might depend on whether the content written before the smp_wmb() is
> used or not by the other side codes under the condition set after the
> smp_wmb().
> >
> > So comment could be treated as 2 parts:
> > 1. do we need a paired smp_rmb().
> > 2. do we need a smp_wmb().
> >
> > For 1.
> > If we want a paired smp_rmb(), then it will appear in this function:
> >
> > 186 static void acpi_format_ipmi_response(struct acpi_ipmi_msg *msg,
> > 187 acpi_integer *value, int rem_time)
> > 188 {
> > 189 struct acpi_ipmi_buffer *buffer;
> > 190
> > 191 /*
> > 192 * value is also used as output parameter. It represents the
> response
> > 193 * IPMI message returned by IPMI command.
> > 194 */
> > 195 buffer = (struct acpi_ipmi_buffer *)value;
> > 196 if (!rem_time && !msg->msg_done) {
> > 197 buffer->status = ACPI_IPMI_TIMEOUT;
> > 198 return;
> > 199 }
> > 200 /*
> > 201 * If the flag of msg_done is not set or the recv length is zero,
> it
> > 202 * means that the IPMI command is not executed correctly.
> > 203 * The status code will be ACPI_IPMI_UNKNOWN.
> > 204 */
> > 205 if (!msg->msg_done || !msg->rx_len) {
> > 206 buffer->status = ACPI_IPMI_UNKNOWN;
> > 207 return;
> > 208 }
> > + smp_rmb();
> > 209 /*
> > 210 * If the IPMI response message is obtained correctly, the
> status code
> > 211 * will be ACPI_IPMI_OK
> > 212 */
> > 213 buffer->status = ACPI_IPMI_OK;
> > 214 buffer->length = msg->rx_len;
> > 215 memcpy(buffer->data, msg->rx_data, msg->rx_len);
> > 216 }
> >
> > If we don't then there will only be msg content not correctly read from
> msg->rx_data.
> > Note that the rx_len is 0 during initialization and will never exceed the
> sizeof(buffer->data), so the read is safe.
> >
> > Being without smp_rmb() is also OK in this case, since:
> > 1. buffer->data will never be used when buffer->status is not
> > ACPI_IPMI_OK and 2. the smp_rmb()/smp_wmb() added in this patch will be
> deleted in [PATCH 07].
> >
> > So IMO, we needn't add the smp_rmb(), what do you think of this?
> >
> > For 2.
> > If we don't add smp_wmb() in the ipmi_msg_handler(), then the codes
> running on other thread in the acpi_format_ipmi_response() may read wrong
> msg->rx_data (a timeout triggers this function, but when
> acpi_format_ipmi_response() is entered, the msg->msg_done flag could be
> seen as 1 but the msg->rx_data is not ready), this is what we want to avoid in
> this quick fix.
>
> Using smp_wmb() without the complementary smp_rmb() doesn't makes sense,
> because each of them prevents only one flow of control from being
> speculatively reordered, either by the CPU or by the compiler. If only one of
> them is used without the other, then the flow of control without the barrier
> may be reordered in a way that will effectively cancel the effect of the barrier in
> the second flow of control.
>
> So, either we need *both* smp_wmb() and smp_rmb(), or we don't need them
> at all.
I think you are right, it is about order of L1 cache flushing.
The smp_wmb()/smp_rmb() is not a useful approach for non-tuning implementations.
It's here because the code used a combined programing model, and thus a bug.
Such bugs can be avoided by:
1. either using bigger granularity locks, in this case, tx_msg_lock should be held around acpi_format_ipmi_response()
2. or using smaller granularity locks, races are automatically avoided by the excluded running flows (like what the PATCH 07 shows)
I'll update this patch or even drop it.
Thanks and best regards
-Lv
>
> Thanks,
> Rafael
>
>
> --
> I speak only for myself.
> Rafael J. Wysocki, Intel Open Source Technology Center.
Powered by blists - more mailing lists