| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <51F8A4FF.8020803@ti.com>
Date: Wed, 31 Jul 2013 11:17:43 +0530
From: Sekhar Nori <nsekhar@...com>
To: Prabhakar Lad <prabhakar.csengg@...il.com>
CC: DLOS <davinci-linux-open-source@...ux.davincidsp.com>,
LAK <linux-arm-kernel@...ts.infradead.org>,
<devicetree-discuss@...ts.ozlabs.org>,
LKML <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>,
Heiko Schocher <hs@...x.de>
Subject: Re: [PATCH v3 6/6] ARM: davinci: da850: configure system configuration
chip(CFGCHIP3) for emac
On Sunday 23 June 2013 08:30 PM, Prabhakar Lad wrote:
> From: "Lad, Prabhakar" <prabhakar.csengg@...il.com>
>
> This patch makes a common function for to configure emac and calls
> it appropriately in DT and non DT boot mode. The system configuration
> chip CFGCHIP3, controls the emac module. This patch appropriately
> configures this register for emac and sets DA850_MII_MDIO_CLKEN_PIN
> GPIO pin appropriately.
>
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@...il.com>
> Cc: linux-arm-kernel@...ts.infradead.org
> Cc: linux-kernel@...r.kernel.org
> Cc: davinci-linux-open-source@...ux.davincidsp.com
> Cc: netdev@...r.kernel.org
> Cc: devicetree-discuss@...ts.ozlabs.org
> Cc: Sekhar Nori <nsekhar@...com>
> Cc: Heiko Schocher <hs@...x.de>
> ---
> Changes for v2: none
> Changes for v3:
> a> added a common function in da850.c to configure
> the CFGCHIP3 chip.
>
> arch/arm/mach-davinci/board-da850-evm.c | 36 ++--------------------
> arch/arm/mach-davinci/da850.c | 45 ++++++++++++++++++++++++++++
> arch/arm/mach-davinci/da8xx-dt.c | 16 ++++++++++
> arch/arm/mach-davinci/include/mach/da8xx.h | 1 +
> 4 files changed, 64 insertions(+), 34 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
> index 8a24b6c..03dd1df 100644
> --- a/arch/arm/mach-davinci/board-da850-evm.c
> +++ b/arch/arm/mach-davinci/board-da850-evm.c
> @@ -50,7 +50,6 @@
> #include <media/tvp514x.h>
> #include <media/adv7343.h>
>
> -#define DA850_EVM_PHY_ID "davinci_mdio-0:00"
> #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
> #define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15)
>
> @@ -60,8 +59,6 @@
> #define DA850_WLAN_EN GPIO_TO_PIN(6, 9)
> #define DA850_WLAN_IRQ GPIO_TO_PIN(6, 10)
>
> -#define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6)
> -
> static struct mtd_partition da850evm_spiflash_part[] = {
> [0] = {
> .name = "UBL",
> @@ -1033,26 +1030,18 @@ static const short da850_evm_rmii_pins[] = {
>
> static int __init da850_evm_config_emac(void)
> {
> - void __iomem *cfg_chip3_base;
> - int ret;
> - u32 val;
> struct davinci_soc_info *soc_info = &davinci_soc_info;
> u8 rmii_en = soc_info->emac_pdata->rmii_en;
> + int ret;
>
> if (!machine_is_davinci_da850_evm())
> return 0;
>
> - cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
> -
> - val = __raw_readl(cfg_chip3_base);
> -
> if (rmii_en) {
> - val |= BIT(8);
> ret = davinci_cfg_reg_list(da850_evm_rmii_pins);
> pr_info("EMAC: RMII PHY configured, MII PHY will not be"
> " functional\n");
> } else {
> - val &= ~BIT(8);
> ret = davinci_cfg_reg_list(da850_evm_mii_pins);
> pr_info("EMAC: MII PHY configured, RMII PHY will not be"
> " functional\n");
> @@ -1062,28 +1051,7 @@ static int __init da850_evm_config_emac(void)
> pr_warn("%s: CPGMAC/RMII mux setup failed: %d\n",
> __func__, ret);
>
> - /* configure the CFGCHIP3 register for RMII or MII */
> - __raw_writel(val, cfg_chip3_base);
> -
> - ret = davinci_cfg_reg(DA850_GPIO2_6);
> - if (ret)
> - pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__);
> -
> - ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en");
> - if (ret) {
> - pr_warn("Cannot open GPIO %d\n", DA850_MII_MDIO_CLKEN_PIN);
> - return ret;
> - }
> -
> - /* Enable/Disable MII MDIO clock */
> - gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en);
> -
> - soc_info->emac_pdata->phy_id = DA850_EVM_PHY_ID;
> -
> - ret = da8xx_register_emac();
> - if (ret)
> - pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
> -
> + da850_config_emac(0, rmii_en);
> return 0;
> }
> device_initcall(da850_evm_config_emac);
> diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
> index c43abee..d8021bb 100644
> --- a/arch/arm/mach-davinci/da850.c
> +++ b/arch/arm/mach-davinci/da850.c
> @@ -1197,6 +1197,51 @@ no_ddrpll_mem:
> return ret;
> }
>
> +void __init da850_config_emac(u32 dt_mode, u32 rmii_enabled)
> +{
> +#define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6)
> +#define DA850_EVM_PHY_ID "davinci_mdio-0:00"
> +
> + void __iomem *cfg_chip3_base;
> + int ret;
> + u32 val;
> +
> + cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
> +
> + val = readl(cfg_chip3_base);
> +
> + if (rmii_enabled)
> + val |= BIT(8);
> + else
> + val &= ~BIT(8);
> +
> + /* configure the CFGCHIP3 register for RMII or MII */
> + writel(val, cfg_chip3_base);
> +
> + ret = davinci_cfg_reg(DA850_GPIO2_6);
> + if (ret)
> + pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__);
> +
> + ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en");
> + if (ret) {
> + pr_warn("Cannot open GPIO %d\n", DA850_MII_MDIO_CLKEN_PIN);
> + return;
> + }
You cannot do this in SoC specific code. All boards wont use a GPIO to
choose between MII/RMII. You need to do this in a EVM specific manner.
This just means you retain the GPIO part of code in board-da850-evm.c
and for the DT case use a board specific GPIO node. See a similar
example in arch/arm/boot/dts/ste-nomadik-s8815.dts and how the code uses
it in arch/arm/mach-nomadik/cpu-8815.c.
Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists