| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAGH3drr2p5dD4SXxG67QChVH1wubRCDKWaQPevQKBxej-UqsBA@mail.gmail.com>
Date: Tue, 13 Aug 2013 14:22:52 +0300
From: Oleksandr Kravchenko <o.v.kravchenko@...ballogic.com>
To: Peter Meerwald <pmeerw@...erw.net>
Cc: linux-kernel@...r.kernel.org, linux-iio@...r.kernel.org,
jic23@....ac.uk, Lars-Peter Clausen <lars@...afoo.de>
Subject: Re: [PATCH v2] iio: add Bosch BMA180 acceleration sensor driver
On Tue, Aug 13, 2013 at 1:01 PM, Peter Meerwald <pmeerw@...erw.net> wrote:
>
>> This patch adds IIO driver for Bosch BMA180 triaxial
>> acceleration sensor.
>> http://omapworld.com/BMA180_111_1002839.pdf
>
> the DS is preliminary, more up-to-date version available
>
> comments inline
>
>> ---
>> .../devicetree/bindings/iio/accel/bma180.txt | 35 ++
>> drivers/iio/accel/Kconfig | 12 +
>> drivers/iio/accel/Makefile | 2 +
>> drivers/iio/accel/bma180.c | 635 ++++++++++++++++++++
>> 4 files changed, 684 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/iio/accel/bma180.txt
>> create mode 100644 drivers/iio/accel/bma180.c
>>
>> diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt
>> new file mode 100644
>> index 0000000..e08780b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/accel/bma180.txt
>> @@ -0,0 +1,35 @@
>> +* Bosch BMA180 triaxial acceleration sensor
>> +
>> +http://omapworld.com/BMA180_111_1002839.pdf
>> +
>> +Required properties:
>> +
>> + - compatible : should be "bosch,bma180"
>> + - reg : the I2C address of the sensor
>> +
>> +Optional properties:
>> +
>> + - interrupt-parent : should be the phandle for the interrupt controller
>> +
>> + - interrupts : interrupt mapping for GPIO IRQ, it should by configured with
>> + flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING
>> +
>> + - bosch,resolution : ADC resolution. Must be 130, 190, 250, 380, 500,
>> + 990 or 1980 mcg/LSB only
>
> what is mcg?
mcg is microgram (http://en.wikipedia.org/wiki/Kilogram#SI_multiples)
How to call it more correctly?
>
>> +
>> + - bosch,bandwidth : select bandwidth frequency. Must be 10, 20, 40, 75,
>> + 150 or 300 Hz only
>> +
>> + - bosch,mode : 0 - select low noise mode, 1 - select low power mode
>> +
>> +Example:
>> +
>> +bma180@40 {
>> + compatible = "bosch,bma180";
>> + reg = <0x40>;
>> + interrupt-parent = <&gpio6>;
>> + interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
>> + bosch,bandwidth = <300>;
>> + bosch,resolution = <250>;
>> + bosch,mode = <0>;
>> +};
>> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
>> index 719d83f..bd9d581 100644
>> --- a/drivers/iio/accel/Kconfig
>> +++ b/drivers/iio/accel/Kconfig
>> @@ -3,6 +3,18 @@
>> #
>> menu "Accelerometers"
>>
>> +config BMA180
>> + tristate "Bosch BMA180 3-Axis Accelerometer Driver"
>> + depends on I2C
>> + select IIO_BUFFER
>> + select IIO_TRIGGERED_BUFFER
>> + help
>> + Say Y here if you want to build a driver for the Bosch BMA180
>> + triaxial acceleration sensor.
>> +
>> + To compile this driver as a module, choose M here: the
>> + module will be called bma180.
>> +
>> config HID_SENSOR_ACCEL_3D
>> depends on HID_SENSOR_HUB
>> select IIO_BUFFER
>> diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
>> index 87d8fa2..eb09d72 100644
>> --- a/drivers/iio/accel/Makefile
>> +++ b/drivers/iio/accel/Makefile
>> @@ -2,6 +2,8 @@
>> # Makefile for industrial I/O accelerometer drivers
>> #
>>
>> +obj-$(CONFIG_BMA180) += bma180.o
>> +
>> obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
>>
>> obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel.o
>> diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
>> new file mode 100644
>> index 0000000..61ffe31
>> --- /dev/null
>> +++ b/drivers/iio/accel/bma180.c
>> @@ -0,0 +1,635 @@
>> +/*
>> + * bma180.c - IIO driver for Bosch BMA180 triaxial acceleration sensor
>> + *
>> + * Copyright 2013 Oleksandr Kravchenko <x0199363@...com>
>> + *
>> + * This file is subject to the terms and conditions of version 2 of
>> + * the GNU General Public License. See the file COPYING in the main
>> + * directory of this archive for more details.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/i2c.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/delay.h>
>> +#include <linux/of.h>
>> +#include <linux/bitops.h>
>> +#include <linux/slab.h>
>> +#include <linux/iio/iio.h>
>> +#include <linux/iio/sysfs.h>
>> +#include <linux/iio/buffer.h>
>> +#include <linux/iio/trigger.h>
>> +#include <linux/iio/trigger_consumer.h>
>> +#include <linux/iio/triggered_buffer.h>
>> +
>> +#define BMA180_DRV_NAME "bma180"
>> +#define BMA180_IRQ_NAME "bma180_event"
>> +
>> +/* Register set */
>> +#define BMA180_CHIP_ID 0x00 /* Need to distinguish BMA180 from other */
>> +#define BMA180_ACC_X_LSB 0x02 /* First of 6 registers of accel data */
>> +#define BMA180_CTRL_REG0 0x0d
>> +#define BMA180_RESET 0x10
>> +#define BMA180_BW_TCS 0x20
>> +#define BMA180_CTRL_REG3 0x21
>> +#define BMA180_TCO_Z 0x30
>> +#define BMA180_OFFSET_LSB1 0x35
>> +
>> +/* BMA180_CTRL_REG0 bits */
>> +#define BMA180_DIS_WAKE_UP BIT(0) /* Disable wake up mode */
>> +#define BMA180_SLEEP BIT(1) /* 1 - chip will sleep */
>> +#define BMA180_EE_W BIT(4) /* Unlock writing to addr from 0x20 */
>> +#define BMA180_RESET_INT BIT(6) /* Reset pending interrupts */
>> +
>> +/* BMA180_CTRL_REG3 bits */
>> +#define BMA180_NEW_DATA_INT BIT(1) /* Intr every new accel data is ready */
>> +
>> +/* BMA180_OFFSET_LSB1 skipping mode bit */
>> +#define BMA180_SMP_SKIP BIT(0)
>> +
>> +/* Bit masks for registers bit fields */
>> +#define BMA180_RANGE 0x0e /* Range of measured accel values*/
>> +#define BMA180_BW 0xf0 /* Accel bandwidth */
>> +#define BMA180_MODE_CONFIG 0x03 /* Config operation modes */
>> +
>> +/* We have to write this value in reset register to do soft reset */
>> +#define BMA180_RESET_VAL 0xb6
>> +
>> +/* Chip operation modes */
>> +#define BMA180_LOW_NOISE 0x00
>> +#define BMA180_LOW_POWER 0x03
>> +
>> +/* Default config values. Will use if doesn't exist in devtree */
>> +#define BMA180_DEF_BW 20
>> +#define BMA180_DEF_SCALE 250
>> +
>> +/* Available values */
>> +#define BMA180_BW_AVAILABLE "10 20 40 75 150 300"
>> +#define BMA180_SCALE_AVAILABLE \
>> + "0.000130 0.000190 0.000250 0.000380 0.000500 0.000990 0.001980"
>> +
>> +struct bma180_data {
>> + struct i2c_client *client;
>> + struct iio_trigger *trig;
>> + struct mutex mutex;
>> + int sleep_state;
>> + int scale;
>> + int bw;
>> + int mode;
>> + char *buff;
>> +};
>> +
>> +enum bma180_axis {
>> + AXIS_X,
>> + AXIS_Y,
>> + AXIS_Z,
>> +};
>> +
>> +static int bw_table[] = { 10, 20, 40, 75, 150, 300 }; /* Hz */
>> +static int scale_table[] = { 130, 190, 250, 380, 500, 990, 1980 }; /* mcg/LSB */
>
> mcg?
>
>> +
>> +static int bma180_get_acc_reg(struct bma180_data *data, enum bma180_axis axis)
>> +{
>> + u8 reg = BMA180_ACC_X_LSB + axis * 2;
>> + int ret;
>> +
>> + if (data->sleep_state)
>> + return -EBUSY;
>> +
>> + ret = i2c_smbus_read_word_data(data->client, reg);
>> + if (ret < 0)
>> + dev_err(&data->client->dev,
>> + "failed to read accel_%c registers\n", 'x' + axis);
>> +
>> + return ret;
>> +}
>> +
>> +static int bma180_set_bits(struct bma180_data *data, u8 reg, u8 mask, u8 val)
>> +{
>> + int ret = i2c_smbus_read_byte_data(data->client, reg);
>> + u8 reg_val = (ret & ~mask) | (val << (ffs(mask) - 1));
>> +
>> + if (ret < 0)
>> + return ret;
>> +
>> + return i2c_smbus_write_byte_data(data->client, reg, reg_val);
>> +}
>> +
>> +static int bma180_reset_intr(struct bma180_data *data)
>> +{
>> + int ret = bma180_set_bits(data, BMA180_CTRL_REG0, BMA180_RESET_INT, 1);
>> +
>> + if (ret)
>> + dev_err(&data->client->dev, "failed to reset interrupt\n");
>> +
>> + return ret;
>> +}
>> +
>> +static int bma180_set_new_data_intr_state(struct bma180_data *data, int state)
>> +{
>> + u8 reg_val = state ? BMA180_NEW_DATA_INT : 0x00;
>> + int ret = i2c_smbus_write_byte_data(data->client, BMA180_CTRL_REG3,
>> + reg_val);
>> +
>> + if (ret)
>> + goto err;
>> + ret = bma180_reset_intr(data);
>> + if (ret)
>> + goto err;
>> +
>> + return 0;
>> +
>> +err:
>> + dev_err(&data->client->dev,
>> + "failed to set new data interrupt state %d\n", state);
>> + return ret;
>> +}
>> +
>> +static int bma180_set_sleep_state(struct bma180_data *data, int state)
>> +{
>> + int ret = bma180_set_bits(data, BMA180_CTRL_REG0, BMA180_SLEEP, state);
>> +
>> + if (ret) {
>> + dev_err(&data->client->dev,
>> + "failed to set sleep state %d\n", state);
>> + return ret;
>> + }
>> + data->sleep_state = state;
>> +
>> + return 0;
>> +}
>> +
>> +static int bma180_set_ee_writing_state(struct bma180_data *data, int state)
>> +{
>> + int ret = bma180_set_bits(data, BMA180_CTRL_REG0, BMA180_EE_W, state);
>> +
>> + if (ret)
>> + dev_err(&data->client->dev,
>> + "failed to set ee writing state %d\n", state);
>> +
>> + return ret;
>> +}
>> +
>> +static int bma180_set_bw(struct bma180_data *data, int val)
>> +{
>> + int ret, i;
>> +
>> + if (data->sleep_state)
>> + return -EBUSY;
>> +
>> + for (i = 0; i < ARRAY_SIZE(bw_table); ++i) {
>> + if (bw_table[i] == val) {
>> + ret = bma180_set_bits(data,
>> + BMA180_BW_TCS, BMA180_BW, i);
>> + if (ret) {
>> + dev_err(&data->client->dev,
>> + "failed to set bandwidth\n");
>> + return ret;
>> + }
>> + data->bw = val;
>> + return 0;
>> + }
>> + }
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static int bma180_set_scale(struct bma180_data *data, int val)
>> +{
>> + int ret, i;
>> +
>> + if (data->sleep_state)
>> + return -EBUSY;
>> +
>> + for (i = 0; i < ARRAY_SIZE(scale_table); ++i)
>> + if (scale_table[i] == val) {
>> + ret = bma180_set_bits(data,
>> + BMA180_OFFSET_LSB1, BMA180_RANGE, i);
>> + if (ret) {
>> + dev_err(&data->client->dev,
>> + "failed to set scale\n");
>> + return ret;
>> + }
>> + data->scale = val;
>> + return 0;
>> + }
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static int bma180_soft_reset(struct bma180_data *data)
>> +{
>> + int ret = i2c_smbus_write_byte_data(data->client,
>> + BMA180_RESET, BMA180_RESET_VAL);
>> +
>> + if (ret)
>> + dev_err(&data->client->dev, "failed to reset the chip\n");
>> +
>> + return ret;
>> +}
>> +
>> +static int bma180_chip_init(struct bma180_data *data)
>> +{
>> + /* Try to read chip_id register. It must return 0x03. */
>> + int ret = i2c_smbus_read_byte_data(data->client, BMA180_CHIP_ID);
>> +
>> + if (ret < 0)
>> + goto err;
>> + if (ret != 0x03) {
>
> use some #defined MAGIC
>
>> + ret = -ENODEV;
>> + goto err;
>> + }
>> +
>> + ret = bma180_soft_reset(data);
>> + if (ret)
>> + goto err;
>> + /*
>> + * No serial transaction should occur within minimum 10 us
>> + * after soft_reset command
>> + */
>> + msleep(20);
>> +
>> + ret = bma180_set_bits(data, BMA180_CTRL_REG0, BMA180_DIS_WAKE_UP, 1);
>> + if (ret)
>> + goto err;
>> + ret = bma180_set_ee_writing_state(data, 1);
>> + if (ret)
>> + goto err;
>> + ret = bma180_set_new_data_intr_state(data, 0);
>> + if (ret)
>> + goto err;
>> + ret = bma180_set_bw(data, data->bw);
>> + if (ret)
>> + goto err;
>> + ret = bma180_set_scale(data, data->scale);
>> + if (ret)
>> + goto err;
>> + ret = bma180_set_bits(data, BMA180_TCO_Z, BMA180_MODE_CONFIG,
>> + data->mode ? BMA180_LOW_POWER : BMA180_LOW_NOISE);
>> + if (ret)
>> + goto err;
>> + ret = bma180_set_bits(data, BMA180_OFFSET_LSB1, BMA180_SMP_SKIP, 1);
>> + if (ret)
>> + goto err;
>> +
>> + return 0;
>> +
>> +err:
>> + dev_err(&data->client->dev, "failed to init the chip\n");
>> + return ret;
>> +}
>> +
>> +static void bma180_chip_disable(struct bma180_data *data)
>> +{
>> + if (bma180_set_new_data_intr_state(data, 0))
>> + goto err;
>> + if (bma180_set_ee_writing_state(data, 0))
>> + goto err;
>> + if (bma180_set_sleep_state(data, 1))
>> + goto err;
>> +
>> + return;
>> +
>> +err:
>> + dev_err(&data->client->dev, "failed to disable the chip\n");
>> +}
>> +
>> +static ssize_t bma180_read_bw_config(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
>> + struct bma180_data *data = iio_priv(indio_dev);
>> +
>> + return sprintf(buf, "%d\n", data->bw);
>> +}
>> +
>> +static ssize_t bma180_write_bw_config(struct device *dev,
>> + struct device_attribute *attr, const char *buf, size_t len)
>> +{
>> + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
>> + struct bma180_data *data = iio_priv(indio_dev);
>> + long val;
>> + int ret = kstrtol(buf, 10, &val);
>> +
>> + if (ret)
>> + return ret;
>> +
>> + mutex_lock(&data->mutex);
>> + ret = bma180_set_bw(data, val);
>> + mutex_unlock(&data->mutex);
>> +
>> + return ret ? ret : len;
>> +}
>> +
>> +static IIO_DEVICE_ATTR(bandwidth, S_IRUGO | S_IWUSR, bma180_read_bw_config,
>> + bma180_write_bw_config, 0);
>> +static IIO_CONST_ATTR(bandwidth_available, BMA180_BW_AVAILABLE);
>> +static IIO_CONST_ATTR(scale_available, BMA180_SCALE_AVAILABLE);
>> +
>> +static struct attribute *bma180_attributes[] = {
>> + &iio_dev_attr_bandwidth.dev_attr.attr,
>> + &iio_const_attr_bandwidth_available.dev_attr.attr,
>> + &iio_const_attr_scale_available.dev_attr.attr,
>> + NULL,
>> +};
>> +
>> +static const struct attribute_group bma180_attrs_group = {
>> + .attrs = bma180_attributes,
>> +};
>> +
>> +static int bma180_read_raw(struct iio_dev *indio_dev,
>> + struct iio_chan_spec const *chan, int *val, int *val2,
>> + long mask)
>> +{
>> + struct bma180_data *data = iio_priv(indio_dev);
>> + int ret;
>> +
>> + switch (mask) {
>> + case IIO_CHAN_INFO_RAW:
>> + mutex_lock(&data->mutex);
>> + if (iio_buffer_enabled(indio_dev))
>> + ret = -EBUSY;
>> + else
>> + ret = bma180_get_acc_reg(data, chan->scan_index);
>> + mutex_unlock(&data->mutex);
>> + if (ret < 0)
>> + return ret;
>> + *val = (s16)ret >> chan->scan_type.shift;
>> + return IIO_VAL_INT;
>> + case IIO_CHAN_INFO_SCALE:
>> + *val = 0;
>> + *val2 = data->scale;
>> + return IIO_VAL_INT_PLUS_MICRO;
>> + default:
>> + return -EINVAL;
>> + }
>> +}
>> +
>> +static int bma180_write_raw(struct iio_dev *indio_dev,
>> + struct iio_chan_spec const *chan, int val, int val2, long mask)
>> +{
>> + struct bma180_data *data = iio_priv(indio_dev);
>> + int ret;
>> +
>> + if (mask != IIO_CHAN_INFO_SCALE || val)
>> + return -EINVAL;
>> +
>> + mutex_lock(&data->mutex);
>> + ret = bma180_set_scale(data, val2);
>> + mutex_unlock(&data->mutex);
>> +
>> + return ret;
>> +}
>> +
>> +static int bma180_update_scan_mode(struct iio_dev *indio_dev,
>> + const unsigned long *scan_mask)
>> +{
>> + struct bma180_data *data = iio_priv(indio_dev);
>> +
>> + kfree(data->buff);
>> + data->buff = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
>> + if (!data->buff)
>> + return -ENOMEM;
>> +
>> + return 0;
>> +}
>> +
>> +static const struct iio_info bma180_info = {
>> + .attrs = &bma180_attrs_group,
>> + .read_raw = bma180_read_raw,
>> + .write_raw = bma180_write_raw,
>> + .update_scan_mode = bma180_update_scan_mode,
>> + .driver_module = THIS_MODULE,
>> +};
>> +
>> +#define BMA180_CHANNEL(_index) { \
>> + .type = IIO_ACCEL, \
>> + .indexed = 1, \
>> + .channel = (_index), \
>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
>> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
>> + .scan_index = (_index), \
>> + .scan_type = IIO_ST('s', 14, 16, 2), \
>> +}
>> +
>> +static const struct iio_chan_spec bma180_channels[] = {
>> + BMA180_CHANNEL(AXIS_X),
>> + BMA180_CHANNEL(AXIS_Y),
>> + BMA180_CHANNEL(AXIS_Z),
>> + IIO_CHAN_SOFT_TIMESTAMP(4),
>> +};
>> +
>> +static irqreturn_t bma180_trigger_handler(int irq, void *p)
>> +{
>> + struct iio_poll_func *pf = p;
>> + struct iio_dev *indio_dev = pf->indio_dev;
>> + struct bma180_data *data = iio_priv(indio_dev);
>> + int bit, ret, i = 0;
>> +
>> + mutex_lock(&data->mutex);
>> + if (indio_dev->scan_timestamp) {
>> + ret = indio_dev->scan_bytes / sizeof(s64) - 1;
>
> huh?
> this is yet-another-way to put the timestamp aligned at the end of the
> buffer; can't ret be < 0 if only one channel is enabled?
Can't be ret < 0. If timestamp and 1, 2 or 3 channels are enable
indio_dev->scan_bytes always equal to 16. If timestamp doesn't enable
it will not be executed. I've tested it in all cases.
>
>> + ((s64 *)data->buff)[ret] = iio_get_time_ns();
>> + }
>> +
>> + for_each_set_bit(bit, indio_dev->buffer->scan_mask,
>> + indio_dev->masklength) {
>> + ret = bma180_get_acc_reg(data, bit);
>> + if (ret < 0)
>> + goto err;
>
> mutex not unlocked
>
>> + ((s16 *)data->buff)[i++] = ret;
>> + }
>> + mutex_unlock(&data->mutex);
>> +
>> + iio_push_to_buffers(indio_dev, (u8 *)data->buff);
>> +err:
>> + iio_trigger_notify_done(indio_dev->trig);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static int bma180_data_rdy_trigger_set_state(struct iio_trigger *trig,
>> + bool state)
>> +{
>> + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
>> + struct bma180_data *data = iio_priv(indio_dev);
>> +
>> + return bma180_set_new_data_intr_state(data, state);
>> +}
>> +
>> +static int bma180_trig_try_reen(struct iio_trigger *trig)
>> +{
>> + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
>> + struct bma180_data *data = iio_priv(indio_dev);
>> +
>> + return bma180_reset_intr(data);
>> +}
>> +
>> +static const struct iio_trigger_ops bma180_trigger_ops = {
>> + .set_trigger_state = bma180_data_rdy_trigger_set_state,
>> + .try_reenable = bma180_trig_try_reen,
>> + .owner = THIS_MODULE,
>> +};
>> +
>> +static int bma180_probe(struct i2c_client *client,
>> + const struct i2c_device_id *id)
>> +{
>> + struct bma180_data *data;
>> + struct iio_dev *indio_dev;
>> + struct iio_trigger *trig;
>> + struct device_node *np = client->dev.of_node;
>> + int ret;
>> +
>> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
>> + if (!indio_dev)
>> + return -ENOMEM;
>> +
>> + data = iio_priv(indio_dev);
>> + i2c_set_clientdata(client, indio_dev);
>> + data->client = client;
>> +
>> + if (of_property_read_u32(np, "bosch,bandwidth", &data->bw))
>> + data->bw = BMA180_DEF_BW;
>> + if (of_property_read_u32(np, "bosch,resolution", &data->scale))
>> + data->scale = BMA180_DEF_SCALE;
>> + of_property_read_u32(np, "bosch,mode", &data->mode);
>> +
>> + ret = bma180_chip_init(data);
>> + if (ret < 0)
>> + goto err_1;
>> +
>> + mutex_init(&data->mutex);
>> +
>> + indio_dev->dev.parent = &client->dev;
>> + indio_dev->channels = bma180_channels;
>> + indio_dev->num_channels = ARRAY_SIZE(bma180_channels);
>> + indio_dev->name = BMA180_DRV_NAME;
>> + indio_dev->modes = INDIO_DIRECT_MODE;
>> + indio_dev->info = &bma180_info;
>> +
>> + trig = iio_trigger_alloc("%s-dev%d", indio_dev->name, indio_dev->id);
>> + if (!trig) {
>> + ret = -ENOMEM;
>> + goto err_1;
>> + }
>> +
>> + ret = devm_request_irq(&client->dev, client->irq,
>> + iio_trigger_generic_data_rdy_poll,
>> + IRQF_TRIGGER_RISING, BMA180_IRQ_NAME, trig);
>> + if (ret) {
>> + dev_err(&client->dev, "unable to request IRQ\n");
>> + goto err_2;
>> + }
>> +
>> + trig->dev.parent = &client->dev;
>> + trig->ops = &bma180_trigger_ops;
>> + iio_trigger_set_drvdata(trig, indio_dev);
>> + data->trig = trig;
>> + indio_dev->trig = trig;
>> +
>> + ret = iio_trigger_register(trig);
>> + if (ret)
>> + goto err_2;
>> +
>> + ret = iio_triggered_buffer_setup(indio_dev, NULL,
>> + bma180_trigger_handler, NULL);
>> + if (ret < 0) {
>> + dev_err(&client->dev, "unable to setup iio triggered buffer\n");
>> + goto err_3;
>> + }
>> +
>> + ret = iio_device_register(indio_dev);
>> + if (ret < 0) {
>> + dev_err(&client->dev, "unable to register iio device\n");
>> + goto err_4;
>> + }
>> +
>> + return 0;
>> +
>> +err_4:
>> + iio_triggered_buffer_cleanup(indio_dev);
>> +err_3:
>> + iio_trigger_unregister(trig);
>> +err_2:
>> + iio_trigger_free(trig);
>> +err_1:
>> + bma180_chip_disable(data);
>> +
>> + return ret;
>> +}
>> +
>> +static int bma180_remove(struct i2c_client *client)
>> +{
>> + struct iio_dev *indio_dev = i2c_get_clientdata(client);
>> + struct bma180_data *data = iio_priv(indio_dev);
>> +
>> + iio_device_unregister(indio_dev);
>> + iio_triggered_buffer_cleanup(indio_dev);
>> + iio_trigger_unregister(data->trig);
>> + iio_trigger_free(data->trig);
>> + kfree(data->buff);
>> +
>> + mutex_lock(&data->mutex);
>> + bma180_chip_disable(data);
>> + mutex_unlock(&data->mutex);
>> +
>> + return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> +static int bma180_suspend(struct device *dev)
>> +{
>> + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
>> + struct bma180_data *data = iio_priv(indio_dev);
>> + int ret;
>> +
>> + mutex_lock(&data->mutex);
>> + ret = bma180_set_sleep_state(data, 1);
>> + mutex_unlock(&data->mutex);
>> +
>> + return ret;
>> +}
>> +
>> +static int bma180_resume(struct device *dev)
>> +{
>> + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
>> + struct bma180_data *data = iio_priv(indio_dev);
>> + int ret;
>> +
>> + mutex_lock(&data->mutex);
>> + ret = bma180_set_sleep_state(data, 0);
>> + mutex_unlock(&data->mutex);
>> +
>> + return ret;
>> +}
>> +
>> +static SIMPLE_DEV_PM_OPS(bma180_pm_ops, bma180_suspend, bma180_resume);
>> +#define BMA180_PM_OPS (&bma180_pm_ops)
>> +#else
>> +#define BMA180_PM_OPS NULL
>> +#endif
>> +
>> +static struct i2c_device_id bma180_id[] = {
>> + { BMA180_DRV_NAME, 0 },
>> + { }
>> +};
>> +
>> +MODULE_DEVICE_TABLE(i2c, bma180_id);
>> +
>> +static struct i2c_driver bma180_driver = {
>> + .driver = {
>> + .name = BMA180_DRV_NAME,
>> + .owner = THIS_MODULE,
>> + .pm = BMA180_PM_OPS,
>> + },
>> + .probe = bma180_probe,
>> + .remove = bma180_remove,
>> + .id_table = bma180_id,
>> +};
>> +
>> +module_i2c_driver(bma180_driver);
>> +
>> +MODULE_AUTHOR("Kravchenko Oleksandr <x0199363@...com>");
>> +MODULE_AUTHOR("Texas Instruments, Inc.");
>> +MODULE_DESCRIPTION("Bosch BMA180 triaxial acceleration sensor");
>> +MODULE_LICENSE("GPL");
>>
>
> --
>
> Peter Meerwald
> +43-664-2444418 (mobile)
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Oleksandr Kravchenko
GlobalLogic
P +380633213187
P +380994930248
www.globallogic.com
http://www.globallogic.com/email_disclaimer.txt
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists