linux-kernel - [PATCH v4 6/8] wlcore: sdio: add wilink clock providers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1375189476-21557-7-git-send-email-coelho@ti.com>
Date:	Tue, 30 Jul 2013 16:04:34 +0300
From:	Luciano Coelho <coelho@...com>
To:	<linux-wireless@...r.kernel.org>, <tony@...mide.com>,
	<nsekhar@...com>
CC:	<coelho@...com>, <luca@...lho.fi>, <mturquette@...aro.org>,
	<mark.rutland@....com>, <balbi@...com>, <grant.likely@...aro.org>,
	<rob.herring@...xeda.com>, <devicetree-discuss@...ts.ozlabs.org>,
	<linux-doc@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<linux-omap@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>, <nm@...com>,
	<martinez.javier@...il.com>
Subject: [PATCH v4 6/8] wlcore: sdio: add wilink clock providers

Add refclock and tcxoclock as clock providers in WiLink.  These clocks
are not accesible outside the WiLink module, but they are registered
in the clock framework anyway.  Only the WiLink chip consumes these
clocks.

In theory, the WiLink chip could be connected to external clocks
instead of using these internal clocks, so make the clock consumer
code generic enough.  If external clocks are used, then the internal
clock device tree nodes are not necessary, but the external ones must
be specified.

Signed-off-by: Luciano Coelho <coelho@...com>
Reviewed-by: Felipe Balbi <balbi@...com>
---
 drivers/net/wireless/ti/wlcore/sdio.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
index 9370d7e..980bf3d 100644
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -34,6 +34,7 @@
 #include <linux/wl12xx.h>
 #include <linux/pm_runtime.h>
 #include <linux/printk.h>
+#include <linux/clk-provider.h>
 
 #include "wlcore.h"
 #include "wl12xx_80211.h"
@@ -214,10 +215,15 @@ static struct wl1271_if_operations sdio_ops = {
 	.set_block_size = wl1271_sdio_set_block_size,
 };
 
+static const struct of_device_id wlcore_sdio_of_clk_match_table[] = {
+	{ .compatible = "ti,wilink-clock" },
+};
+
 static struct wl12xx_platform_data *wlcore_get_pdata_from_of(struct device *dev)
 {
 	struct wl12xx_platform_data *pdata;
 	struct device_node *np = dev->of_node;
+	struct device_node *clock_node;
 
 	if (!np) {
 		np = of_find_matching_node(NULL, dev->driver->of_match_table);
@@ -241,6 +247,9 @@ static struct wl12xx_platform_data *wlcore_get_pdata_from_of(struct device *dev)
 		goto out_free;
 	}
 
+	for_each_matching_node(clock_node, wlcore_sdio_of_clk_match_table)
+		of_fixed_clk_setup(clock_node);
+
 	goto out;
 
 out_free:
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/