| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <51F72171.9070901@huawei.com>
Date: Tue, 30 Jul 2013 10:14:09 +0800
From: Yijing Wang <wangyijing@...wei.com>
To: Bjorn Helgaas <bhelgaas@...gle.com>
CC: "linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Hanjun Guo <guohanjun@...wei.com>,
Jiang Liu <jiang.liu@...wei.com>,
Don Dutile <ddutile@...hat.com>
Subject: Re: [PATCH] PCI: update NumVFs register properly during enable/disable
sriov
On 2013/7/29 22:31, Bjorn Helgaas wrote:
> [+cc Don]
>
> On Wed, Jul 24, 2013 at 3:26 AM, Yijing Wang <wangyijing@...wei.com> wrote:
>> Currently, we only update NumVFs register during sriov_enable().
>> This register should also be updated properly during sriov_disable.
>> Otherwise, we will get the stale "Number of VFs" info from lspci.
>
> Has this always been broken, or was it broken by a recent change?
>
> Can you post a transcript demonstrating what's going wrong? Doesn't
> have to be in the changelog unless it's short, but just something to
> help reproduce the problem.
Hi Bjorn,
It seems to be not a regression. This is not a serious problem, only
make users get stale "NumVFs" info from lspci.
Following is my demonstrating info:
euler-linux:~ # lspci -tv
-+-[0000:ff]-+-00.0 Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers
...............[snip]...................
\-[0000:00]-+-00.0 Intel Corporation 5500 I/O Hub to ESI Port
+-01.0-[0000:01]--+-00.0 Intel Corporation 82576 Gigabit Network Connection
| \-00.1 Intel Corporation 82576 Gigabit Network Connection
+-03.0-[0000:02]----00.0 LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS
+-07.0-[0000:03]--+-00.0 Intel Corporation 82576 Gigabit Network Connection ----------------->support sriov
| \-00.1 Intel Corporation 82576 Gigabit Network Connection
+-09.0-[0000:04]--+-00.0 Intel Corporation 82576 Gigabit Network Connection
| \-00.1 Intel Corporation 82576 Gigabit Network Connection
+-13.0 Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller
+-14.0 Intel Corporation 5520/5500/X58 I/O Hub System Management Registers
+-14.1 Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers
+-14.2 Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers
+-14.3 Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers
+-1a.0 Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
+-1a.7 Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
+-1d.0 Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
+-1d.1 Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
+-1d.2 Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
+-1d.7 Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
+-1e.0-[0000:05]----00.0 XGI Technology Inc. (eXtreme Graphics Innovation) Z9s/Z9m (XG21 core)
+-1f.0 Intel Corporation 82801JIB (ICH10) LPC Interface Controller
+-1f.2 Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1
+-1f.3 Intel Corporation 82801JI (ICH10 Family) SMBus Controller
\-1f.5 Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2
euler-linux:~ # lspci -vvv -s 03:00.0
03:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
Subsystem: Intel Corporation Gigabit ET Dual Port Server Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
...........[snip]................
Capabilities: [140] Device Serial Number 0c-da-21-ff-ff-ba-e2-90
Capabilities: [150] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 1
ARICtl: MFVC- ACS-, Function Group: 0
Capabilities: [160] Single Root I/O Virtualization (SR-IOV)
IOVCap: Migration-, Interrupt Message Number: 000
IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
IOVSta: Migration-
Initial VFs: 8, Total VFs: 8, Number of VFs: 0, Function Dependency Link: 00 --------------------->total is 8, current number is 0
VF offset: 128, stride: 2, Device ID: 10ca
Supported Page Size: 00000553, System Page Size: 00000001
VF Migration: offset: 00000000, BIR: 1
Kernel driver in use: igb
Kernel modules: igb
euler-linux:~ # cd /sys/bus/pci/devices/0000\:03\:00.0/
euler-linux:/sys/bus/pci/devices/0000:03:00.0 # cat sriov_numvfs
0
euler-linux:/sys/bus/pci/devices/0000:03:00.0 # cat sriov_totalvfs
7
euler-linux:/sys/bus/pci/devices/0000:03:00.0 # echo 7 > sriov_numvfs -------------------------->enable the sriov
euler-linux:/sys/bus/pci/devices/0000:03:00.0 # lspci -tv
-+-[0000:ff]-+-00.0 Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers
................[snip].....................
\-[0000:00]-+-00.0 Intel Corporation 5500 I/O Hub to ESI Port
+-01.0-[0000:01]--+-00.0 Intel Corporation 82576 Gigabit Network Connection
| \-00.1 Intel Corporation 82576 Gigabit Network Connection
+-03.0-[0000:02]----00.0 LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS
+-07.0-[0000:03]--+-00.0 Intel Corporation 82576 Gigabit Network Connection
| +-00.1 Intel Corporation 82576 Gigabit Network Connection
| +-10.0 Intel Corporation 82576 Virtual Function -------------------------->the new VFs
| +-10.2 Intel Corporation 82576 Virtual Function
| +-10.4 Intel Corporation 82576 Virtual Function
| +-10.6 Intel Corporation 82576 Virtual Function
| +-11.0 Intel Corporation 82576 Virtual Function
| +-11.2 Intel Corporation 82576 Virtual Function
| \-11.4 Intel Corporation 82576 Virtual Function
+-09.0-[0000:04]--+-00.0 Intel Corporation 82576 Gigabit Network Connection
| \-00.1 Intel Corporation 82576 Gigabit Network Connection
+-13.0 Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller
+-14.0 Intel Corporation 5520/5500/X58 I/O Hub System Management Registers
+-14.1 Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers
+-14.2 Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers
+-14.3 Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers
+-1a.0 Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
+-1a.7 Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
+-1d.0 Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
+-1d.1 Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
+-1d.2 Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
+-1d.7 Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
+-1e.0-[0000:05]----00.0 XGI Technology Inc. (eXtreme Graphics Innovation) Z9s/Z9m (XG21 core)
+-1f.0 Intel Corporation 82801JIB (ICH10) LPC Interface Controller
+-1f.2 Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1
+-1f.3 Intel Corporation 82801JI (ICH10 Family) SMBus Controller
\-1f.5 Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2
euler-linux:/sys/bus/pci/devices/0000:03:00.0 # lspci -vvv -s 03:00.0
03:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
Subsystem: Intel Corporation Gigabit ET Dual Port Server Adapter
................[snip]......................
Capabilities: [150] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 1
ARICtl: MFVC- ACS-, Function Group: 0
Capabilities: [160] Single Root I/O Virtualization (SR-IOV)
IOVCap: Migration-, Interrupt Message Number: 000
IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+
IOVSta: Migration-
Initial VFs: 8, Total VFs: 8, Number of VFs: 7, Function Dependency Link: 00 ---------------------> Number of VFs is ok, updated properly
VF offset: 128, stride: 2, Device ID: 10ca
Supported Page Size: 00000553, System Page Size: 00000001
VF Migration: offset: 00000000, BIR: 1
Kernel driver in use: igb
Kernel modules: igb
euler-linux:/sys/bus/pci/devices/0000:03:00.0 # echo 0 > sriov_numvfs ---------------------> disable sriov
euler-linux:/sys/bus/pci/devices/0000:03:00.0 # lspci -tv
-+-[0000:ff]-+-00.0 Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers
................[snip]....................
\-[0000:00]-+-00.0 Intel Corporation 5500 I/O Hub to ESI Port
+-01.0-[0000:01]--+-00.0 Intel Corporation 82576 Gigabit Network Connection
| \-00.1 Intel Corporation 82576 Gigabit Network Connection
+-03.0-[0000:02]----00.0 LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS
+-07.0-[0000:03]--+-00.0 Intel Corporation 82576 Gigabit Network Connection
| \-00.1 Intel Corporation 82576 Gigabit Network Connection
+-09.0-[0000:04]--+-00.0 Intel Corporation 82576 Gigabit Network Connection
| \-00.1 Intel Corporation 82576 Gigabit Network Connection
+-13.0 Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller
+-14.0 Intel Corporation 5520/5500/X58 I/O Hub System Management Registers
+-14.1 Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers
+-14.2 Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers
+-14.3 Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers
+-1a.0 Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
+-1a.7 Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
+-1d.0 Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
+-1d.1 Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
+-1d.2 Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
+-1d.7 Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
+-1e.0-[0000:05]----00.0 XGI Technology Inc. (eXtreme Graphics Innovation) Z9s/Z9m (XG21 core)
+-1f.0 Intel Corporation 82801JIB (ICH10) LPC Interface Controller
+-1f.2 Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1
+-1f.3 Intel Corporation 82801JI (ICH10 Family) SMBus Controller
\-1f.5 Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2
euler-linux:/sys/bus/pci/devices/0000:03:00.0 # cat sriov_numvfs
0
euler-linux:/sys/bus/pci/devices/0000:03:00.0 # lspci -vvv -s 03:00.0
03:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
Subsystem: Intel Corporation Gigabit ET Dual Port Server Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
....................[snip].......................
Capabilities: [140] Device Serial Number 0c-da-21-ff-ff-ba-e2-90
Capabilities: [150] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 1
ARICtl: MFVC- ACS-, Function Group: 0
Capabilities: [160] Single Root I/O Virtualization (SR-IOV)
IOVCap: Migration-, Interrupt Message Number: 000
IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
IOVSta: Migration-
Initial VFs: 8, Total VFs: 8, Number of VFs: 7, Function Dependency Link: 00 --------------------->problem: still the old info, should be updated to 0
VF offset: 128, stride: 2, Device ID: 10ca
Supported Page Size: 00000553, System Page Size: 00000001
VF Migration: offset: 00000000, BIR: 1
Kernel driver in use: igb
Kernel modules: igb
euler-linux:/sys/bus/pci/devices/0000:03:00.0 #
Changes in sriov_enable() just avoid device write nr_virtfn to NumVFs register while enable failed.
Changes in sriov_disable() just make sriov update NumVFs properly.
Thanks!
Yijing.
>
>> Signed-off-by: Yijing Wang <wangyijing@...wei.com>
>> ---
>> drivers/pci/iov.c | 4 +++-
>> 1 files changed, 3 insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>> index de8ffac..6e4844b 100644
>> --- a/drivers/pci/iov.c
>> +++ b/drivers/pci/iov.c
>> @@ -286,7 +286,6 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
>> (!(iov->cap & PCI_SRIOV_CAP_VFM) && (nr_virtfn > initial)))
>> return -EINVAL;
>>
>> - pci_write_config_word(dev, iov->pos + PCI_SRIOV_NUM_VF, nr_virtfn);
>> pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_OFFSET, &offset);
>> pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_STRIDE, &stride);
>> if (!offset || (nr_virtfn > 1 && !stride))
>> @@ -334,6 +333,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
>> return rc;
>> }
>>
>> + pci_write_config_word(dev, iov->pos + PCI_SRIOV_NUM_VF, nr_virtfn);
>> iov->ctrl |= PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE;
>> pci_cfg_access_lock(dev);
>> pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
>> @@ -368,6 +368,7 @@ failed:
>> iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
>> pci_cfg_access_lock(dev);
>> pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
>> + pci_write_config_word(dev, iov->pos + PCI_SRIOV_NUM_VF, 0);
>> ssleep(1);
>> pci_cfg_access_unlock(dev);
>>
>> @@ -401,6 +402,7 @@ static void sriov_disable(struct pci_dev *dev)
>> sysfs_remove_link(&dev->dev.kobj, "dep_link");
>>
>> iov->num_VFs = 0;
>> + pci_write_config_word(dev, iov->pos + PCI_SRIOV_NUM_VF, 0);
>> }
>>
>> static int sriov_init(struct pci_dev *dev, int pos)
>> --
>> 1.7.1
>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
>> the body of a message to majordomo@...r.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
--
Thanks!
Yijing
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists