[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20130810221232.GD18039@flip3.engr.oregonstate.edu>
Date: Sat, 10 Aug 2013 15:12:32 -0700
From: Kevin Strasser <strassek@...r.orst.edu>
To: Michael Brunner <mibru@....de>
Cc: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Guenter Roeck <linux@...ck-us.net>,
Darren Hart <dvhart@...ux.intel.com>,
Samuel Ortiz <sameo@...ux.intel.com>,
Chris Healy <chealy@...co-us.com>,
Linus Walleij <linus.walleij@...aro.org>,
linux-gpio@...r.kernel.org
Subject: Re: [PATCH] gpio: Fix bit masking in Kontron PLD GPIO driver
On Fri, Aug 09, 2013 at 05:33:26PM +0200, Michael Brunner wrote:
> This patch fixes the bit masking within the GPIO driver. The masking is
> basically done twice which causes the wrong GPIOs to be addressed.
>
> Signed-off-by: Michael Brunner <michael.brunner@...tron.com>
Acked-by: Kevin Strasser <strassek@...r.orst.edu>
> ---
> drivers/gpio/gpio-kempld.c | 24 +++++++++---------------
> 1 file changed, 9 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpio/gpio-kempld.c b/drivers/gpio/gpio-kempld.c
> index d3ed563..6118b66 100644
> --- a/drivers/gpio/gpio-kempld.c
> +++ b/drivers/gpio/gpio-kempld.c
> @@ -46,9 +46,9 @@ static void kempld_gpio_bitop(struct kempld_device_data *pld,
>
> status = kempld_read8(pld, reg);
> if (val)
> - status |= (1 << bit);
> + status |= KEMPLD_GPIO_MASK(bit);
> else
> - status &= ~(1 << bit);
> + status &= ~KEMPLD_GPIO_MASK(bit);
> kempld_write8(pld, reg, status);
> }
>
> @@ -60,7 +60,7 @@ static int kempld_gpio_get_bit(struct kempld_device_data *pld, u8 reg, u8 bit)
> status = kempld_read8(pld, reg);
> kempld_release_mutex(pld);
>
> - return !!(status & (1 << bit));
> + return !!(status & KEMPLD_GPIO_MASK(bit));
> }
>
> static int kempld_gpio_get(struct gpio_chip *chip, unsigned offset)
> @@ -69,8 +69,7 @@ static int kempld_gpio_get(struct gpio_chip *chip, unsigned offset)
> = container_of(chip, struct kempld_gpio_data, chip);
> struct kempld_device_data *pld = gpio->pld;
>
> - return kempld_gpio_get_bit(pld, KEMPLD_GPIO_LVL_NUM(offset),
> - KEMPLD_GPIO_MASK(offset));
> + return kempld_gpio_get_bit(pld, KEMPLD_GPIO_LVL_NUM(offset), offset);
> }
>
> static void kempld_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
> @@ -80,8 +79,7 @@ static void kempld_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
> struct kempld_device_data *pld = gpio->pld;
>
> kempld_get_mutex(pld);
> - kempld_gpio_bitop(pld, KEMPLD_GPIO_LVL_NUM(offset),
> - KEMPLD_GPIO_MASK(offset), value);
> + kempld_gpio_bitop(pld, KEMPLD_GPIO_LVL_NUM(offset), offset, value);
> kempld_release_mutex(pld);
> }
>
> @@ -92,8 +90,7 @@ static int kempld_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
> struct kempld_device_data *pld = gpio->pld;
>
> kempld_get_mutex(pld);
> - kempld_gpio_bitop(pld, KEMPLD_GPIO_DIR_NUM(offset),
> - KEMPLD_GPIO_MASK(offset), 0);
> + kempld_gpio_bitop(pld, KEMPLD_GPIO_DIR_NUM(offset), offset, 0);
> kempld_release_mutex(pld);
>
> return 0;
> @@ -107,10 +104,8 @@ static int kempld_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
> struct kempld_device_data *pld = gpio->pld;
>
> kempld_get_mutex(pld);
> - kempld_gpio_bitop(pld, KEMPLD_GPIO_LVL_NUM(offset),
> - KEMPLD_GPIO_MASK(offset), value);
> - kempld_gpio_bitop(pld, KEMPLD_GPIO_DIR_NUM(offset),
> - KEMPLD_GPIO_MASK(offset), 1);
> + kempld_gpio_bitop(pld, KEMPLD_GPIO_LVL_NUM(offset), offset, value);
> + kempld_gpio_bitop(pld, KEMPLD_GPIO_DIR_NUM(offset), offset, 1);
> kempld_release_mutex(pld);
>
> return 0;
> @@ -122,8 +117,7 @@ static int kempld_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
> = container_of(chip, struct kempld_gpio_data, chip);
> struct kempld_device_data *pld = gpio->pld;
>
> - return kempld_gpio_get_bit(pld, KEMPLD_GPIO_DIR_NUM(offset),
> - KEMPLD_GPIO_MASK(offset));
> + return kempld_gpio_get_bit(pld, KEMPLD_GPIO_DIR_NUM(offset), offset);
> }
>
> static int kempld_gpio_pincount(struct kempld_device_data *pld)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists