| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1376379225-10604-4-git-send-email-ldewangan@nvidia.com>
Date: Tue, 13 Aug 2013 13:03:45 +0530
From: Laxman Dewangan <ldewangan@...dia.com>
To: <broonie@...nel.org>, <sameo@...ux.intel.com>
CC: <rob.herring@...xeda.com>, <pawel.moll@....com>,
<mark.rutland@....com>, <rob@...dley.net>, <lee.jones@...aro.org>,
<grant.likely@...aro.org>, <devicetree@...r.kernel.org>,
<linux-doc@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<gg@...mlogic.co.uk>, <kishon@...com>, <j-keerthy@...com>,
<ian.campbell@...rix.com>, <swarren@...dotorg.org>,
Laxman Dewangan <ldewangan@...dia.com>
Subject: [PATCH 3/3] regulator: palmas: add support for external control of rails
Palmas rails like LDOs, SMPSs, REGENs, SYSENs can be enable and disable
by register programming through I2C communication as well as it can be
enable/disable with the external control input ENABLE1, ENABLE2 and NSLEEP.
Add support for configuring these rails to be controlled by external control
inputs. This is require to configure the rail's control register as well as
configuration of resource register.
Provide the external input names through parameter "roof-floor". Updated the
DT binding document to details different value of the roof-floor.
Signed-off-by: Laxman Dewangan <ldewangan@...dia.com>
---
.../devicetree/bindings/regulator/palmas-pmic.txt | 8 +-
drivers/regulator/palmas-regulator.c | 139 +++++++++++++++++++-
2 files changed, 139 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
index 794d13d..845c776 100644
--- a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
+++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
@@ -30,7 +30,11 @@ Optional nodes:
Optional sub-node properties:
ti,warm-reset - maintain voltage during warm reset(boolean)
- ti,roof-floor - control voltage selection by pin(boolean)
+ ti,roof-floor - control voltage selection by pin. If the
+ external pin is:
+ ENABLE1 then 0x1,
+ ENABLE2 then 0x2 or
+ NSLEEP then 0x4.
ti,mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - auto,
2 - eco, 3 - forced pwm
ti,smps-range - OTP has the wrong range set for the hardware so override
@@ -56,7 +60,7 @@ pmic {
regulator-always-on;
regulator-boot-on;
ti,warm-reset;
- ti,roof-floor;
+ ti,roof-floor = 0x1; /* ENABLE1 control */
ti,mode-sleep = <0>;
ti,smps-range = <1>;
};
diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 488dfe7..e57deee 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -33,6 +33,7 @@ struct regs_info {
u8 vsel_addr;
u8 ctrl_addr;
u8 tstep_addr;
+ int sleep_id;
};
static const struct regs_info palmas_regs_info[] = {
@@ -42,6 +43,7 @@ static const struct regs_info palmas_regs_info[] = {
.vsel_addr = PALMAS_SMPS12_VOLTAGE,
.ctrl_addr = PALMAS_SMPS12_CTRL,
.tstep_addr = PALMAS_SMPS12_TSTEP,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS12,
},
{
.name = "SMPS123",
@@ -49,12 +51,14 @@ static const struct regs_info palmas_regs_info[] = {
.vsel_addr = PALMAS_SMPS12_VOLTAGE,
.ctrl_addr = PALMAS_SMPS12_CTRL,
.tstep_addr = PALMAS_SMPS12_TSTEP,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS12,
},
{
.name = "SMPS3",
.sname = "smps3-in",
.vsel_addr = PALMAS_SMPS3_VOLTAGE,
.ctrl_addr = PALMAS_SMPS3_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS3,
},
{
.name = "SMPS45",
@@ -62,6 +66,7 @@ static const struct regs_info palmas_regs_info[] = {
.vsel_addr = PALMAS_SMPS45_VOLTAGE,
.ctrl_addr = PALMAS_SMPS45_CTRL,
.tstep_addr = PALMAS_SMPS45_TSTEP,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS45,
},
{
.name = "SMPS457",
@@ -69,6 +74,7 @@ static const struct regs_info palmas_regs_info[] = {
.vsel_addr = PALMAS_SMPS45_VOLTAGE,
.ctrl_addr = PALMAS_SMPS45_CTRL,
.tstep_addr = PALMAS_SMPS45_TSTEP,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS45,
},
{
.name = "SMPS6",
@@ -76,12 +82,14 @@ static const struct regs_info palmas_regs_info[] = {
.vsel_addr = PALMAS_SMPS6_VOLTAGE,
.ctrl_addr = PALMAS_SMPS6_CTRL,
.tstep_addr = PALMAS_SMPS6_TSTEP,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS6,
},
{
.name = "SMPS7",
.sname = "smps7-in",
.vsel_addr = PALMAS_SMPS7_VOLTAGE,
.ctrl_addr = PALMAS_SMPS7_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS7,
},
{
.name = "SMPS8",
@@ -89,108 +97,128 @@ static const struct regs_info palmas_regs_info[] = {
.vsel_addr = PALMAS_SMPS8_VOLTAGE,
.ctrl_addr = PALMAS_SMPS8_CTRL,
.tstep_addr = PALMAS_SMPS8_TSTEP,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS8,
},
{
.name = "SMPS9",
.sname = "smps9-in",
.vsel_addr = PALMAS_SMPS9_VOLTAGE,
.ctrl_addr = PALMAS_SMPS9_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS9,
},
{
.name = "SMPS10_OUT2",
.sname = "smps10-in",
.ctrl_addr = PALMAS_SMPS10_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS10,
},
{
.name = "SMPS10_OUT1",
.sname = "smps10-out2",
.ctrl_addr = PALMAS_SMPS10_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS10,
},
{
.name = "LDO1",
.sname = "ldo1-in",
.vsel_addr = PALMAS_LDO1_VOLTAGE,
.ctrl_addr = PALMAS_LDO1_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO1,
},
{
.name = "LDO2",
.sname = "ldo2-in",
.vsel_addr = PALMAS_LDO2_VOLTAGE,
.ctrl_addr = PALMAS_LDO2_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO2,
},
{
.name = "LDO3",
.sname = "ldo3-in",
.vsel_addr = PALMAS_LDO3_VOLTAGE,
.ctrl_addr = PALMAS_LDO3_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO3,
},
{
.name = "LDO4",
.sname = "ldo4-in",
.vsel_addr = PALMAS_LDO4_VOLTAGE,
.ctrl_addr = PALMAS_LDO4_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO4,
},
{
.name = "LDO5",
.sname = "ldo5-in",
.vsel_addr = PALMAS_LDO5_VOLTAGE,
.ctrl_addr = PALMAS_LDO5_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO5,
},
{
.name = "LDO6",
.sname = "ldo6-in",
.vsel_addr = PALMAS_LDO6_VOLTAGE,
.ctrl_addr = PALMAS_LDO6_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO6,
},
{
.name = "LDO7",
.sname = "ldo7-in",
.vsel_addr = PALMAS_LDO7_VOLTAGE,
.ctrl_addr = PALMAS_LDO7_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO7,
},
{
.name = "LDO8",
.sname = "ldo8-in",
.vsel_addr = PALMAS_LDO8_VOLTAGE,
.ctrl_addr = PALMAS_LDO8_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO8,
},
{
.name = "LDO9",
.sname = "ldo9-in",
.vsel_addr = PALMAS_LDO9_VOLTAGE,
.ctrl_addr = PALMAS_LDO9_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO9,
},
{
.name = "LDOLN",
.sname = "ldoln-in",
.vsel_addr = PALMAS_LDOLN_VOLTAGE,
.ctrl_addr = PALMAS_LDOLN_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDOLN,
},
{
.name = "LDOUSB",
.sname = "ldousb-in",
.vsel_addr = PALMAS_LDOUSB_VOLTAGE,
.ctrl_addr = PALMAS_LDOUSB_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDOUSB,
},
{
.name = "REGEN1",
.ctrl_addr = PALMAS_REGEN1_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_REGEN1,
},
{
.name = "REGEN2",
.ctrl_addr = PALMAS_REGEN2_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_REGEN2,
},
{
.name = "REGEN3",
.ctrl_addr = PALMAS_REGEN3_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_REGEN3,
},
{
.name = "SYSEN1",
.ctrl_addr = PALMAS_SYSEN1_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SYSEN1,
},
{
.name = "SYSEN2",
.ctrl_addr = PALMAS_SYSEN2_CTRL,
+ .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SYSEN2,
},
};
@@ -484,6 +512,17 @@ static struct regulator_ops palmas_ops_smps = {
.set_ramp_delay = palmas_smps_set_ramp_delay,
};
+static struct regulator_ops palmas_ops_ext_control_smps = {
+ .set_mode = palmas_set_mode_smps,
+ .get_mode = palmas_get_mode_smps,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .list_voltage = palmas_list_voltage_smps,
+ .map_voltage = palmas_map_voltage_smps,
+ .set_voltage_time_sel = palma_smps_set_voltage_smps_time_sel,
+ .set_ramp_delay = palmas_smps_set_ramp_delay,
+};
+
static struct regulator_ops palmas_ops_smps10 = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
@@ -519,12 +558,37 @@ static struct regulator_ops palmas_ops_ldo = {
.map_voltage = regulator_map_voltage_linear,
};
+static struct regulator_ops palmas_ops_ext_control_ldo = {
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+};
+
static struct regulator_ops palmas_ops_extreg = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
};
+static struct regulator_ops palmas_ops_ext_control_extreg = {
+};
+
+static int palams_regulator_config_external(struct palmas *palmas, int id,
+ struct palmas_reg_init *reg_init)
+{
+ int sleep_id = palmas_regs_info[id].sleep_id;
+ int ret;
+
+ ret = palmas_ext_control_req_config(palmas, sleep_id,
+ reg_init->roof_floor, true);
+ if (ret < 0)
+ dev_err(palmas->dev,
+ "Ext control config for regulator %d failed %d\n",
+ id, ret);
+ return ret;
+}
+
/*
* setup the hardware based sleep configuration of the SMPS/LDO regulators
* from the platform data. This is different to the software based control
@@ -583,7 +647,22 @@ static int palmas_smps_init(struct palmas *palmas, int id,
return ret;
}
+ if (reg_init->roof_floor && (id != PALMAS_REG_SMPS10_OUT1) &&
+ (id != PALMAS_REG_SMPS10_OUT2)) {
+ /* Enable externally controlled regulator */
+ addr = palmas_regs_info[id].ctrl_addr;
+ ret = palmas_smps_read(palmas, addr, ®);
+ if (ret < 0)
+ return ret;
+ if (!(reg & PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK)) {
+ reg |= SMPS_CTRL_MODE_ON;
+ ret = palmas_smps_write(palmas, addr, reg);
+ if (ret < 0)
+ return ret;
+ }
+ return palams_regulator_config_external(palmas, id, reg_init);
+ }
return 0;
}
@@ -614,6 +693,20 @@ static int palmas_ldo_init(struct palmas *palmas, int id,
if (ret)
return ret;
+ if (reg_init->roof_floor) {
+ /* Enable externally controlled regulator */
+ addr = palmas_regs_info[id].ctrl_addr;
+ ret = palmas_update_bits(palmas, PALMAS_LDO_BASE,
+ addr, PALMAS_LDO1_CTRL_MODE_ACTIVE,
+ PALMAS_LDO1_CTRL_MODE_ACTIVE);
+ if (ret < 0) {
+ dev_err(palmas->dev,
+ "LDO Register 0x%02x update failed %d\n",
+ addr, ret);
+ return ret;
+ }
+ return palams_regulator_config_external(palmas, id, reg_init);
+ }
return 0;
}
@@ -636,6 +729,21 @@ static int palmas_extreg_init(struct palmas *palmas, int id,
addr, ret);
return ret;
}
+
+ if (reg_init->roof_floor) {
+ /* Enable externally controlled regulator */
+ addr = palmas_regs_info[id].ctrl_addr;
+ ret = palmas_update_bits(palmas, PALMAS_RESOURCE_BASE,
+ addr, PALMAS_REGEN1_CTRL_MODE_ACTIVE,
+ PALMAS_REGEN1_CTRL_MODE_ACTIVE);
+ if (ret < 0) {
+ dev_err(palmas->dev,
+ "Resource Register 0x%02x update failed %d\n",
+ addr, ret);
+ return ret;
+ }
+ return palams_regulator_config_external(palmas, id, reg_init);
+ }
return 0;
}
@@ -746,9 +854,10 @@ static void palmas_dt_to_pdata(struct device *dev,
of_property_read_bool(palmas_matches[idx].of_node,
"ti,warm-reset");
- pdata->reg_init[idx]->roof_floor =
- of_property_read_bool(palmas_matches[idx].of_node,
- "ti,roof-floor");
+ ret = of_property_read_u32(palmas_matches[idx].of_node,
+ "ti,roof-floor", &prop);
+ if (!ret)
+ pdata->reg_init[idx]->roof_floor = prop;
ret = of_property_read_u32(palmas_matches[idx].of_node,
"ti,mode-sleep", &prop);
@@ -875,6 +984,8 @@ static int palmas_regulators_probe(struct platform_device *pdev)
ret = palmas_smps_init(palmas, id, reg_init);
if (ret)
goto err_unregister_regulator;
+ } else {
+ reg_init = NULL;
}
/* Register the regulators */
@@ -919,7 +1030,11 @@ static int palmas_regulators_probe(struct platform_device *pdev)
if (reg & PALMAS_SMPS12_VOLTAGE_RANGE)
pmic->range[id] = 1;
- pmic->desc[id].ops = &palmas_ops_smps;
+ if (reg_init && reg_init->roof_floor)
+ pmic->desc[id].ops =
+ &palmas_ops_ext_control_smps;
+ else
+ pmic->desc[id].ops = &palmas_ops_smps;
pmic->desc[id].n_voltages = PALMAS_SMPS_NUM_VOLTAGES;
pmic->desc[id].vsel_reg =
PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
@@ -962,6 +1077,10 @@ static int palmas_regulators_probe(struct platform_device *pdev)
/* Start this loop from the id left from previous loop */
for (; id < PALMAS_NUM_REGS; id++) {
+ if (pdata && pdata->reg_init[id])
+ reg_init = pdata->reg_init[id];
+ else
+ reg_init = NULL;
/* Miss out regulators which are not available due
* to alternate functions.
@@ -975,7 +1094,11 @@ static int palmas_regulators_probe(struct platform_device *pdev)
if (id < PALMAS_REG_REGEN1) {
pmic->desc[id].n_voltages = PALMAS_LDO_NUM_VOLTAGES;
- pmic->desc[id].ops = &palmas_ops_ldo;
+ if (reg_init && reg_init->roof_floor)
+ pmic->desc[id].ops =
+ &palmas_ops_ext_control_ldo;
+ else
+ pmic->desc[id].ops = &palmas_ops_ldo;
pmic->desc[id].min_uV = 900000;
pmic->desc[id].uV_step = 50000;
pmic->desc[id].linear_min_sel = 1;
@@ -999,7 +1122,11 @@ static int palmas_regulators_probe(struct platform_device *pdev)
}
} else {
pmic->desc[id].n_voltages = 1;
- pmic->desc[id].ops = &palmas_ops_extreg;
+ if (reg_init && reg_init->roof_floor)
+ pmic->desc[id].ops =
+ &palmas_ops_ext_control_extreg;
+ else
+ pmic->desc[id].ops = &palmas_ops_extreg;
pmic->desc[id].enable_reg =
PALMAS_BASE_TO_REG(PALMAS_RESOURCE_BASE,
palmas_regs_info[id].ctrl_addr);
--
1.7.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists