Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 3.10.4 (x@wheezy64) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Tue Jul 30 23:40:10 CEST 2013 Command line: BOOT_IMAGE=/vmlinuz-3.10.4 root=UUID=13f309fb-9366-45ef-88a5-2f110c74b882 ro quiet rootdelay=8 memory_corruption_check=1 e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000008dbff] usable BIOS-e820: [mem 0x000000000008dc00-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000007dfa5fff] usable BIOS-e820: [mem 0x000000007dfa6000-0x000000007dfe2fff] reserved BIOS-e820: [mem 0x000000007dfe3000-0x000000007e290fff] ACPI NVS BIOS-e820: [mem 0x000000007e291000-0x000000007f36cfff] reserved BIOS-e820: [mem 0x000000007f36d000-0x000000007f7fffff] ACPI NVS BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000107fffffff] usable NX (Execute Disable) protection: active SMBIOS 2.7 present. DMI: Supermicro X9DRi-LN4+/X9DR3-LN4+/X9DRi-LN4+/X9DR3-LN4+, BIOS 2.0 01/11/2013 e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable No AGP bridge found e820: last_pfn = 0x1080000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000000 mask 3FF000000000 write-back 1 base 001000000000 mask 3FFF80000000 write-back 2 base 000080000000 mask 3FFF80000000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled 8 disabled 9 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820: update [mem 0x80000000-0xffffffff] usable ==> reserved e820: last_pfn = 0x7dfa6 max_arch_pfn = 0x400000000 Scanning 1 areas for low memory corruption Base memory trampoline at [ffff880000087000] 87000 size 24576 Using GB pages for direct mapping init_memory_mapping: [mem 0x00000000-0x000fffff] [mem 0x00000000-0x000fffff] page 4k BRK [0x0179a000, 0x0179afff] PGTABLE BRK [0x0179b000, 0x0179bfff] PGTABLE BRK [0x0179c000, 0x0179cfff] PGTABLE init_memory_mapping: [mem 0x107fe00000-0x107fffffff] [mem 0x107fe00000-0x107fffffff] page 1G init_memory_mapping: [mem 0x107c000000-0x107fdfffff] [mem 0x107c000000-0x107fdfffff] page 1G init_memory_mapping: [mem 0x1000000000-0x107bffffff] [mem 0x1000000000-0x107bffffff] page 1G init_memory_mapping: [mem 0x00100000-0x7dfa5fff] [mem 0x00100000-0x001fffff] page 4k [mem 0x00200000-0x7ddfffff] page 2M [mem 0x7de00000-0x7dfa5fff] page 4k init_memory_mapping: [mem 0x100000000-0xfffffffff] [mem 0x100000000-0xfffffffff] page 1G RAMDISK: [mem 0x36bf0000-0x375effff] ACPI: RSDP 00000000000f0490 00024 (v02 SUPERM) ACPI: XSDT 000000007e213090 0009C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) ACPI: FACP 000000007e21c760 000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) ACPI: DSDT 000000007e2131c0 09599 (v02 SUPERM SMCI--MB 00000000 INTL 20121220) ACPI: FACS 000000007e28ef80 00040 ACPI: APIC 000000007e21c858 001B4 (v03 00000001 AMI 00010013) ACPI: FPDT 000000007e21ca10 00044 (v01 00000001 AMI 00010013) ACPI: SRAT 000000007e21ca58 00430 (v01 A M I AMI SRAT 00000001 AMI. 00000000) ACPI: SLIT 000000007e21ce88 00030 (v01 A M I AMI SLIT 00000000 AMI. 00000000) ACPI: HPET 000000007e21ceb8 00038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) ACPI: PRAD 000000007e21cef0 000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) ACPI: SPMI 000000007e21cfb0 00040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) ACPI: SSDT 000000007e21cff0 6B344 (v02 INTEL CpuPm 00004000 INTL 20121220) ACPI: EINJ 000000007e288338 00130 (v01 AMI AMI EINJ 00000000 00000000) ACPI: ERST 000000007e288468 00230 (v01 AMIER AMI ERST 00000000 00000000) ACPI: HEST 000000007e288698 000A8 (v01 AMI AMI HEST 00000000 00000000) ACPI: BERT 000000007e288740 00030 (v01 AMI AMI BERT 00000000 00000000) ACPI: DMAR 000000007e288770 00158 (v01 A M I OEMDMAR 00000001 INTL 00000001) ACPI: MCFG 000000007e2888c8 0003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) ACPI: Local APIC address 0xfee00000 SRAT: PXM 0 -> APIC 0x00 -> Node 0 SRAT: PXM 0 -> APIC 0x01 -> Node 0 SRAT: PXM 0 -> APIC 0x02 -> Node 0 SRAT: PXM 0 -> APIC 0x03 -> Node 0 SRAT: PXM 0 -> APIC 0x04 -> Node 0 SRAT: PXM 0 -> APIC 0x05 -> Node 0 SRAT: PXM 0 -> APIC 0x06 -> Node 0 SRAT: PXM 0 -> APIC 0x07 -> Node 0 SRAT: PXM 0 -> APIC 0x08 -> Node 0 SRAT: PXM 0 -> APIC 0x09 -> Node 0 SRAT: PXM 0 -> APIC 0x0a -> Node 0 SRAT: PXM 0 -> APIC 0x0b -> Node 0 SRAT: PXM 1 -> APIC 0x20 -> Node 1 SRAT: PXM 1 -> APIC 0x21 -> Node 1 SRAT: PXM 1 -> APIC 0x22 -> Node 1 SRAT: PXM 1 -> APIC 0x23 -> Node 1 SRAT: PXM 1 -> APIC 0x24 -> Node 1 SRAT: PXM 1 -> APIC 0x25 -> Node 1 SRAT: PXM 1 -> APIC 0x26 -> Node 1 SRAT: PXM 1 -> APIC 0x27 -> Node 1 SRAT: PXM 1 -> APIC 0x28 -> Node 1 SRAT: PXM 1 -> APIC 0x29 -> Node 1 SRAT: PXM 1 -> APIC 0x2a -> Node 1 SRAT: PXM 1 -> APIC 0x2b -> Node 1 SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] SRAT: Node 0 PXM 0 [mem 0x100000000-0x87fffffff] SRAT: Node 1 PXM 1 [mem 0x880000000-0x107fffffff] NUMA: Initialized distance table, cnt=2 NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x87fffffff] -> [mem 0x00000000-0x87fffffff] Initmem setup node 0 [mem 0x00000000-0x87fffffff] NODE_DATA [mem 0x87fffb000-0x87fffffff] Initmem setup node 1 [mem 0x880000000-0x107fffffff] NODE_DATA [mem 0x107fff8000-0x107fffcfff] [ffffea0000000000-ffffea001dbfffff] PMD -> [ffff88085fe00000-ffff88087bdfffff] on node 0 [ffffea001dc00000-ffffea0039bfffff] PMD -> [ffff88105f600000-ffff88107b5fffff] on node 1 Zone ranges: DMA [mem 0x00001000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal [mem 0x100000000-0x107fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0008cfff] node 0: [mem 0x00100000-0x7dfa5fff] node 0: [mem 0x100000000-0x87fffffff] node 1: [mem 0x880000000-0x107fffffff] On node 0 totalpages: 8380210 DMA zone: 56 pages used for memmap DMA zone: 21 pages reserved DMA zone: 3980 pages, LIFO batch:0 DMA32 zone: 6999 pages used for memmap DMA32 zone: 511910 pages, LIFO batch:31 Normal zone: 107520 pages used for memmap Normal zone: 7864320 pages, LIFO batch:31 On node 1 totalpages: 8388608 Normal zone: 114688 pages used for memmap Normal zone: 8388608 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x20] enabled) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x22] enabled) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x24] enabled) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x26] enabled) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x28] enabled) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x2a] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x21] enabled) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x23] enabled) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x25] enabled) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x27] enabled) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x29] enabled) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x2b] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1]) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24]) IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 ACPI: IOAPIC (id[0x03] address[0xfec40000] gsi_base[48]) IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 smpboot: Allowing 24 CPUs, 0 hotplug CPUs nr_irqs_gsi: 88 PM: Registered nosave memory: 000000000008d000 - 000000000008e000 PM: Registered nosave memory: 000000000008e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 000000007dfa6000 - 000000007dfe3000 PM: Registered nosave memory: 000000007dfe3000 - 000000007e291000 PM: Registered nosave memory: 000000007e291000 - 000000007f36d000 PM: Registered nosave memory: 000000007f36d000 - 000000007f800000 PM: Registered nosave memory: 000000007f800000 - 0000000080000000 PM: Registered nosave memory: 0000000080000000 - 0000000090000000 PM: Registered nosave memory: 0000000090000000 - 00000000fed1c000 PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000 PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000 PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 e820: [mem 0x90000000-0xfed1bfff] available for PCI devices setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:24 nr_node_ids:2 PERCPU: Embedded 27 pages/cpu @ffff88087fc00000 s79744 r8192 d22656 u131072 pcpu-alloc: s79744 r8192 d22656 u131072 alloc=1*2097152 pcpu-alloc: [0] 00 01 02 03 04 05 12 13 14 15 16 17 -- -- -- -- pcpu-alloc: [1] 06 07 08 09 10 11 18 19 20 21 22 23 -- -- -- -- Built 2 zonelists in Zone order, mobility grouping on. Total pages: 16539534 Policy zone: Normal Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.4 root=UUID=13f309fb-9366-45ef-88a5-2f110c74b882 ro quiet rootdelay=8 memory_corruption_check=1 PID hash table entries: 4096 (order: 3, 32768 bytes) xsave: enabled xstate_bv 0x7, cntxt size 0x340 Checking aperture... No AGP bridge found Memory: 66070680k/69206016k available (4131k kernel code, 2130744k absent, 1004592k reserved, 2041k data, 828k init) Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=24. NR_IRQS:4352 nr_irqs:1688 16 Console: colour VGA+ 80x25 console [tty0] enabled Enabling automatic NUMA balancing. Configure with numa_balancing= or sysctl hpet clockevent registered tsc: Fast TSC calibration using PIT tsc: Detected 2294.470 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 4588.94 BogoMIPS (lpj=9177880) pid_max: default: 32768 minimum: 301 Security Framework initialized AppArmor: AppArmor disabled by boot time parameter Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes) Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio Initializing cgroup subsys perf_event CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 18 MCE banks CPU0: Thermal monitoring enabled (TM1) Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 tlb_flushall_shift: 5 Freeing SMP alternatives: 16k freed ACPI: Core revision 20130328 ACPI: All ACPI Tables successfully acquired Switched APIC routing to physical flat. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2630 0 @ 2.30GHz (fam: 06, model: 2d, stepping: 07) TSC deadline timer enabled Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 OK smpboot: Booting Node 1, Processors #6 #7 #8 #9 #10 #11 OK smpboot: Booting Node 0, Processors #12 #13 #14 #15 #16 #17 OK smpboot: Booting Node 1, Processors #18 #19 #20 #21 #22 #23 OK Brought up 24 CPUs smpboot: Total of 24 processors activated (110149.78 BogoMIPS) devtmpfs: initialized PM: Registering ACPI NVS region [mem 0x7dfe3000-0x7e290fff] (2809856 bytes) PM: Registering ACPI NVS region [mem 0x7f36d000-0x7f7fffff] (4796416 bytes) NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type PCI registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 PCI: Using configuration type 1 for base access mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130328/hwxface-568) ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing HEST: Table parsing has been initialized. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: No dock devices found. [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-7e] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df] pci_bus 0000:00: root bus resource [io 0x0d00-0x9fff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff] pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000 pci 0000:00:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400 pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: System wakeup disabled by ACPI pci 0000:00:01.1: [8086:3c03] type 01 class 0x060400 pci 0000:00:01.1: PME# supported from D0 D3hot D3cold pci 0000:00:01.1: System wakeup disabled by ACPI pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400 pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: System wakeup disabled by ACPI pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400 pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: System wakeup disabled by ACPI pci 0000:00:04.0: [8086:3c20] type 00 class 0x088000 pci 0000:00:04.0: reg 10: [mem 0xdfb1c000-0xdfb1ffff 64bit] pci 0000:00:04.1: [8086:3c21] type 00 class 0x088000 pci 0000:00:04.1: reg 10: [mem 0xdfb18000-0xdfb1bfff 64bit] pci 0000:00:04.2: [8086:3c22] type 00 class 0x088000 pci 0000:00:04.2: reg 10: [mem 0xdfb14000-0xdfb17fff 64bit] pci 0000:00:04.3: [8086:3c23] type 00 class 0x088000 pci 0000:00:04.3: reg 10: [mem 0xdfb10000-0xdfb13fff 64bit] pci 0000:00:04.4: [8086:3c24] type 00 class 0x088000 pci 0000:00:04.4: reg 10: [mem 0xdfb0c000-0xdfb0ffff 64bit] pci 0000:00:04.5: [8086:3c25] type 00 class 0x088000 pci 0000:00:04.5: reg 10: [mem 0xdfb08000-0xdfb0bfff 64bit] pci 0000:00:04.6: [8086:3c26] type 00 class 0x088000 pci 0000:00:04.6: reg 10: [mem 0xdfb04000-0xdfb07fff 64bit] pci 0000:00:04.7: [8086:3c27] type 00 class 0x088000 pci 0000:00:04.7: reg 10: [mem 0xdfb00000-0xdfb03fff 64bit] pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000 pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000 pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020 pci 0000:00:05.4: reg 10: [mem 0xdfb25000-0xdfb25fff] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 pci 0000:00:16.0: reg 10: [mem 0xfed0e000-0xfed0e00f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 pci 0000:00:16.1: reg 10: [mem 0xfed0f000-0xfed0f00f 64bit] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 pci 0000:00:1a.0: reg 10: [mem 0xdfb23000-0xdfb233ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: System wakeup disabled by ACPI pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: System wakeup disabled by ACPI pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 pci 0000:00:1d.0: reg 10: [mem 0xdfb22000-0xdfb223ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: System wakeup disabled by ACPI pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 pci 0000:00:1e.0: System wakeup disabled by ACPI pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 pci 0000:00:1f.2: reg 10: [io 0x9050-0x9057] pci 0000:00:1f.2: reg 14: [io 0x9040-0x9043] pci 0000:00:1f.2: reg 18: [io 0x9030-0x9037] pci 0000:00:1f.2: reg 1c: [io 0x9020-0x9023] pci 0000:00:1f.2: reg 20: [io 0x9000-0x901f] pci 0000:00:1f.2: reg 24: [mem 0xdfb21000-0xdfb217ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 pci 0000:00:1f.3: reg 10: [mem 0xdfb20000-0xdfb200ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x1180-0x119f] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 pci 0000:00:1f.6: reg 10: [mem 0xfed08000-0xfed08fff 64bit] pci 0000:01:00.0: [8086:1d74] type 01 class 0x060400 pci 0000:01:00.0: reg 10: [mem 0xdfa00000-0xdfa03fff] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PCI bridge to [bus 01-03] pci 0000:00:01.0: bridge window [io 0x8000-0x8fff] pci 0000:00:01.0: bridge window [mem 0xdfa00000-0xdfafffff] pci 0000:00:01.0: bridge window [mem 0xde000000-0xde8fffff 64bit pref] pci 0000:02:08.0: [8086:1d3f] type 01 class 0x060400 pci 0000:02:08.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PCI bridge to [bus 02-03] pci 0000:01:00.0: bridge window [io 0x8000-0x8fff] pci 0000:01:00.0: bridge window [mem 0xde000000-0xde8fffff 64bit pref] pci 0000:03:00.0: [8086:1d68] type 00 class 0x010700 pci 0000:03:00.0: reg 10: [mem 0xde8f8000-0xde8fffff 64bit pref] pci 0000:03:00.0: reg 18: [mem 0xde000000-0xde7fffff 64bit pref] pci 0000:03:00.0: reg 20: [io 0x8100-0x81ff] pci 0000:03:00.0: reg 24: [io 0x8000-0x80ff] pci 0000:03:00.0: reg 164: [mem 0xde800000-0xde807fff 64bit pref] pci 0000:02:08.0: PCI bridge to [bus 03] pci 0000:02:08.0: bridge window [io 0x8000-0x8fff] pci 0000:02:08.0: bridge window [mem 0xde000000-0xde8fffff 64bit pref] pci 0000:00:01.1: PCI bridge to [bus 04] pci 0000:00:02.0: PCI bridge to [bus 05] pci 0000:00:03.0: PCI bridge to [bus 06] pci 0000:07:00.0: [8086:1521] type 00 class 0x020000 pci 0000:07:00.0: reg 10: [mem 0xdf960000-0xdf97ffff] pci 0000:07:00.0: reg 18: [io 0x7060-0x707f] pci 0000:07:00.0: reg 1c: [mem 0xdf98c000-0xdf98ffff] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold pci 0000:07:00.0: reg 184: [mem 0xdeae0000-0xdeae3fff 64bit pref] pci 0000:07:00.0: reg 190: [mem 0xdeac0000-0xdeac3fff 64bit pref] pci 0000:07:00.0: System wakeup disabled by ACPI pci 0000:07:00.1: [8086:1521] type 00 class 0x020000 pci 0000:07:00.1: reg 10: [mem 0xdf940000-0xdf95ffff] pci 0000:07:00.1: reg 18: [io 0x7040-0x705f] pci 0000:07:00.1: reg 1c: [mem 0xdf988000-0xdf98bfff] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold pci 0000:07:00.1: reg 184: [mem 0xdeaa0000-0xdeaa3fff 64bit pref] pci 0000:07:00.1: reg 190: [mem 0xdea80000-0xdea83fff 64bit pref] pci 0000:07:00.2: [8086:1521] type 00 class 0x020000 pci 0000:07:00.2: reg 10: [mem 0xdf920000-0xdf93ffff] pci 0000:07:00.2: reg 18: [io 0x7020-0x703f] pci 0000:07:00.2: reg 1c: [mem 0xdf984000-0xdf987fff] pci 0000:07:00.2: PME# supported from D0 D3hot D3cold pci 0000:07:00.2: reg 184: [mem 0xdea60000-0xdea63fff 64bit pref] pci 0000:07:00.2: reg 190: [mem 0xdea40000-0xdea43fff 64bit pref] pci 0000:07:00.3: [8086:1521] type 00 class 0x020000 pci 0000:07:00.3: reg 10: [mem 0xdf900000-0xdf91ffff] pci 0000:07:00.3: reg 18: [io 0x7000-0x701f] pci 0000:07:00.3: reg 1c: [mem 0xdf980000-0xdf983fff] pci 0000:07:00.3: PME# supported from D0 D3hot D3cold pci 0000:07:00.3: reg 184: [mem 0xdea20000-0xdea23fff 64bit pref] pci 0000:07:00.3: reg 190: [mem 0xdea00000-0xdea03fff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 07-08] pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff] pci 0000:00:1c.0: bridge window [mem 0xdf900000-0xdf9fffff] pci 0000:00:1c.0: bridge window [mem 0xdea00000-0xdeafffff 64bit pref] pci 0000:09:01.0: [102b:0532] type 00 class 0x030000 pci 0000:09:01.0: reg 10: [mem 0xdd000000-0xddffffff pref] pci 0000:09:01.0: reg 14: [mem 0xdf800000-0xdf803fff] pci 0000:09:01.0: reg 18: [mem 0xdf000000-0xdf7fffff] pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xdf000000-0xdf8fffff] pci 0000:00:1e.0: bridge window [mem 0xdd000000-0xddffffff 64bit pref] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0x9fff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 (pxm 0) acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) acpi PNP0A08:00: ACPI _OSC control (0x11) granted ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f]) PCI host bridge to bus 0000:7f pci_bus 0000:7f: root bus resource [bus 7f] pci 0000:7f:08.0: [8086:3c80] type 00 class 0x088000 pci 0000:7f:08.3: [8086:3c83] type 00 class 0x088000 pci 0000:7f:08.4: [8086:3c84] type 00 class 0x088000 pci 0000:7f:09.0: [8086:3c90] type 00 class 0x088000 pci 0000:7f:09.3: [8086:3c93] type 00 class 0x088000 pci 0000:7f:09.4: [8086:3c94] type 00 class 0x088000 pci 0000:7f:0a.0: [8086:3cc0] type 00 class 0x088000 pci 0000:7f:0a.1: [8086:3cc1] type 00 class 0x088000 pci 0000:7f:0a.2: [8086:3cc2] type 00 class 0x088000 pci 0000:7f:0a.3: [8086:3cd0] type 00 class 0x088000 pci 0000:7f:0b.0: [8086:3ce0] type 00 class 0x088000 pci 0000:7f:0b.3: [8086:3ce3] type 00 class 0x088000 pci 0000:7f:0c.0: [8086:3ce8] type 00 class 0x088000 pci 0000:7f:0c.1: [8086:3ce8] type 00 class 0x088000 pci 0000:7f:0c.2: [8086:3ce8] type 00 class 0x088000 pci 0000:7f:0c.6: [8086:3cf4] type 00 class 0x088000 pci 0000:7f:0c.7: [8086:3cf6] type 00 class 0x088000 pci 0000:7f:0d.0: [8086:3ce8] type 00 class 0x088000 pci 0000:7f:0d.1: [8086:3ce8] type 00 class 0x088000 pci 0000:7f:0d.2: [8086:3ce8] type 00 class 0x088000 pci 0000:7f:0d.6: [8086:3cf5] type 00 class 0x088000 pci 0000:7f:0e.0: [8086:3ca0] type 00 class 0x088000 pci 0000:7f:0e.1: [8086:3c46] type 00 class 0x110100 pci 0000:7f:0f.0: [8086:3ca8] type 00 class 0x088000 pci 0000:7f:0f.1: [8086:3c71] type 00 class 0x088000 pci 0000:7f:0f.2: [8086:3caa] type 00 class 0x088000 pci 0000:7f:0f.3: [8086:3cab] type 00 class 0x088000 pci 0000:7f:0f.4: [8086:3cac] type 00 class 0x088000 pci 0000:7f:0f.5: [8086:3cad] type 00 class 0x088000 pci 0000:7f:0f.6: [8086:3cae] type 00 class 0x088000 pci 0000:7f:10.0: [8086:3cb0] type 00 class 0x088000 pci 0000:7f:10.1: [8086:3cb1] type 00 class 0x088000 pci 0000:7f:10.2: [8086:3cb2] type 00 class 0x088000 pci 0000:7f:10.3: [8086:3cb3] type 00 class 0x088000 pci 0000:7f:10.4: [8086:3cb4] type 00 class 0x088000 pci 0000:7f:10.5: [8086:3cb5] type 00 class 0x088000 pci 0000:7f:10.6: [8086:3cb6] type 00 class 0x088000 pci 0000:7f:10.7: [8086:3cb7] type 00 class 0x088000 pci 0000:7f:11.0: [8086:3cb8] type 00 class 0x088000 pci 0000:7f:13.0: [8086:3ce4] type 00 class 0x088000 pci 0000:7f:13.1: [8086:3c43] type 00 class 0x110100 pci 0000:7f:13.4: [8086:3ce6] type 00 class 0x110100 pci 0000:7f:13.5: [8086:3c44] type 00 class 0x110100 pci 0000:7f:13.6: [8086:3c45] type 00 class 0x088000 acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe]) PCI host bridge to bus 0000:80 pci_bus 0000:80: root bus resource [bus 80-fe] pci_bus 0000:80: root bus resource [io 0xa000-0xffff] pci_bus 0000:80: root bus resource [mem 0xe0000000-0xfbffffff] pci 0000:80:01.0: [8086:3c02] type 01 class 0x060400 pci 0000:80:01.0: PME# supported from D0 D3hot D3cold pci 0000:80:01.0: System wakeup disabled by ACPI pci 0000:80:02.0: [8086:3c04] type 01 class 0x060400 pci 0000:80:02.0: PME# supported from D0 D3hot D3cold pci 0000:80:02.0: System wakeup disabled by ACPI pci 0000:80:03.0: [8086:3c08] type 01 class 0x060400 pci 0000:80:03.0: PME# supported from D0 D3hot D3cold pci 0000:80:03.0: System wakeup disabled by ACPI pci 0000:80:04.0: [8086:3c20] type 00 class 0x088000 pci 0000:80:04.0: reg 10: [mem 0xfbf1c000-0xfbf1ffff 64bit] pci 0000:80:04.1: [8086:3c21] type 00 class 0x088000 pci 0000:80:04.1: reg 10: [mem 0xfbf18000-0xfbf1bfff 64bit] pci 0000:80:04.2: [8086:3c22] type 00 class 0x088000 pci 0000:80:04.2: reg 10: [mem 0xfbf14000-0xfbf17fff 64bit] pci 0000:80:04.3: [8086:3c23] type 00 class 0x088000 pci 0000:80:04.3: reg 10: [mem 0xfbf10000-0xfbf13fff 64bit] pci 0000:80:04.4: [8086:3c24] type 00 class 0x088000 pci 0000:80:04.4: reg 10: [mem 0xfbf0c000-0xfbf0ffff 64bit] pci 0000:80:04.5: [8086:3c25] type 00 class 0x088000 pci 0000:80:04.5: reg 10: [mem 0xfbf08000-0xfbf0bfff 64bit] pci 0000:80:04.6: [8086:3c26] type 00 class 0x088000 pci 0000:80:04.6: reg 10: [mem 0xfbf04000-0xfbf07fff 64bit] pci 0000:80:04.7: [8086:3c27] type 00 class 0x088000 pci 0000:80:04.7: reg 10: [mem 0xfbf00000-0xfbf03fff 64bit] pci 0000:80:05.0: [8086:3c28] type 00 class 0x088000 pci 0000:80:05.2: [8086:3c2a] type 00 class 0x088000 pci 0000:80:05.4: [8086:3c2c] type 00 class 0x080020 pci 0000:80:05.4: reg 10: [mem 0xfbf20000-0xfbf20fff] pci 0000:80:01.0: PCI bridge to [bus 81] pci 0000:80:02.0: PCI bridge to [bus 82] pci 0000:80:03.0: PCI bridge to [bus 83] pci_bus 0000:80: on NUMA node 1 (pxm 1) acpi PNP0A08:01: Requesting ACPI _OSC control (0x1d) acpi PNP0A08:01: ACPI _OSC control (0x11) granted ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff]) PCI host bridge to bus 0000:ff pci_bus 0000:ff: root bus resource [bus ff] pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000 pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000 pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000 pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000 pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000 pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000 pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000 pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000 pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000 pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000 pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000 pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000 pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000 pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000 pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000 pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000 pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000 pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000 pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000 pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000 pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000 pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000 pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100 pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000 pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000 pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000 pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000 pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000 pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000 pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000 pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000 pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000 pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000 pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000 pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000 pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000 pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000 pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000 pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000 pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000 pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100 pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100 pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100 pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000 acpi PNP0A03:01: ACPI _OSC support notification failed, disabling PCIe ASPM acpi PNP0A03:01: Unable to request _OSC control (_OSC support mask: 0x08) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: Enabled 2 GPEs in block 00 to 3F acpi root: \_SB_.PCI0 notify handler is installed acpi root: \_SB_.UNC0 notify handler is installed acpi root: \_SB_.PCI1 notify handler is installed acpi root: \_SB_.UNC1 notify handler is installed Found 4 acpi root devices vgaarb: device added: PCI:0000:09:01.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:09:01.0 SCSI subsystem initialized ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0008dc00-0x0008ffff] e820: reserve RAM buffer [mem 0x7dfa6000-0x7fffffff] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type PNP registered system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) system 00:01: [mem 0xdfffc000-0xdfffdfff] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: [dma 4] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) system 00:05: [io 0x04d0-0x04d1] has been reserved system 00:05: [mem 0x00000400-0x000004ff] could not be reserved system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:08: [io 0x0b00-0x0b7f] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: [dma 0 disabled] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0a: [dma 0 disabled] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0b: Plug and Play ACPI device, IDs IPI0001 (active) system 00:0c: [io 0x0400-0x0453] has been reserved system 00:0c: [io 0x0458-0x047f] has been reserved system 00:0c: [io 0x1180-0x119f] has been reserved system 00:0c: [io 0x0500-0x057f] has been reserved system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:0c: [mem 0xfec00000-0xfecfffff] could not be reserved system 00:0c: [mem 0xff000000-0xffffffff] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) system 00:0d: [io 0x0454-0x0457] has been reserved system 00:0d: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) pnp 00:0e: Plug and Play ACPI device, IDs PNP0103 (active) system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active) system 00:10: [mem 0xfbffe000-0xfbffffff] has been reserved system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:11: [mem 0x00000000-0x0009ffff] could not be reserved system 00:11: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 18 devices ACPI: bus type PNP unregistered pci 0000:02:08.0: PCI bridge to [bus 03] pci 0000:02:08.0: bridge window [io 0x8000-0x8fff] pci 0000:02:08.0: bridge window [mem 0xde000000-0xde8fffff 64bit pref] pci 0000:01:00.0: PCI bridge to [bus 02-03] pci 0000:01:00.0: bridge window [io 0x8000-0x8fff] pci 0000:01:00.0: bridge window [mem 0xde000000-0xde8fffff 64bit pref] pci 0000:00:01.0: PCI bridge to [bus 01-03] pci 0000:00:01.0: bridge window [io 0x8000-0x8fff] pci 0000:00:01.0: bridge window [mem 0xdfa00000-0xdfafffff] pci 0000:00:01.0: bridge window [mem 0xde000000-0xde8fffff 64bit pref] pci 0000:00:01.1: PCI bridge to [bus 04] pci 0000:00:02.0: PCI bridge to [bus 05] pci 0000:00:03.0: PCI bridge to [bus 06] pci 0000:00:1c.0: PCI bridge to [bus 07-08] pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff] pci 0000:00:1c.0: bridge window [mem 0xdf900000-0xdf9fffff] pci 0000:00:1c.0: bridge window [mem 0xdea00000-0xdeafffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 09] pci 0000:00:1e.0: bridge window [mem 0xdf000000-0xdf8fffff] pci 0000:00:1e.0: bridge window [mem 0xdd000000-0xddffffff 64bit pref] pci 0000:80:01.0: PCI bridge to [bus 81] pci 0000:80:02.0: PCI bridge to [bus 82] pci 0000:80:03.0: PCI bridge to [bus 83] pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x03af] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df] pci_bus 0000:00: resource 7 [io 0x0d00-0x9fff] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff] pci_bus 0000:00: resource 10 [mem 0xfed08000-0xfed08fff] pci_bus 0000:00: resource 11 [mem 0xfed0e000-0xfed0ffff] pci_bus 0000:00: resource 12 [mem 0x80000000-0xdfffffff] pci_bus 0000:01: resource 0 [io 0x8000-0x8fff] pci_bus 0000:01: resource 1 [mem 0xdfa00000-0xdfafffff] pci_bus 0000:01: resource 2 [mem 0xde000000-0xde8fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x8000-0x8fff] pci_bus 0000:02: resource 2 [mem 0xde000000-0xde8fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff] pci_bus 0000:03: resource 2 [mem 0xde000000-0xde8fffff 64bit pref] pci_bus 0000:07: resource 0 [io 0x7000-0x7fff] pci_bus 0000:07: resource 1 [mem 0xdf900000-0xdf9fffff] pci_bus 0000:07: resource 2 [mem 0xdea00000-0xdeafffff 64bit pref] pci_bus 0000:09: resource 1 [mem 0xdf000000-0xdf8fffff] pci_bus 0000:09: resource 2 [mem 0xdd000000-0xddffffff 64bit pref] pci_bus 0000:09: resource 4 [io 0x0000-0x03af] pci_bus 0000:09: resource 5 [io 0x03e0-0x0cf7] pci_bus 0000:09: resource 6 [io 0x03b0-0x03df] pci_bus 0000:09: resource 7 [io 0x0d00-0x9fff] pci_bus 0000:09: resource 8 [mem 0x000a0000-0x000bffff] pci_bus 0000:09: resource 9 [mem 0x000c0000-0x000dffff] pci_bus 0000:09: resource 10 [mem 0xfed08000-0xfed08fff] pci_bus 0000:09: resource 11 [mem 0xfed0e000-0xfed0ffff] pci_bus 0000:09: resource 12 [mem 0x80000000-0xdfffffff] pci_bus 0000:80: resource 4 [io 0xa000-0xffff] pci_bus 0000:80: resource 5 [mem 0xe0000000-0xfbffffff] NET: Registered protocol family 2 TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP: reno registered UDP hash table entries: 32768 (order: 8, 1048576 bytes) UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes) NET: Registered protocol family 1 pci 0000:09:01.0: Boot video device PCI: CLS 64 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 10240k freed dmar: Host address width 46 dmar: DRHD base: 0x000000fbffe000 flags: 0x0 dmar: IOMMU 0: reg_base_addr fbffe000 ver 1:0 cap d2078c106f0462 ecap f020fe dmar: DRHD base: 0x000000dfffc000 flags: 0x1 dmar: IOMMU 1: reg_base_addr dfffc000 ver 1:0 cap d2078c106f0462 ecap f020fe dmar: RMRR base: 0x0000007dfb9000 end: 0x0000007dfc5fff dmar: ATSR flags: 0x0 dmar: RHSA base: 0x000000fbffe000 proximity domain: 0x1 dmar: RHSA base: 0x000000dfffc000 proximity domain: 0x0 IOMMU 0 0xfbffe000: using Queued invalidation IOMMU 1 0xdfffc000: using Queued invalidation IOMMU: Setting RMRR: IOMMU: Setting identity map for device 0000:00:1d.0 [0x7dfb9000 - 0x7dfc5fff] IOMMU: Setting identity map for device 0000:00:1a.0 [0x7dfb9000 - 0x7dfc5fff] IOMMU: Prepare 0-16MiB unity mapping for LPC IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1375221412.928:1): initialized bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 32768 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered (default) crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 crc32: self tests passed, processed 225944 bytes in 207988 nsec crc32c: CRC_LE_BITS = 64 crc32c: self tests passed, processed 225944 bytes in 105460 nsec ioapic: probe of 0000:00:05.4 failed with error -22 ioapic: probe of 0000:80:05.4 failed with error -22 intel_idle: MWAIT substates: 0x21120 intel_idle: v0.4 model 0x2D intel_idle: lapic_timer_reliable_states 0xffffffff ERST: Error Record Serialization Table (ERST) support is initialized. GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Linux agpgart interface v0.103 mei_me 0000:00:16.0: Device doesn't have valid ME Interface mei_me 0000:00:16.0: initialization failed. libphy: Fixed MDIO Bus: probed i8042: PNP: No PS/2 controller found. Probing ports directly. tsc: Refined TSC clocksource calibration: 2294.470 MHz Switching to clocksource tsc i8042: No controller found mousedev: PS/2 mouse device common for all mice Intel P-state driver initializing. Intel pstate controlling: cpu 0 Intel pstate controlling: cpu 1 Intel pstate controlling: cpu 2 Intel pstate controlling: cpu 3 Intel pstate controlling: cpu 4 Intel pstate controlling: cpu 5 Intel pstate controlling: cpu 6 Intel pstate controlling: cpu 7 Intel pstate controlling: cpu 8 Intel pstate controlling: cpu 9 Intel pstate controlling: cpu 10 Intel pstate controlling: cpu 11 Intel pstate controlling: cpu 12 Intel pstate controlling: cpu 13 Intel pstate controlling: cpu 14 Intel pstate controlling: cpu 15 Intel pstate controlling: cpu 16 Intel pstate controlling: cpu 17 Intel pstate controlling: cpu 18 Intel pstate controlling: cpu 19 Intel pstate controlling: cpu 20 Intel pstate controlling: cpu 21 Intel pstate controlling: cpu 22 Intel pstate controlling: cpu 23 cpuidle: using governor ladder cpuidle: using governor menu drop_monitor: Initializing network drop monitor service Key type dns_resolver registered registered taskstats version 1 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 828k freed udevd[173]: starting version 175 ACPI: bus type ATA registered libata version 3.00 loaded. pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered dca service started, version 1.12.1 isci: Intel(R) C600 SAS Controller Driver - version 1.1.0 isci 0000:03:00.0: driver configured for rev: 6 silicon isci 0000:03:00.0: OEM parameter table found in OROM isci 0000:03:00.0: OEM SAS parameters (version: 1.0) loaded (platform) igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.3-k igb: Copyright (c) 2007-2013 Intel Corporation. isci 0000:03:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} scsi0 : isci ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: irq 90 for MSI/MSI-X igb 0000:07:00.0: irq 91 for MSI/MSI-X igb 0000:07:00.0: irq 92 for MSI/MSI-X igb 0000:07:00.0: irq 93 for MSI/MSI-X igb 0000:07:00.0: irq 94 for MSI/MSI-X igb 0000:07:00.0: irq 95 for MSI/MSI-X igb 0000:07:00.0: irq 96 for MSI/MSI-X igb 0000:07:00.0: irq 97 for MSI/MSI-X igb 0000:07:00.0: irq 98 for MSI/MSI-X igb 0000:07:00.0: irq 99 for MSI/MSI-X isci 0000:03:00.0: SCU controller 1: phy 3-0 cables: {short, short, short, short} scsi1 : isci isci 0000:03:00.0: irq 100 for MSI/MSI-X isci 0000:03:00.0: irq 101 for MSI/MSI-X isci 0000:03:00.0: irq 102 for MSI/MSI-X isci 0000:03:00.0: irq 103 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst ahci 0000:00:1f.2: setting latency timer to 64 scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci scsi6 : ahci scsi7 : ahci ata1: SATA max UDMA/133 abar m2048@0xdfb21000 port 0xdfb21100 irq 90 ata2: SATA max UDMA/133 abar m2048@0xdfb21000 port 0xdfb21180 irq 90 ata3: SATA max UDMA/133 abar m2048@0xdfb21000 port 0xdfb21200 irq 90 ata4: SATA max UDMA/133 abar m2048@0xdfb21000 port 0xdfb21280 irq 90 ata5: SATA max UDMA/133 abar m2048@0xdfb21000 port 0xdfb21300 irq 90 ata6: SATA max UDMA/133 abar m2048@0xdfb21000 port 0xdfb21380 irq 90 igb 0000:07:00.0: added PHC on eth0 igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection igb 0000:07:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 00:25:90:4f:2c:90 igb 0000:07:00.0: eth0: PBA No: 105900-000 igb 0000:07:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) igb 0000:07:00.1: irq 104 for MSI/MSI-X igb 0000:07:00.1: irq 105 for MSI/MSI-X igb 0000:07:00.1: irq 106 for MSI/MSI-X igb 0000:07:00.1: irq 107 for MSI/MSI-X igb 0000:07:00.1: irq 108 for MSI/MSI-X igb 0000:07:00.1: irq 109 for MSI/MSI-X igb 0000:07:00.1: irq 110 for MSI/MSI-X igb 0000:07:00.1: irq 111 for MSI/MSI-X igb 0000:07:00.1: irq 112 for MSI/MSI-X igb 0000:07:00.1: added PHC on eth1 igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection igb 0000:07:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 00:25:90:4f:2c:91 igb 0000:07:00.1: eth1: PBA No: 105900-000 igb 0000:07:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) igb 0000:07:00.2: irq 113 for MSI/MSI-X igb 0000:07:00.2: irq 114 for MSI/MSI-X igb 0000:07:00.2: irq 115 for MSI/MSI-X igb 0000:07:00.2: irq 116 for MSI/MSI-X igb 0000:07:00.2: irq 117 for MSI/MSI-X igb 0000:07:00.2: irq 118 for MSI/MSI-X igb 0000:07:00.2: irq 119 for MSI/MSI-X igb 0000:07:00.2: irq 120 for MSI/MSI-X igb 0000:07:00.2: irq 121 for MSI/MSI-X igb 0000:07:00.2: added PHC on eth2 igb 0000:07:00.2: Intel(R) Gigabit Ethernet Network Connection igb 0000:07:00.2: eth2: (PCIe:5.0Gb/s:Width x4) 00:25:90:4f:2c:92 igb 0000:07:00.2: eth2: PBA No: 105900-000 igb 0000:07:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) igb 0000:07:00.3: irq 122 for MSI/MSI-X igb 0000:07:00.3: irq 123 for MSI/MSI-X igb 0000:07:00.3: irq 124 for MSI/MSI-X igb 0000:07:00.3: irq 125 for MSI/MSI-X igb 0000:07:00.3: irq 126 for MSI/MSI-X igb 0000:07:00.3: irq 127 for MSI/MSI-X igb 0000:07:00.3: irq 128 for MSI/MSI-X igb 0000:07:00.3: irq 129 for MSI/MSI-X igb 0000:07:00.3: irq 130 for MSI/MSI-X igb 0000:07:00.3: added PHC on eth3 igb 0000:07:00.3: Intel(R) Gigabit Ethernet Network Connection igb 0000:07:00.3: eth3: (PCIe:5.0Gb/s:Width x4) 00:25:90:4f:2c:93 igb 0000:07:00.3: eth3: PBA No: 105900-000 igb 0000:07:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) ata6: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata1.00: ATA-8: ST33000650NS, 0004, max UDMA/133 ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata3.00: ATA-8: ST33000650NS, 0004, max UDMA/133 ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: ATA-8: ST33000650NS, 0004, max UDMA/133 ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata4.00: ATA-8: ST33000650NS, 0004, max UDMA/133 ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata4.00: configured for UDMA/133 ata3.00: configured for UDMA/133 ata2.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA ST33000650NS 0004 PQ: 0 ANSI: 5 scsi 3:0:0:0: Direct-Access ATA ST33000650NS 0004 PQ: 0 ANSI: 5 scsi 4:0:0:0: Direct-Access ATA ST33000650NS 0004 PQ: 0 ANSI: 5 scsi 5:0:0:0: Direct-Access ATA ST33000650NS 0004 PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 3:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 4:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 4:0:0:0: [sdc] Write Protect is off sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:0:0: [sdd] Write Protect is off sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: Attached scsi generic sg0 type 0 sd 3:0:0:0: Attached scsi generic sg1 type 0 sd 4:0:0:0: Attached scsi generic sg2 type 0 sd 5:0:0:0: Attached scsi generic sg3 type 0 sdc: unknown partition table sd 4:0:0:0: [sdc] Attached SCSI disk sdd: unknown partition table sd 5:0:0:0: [sdd] Attached SCSI disk sda: unknown partition table sd 2:0:0:0: [sda] Attached SCSI disk sdb: unknown partition table sd 3:0:0:0: [sdb] Attached SCSI disk sas: phy-0:0 added to port-0:0, phy_mask:0x1 (5000c500596dec11) sas: phy-0:1 added to port-0:1, phy_mask:0x2 (5000c500596fc2e9) sas: phy-0:2 added to port-0:2, phy_mask:0x4 (5000c5005a26e205) sas: phy-0:3 added to port-0:3, phy_mask:0x8 (5000c500597052ad) sas: DOING DISCOVERY on port 0, pid:466 sas: DONE DISCOVERY on port 0, pid:466, result:0 sas: DOING DISCOVERY on port 1, pid:466 sas: DONE DISCOVERY on port 1, pid:466, result:0 sas: DOING DISCOVERY on port 2, pid:466 sas: DONE DISCOVERY on port 2, pid:466, result:0 sas: DOING DISCOVERY on port 3, pid:466 sas: DONE DISCOVERY on port 3, pid:466, result:0 scsi 0:0:0:0: Direct-Access SEAGATE ST3300657SS 0008 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg4 type 0 sd 0:0:0:0: [sde] 585937500 512-byte logical blocks: (300 GB/279 GiB) scsi 0:0:1:0: Direct-Access SEAGATE ST3300657SS 0008 PQ: 0 ANSI: 5 sd 0:0:0:0: [sde] Write Protect is off sd 0:0:0:0: [sde] Mode Sense: bb 00 10 08 sd 0:0:1:0: Attached scsi generic sg5 type 0 sd 0:0:1:0: [sdf] 585937500 512-byte logical blocks: (300 GB/279 GiB) sd 0:0:0:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA scsi 0:0:2:0: Direct-Access SEAGATE ST3300657SS 0008 PQ: 0 ANSI: 5 sd 0:0:1:0: [sdf] Write Protect is off sd 0:0:1:0: [sdf] Mode Sense: bb 00 10 08 sd 0:0:2:0: Attached scsi generic sg6 type 0 sd 0:0:2:0: [sdg] 585937500 512-byte logical blocks: (300 GB/279 GiB) sd 0:0:1:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA scsi 0:0:3:0: Direct-Access SEAGATE ST3300657SS 0008 PQ: 0 ANSI: 5 sd 0:0:3:0: Attached scsi generic sg7 type 0 sd 0:0:2:0: [sdg] Write Protect is off sd 0:0:2:0: [sdg] Mode Sense: bb 00 10 08 sd 0:0:3:0: [sdh] 585937500 512-byte logical blocks: (300 GB/279 GiB) sd 0:0:2:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA sde: sde1 sde2 sde3 sde4 < sde5 > sd 0:0:3:0: [sdh] Write Protect is off sd 0:0:3:0: [sdh] Mode Sense: bb 00 10 08 sd 0:0:3:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 0:0:0:0: [sde] Attached SCSI disk sdf: sdf1 sdf2 sdf3 sdf4 < sdf5 > sdg: sdg1 sdg2 sdg3 sdg4 < sdg5 > sdh: sdh1 sdh2 sdh3 sdh4 < sdh5 > sd 0:0:1:0: [sdf] Attached SCSI disk sd 0:0:2:0: [sdg] Attached SCSI disk sd 0:0:3:0: [sdh] Attached SCSI disk md: md0 stopped. md: bind md: bind md: bind md: bind md: raid1 personality registered for level 1 md/raid1:md0: active with 4 out of 4 mirrors md0: detected capacity change from 0 to 499109888 RAID1 conf printout: --- wd:4 rd:4 disk 0, wo:0, o:1, dev:sdf1 disk 1, wo:0, o:1, dev:sdg1 disk 2, wo:0, o:1, dev:sdh1 disk 3, wo:0, o:1, dev:sde1 md0: unknown partition table md: md127 stopped. md: bind md: bind md: bind md: bind raid6: sse2x1 6257 MB/s raid6: sse2x2 7683 MB/s raid6: sse2x4 8833 MB/s raid6: using algorithm sse2x4 (8833 MB/s) raid6: using ssse3x2 recovery algorithm xor: automatically using best checksumming function: avx : 16910.000 MB/sec async_tx: api initialized (async) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md/raid:md127: device sde2 operational as raid disk 0 md/raid:md127: device sdh2 operational as raid disk 3 md/raid:md127: device sdg2 operational as raid disk 2 md/raid:md127: device sdf2 operational as raid disk 1 md/raid:md127: allocated 4338kB md/raid:md127: raid level 5 active with 4 out of 4 devices, algorithm 2 RAID conf printout: --- level:5 rd:4 wd:4 disk 0, o:1, dev:sde2 disk 1, o:1, dev:sdf2 disk 2, o:1, dev:sdg2 disk 3, o:1, dev:sdh2 md127: detected capacity change from 0 to 89947373568 RAID conf printout: --- level:5 rd:4 wd:4 disk 0, o:1, dev:sde2 disk 1, o:1, dev:sdf2 disk 2, o:1, dev:sdg2 disk 3, o:1, dev:sdh2 md127: unknown partition table md: md1 stopped. md: bind md: bind md: bind md: bind md/raid1:md1: active with 4 out of 4 mirrors md1: detected capacity change from 0 to 24999026688 RAID1 conf printout: --- wd:4 rd:4 disk 0, wo:0, o:1, dev:sdf3 disk 1, wo:0, o:1, dev:sdg3 disk 2, wo:0, o:1, dev:sdh3 disk 3, wo:0, o:1, dev:sde3 md1: unknown partition table md: md126 stopped. md: bind md: bind md: bind md: bind md/raid:md126: device sde5 operational as raid disk 0 md/raid:md126: device sdh5 operational as raid disk 3 md/raid:md126: device sdg5 operational as raid disk 2 md/raid:md126: device sdf5 operational as raid disk 1 md/raid:md126: allocated 4338kB md/raid:md126: raid level 5 active with 4 out of 4 devices, algorithm 2 RAID conf printout: --- level:5 rd:4 wd:4 disk 0, o:1, dev:sde5 disk 1, o:1, dev:sdf5 disk 2, o:1, dev:sdg5 disk 3, o:1, dev:sdh5 md126: detected capacity change from 0 to 733093036032 RAID conf printout: --- level:5 rd:4 wd:4 disk 0, o:1, dev:sde5 disk 1, o:1, dev:sdf5 disk 2, o:1, dev:sdg5 disk 3, o:1, dev:sdh5 md126: unknown partition table md: md125 stopped. md: bind md: bind md: bind md: bind md/raid:md125: device sda operational as raid disk 0 md/raid:md125: device sdd operational as raid disk 3 md/raid:md125: device sdc operational as raid disk 2 md/raid:md125: device sdb operational as raid disk 1 md/raid:md125: allocated 4338kB md/raid:md125: raid level 5 active with 4 out of 4 devices, algorithm 2 RAID conf printout: --- level:5 rd:4 wd:4 disk 0, o:1, dev:sda disk 1, o:1, dev:sdb disk 2, o:1, dev:sdc disk 3, o:1, dev:sdd md125: detected capacity change from 0 to 9001374842880 RAID conf printout: --- level:5 rd:4 wd:4 disk 0, o:1, dev:sda disk 1, o:1, dev:sdb disk 2, o:1, dev:sdc disk 3, o:1, dev:sdd md125: p1 p2 p3 p4 p5 p6 p7 p8 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null) udevd[789]: starting version 175 input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs EDAC MC: Ver: 3.0.0 EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0 EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0 EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0 EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8 EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8 EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8 EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71 EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71 EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71 EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8 EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8 EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8 EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4 EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4 EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4 EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6 EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6 EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6 EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5 EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5 EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5 EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:7f:0e.0 EDAC MC1: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#1': DEV 0000:ff:0e.0 EDAC sbridge: Driver loaded. ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GINV 1 (20130328/utaddress-251) ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 2 (20130328/utaddress-251) ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.HEC2.GPO2 3 (20130328/utaddress-251) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver lpc_ich: Resource conflict(s) found affecting gpio_ich input: PC Speaker as /devices/platform/pcspkr/input/input2 microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x70d ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver wmi: Mapper loaded ehci-pci: EHCI PCI platform driver ehci-pci 0000:00:1a.0: setting latency timer to 64 ehci-pci 0000:00:1a.0: EHCI Host Controller ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:1a.0: debug port 2 ehci-pci 0000:00:1a.0: cache line size of 64 is not supported ehci-pci 0000:00:1a.0: irq 16, io mem 0xdfb23000 ioatdma: Intel(R) QuickData Technology Driver 4.00 ACPI: Requesting acpi_cpufreq ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.10.4 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci-pci 0000:00:1d.0: setting latency timer to 64 ehci-pci 0000:00:1d.0: EHCI Host Controller ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci-pci 0000:00:1d.0: debug port 2 ehci-pci 0000:00:1d.0: cache line size of 64 is not supported ehci-pci 0000:00:1d.0: irq 23, io mem 0xdfb22000 ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 3.10.4 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.0 iTCO_vendor_support: vendor-support=0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ioatdma 0000:00:04.0: irq 131 for MSI/MSI-X iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) igb 0000:07:00.0: DCA enabled igb 0000:07:00.1: DCA enabled ioatdma 0000:00:04.1: irq 132 for MSI/MSI-X igb 0000:07:00.2: DCA enabled igb 0000:07:00.3: DCA enabled ioatdma 0000:00:04.2: irq 133 for MSI/MSI-X ioatdma 0000:00:04.3: irq 134 for MSI/MSI-X ioatdma 0000:00:04.4: irq 135 for MSI/MSI-X ioatdma 0000:00:04.5: irq 136 for MSI/MSI-X ioatdma 0000:00:04.6: irq 137 for MSI/MSI-X ioatdma 0000:00:04.7: irq 138 for MSI/MSI-X ioatdma 0000:80:04.0: irq 139 for MSI/MSI-X ioatdma 0000:80:04.1: irq 140 for MSI/MSI-X ioatdma 0000:80:04.2: irq 141 for MSI/MSI-X ioatdma 0000:80:04.3: irq 142 for MSI/MSI-X ioatdma 0000:80:04.4: irq 143 for MSI/MSI-X ioatdma 0000:80:04.5: irq 144 for MSI/MSI-X ioatdma 0000:80:04.6: irq 145 for MSI/MSI-X ioatdma 0000:80:04.7: irq 146 for MSI/MSI-X microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU8 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU9 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU10 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU12 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU13 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU14 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU15 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU16 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU17 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU18 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU19 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU20 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU21 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU22 sig=0x206d7, pf=0x1, revision=0x70d microcode: CPU23 sig=0x206d7, pf=0x1, revision=0x70d microcode: Microcode Update Driver: v2.00 , Peter Oruba alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) alg: No test for crc32 (crc32-pclmul) usb 1-1: new high-speed USB device number 2 using ehci-pci usb 1-1: New USB device found, idVendor=8087, idProduct=0024 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected usb 2-1: new high-speed USB device number 2 using ehci-pci Adding 87839228k swap on /dev/md127. Priority:10 extents:1 across:87839228k FS EXT4-fs (md1): warning: maximal mount count reached, running e2fsck is recommended EXT4-fs (md1): re-mounted. Opts: errors=remount-ro,acl usb 2-1: New USB device found, idVendor=8087, idProduct=0024 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected loop: module loaded usb 1-1.3: new full-speed USB device number 3 using ehci-pci ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: probing via ACPI ipmi_si 00:0b: [io 0x0ca2] regsize 1 spacing 1 irq 0 ipmi_si: Adding ACPI-specified kcs state machine ipmi_si: probing via SMBIOS ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface ipmi_si: probing via SPMI ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0 ipmi_si: Adding SPMI-specified kcs state machine duplicate interface ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 usb 1-1.3: New USB device found, idVendor=0557, idProduct=2221 usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.3: Product: Hermon USB hidmouse Device usb 1-1.3: Manufacturer: Winbond Electronics Corp ipmi_si 00:0b: Found new BMC (man_id: 0x002a7c, prod_id: 0x0626, dev_id: 0x20) ipmi_si 00:0b: IPMI kcs interface initialized hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input3 hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.3/input0 input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input4 hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.3/input1 8021q: 802.1Q VLAN Support v1.8 usb 2-1.4: new high-speed USB device number 3 using ehci-pci fuse init (API version 7.22) usb 2-1.4: New USB device found, idVendor=13fd, idProduct=2040 usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1.4: Product: USB Mass Storage Device usb 2-1.4: Manufacturer: TSSTcorp usb 2-1.4: SerialNumber: SATAHH0000000051593 usb-storage 2-1.4:1.0: USB Mass Storage device detected scsi8 : usb-storage 2-1.4:1.0 usbcore: registered new interface driver usb-storage bio: create slab at 1 scsi 8:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S224Q TS01 PQ: 0 ANSI: 0 scsi 8:0:0:0: Attached scsi generic sg8 type 5 sr0: scsi3-mmc drive: 32x/40x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 8:0:0:0: Attached scsi CD-ROM sr0 bio: create slab at 2 EXT2-fs (md0): warning: mounting unchecked fs, running e2fsck is recommended EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: errors=remount-ro,acl,user_xattr EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: errors=remount-ro EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: errors=remount-ro,acl,user_xattr EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: errors=remount-ro,acl Bridge firewalling registered device eth1 entered promiscuous mode 8021q: adding VLAN 0 to HW filter on device eth1 device eth0 entered promiscuous mode 8021q: adding VLAN 0 to HW filter on device eth0 8021q: adding VLAN 0 to HW filter on device eth2 device eth2.20 entered promiscuous mode device eth2 entered promiscuous mode device eth2.17 entered promiscuous mode device eth2.50 entered promiscuous mode device eth2.51 entered promiscuous mode device eth2.52 entered promiscuous mode igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX br0: port 1(eth1) entered forwarding state br0: port 1(eth1) entered forwarding state igb: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX br17: port 1(eth2.17) entered forwarding state br17: port 1(eth2.17) entered forwarding state br20: port 1(eth2.20) entered forwarding state br20: port 1(eth2.20) entered forwarding state br50: port 1(eth2.50) entered forwarding state br50: port 1(eth2.50) entered forwarding state br51: port 1(eth2.51) entered forwarding state br51: port 1(eth2.51) entered forwarding state br52: port 1(eth2.52) entered forwarding state br52: port 1(eth2.52) entered forwarding state igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX br10: port 1(eth0) entered forwarding state br10: port 1(eth0) entered forwarding state ip_tables: (C) 2000-2006 Netfilter Core Team cgroup: libvirtd (7379) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.