[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1375196394-21138-11-git-send-email-maxime.ripard@free-electrons.com>
Date: Tue, 30 Jul 2013 16:59:54 +0200
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: linux-arm-kernel@...ts.infradead.org
Cc: Emilio Lopez <emilio@...pez.com.ar>, kevin.z.m.zh@...il.com,
sunny@...winnertech.com, shuge@...winnertech.com,
linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com,
Maxime Ripard <maxime.ripard@...e-electrons.com>
Subject: [PATCH 10/10] ARM: sun7i: a20-olinuxino: Enable the user LED
The A20-olinuxino Micro has a LED connected to the PH2 pin. Use the
gpio-led driver to enable the control over this LED.
Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
---
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index 96e8c56..70affa7 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -19,6 +19,15 @@
compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
soc@...20000 {
+ pinctrl@...20800 {
+ led_pins_olinuxino: led_pins@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <1>;
+ allwinner,pull = <0>;
+ };
+ };
+
uart0: serial@...28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
@@ -37,4 +46,16 @@
status = "okay";
};
};
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olinuxino>;
+
+ green {
+ label = "a20s-olinuxino-micro:green:usr";
+ gpios = <&pio 7 2 0>;
+ default-state = "on";
+ };
+ };
};
--
1.8.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists