| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <51F34F8D.4000106@overkiz.com> Date: Sat, 27 Jul 2013 06:41:49 +0200 From: boris brezillon <b.brezillon@...rkiz.com> To: Boris BREZILLON <b.brezillon@...rkiz.com> CC: Nicolas Ferre <nicolas.ferre@...el.com>, Ludovic Desroches <ludovic.desroches@...el.com>, Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>, Mike Turquette <mturquette@...aro.org>, linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org Subject: Re: [PATCH v2 00/42] ARM: at91: move to common clk framework Hello, This email is a feedback on the discussion I had with Jean-Christophe last Wednesday. As discussed with him, I will try to split this patch series in order to 1) limit the number of patches to review 2) limit the number of SoCs/boards to test The new at91 clk support on non-dt boards was also discussed, and Jean-Christophe thinks this is not mandatory (and should be dropped). Does anyone see an interest in keeping this support in the next version of the patch series ? Here is how he though this patch series could be splitted: 1) at91 common clk implemenations + 1 SoC and the associated dt boards 2) 1 SoC and the associated dt boards ...)1 SoC and the associated dt boards I tried to prepare the first new patch series by including only at91sam9260/9g20 SoCs and boards but I failed. In fact I succeed but it breaks multi-soc support (using dt) because we can't use both the common clk framework and the at91 specific clk framework (they both provides the same set of functions and structures definitions). Should I break the multi-soc support to add at91 common clk ? The only SoC that could be added without breaking multi-soc support is the sama5 as it uses a different arm architecture (ARMv7) and thus cannot be compiled in the same kernel as other at91 socs. Should I choose the sama5 for the next patch series ? Jean-Christophe, could you at least review the 11 first patches of this series ? I won't send any new version until I get some feedback from you on the clk implementations and dt bindings... Berst Regards, Boris Le 17/07/2013 15:34, Boris BREZILLON a écrit : > Hello, > > This patch series is a proposal to move at91 clock implementation > to common clk framework. > > Most of the clock provided by the PMC (Power Management Controller) are > implemented : > - main clock (main oscillator) > - pll clocks > - master clock > - programmable clocks > - utmi clock > - peripheral clocks > - system clocks > > This implementation is compatible with device tree: the goal is > to define the whole clock tree in the device tree (all currently > available dt SoCs and boards are patched to support dt clocks). > Please feel free to comment the dt bindinds. > > I removed the register_clocks function in SoC supporting dt boards only: > - at91sam9x5 SoCs > - at91sam9n12 SoC > - sama5d3 SoCs > > This patch series is based on linux-next and has been tested on sama5d31ek > board using device tree. It compiles for other SoCs and both with and without > dt support, but it has not been tested. > > BTW could other people test it on other boards (I only have a kizbox and > a sama5d31ek dev kit). > > Best Regards, > Boris > > Changes since v1: > - fix bugs in pll, programmable and system clock implementations > (wrong bit position). > - add usb clock configuration support (ohci and udc drivers + > clk_lookup for non dt boards) > - rework of the system clock interfaces (no need to define a parent clock, > system clock is a gate with no rate info) > - change system, peripheral and programmable clk dt bindings (1 master node > and multiple child nodes each defining a system/peripheral or prog clock) > - fix bugs in sama5 dt definition > > Boris BREZILLON (42): > ARM: at91: move at91_pmc.h to include/linux/clk/at91.h > ARM: at91: add PMC main clock > ARM: at91: add PMC pll clocks > ARM: at91: add PMC master clock > ARM: at91: add PMC system clocks > ARM: at91: add PMC peripheral clocks > ARM: at91: add PMC programmable clocks > ARM: at91: add PMC utmi clock > ARM: at91: add PMC usb clock > ARM: at91: add PMC smd clock > ARM: at91: add PMC clk device tree binding doc. > ARM: at91: move to common clk framework > ARM: at91: move at91rm9200 SoC to new at91 clk implem > ARM: at91: move at91sam9260 SoC to new at91 clk implem > ARM: at91: move at91sam9261 SoC to new at91 clk implem > ARM: at91: move at91sam9263 SoC to new at91 clk implem > ARM: at91: move at91sam9g45 SoC to new at91 clk implem > ARM: at91: move at91sam9n12 SoC to new at91 clk implem > ARM: at91: move at91sam9rl SoC to new at91 clk implem > ARM: at91: move at91sam9x5 SoCs to new at91 clk implem > ARM: at91: move at91sam9 SoCs to new at91 clk implem > ARM: at91: move sama5d3 SoCs to new at91 clk implem > ARM: at91: move at91rm9200 boards to new at91 clk implem > ARM: at91: move at91sam9 boards to new at91 clk implem > ARM: at91: move pit timer to common clk framework > USB: ohci-at91: add usb_clk for transition to common clk framework > usb: gadget: at91_udc: add usb_clk for transition to common clk > framework > ARM: at91/dt: move at91rm9200 SoC to new at91 clk implem > ARM: at91/dt: move at91sam9260 SoC to new at91 clk implem > ARM: at91/dt: move at91sam9263 SoC to new at91 clk implem > ARM: at91/dt: move at91sam9g45 SoC to new at91 clk implem > ARM: at91/dt: move at91sam9n12 SoC to new at91 clk implem > ARM: at91/dt: move at91sam9x5 SoCs to new at91 clk implem > ARM: at91/dt: move at91sam9g20 SoC to new at91 clk implem > ARM: at91/dt: move sama5d3 SoCs to new at91 clk implem > ARM: at91/dt: move sam9260/sam9g20 to new at91 clk implem > ARM: at91/dt: move rm9200 boards to new at91 clk implem > ARM: at91/dt: move sam9263 boards to new at91 clk implem > ARM: at91/dt: move sam9g45 boards to new at91 clk implem > ARM: at91/dt: move sam9n12 boards to new at91 clk implem > ARM: at91/dt: move sam9x5 boards to new at91 clk implem > ARM: at91/dt: move sama5d3 boards to new at91 clk implem > > .../devicetree/bindings/clock/at91-clock.txt | 262 ++++++ > arch/arm/boot/dts/animeo_ip.dts | 17 +- > arch/arm/boot/dts/at91-ariag25.dts | 17 +- > arch/arm/boot/dts/at91rm9200.dtsi | 231 +++++ > arch/arm/boot/dts/at91rm9200ek.dts | 17 +- > arch/arm/boot/dts/at91sam9260.dtsi | 236 +++++ > arch/arm/boot/dts/at91sam9263.dtsi | 237 +++++ > arch/arm/boot/dts/at91sam9263ek.dts | 17 +- > arch/arm/boot/dts/at91sam9g15.dtsi | 1 + > arch/arm/boot/dts/at91sam9g20.dtsi | 37 + > arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 17 +- > arch/arm/boot/dts/at91sam9g25.dtsi | 3 + > arch/arm/boot/dts/at91sam9g35.dtsi | 2 + > arch/arm/boot/dts/at91sam9g45.dtsi | 257 +++++ > arch/arm/boot/dts/at91sam9m10g45ek.dts | 17 +- > arch/arm/boot/dts/at91sam9n12.dtsi | 251 +++++ > arch/arm/boot/dts/at91sam9n12ek.dts | 17 +- > arch/arm/boot/dts/at91sam9x25.dtsi | 25 +- > arch/arm/boot/dts/at91sam9x35.dtsi | 3 + > arch/arm/boot/dts/at91sam9x5.dtsi | 319 +++++-- > arch/arm/boot/dts/at91sam9x5_can.dtsi | 26 + > arch/arm/boot/dts/at91sam9x5_isi.dtsi | 22 + > arch/arm/boot/dts/at91sam9x5_lcdc.dtsi | 28 + > arch/arm/boot/dts/at91sam9x5_macb0.dtsi | 66 ++ > arch/arm/boot/dts/at91sam9x5_macb1.dtsi | 54 ++ > arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 58 ++ > arch/arm/boot/dts/ge863-pro3.dtsi | 16 +- > arch/arm/boot/dts/kizbox.dts | 5 + > arch/arm/boot/dts/mpa1600.dts | 16 +- > arch/arm/boot/dts/pm9g45.dts | 16 +- > arch/arm/boot/dts/sama5d3.dtsi | 510 ++++++---- > arch/arm/boot/dts/sama5d31ek.dts | 4 + > arch/arm/boot/dts/sama5d33ek.dts | 2 + > arch/arm/boot/dts/sama5d34ek.dts | 4 + > arch/arm/boot/dts/sama5d35ek.dts | 6 + > arch/arm/boot/dts/sama5d3_can.dtsi | 71 ++ > arch/arm/boot/dts/sama5d3_emac.dtsi | 54 ++ > arch/arm/boot/dts/sama5d3_gmac.dtsi | 87 ++ > arch/arm/boot/dts/sama5d3_lcd.dtsi | 69 ++ > arch/arm/boot/dts/sama5d3_mci2.dtsi | 57 ++ > arch/arm/boot/dts/sama5d3_tcb1.dtsi | 38 + > arch/arm/boot/dts/sama5d3_uart.dtsi | 46 + > arch/arm/boot/dts/sama5d3xcm.dtsi | 17 +- > arch/arm/boot/dts/tny_a9260_common.dtsi | 17 +- > arch/arm/boot/dts/tny_a9263.dts | 17 +- > arch/arm/boot/dts/usb_a9260_common.dtsi | 17 +- > arch/arm/boot/dts/usb_a9263.dts | 17 +- > arch/arm/mach-at91/Kconfig | 26 + > arch/arm/mach-at91/Makefile | 2 +- > arch/arm/mach-at91/at91rm9200.c | 568 +++++++----- > arch/arm/mach-at91/at91sam9260.c | 689 +++++++++----- > arch/arm/mach-at91/at91sam9261.c | 572 ++++++++---- > arch/arm/mach-at91/at91sam9263.c | 595 +++++++----- > arch/arm/mach-at91/at91sam926x_time.c | 21 +- > arch/arm/mach-at91/at91sam9g45.c | 704 ++++++++------ > arch/arm/mach-at91/at91sam9g45_devices.c | 1 - > arch/arm/mach-at91/at91sam9n12.c | 196 +--- > arch/arm/mach-at91/at91sam9rl.c | 502 ++++++---- > arch/arm/mach-at91/at91sam9x5.c | 293 +----- > arch/arm/mach-at91/board-1arm.c | 12 +- > arch/arm/mach-at91/board-afeb-9260v1.c | 11 +- > arch/arm/mach-at91/board-cam60.c | 13 +- > arch/arm/mach-at91/board-carmeva.c | 13 +- > arch/arm/mach-at91/board-cpu9krea.c | 12 +- > arch/arm/mach-at91/board-cpuat91.c | 12 +- > arch/arm/mach-at91/board-csb337.c | 11 +- > arch/arm/mach-at91/board-csb637.c | 11 +- > arch/arm/mach-at91/board-dt-rm9200.c | 9 +- > arch/arm/mach-at91/board-dt-sam9.c | 9 +- > arch/arm/mach-at91/board-dt-sama5.c | 9 +- > arch/arm/mach-at91/board-eb9200.c | 11 +- > arch/arm/mach-at91/board-ecbat91.c | 12 +- > arch/arm/mach-at91/board-eco920.c | 13 +- > arch/arm/mach-at91/board-flexibity.c | 12 +- > arch/arm/mach-at91/board-foxg20.c | 12 +- > arch/arm/mach-at91/board-gsia18s.c | 8 +- > arch/arm/mach-at91/board-kafa.c | 12 +- > arch/arm/mach-at91/board-kb9202.c | 12 +- > arch/arm/mach-at91/board-pcontrol-g20.c | 9 +- > arch/arm/mach-at91/board-picotux200.c | 11 +- > arch/arm/mach-at91/board-qil-a9260.c | 11 +- > arch/arm/mach-at91/board-rm9200ek.c | 11 +- > arch/arm/mach-at91/board-rsi-ews.c | 12 +- > arch/arm/mach-at91/board-sam9-l9260.c | 11 +- > arch/arm/mach-at91/board-sam9260ek.c | 11 +- > arch/arm/mach-at91/board-sam9261ek.c | 15 +- > arch/arm/mach-at91/board-sam9263ek.c | 11 +- > arch/arm/mach-at91/board-sam9g20ek.c | 15 +- > arch/arm/mach-at91/board-sam9m10g45ek.c | 11 +- > arch/arm/mach-at91/board-sam9rlek.c | 11 +- > arch/arm/mach-at91/board-snapper9260.c | 12 +- > arch/arm/mach-at91/board-stamp9g20.c | 15 +- > arch/arm/mach-at91/board-yl-9200.c | 12 +- > arch/arm/mach-at91/clock.c | 977 -------------------- > arch/arm/mach-at91/clock.h | 49 - > arch/arm/mach-at91/generic.h | 10 +- > arch/arm/mach-at91/pm.c | 2 +- > arch/arm/mach-at91/pm_slowclock.S | 2 +- > arch/arm/mach-at91/pmc.c | 58 ++ > arch/arm/mach-at91/sama5d3.c | 344 +------ > arch/arm/mach-at91/setup.c | 38 +- > arch/arm/mach-at91/stamp9g20.h | 2 +- > drivers/clk/Makefile | 1 + > drivers/clk/at91/Makefile | 11 + > drivers/clk/at91/clk-main.c | 106 +++ > drivers/clk/at91/clk-master.c | 317 +++++++ > drivers/clk/at91/clk-peripheral.c | 371 ++++++++ > drivers/clk/at91/clk-pll.c | 438 +++++++++ > drivers/clk/at91/clk-plldiv.c | 125 +++ > drivers/clk/at91/clk-programmable.c | 368 ++++++++ > drivers/clk/at91/clk-smd.c | 157 ++++ > drivers/clk/at91/clk-system.c | 184 ++++ > drivers/clk/at91/clk-usb.c | 303 ++++++ > drivers/clk/at91/clk-utmi.c | 114 +++ > drivers/usb/gadget/at91_udc.c | 31 +- > drivers/usb/gadget/at91_udc.h | 2 +- > drivers/usb/gadget/atmel_usba_udc.c | 2 +- > drivers/usb/host/ohci-at91.c | 16 +- > .../mach/at91_pmc.h => include/linux/clk/at91.h | 116 ++- > 119 files changed, 8193 insertions(+), 3835 deletions(-) > create mode 100644 Documentation/devicetree/bindings/clock/at91-clock.txt > create mode 100644 arch/arm/boot/dts/at91sam9x5_can.dtsi > create mode 100644 arch/arm/boot/dts/at91sam9x5_isi.dtsi > create mode 100644 arch/arm/boot/dts/at91sam9x5_lcdc.dtsi > create mode 100644 arch/arm/boot/dts/at91sam9x5_macb0.dtsi > create mode 100644 arch/arm/boot/dts/at91sam9x5_macb1.dtsi > create mode 100644 arch/arm/boot/dts/at91sam9x5_usart3.dtsi > create mode 100644 arch/arm/boot/dts/sama5d3_can.dtsi > create mode 100644 arch/arm/boot/dts/sama5d3_emac.dtsi > create mode 100644 arch/arm/boot/dts/sama5d3_gmac.dtsi > create mode 100644 arch/arm/boot/dts/sama5d3_lcd.dtsi > create mode 100644 arch/arm/boot/dts/sama5d3_mci2.dtsi > create mode 100644 arch/arm/boot/dts/sama5d3_tcb1.dtsi > create mode 100644 arch/arm/boot/dts/sama5d3_uart.dtsi > delete mode 100644 arch/arm/mach-at91/clock.c > delete mode 100644 arch/arm/mach-at91/clock.h > create mode 100644 arch/arm/mach-at91/pmc.c > create mode 100644 drivers/clk/at91/Makefile > create mode 100644 drivers/clk/at91/clk-main.c > create mode 100644 drivers/clk/at91/clk-master.c > create mode 100644 drivers/clk/at91/clk-peripheral.c > create mode 100644 drivers/clk/at91/clk-pll.c > create mode 100644 drivers/clk/at91/clk-plldiv.c > create mode 100644 drivers/clk/at91/clk-programmable.c > create mode 100644 drivers/clk/at91/clk-smd.c > create mode 100644 drivers/clk/at91/clk-system.c > create mode 100644 drivers/clk/at91/clk-usb.c > create mode 100644 drivers/clk/at91/clk-utmi.c > rename arch/arm/mach-at91/include/mach/at91_pmc.h => include/linux/clk/at91.h (78%) > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists