| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1375340223-3804-1-git-send-email-b.brezillon@overkiz.com>
Date: Thu, 1 Aug 2013 08:57:03 +0200
From: Boris BREZILLON <b.brezillon@...rkiz.com>
To: Nicolas Ferre <nicolas.ferre@...el.com>,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
Ludovic Desroches <ludovic.desroches@...el.com>,
Russell King <linux@....linux.org.uk>,
Andrew Victor <linux@...im.org.za>,
Bo Shen <voice.shen@...el.com>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Boris BREZILLON <b.brezillon@...rkiz.com>
Subject: [PATCH 5/8] ARM: at91/dt: use periph id macros for at91sam9g45 interrupt definitions
This patch make use of the peripheral id macros defined in
dt-bindings/at91/at91sam9g45/peripherals.h to register peripheral
interrupts.
Signed-off-by: Boris BREZILLON <b.brezillon@...rkiz.com>
---
arch/arm/boot/dts/at91sam9g45.dtsi | 57 +++++++++++++------------
arch/arm/mach-at91/include/mach/at91sam9g45.h | 2 +-
2 files changed, 30 insertions(+), 29 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index c3e5148..c709780 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/at91/at91sam9g45/peripherals.h>
/ {
model = "Atmel AT91SAM9G45 family SoC";
@@ -69,7 +70,7 @@
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
- atmel,external-irqs = <31>;
+ atmel,external-irqs = <AT91SAM9G45_ID_IRQ0>;
};
ramc0: ramc@...fe400 {
@@ -91,7 +92,7 @@
pit: timer@...ffd30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupts = <AT91_ID_SYS IRQ_TYPE_LEVEL_HIGH 7>;
};
@@ -103,19 +104,19 @@
tcb0: timer@...7c000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfff7c000 0x100>;
- interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9G45_ID_TCB IRQ_TYPE_LEVEL_HIGH 0>;
};
tcb1: timer@...d4000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfffd4000 0x100>;
- interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9G45_ID_TCB IRQ_TYPE_LEVEL_HIGH 0>;
};
dma: dma-controller@...fec00 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>;
- interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9G45_ID_DMA IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
};
@@ -428,7 +429,7 @@
pioA: gpio@...ff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9G45_ID_PIOA IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -438,7 +439,7 @@
pioB: gpio@...ff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
- interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9G45_ID_PIOB IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -448,7 +449,7 @@
pioC: gpio@...ff600 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x200>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9G45_ID_PIOC IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -458,7 +459,7 @@
pioD: gpio@...ff800 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x200>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9G45_ID_PIODE IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -468,7 +469,7 @@
pioE: gpio@...ffa00 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x200>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9G45_ID_PIODE IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -479,7 +480,7 @@
dbgu: serial@...fee00 {
compatible = "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupts = <AT91_ID_SYS IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled";
@@ -488,7 +489,7 @@
usart0: serial@...8c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff8c000 0x200>;
- interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9G45_ID_US0 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
@@ -499,7 +500,7 @@
usart1: serial@...90000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff90000 0x200>;
- interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9G45_ID_US1 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
@@ -510,7 +511,7 @@
usart2: serial@...94000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff94000 0x200>;
- interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9G45_ID_US2 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
@@ -521,7 +522,7 @@
usart3: serial@...98000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff98000 0x200>;
- interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9G45_ID_US3 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
@@ -532,7 +533,7 @@
macb0: ethernet@...bc000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffbc000 0x100>;
- interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <AT91SAM9G45_ID_EMAC IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
status = "disabled";
@@ -541,7 +542,7 @@
i2c0: i2c@...84000 {
compatible = "atmel,at91sam9g10-i2c";
reg = <0xfff84000 0x100>;
- interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+ interrupts = <AT91SAM9G45_ID_TWI0 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -550,7 +551,7 @@
i2c1: i2c@...88000 {
compatible = "atmel,at91sam9g10-i2c";
reg = <0xfff88000 0x100>;
- interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
+ interrupts = <AT91SAM9G45_ID_TWI1 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -559,7 +560,7 @@
ssc0: ssc@...9c000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xfff9c000 0x4000>;
- interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9G45_ID_SSC0 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
@@ -568,7 +569,7 @@
ssc1: ssc@...a0000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xfffa0000 0x4000>;
- interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9G45_ID_SSC1 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disabled";
@@ -577,7 +578,7 @@
adc0: adc@...b0000 {
compatible = "atmel,at91sam9260-adc";
reg = <0xfffb0000 0x100>;
- interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9G45_ID_TSC IRQ_TYPE_LEVEL_HIGH 0>;
atmel,adc-use-external-triggers;
atmel,adc-channels-used = <0xff>;
atmel,adc-vref = <3300>;
@@ -617,7 +618,7 @@
mmc0: mmc@...80000 {
compatible = "atmel,hsmci";
reg = <0xfff80000 0x600>;
- interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9G45_ID_MCI0 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
#address-cells = <1>;
@@ -628,7 +629,7 @@
mmc1: mmc@...d0000 {
compatible = "atmel,hsmci";
reg = <0xfffd0000 0x600>;
- interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9G45_ID_MCI1 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>;
dma-names = "rxtx";
#address-cells = <1>;
@@ -647,7 +648,7 @@
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xfffa4000 0x200>;
- interrupts = <14 4 3>;
+ interrupts = <AT91SAM9G45_ID_SPI0 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
@@ -658,7 +659,7 @@
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xfffa8000 0x200>;
- interrupts = <15 4 3>;
+ interrupts = <AT91SAM9G45_ID_SPI1 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
@@ -670,7 +671,7 @@
compatible = "atmel,at91sam9rl-udc";
reg = <0x00600000 0x80000
0xfff78000 0x400>;
- interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9G45_ID_UDPHS IRQ_TYPE_LEVEL_HIGH 0>;
status = "disabled";
ep0 {
@@ -748,14 +749,14 @@
usb0: ohci@...00000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00700000 0x100000>;
- interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ interrupts = <AT91SAM9G45_ID_UHPHS IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled";
};
usb1: ehci@...00000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
- interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ interrupts = <AT91SAM9G45_ID_UHPHS IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled";
};
};
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 3f1a509..361fbc3 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -18,7 +18,7 @@
/*
* Peripheral identifiers/interrupts.
*/
-#include <dt-bindings/at91/at91sam9263/peripherals.h>
+#include <dt-bindings/at91/at91sam9g45/peripherals.h>
/*
* User Peripheral physical base addresses.
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists