linux-kernel - Re: [PATCH 3/5] devicetree: create a separate binding description for sata

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <51F2998A.7070304@gmail.com>
Date:	Fri, 26 Jul 2013 10:45:14 -0500
From:	Rob Herring <robherring2@...il.com>
To:	Mark Langsdorf <mark.langsdorf@...xeda.com>
CC:	linux-kernel@...r.kernel.org, linux-ide@...r.kernel.org,
	tj@...nel.org, devicetree@...r.kernel.org, pawel.moll@....com,
	mark.rutland@....com, swarren@...dotorg.org,
	ian.campbell@...rix.com
Subject: Re: [PATCH 3/5] devicetree: create a separate binding description
 for sata_highbank

On 07/26/2013 10:11 AM, Mark Langsdorf wrote:
> The Calxeda sata_highbank driver has been adding its descriptions to the
> ahci driver. Separate them properly.
>
> Signed-off-by: Mark Langsdorf <mark.langsdorf@...xeda.com>

Acked-by: Rob Herring <rob.herring@...xeda.com>

Rob

> ---
>  .../devicetree/bindings/ata/ahci-platform.txt      | 14 ++--------
>  .../devicetree/bindings/ata/sata_highbank.txt      | 32 ++++++++++++++++++++++
>  2 files changed, 34 insertions(+), 12 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/ata/sata_highbank.txt
> 
> diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> index 3ec0c5c..14d7b22 100644
> --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
> +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> @@ -4,27 +4,17 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
>  Each SATA controller should have its own node.
>  
>  Required properties:
> -- compatible        : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci"
> +- compatible        : compatible list, contains "snps,spear-ahci"
>  - interrupts        : <interrupt mapping for SATA IRQ>
>  - reg               : <registers mapping>
>  
>  Optional properties:
> -- calxeda,port-phys: phandle-combophy and lane assignment, which maps each
> -			SATA port to a combophy and a lane within that
> -			combophy
> -- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
> -			which indicates that the driver supports SGPIO
> -			indicator lights using the indicated GPIOs
> -- calxeda,led-order : a u32 array that map port numbers to offsets within the
> -			SGPIO bitstream.
>  - dma-coherent      : Present if dma operations are coherent
>  
>  Example:
>          sata@...08000 {
> -		compatible = "calxeda,hb-ahci";
> +		compatible = "snps,spear-ahci";
>                  reg = <0xffe08000 0x1000>;
>                  interrupts = <115>;
> -		calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1
> -					&combophy0 2 &combophy0 3>;
>  
>          };
> diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.txt b/Documentation/devicetree/bindings/ata/sata_highbank.txt
> new file mode 100644
> index 0000000..aa1b798
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ata/sata_highbank.txt
> @@ -0,0 +1,32 @@
> +* Calxeda AHCI SATA Controller
> +
> +SATA nodes are defined to describe on-chip Serial ATA controllers.
> +The Calxeda SATA controller mostly conforms to the AHCI interface
> +with some special extensions to add functionality.
> +Each SATA controller should have its own node.
> +
> +Required properties:
> +- compatible        : compatible list, contains "calxeda,hb-ahci"
> +- interrupts        : <interrupt mapping for SATA IRQ>
> +- reg               : <registers mapping>
> +
> +Optional properties:
> +- dma-coherent      : Present if dma operations are coherent
> +- calxeda,port-phys: phandle-combophy and lane assignment, which maps each
> +			SATA port to a combophy and a lane within that
> +			combophy
> +- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
> +			which indicates that the driver supports SGPIO
> +			indicator lights using the indicated GPIOs
> +- calxeda,led-order : a u32 array that map port numbers to offsets within the
> +			SGPIO bitstream.
> +
> +Example:
> +        sata@...08000 {
> +		compatible = "calxeda,hb-ahci";
> +                reg = <0xffe08000 0x1000>;
> +                interrupts = <115>;
> +		calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1
> +					&combophy0 2 &combophy0 3>;
> +
> +        };
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/