| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1375117383-19285-2-git-send-email-nm@ti.com>
Date: Mon, 29 Jul 2013 12:03:01 -0500
From: Nishanth Menon <nm@...com>
To: Benoit Cousson <benoit.cousson@...il.com>,
Tony Lindgren <tony@...mide.com>
CC: l-o <linux-omap@...r.kernel.org>,
dt list <devicetree@...r.kernel.org>,
l-a <linux-arm-kernel@...ts.infradead.org>,
lkml <linux-kernel@...r.kernel.org>,
J Keerthy <j-keerthy@...com>, Nishanth Menon <nm@...com>
Subject: [PATCH V2 1/3] ARM: dts: omap5-uevm: document regulator signals used on the actual board
commit e00c27ef3b4c23e39d0a77b7c8e5be44c28001c7
(ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes)
introduced regulator entries for OMAP5uEVM.
However, currently we use the Palmas regulator names which is used for
different purposes on uEVM. Document the same based on 750-2628-XXX
boards - which is meant to be supported by this dts.
Reported-by: Marc Jüttner <m-juettner@...com>
Signed-off-by: Nishanth Menon <nm@...com>
Acked-by: J Keerthy <j-keerthy@...com>
---
V2: no change
V1: https://patchwork.kernel.org/patch/2828862/
arch/arm/boot/dts/omap5-uevm.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 08b7267..b430b8f 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -282,6 +282,7 @@
regulators {
smps123_reg: smps123 {
+ /* VDD_OPP_MPU */
regulator-name = "smps123";
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1500000>;
@@ -290,6 +291,7 @@
};
smps45_reg: smps45 {
+ /* VDD_OPP_MM */
regulator-name = "smps45";
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1310000>;
@@ -298,6 +300,7 @@
};
smps6_reg: smps6 {
+ /* VDD_DDR3 - over VDD_SMPS6 */
regulator-name = "smps6";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
@@ -306,6 +309,7 @@
};
smps7_reg: smps7 {
+ /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
regulator-name = "smps7";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -314,6 +318,7 @@
};
smps8_reg: smps8 {
+ /* VDD_OPP_CORE */
regulator-name = "smps8";
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1310000>;
@@ -322,6 +327,7 @@
};
smps9_reg: smps9 {
+ /* VDDA_2v1_AUD over VDD_2v1 */
regulator-name = "smps9";
regulator-min-microvolt = <2100000>;
regulator-max-microvolt = <2100000>;
@@ -331,6 +337,7 @@
};
smps10_reg: smps10 {
+ /* VBUS_5V_OTG */
regulator-name = "smps10";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -339,6 +346,7 @@
};
ldo1_reg: ldo1 {
+ /* VDDAPHY_CAM: vdda_csiport */
regulator-name = "ldo1";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
@@ -347,6 +355,7 @@
};
ldo2_reg: ldo2 {
+ /* VCC_2V8_DISP: Does not go anywhere */
regulator-name = "ldo2";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
@@ -355,6 +364,7 @@
};
ldo3_reg: ldo3 {
+ /* VDDAPHY_MDM: vdda_lli */
regulator-name = "ldo3";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
@@ -363,6 +373,7 @@
};
ldo4_reg: ldo4 {
+ /* VDDAPHY_DISP: vdda_dsiport/hdmi */
regulator-name = "ldo4";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
@@ -371,6 +382,7 @@
};
ldo5_reg: ldo5 {
+ /* VDDA_1V8_PHY: usb/sata/hdmi.. */
regulator-name = "ldo5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -379,6 +391,7 @@
};
ldo6_reg: ldo6 {
+ /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
regulator-name = "ldo6";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
@@ -387,6 +400,7 @@
};
ldo7_reg: ldo7 {
+ /* VDD_VPP: vpp1 */
regulator-name = "ldo7";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
@@ -395,6 +409,7 @@
};
ldo8_reg: ldo8 {
+ /* VDD_3v0: Does not go anywhere */
regulator-name = "ldo8";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
@@ -403,6 +418,7 @@
};
ldo9_reg: ldo9 {
+ /* VCC_DV_SDIO: vdds_sdcard */
regulator-name = "ldo9";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
@@ -411,6 +427,7 @@
};
ldoln_reg: ldoln {
+ /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
regulator-name = "ldoln";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -419,6 +436,7 @@
};
ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
regulator-name = "ldousb";
regulator-min-microvolt = <3250000>;
regulator-max-microvolt = <3250000>;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists