[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20130807171606.5348.76732@quantum>
Date: Wed, 07 Aug 2013 10:16:06 -0700
From: Mike Turquette <mturquette@...aro.org>
To: Yadwinder Singh Brar <yadi.brar@...sung.com>,
linux-kernel@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org, sbkim73@...sung.com,
sameo@...ux.intel.com, lee.jones@...aro.org, broonie@...nel.org,
yadi.brar01@...il.com, Yadwinder Singh Brar <yadi.brar@...sung.com>
Subject: Re: [PATCH 2/3] mfd: sec: Add clock cell for s2mps11
Quoting Yadwinder Singh Brar (2013-07-07 04:44:21)
> This patch adds clock to list of mfd cells for s2mps11 and DT documentation
> for clock part.
>
> Signed-off-by: Yadwinder Singh Brar <yadi.brar@...sung.com>
Reviewed-by: Mike Turquette <mturquette@...aro.org>
> ---
> Documentation/devicetree/bindings/mfd/s2mps11.txt | 20 ++++++++++++++++++++
> drivers/mfd/sec-core.c | 4 +++-
> 2 files changed, 23 insertions(+), 1 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
> index 36269c4..e41dd16 100644
> --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
> +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
> @@ -16,6 +16,21 @@ Optional properties:
> - interrupts: Interrupt specifiers for interrupt sources.
>
> Optional nodes:
> +- clocks: s2mps11 provides three(AP/CP/BT) buffered 32.768 KHz outputs, so to
> + register these as clocks with common clock framework instantiate a sub-node
> + named "clocks". It uses the common clock binding documented in :
> + [Documentation/devicetree/bindings/clock/clock-bindings.txt]
> + - #clock-cells: should be 1.
> +
> + - The following is the list of clocks generated by the controller. Each clock
> + is assigned an identifier and client nodes use this identifier to specify
> + the clock which they consume.
> + Clock ID
> + ----------------------
> + 32KhzAP 0
> + 32KhzCP 1
> + 32KhzBT 2
> +
> - regulators: The regulators of s2mps11 that have to be instantiated should be
> included in a sub-node named 'regulators'. Regulator nodes included in this
> sub-node should be of the format as listed below.
> @@ -55,6 +70,11 @@ Example:
> compatible = "samsung,s2mps11-pmic";
> reg = <0x66>;
>
> + s2m_osc: clocks{
> + #clock-cells = 1;
> + clock-output-names = "xx", "yy", "zz";
> + };
> +
> regulators {
> ldo1_reg: LDO1 {
> regulator-name = "VDD_ABB_3.3V";
> diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
> index 760da8a..eaee5ec 100644
> --- a/drivers/mfd/sec-core.c
> +++ b/drivers/mfd/sec-core.c
> @@ -58,7 +58,9 @@ static struct mfd_cell s5m8767_devs[] = {
> static struct mfd_cell s2mps11_devs[] = {
> {
> .name = "s2mps11-pmic",
> - },
> + }, {
> + .name = "s2mps11-clk",
> + }
> };
>
> #ifdef CONFIG_OF
> --
> 1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists