lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Mon, 29 Jul 2013 19:00:46 +0200 From: Philipp Zabel <p.zabel@...gutronix.de> To: linux-kernel@...r.kernel.org Cc: Mark Brown <broonie@...nel.org>, Samuel Ortiz <sameo@...ux.intel.com>, Lee Jones <lee.jones@...aro.org>, Krystian Garbaciak <krystian.garbaciak@...semi.com>, Philipp Zabel <p.zabel@...gutronix.de>, devicetree@...r.kernel.org Subject: [PATCH v3 5/6] Documentation: Add device tree bindings for DA9063 PMIC This patch adds device tree binding documentation for the Dialog Semiconductors DA9063 PMIC and its regulator nodes. Signed-off-by: Philipp Zabel <p.zabel@...gutronix.de> Cc: devicetree@...r.kernel.org --- .../devicetree/bindings/mfd/da9063-i2c.txt | 68 ++++++++++++++++++++++ 1 file changed, 68 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/da9063-i2c.txt diff --git a/Documentation/devicetree/bindings/mfd/da9063-i2c.txt b/Documentation/devicetree/bindings/mfd/da9063-i2c.txt new file mode 100644 index 0000000..776b662 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/da9063-i2c.txt @@ -0,0 +1,68 @@ +* Dialog DA9063 Power Management Integrated Circuit (PMIC) + +Required properties: +- compatible : Should be "dialog,da9063" +- interrupt-parent : phandle pointing to the interrupt controller +- interrupts : interrupt number and flags in interrupt-parent + for the chip IRQ line. Interrupt bindings are documented here: + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + +Sub-nodes: +- regulators : Contain the regulator nodes. The DA9063 regulators are + bound using their names as listed below: + + bcore1 : regulator BCORE1 + bcore2 : regulator BCORE2 + bpro : regulator BPRO + bmem : regulator BMEM + bio : regulator BIO + bperi : regulator BPERI + ldo1 : regulator LDO1 + ldo2 : regulator LDO4 + ldo3 : regulator LDO3 + ldo4 : regulator LDO4 + ldo5 : regulator LDO5 + ldo6 : regulator LDO6 + ldo7 : regulator LDO7 + ldo8 : regulator LDO8 + ldo9 : regulator LDO9 + ldo10 : regulator LDO10 + ldo11 : regulator LDO11 + + The PMIC can also be configured to merge both bcore1/2 into a single + supply and to merge bmem and bio into a single supply. In this case, + the following regulators are bound instead of bcore1/2 and bpro/bmem: + + bcores-merged : merged regulators BCORE1, BCORE2 + bmem-bio-merged : merged regulators BMEM, BIO + + See Documentation/devicetree/bindings/regulator/regulator.txt for + binding details of individual regulator device nodes. + + +Examples: + +&i2c1 { + status = "okay"; + + pmic@58 { + compatible = "dialog,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio4>; + interrupts = <17 0x8>; /* active-low GPIO4_17 */ + + regulators { + bcore1 { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1570000>; + }; + + bcore2 { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1570000>; + }; + + /* ... */ + }; + }; +}; -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists