linux-kernel - [PATCH v3 3/5] devicetree: create a separate binding description for sata

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1375890758-30265-3-git-send-email-mark.langsdorf@calxeda.com>
Date:	Wed,  7 Aug 2013 10:52:36 -0500
From:	Mark Langsdorf <mark.langsdorf@...xeda.com>
To:	linux-kernel@...r.kernel.org, linux-ide@...r.kernel.org,
	tj@...nel.org, devicetree@...r.kernel.org, pawel.moll@....com,
	mark.rutland@....com, swarren@...dotorg.org,
	ian.campbell@...rix.com, rob.herring@...xeda.com,
	sergei.shtylyov@...entembedded.com
Cc:	Mark Langsdorf <mark.langsdorf@...xeda.com>
Subject: [PATCH v3 3/5] devicetree: create a separate binding description for sata_highbank

The Calxeda sata_highbank driver has been adding its descriptions to the
ahci driver. Separate them properly.

Signed-off-by: Mark Langsdorf <mark.langsdorf@...xeda.com>
Acked-by: Rob Herring <rob.herring@...xeda.com>
---
Changes from v2
	Fixed some indenting.
Changes from v1
	None.

 .../devicetree/bindings/ata/ahci-platform.txt      | 18 +++---------
 .../devicetree/bindings/ata/sata_highbank.txt      | 32 ++++++++++++++++++++++
 2 files changed, 36 insertions(+), 14 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/ata/sata_highbank.txt

diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index 3ec0c5c..89de156 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -4,27 +4,17 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
 Each SATA controller should have its own node.
 
 Required properties:
-- compatible        : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci"
+- compatible        : compatible list, contains "snps,spear-ahci"
 - interrupts        : <interrupt mapping for SATA IRQ>
 - reg               : <registers mapping>
 
 Optional properties:
-- calxeda,port-phys: phandle-combophy and lane assignment, which maps each
-			SATA port to a combophy and a lane within that
-			combophy
-- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
-			which indicates that the driver supports SGPIO
-			indicator lights using the indicated GPIOs
-- calxeda,led-order : a u32 array that map port numbers to offsets within the
-			SGPIO bitstream.
 - dma-coherent      : Present if dma operations are coherent
 
 Example:
         sata@...08000 {
-		compatible = "calxeda,hb-ahci";
-                reg = <0xffe08000 0x1000>;
-                interrupts = <115>;
-		calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1
-					&combophy0 2 &combophy0 3>;
+		compatible = "snps,spear-ahci";
+		reg = <0xffe08000 0x1000>;
+		interrupts = <115>;
 
         };
diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.txt b/Documentation/devicetree/bindings/ata/sata_highbank.txt
new file mode 100644
index 0000000..1ac6d3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/sata_highbank.txt
@@ -0,0 +1,32 @@
+* Calxeda AHCI SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+The Calxeda SATA controller mostly conforms to the AHCI interface
+with some special extensions to add functionality.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible        : compatible list, contains "calxeda,hb-ahci"
+- interrupts        : <interrupt mapping for SATA IRQ>
+- reg               : <registers mapping>
+
+Optional properties:
+- dma-coherent      : Present if dma operations are coherent
+- calxeda,port-phys: phandle-combophy and lane assignment, which maps each
+			SATA port to a combophy and a lane within that
+			combophy
+- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
+			which indicates that the driver supports SGPIO
+			indicator lights using the indicated GPIOs
+- calxeda,led-order : a u32 array that map port numbers to offsets within the
+			SGPIO bitstream.
+
+Example:
+        sata@...08000 {
+		compatible = "calxeda,hb-ahci";
+		reg = <0xffe08000 0x1000>;
+		interrupts = <115>;
+		calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1
+					&combophy0 2 &combophy0 3>;
+
+        };
-- 
1.8.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/