Message-id: <51FFAA02.50407@samsung.com>
Date:	Mon, 05 Aug 2013 15:34:58 +0200
From:	Marek Szyprowski <m.szyprowski@...sung.com>
To:	Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Cc:	Cho KyongHo <pullip.cho@...sung.com>,
	'Linux ARM Kernel' <linux-arm-kernel@...ts.infradead.org>,
	'Linux IOMMU' <iommu@...ts.linux-foundation.org>,
	'Linux Kernel' <linux-kernel@...r.kernel.org>,
	'Linux Samsung SOC' <linux-samsung-soc@...r.kernel.org>,
	'Hyunwoong Kim' <khw0178.kim@...sung.com>,
	'Joerg Roedel' <joro@...tes.org>,
	'Kukjin Kim' <kgene.kim@...sung.com>,
	'Prathyush' <prathyush.k@...sung.com>,
	'Rahul Sharma' <rahul.sharma@...sung.com>,
	'Subash Patel' <supash.ramaswamy@...aro.org>,
	'Keyyoung Park' <keyyoung.park@...sung.com>,
	'Grant Grundler' <grundler@...omium.org>,
	'Antonios Motakis' <a.motakis@...tualopensystems.com>,
	kvmarm@...ts.cs.columbia.edu,
	'Sachin Kamat' <sachin.kamat@...aro.org>
Subject: Re: [PATCH v8 06/12] ARM: dts: Add description of System MMU of Exynos
 SoCs

Hello,

On 8/5/2013 3:09 PM, Bartlomiej Zolnierkiewicz wrote:
> On Monday, August 05, 2013 08:16:40 PM Cho KyongHo wrote:
> > > -----Original Message-----
> > > From: Bartlomiej Zolnierkiewicz [mailto:b.zolnierkie@...sung.com]
> > > Sent: Saturday, August 03, 2013 2:14 AM
> > >
> > > Hi,
> > >
> > > On Friday, July 26, 2013 08:28:19 PM Cho KyongHo wrote:
> > > > Signed-off-by: Cho KyongHo <pullip.cho@...sung.com>
> > > > ---
> > > >  .../bindings/iommu/samsung,exynos4210-sysmmu.txt   |  103 +++++++
> > > >  arch/arm/boot/dts/exynos4.dtsi                     |  122 ++++++++
> > > >  arch/arm/boot/dts/exynos4210.dtsi                  |   25 ++
> > > >  arch/arm/boot/dts/exynos4x12.dtsi                  |   76 +++++
> > > >  arch/arm/boot/dts/exynos5250.dtsi                  |  291 ++++++++++++++++++++
> > > >  5 files changed, 617 insertions(+), 0 deletions(-)
> > > >  create mode 100644 Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.txt
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.txt
> > > > b/Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.txt
> > > > new file mode 100644
> > > > index 0000000..92f0a33
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.txt
> > > > @@ -0,0 +1,103 @@
> > > > +Samsung Exynos4210 IOMMU H/W, System MMU (System Memory Management Unit)
> > > > +
> > > > +Samsung's Exynos architecture contains System MMU that enables scattered
> > > > +physical memory chunks visible as a contiguous region to DMA-capable peripheral
> > > > +devices like MFC, FIMC, FIMD, GScaler, FIMC-IS and so forth.
> > > > +
> > > > +System MMU is a sort of IOMMU and support identical translation table format to
> > > > +ARMv7 translation tables with minimum set of page properties including access
> > > > +permissions, shareability and security protection. In addition, System MMU has
> > > > +another capabilities like L2 TLB or block-fetch buffers to minimize translation
> > > > +latency.
> > > > +
> > > > +A System MMU is dedicated to a single master peripheral device.  Thus, it is
> > > > +important to specify the correct System MMU in the device node of its master
> > > > +device. Whereas a System MMU is dedicated to a master device, the master device
> > > > +may have more than one System MMU.
> > > > +
> > > > +Required properties:
> > > > +- compatible: Should be "samsung,exynos4210-sysmmu"
> > > > +- reg: A tuple of base address and size of System MMU registers.
> > > > +- interrupt-parent: The phandle of the interrupt controller of System MMU
> > > > +- interrupts: A tuple of numbers that indicates the interrupt source.
> > > > +- clock-names: Should be "sysmmu" if the System MMU is needed to gate its clock.
> > > > +               Please refer to the following documents:
> > > > +	       Documentation/devicetree/bindings/clock/clock-bindings.txt
> > > > +	       Documentation/devicetree/bindings/clock/exynos4-clock.txt
> > > > +	       Documentation/devicetree/bindings/clock/exynos5250-clock.txt
> > > > +	       Optional "master" if the clock to the System MMU is gated by
> > > > +	       another gate clock other than "sysmmu". The System MMU driver
> > > > +	       sets "master" the parent of "sysmmu".
> > > > +	       Exynos4 SoCs, there needs no "master" clocks.
> > > > +	       Exynos5 SoCs, some System MMUs must have "master" clocks.
> > > > +- clocks: Required if the System MMU is needed to gate its clock.
> > > > +	  Please refer to the documents listed above.
> > > > +- samsung,power-domain: Required if the System MMU is needed to gate its power.
> > > > +	  Please refer to the following document:
> > > > +	  Documentation/devicetree/bindings/arm/exynos/power_domain.txt
> > > > +
> > > > +Required properties for the master peripheral devices:
> > > > +- iommu: phandles to the System MMUs of the device
> > > > +
> > > > +Examples:
> > > > +A System MMU is dedicated to a single master device.
> > > > +	gsc_0:  gsc@...3e00000 {
> > > > +		compatible = "samsung,exynos5-gsc";
> > > > +		reg = <0x13e00000 0x1000>;
> > > > +		interrupts = <0 85 0>;
> > > > +		samsung,power-domain = <&pd_gsc>;
> > > > +		clocks = <&clock 256>;
> > > > +		clock-names = "gscl";
> > > > +		iommu = <&sysmmu_gsc1>;
> > > > +	};
> > > > +
> > > > +	sysmmu_gsc0: sysmmu@...80000 {
> > > > +		compatible = "samsung,exynos4210-sysmmu";
> > > > +		reg = <0x13E80000 0x1000>;
> > > > +		interrupt-parent = <&combiner>;
> > > > +		interrupt-names = "sysmmu-gsc0";
> > > > +		interrupts = <2 0>;
> > > > +		clock-names = "sysmmu", "master";
> > > > +		clocks = <&clock 262>, <&clock 256>;
> > > > +		samsung,power-domain = <&pd_gsc>;
> > > > +		status = "ok";
> > > > +	};
> > > > +
> > > > +MFC has 2 System MMUs for each port that MFC is attached. Thus it seems natural
> > > > +to define 2 System MMUs for each port of the MFC:
> > >
> > > Marek Szyprowski (added to cc:) has a patch fixing MFC to create separate
> > > mfc_l and mfc_r devices (like it was in the past). Using this patch it
> > > would be possible to bind sysmmu_mfc_l to mfc_l device and sysmmu_mfc_r to
> > > mfc_r device. This probably also requires adding some MFC specific handling
> > > in a device tree node and to the new master's device PM ops (in patch #10)
> > > as previously (in our trees) sysmmu_mfc r device was set as parent of
> > > sysmmu_mfc_l device which in turn was a parent for main MFC device (to make
> > > runtime Power Management work). However because MFC is the only device
> > > requiring use of multiple System MMUs above changes would allow us (unless
> > > I'm missing something?) to use just one System MMU device per struct
> > > exynos_iommu_client instance (making driver a lot simpler).
> > >
> >
> > Does it mean that we can make the exynos-iommu driver simpler
> > with Marek Szyprowski's patch?
>
> I think so and you probably need to change MFC handling anyway because
> MFC driver does DMA allocations per mfc_l/mfc_r devices and not per main
> device (at least in the upstream kernels).
>
> [ Marek, could you please resfresh and post your patch on the list? ]

My proposal for cleaning up MFC's bindings is available here:

http://thread.gmane.org/gmane.linux.kernel.samsung-soc/21536/

> BTW There is an additional problem with combining System MMU devices per
> one main device - it limits available address space (which in case of MFC
> is very limited by hardware design).
>
> > It is welcome but I don't think it covers all topologies of System MMU and
> > master H/W. Those are getting more complex.
>
> Could you please be more specific? I know about FIMC ISP subsystem but
> it doesn't require combining System MMUs. Are there any other examples of
> complex System MMU + master H/W topologies?
>
> Anyway I think that System MMUs should not be combined (as it is done in
> patch #10) and should be binded per "memport" devices and not per main
> device (as done in this patch).

Best regards
-- 
Marek Szyprowski
Samsung R&D Institute Poland


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists