linux-kernel - Re: [PATCH 0/4] ARM: dove: DT updates for v3.11-rc2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20130803180328.GB13555@titan.lakedaemon.net>
Date:	Sat, 3 Aug 2013 14:03:28 -0400
From:	Jason Cooper <jason@...edaemon.net>
To:	Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
Cc:	Andrew Lunn <andrew@...n.ch>,
	Russell King <linux@....linux.org.uk>,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 0/4] ARM: dove: DT updates for v3.11-rc2

On Mon, Jul 29, 2013 at 02:29:02PM +0200, Sebastian Hesselbarth wrote:
> This patch set comprises some DT updates and cleanup patches that
> piled up in the past. The first patch adds a cpu node for the
> Marvell Sheeva PJ4(A) CPU found on Dove SoCs. While touching the
> dtsi, also some nodes are renamed to achieve a consitent naming
> scheme. The second patch adds some common pinmux settings to
> the SoC's pinctrl node and moves the default pinctrl properties to
> the corresponding nodes. The third patch adds a node for the
> IR diode connected to a GPIO pin on SolidRun CuBox. Finally,
> the last patch adds an initial DT file for the Globalscale D2Plug
> which is also based on Marvell Dove SoC.
> 
> The whole patch set is based on v3.11-rc2 with DT part of
> mv643xx_eth and irqchip/clocksource patches applied.
> 
> Although this patches are Marvell Dove only, the whole set is also
> sent to devicetree mailing list to raise attention for potential DT
> binding review.
> 
> Sebastian Hesselbarth (4):
>   ARM: dove: add cpu device tree node
>   ARM: dove: add common pinmux functions to DT
>   ARM: dove: add GPIO IR receiver node to SolidRun CuBox
>   ARM: dove: add initial DT file for Globalscale D2Plug
> 
>  arch/arm/boot/dts/Makefile        |    1 +
>  arch/arm/boot/dts/dove-cubox.dts  |   30 ++---
>  arch/arm/boot/dts/dove-d2plug.dts |   69 +++++++++++
>  arch/arm/boot/dts/dove.dtsi       |  235 +++++++++++++++++++++++++++++++++----
>  4 files changed, 295 insertions(+), 40 deletions(-)
>  create mode 100644 arch/arm/boot/dts/dove-d2plug.dts

Whole series applied to mvebu/boards.

thx,

Jason.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/