| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1375400641-1694-2-git-send-email-felipe.contreras@gmail.com>
Date: Thu, 1 Aug 2013 18:43:59 -0500
From: Felipe Contreras <felipe.contreras@...il.com>
To: linux-kernel@...r.kernel.org, linux-acpi@...r.kernel.org
Cc: "Rafael J. Wysocki" <rjw@...k.pl>, Len Brown <lenb@...nel.org>,
Zhang Rui <rui.zhang@...el.com>,
Jiri Kosina <trivial@...nel.org>,
Felipe Contreras <felipe.contreras@...il.com>
Subject: [PATCH 1/3] acpi: video: trivial costmetic cleanups
Signed-off-by: Felipe Contreras <felipe.contreras@...il.com>
---
drivers/acpi/video.c | 114 +++++++++++++++++++++++++++------------------------
1 file changed, 61 insertions(+), 53 deletions(-)
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 0ec434d..f021bf4 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1,5 +1,5 @@
/*
- * video.c - ACPI Video Driver ($Revision:$)
+ * video.c - ACPI Video Driver
*
* Copyright (C) 2004 Luming Yu <luming.yu@...el.com>
* Copyright (C) 2004 Bruno Ducrot <ducrot@...pinou.org>
@@ -118,26 +118,26 @@ struct acpi_video_bus_flags {
};
struct acpi_video_bus_cap {
- u8 _DOS:1; /*Enable/Disable output switching */
- u8 _DOD:1; /*Enumerate all devices attached to display adapter */
- u8 _ROM:1; /*Get ROM Data */
- u8 _GPD:1; /*Get POST Device */
- u8 _SPD:1; /*Set POST Device */
- u8 _VPO:1; /*Video POST Options */
+ u8 _DOS:1; /* Enable/Disable output switching */
+ u8 _DOD:1; /* Enumerate all devices attached to display adapter */
+ u8 _ROM:1; /* Get ROM Data */
+ u8 _GPD:1; /* Get POST Device */
+ u8 _SPD:1; /* Set POST Device */
+ u8 _VPO:1; /* Video POST Options */
u8 reserved:2;
};
struct acpi_video_device_attrib {
u32 display_index:4; /* A zero-based instance of the Display */
- u32 display_port_attachment:4; /*This field differentiates the display type */
- u32 display_type:4; /*Describe the specific type in use */
- u32 vendor_specific:4; /*Chipset Vendor Specific */
- u32 bios_can_detect:1; /*BIOS can detect the device */
- u32 depend_on_vga:1; /*Non-VGA output device whose power is related to
+ u32 display_port_attachment:4; /* This field differentiates the display type */
+ u32 display_type:4; /* Describe the specific type in use */
+ u32 vendor_specific:4; /* Chipset Vendor Specific */
+ u32 bios_can_detect:1; /* BIOS can detect the device */
+ u32 depend_on_vga:1; /* Non-VGA output device whose power is related to
the VGA device. */
- u32 pipe_id:3; /*For VGA multiple-head devices. */
- u32 reserved:10; /*Must be 0 */
- u32 device_id_scheme:1; /*Device ID Scheme */
+ u32 pipe_id:3; /* For VGA multiple-head devices. */
+ u32 reserved:10; /* Must be 0 */
+ u32 device_id_scheme:1; /* Device ID Scheme */
};
struct acpi_video_enumerated_device {
@@ -174,17 +174,17 @@ struct acpi_video_device_flags {
};
struct acpi_video_device_cap {
- u8 _ADR:1; /*Return the unique ID */
- u8 _BCL:1; /*Query list of brightness control levels supported */
- u8 _BCM:1; /*Set the brightness level */
+ u8 _ADR:1; /* Return the unique ID */
+ u8 _BCL:1; /* Query list of brightness control levels supported */
+ u8 _BCM:1; /* Set the brightness level */
u8 _BQC:1; /* Get current brightness level */
u8 _BCQ:1; /* Some buggy BIOS uses _BCQ instead of _BQC */
- u8 _DDC:1; /*Return the EDID for this device */
+ u8 _DDC:1; /* Return the EDID for this device */
};
struct acpi_video_brightness_flags {
u8 _BCL_no_ac_battery_levels:1; /* no AC/Battery levels in _BCL */
- u8 _BCL_reversed:1; /* _BCL package is in a reversed order*/
+ u8 _BCL_reversed:1; /* _BCL package is in a reversed order */
u8 _BCL_use_index:1; /* levels in _BCL are index values */
u8 _BCM_use_index:1; /* input of _BCM is an index value */
u8 _BQC_use_index:1; /* _BQC returns an index value */
@@ -231,7 +231,7 @@ static int acpi_video_get_next_level(struct acpi_video_device *device,
static int acpi_video_switch_brightness(struct acpi_video_device *device,
int event);
-/*backlight device sysfs support*/
+/* backlight device sysfs support */
static int acpi_video_get_brightness(struct backlight_device *bd)
{
unsigned long long cur_level;
@@ -243,8 +243,10 @@ static int acpi_video_get_brightness(struct backlight_device *bd)
return -EINVAL;
for (i = 2; i < vd->brightness->count; i++) {
if (vd->brightness->levels[i] == cur_level)
- /* The first two entries are special - see page 575
- of the ACPI spec 3.0 */
+ /*
+ * The first two entries are special - see page 575
+ * of the ACPI spec 3.0
+ */
return i-2;
}
return 0;
@@ -316,9 +318,11 @@ static const struct thermal_cooling_device_ops video_cooling_ops = {
.set_cur_state = video_set_cur_state,
};
-/* --------------------------------------------------------------------------
- Video Management
- -------------------------------------------------------------------------- */
+/*
+ * --------------------------------------------------------------------------
+ * Video Management
+ * --------------------------------------------------------------------------
+ */
static int
acpi_video_device_lcd_query_levels(struct acpi_video_device *device,
@@ -556,7 +560,8 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
buf));
device->cap._BQC = device->cap._BCQ = 0;
} else {
- /* Fixme:
+ /*
+ * Fixme:
* should we return an error or ignore this failure?
* dev->brightness->curr is a cached value which stores
* the correct current backlight level in most cases.
@@ -615,8 +620,8 @@ acpi_video_device_EDID(struct acpi_video_device *device,
/*
* Arg:
- * video : video bus device pointer
- * bios_flag :
+ * video : video bus device pointer
+ * bios_flag :
* 0. The system BIOS should NOT automatically switch(toggle)
* the active display output.
* 1. The system BIOS should automatically switch (toggle) the
@@ -628,9 +633,9 @@ acpi_video_device_EDID(struct acpi_video_device *device,
* lcd_flag :
* 0. The system BIOS should automatically control the brightness level
* of the LCD when the power changes from AC to DC
- * 1. The system BIOS should NOT automatically control the brightness
+ * 1. The system BIOS should NOT automatically control the brightness
* level of the LCD when the power changes from AC to DC.
- * Return Value:
+ * Return Value:
* -EINVAL wrong arg.
*/
@@ -717,8 +722,8 @@ static int acpi_video_bqc_quirk(struct acpi_video_device *device,
/*
- * Arg:
- * device : video output device (LCD, CRT, ..)
+ * Arg:
+ * device : video output device (LCD, CRT, ..)
*
* Return Value:
* Maximum brightness level
@@ -877,7 +882,7 @@ out:
* device : video output device (LCD, CRT, ..)
*
* Return Value:
- * None
+ * None
*
* Find out all required AML methods defined under the output
* device.
@@ -988,11 +993,11 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
}
/*
- * Arg:
- * device : video output device (VGA)
+ * Arg:
+ * device : video output device (VGA)
*
* Return Value:
- * None
+ * None
*
* Find out all required AML methods defined under the video bus device.
*/
@@ -1039,7 +1044,8 @@ static int acpi_video_bus_check(struct acpi_video_bus *video)
return -ENODEV;
pci_dev_put(dev);
- /* Since there is no HID, CID and so on for VGA driver, we have
+ /*
+ * Since there is no HID, CID and so on for VGA driver, we have
* to check well known required nodes.
*/
@@ -1069,9 +1075,11 @@ static int acpi_video_bus_check(struct acpi_video_bus *video)
return status;
}
-/* --------------------------------------------------------------------------
- Driver Interface
- -------------------------------------------------------------------------- */
+/*
+ * --------------------------------------------------------------------------
+ * Driver Interface
+ * --------------------------------------------------------------------------
+ */
/* device interface */
static struct acpi_video_device_attrib*
@@ -1192,12 +1200,12 @@ acpi_video_bus_get_one_device(struct acpi_device *device,
/*
* Arg:
- * video : video bus device
+ * video : video bus device
*
* Return:
- * none
- *
- * Enumerate the video device list of the video bus,
+ * none
+ *
+ * Enumerate the video device list of the video bus,
* bind the ids with the corresponding video devices
* under the video bus.
*/
@@ -1216,13 +1224,13 @@ static void acpi_video_device_rebind(struct acpi_video_bus *video)
/*
* Arg:
- * video : video bus device
- * device : video output device under the video
- * bus
+ * video : video bus device
+ * device : video output device under the video
+ * bus
*
* Return:
- * none
- *
+ * none
+ *
* Bind the ids with the corresponding video devices
* under the video bus.
*/
@@ -1245,11 +1253,11 @@ acpi_video_device_bind(struct acpi_video_bus *video,
/*
* Arg:
- * video : video bus device
+ * video : video bus device
*
* Return:
- * < 0 : error
- *
+ * < 0 : error
+ *
* Call _DOD to enumerate all devices attached to display adapter
*
*/
--
1.8.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists