| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPybu_1D0mywdj9xhCRfg95J9SRMGnGeUJ9YG-=QKYgnQhFvdw@mail.gmail.com>
Date: Tue, 13 Aug 2013 16:49:46 +0200
From: Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>
To: Bryan Wu <cooloney@...il.com>,
Peter Meerwald <p.meerwald@...-electronic.com>,
Richard Purdie <rpurdie@...ys.net>,
Linux LED Subsystem <linux-leds@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>
Subject: Re: [PATCH v3 1/4] leds-pca9633: Add support for PCA9634
Hello Bryan
Did you have a chance to look at the new series?
Thanks!
On Fri, Aug 9, 2013 at 8:45 AM, Ricardo Ribalda Delgado
<ricardo.ribalda@...il.com> wrote:
> Add support for PCA9634 chip, which belongs to the same family as the
> 9633 but with support for 8 outputs instead of 4.
>
> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>
> ---
> drivers/leds/Kconfig | 7 ++--
> drivers/leds/leds-pca9633.c | 74 +++++++++++++++++++++++++++++++------------
> 2 files changed, 58 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index e43402d..023af58 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -280,12 +280,13 @@ config LEDS_PCA955X
> devices include PCA9550, PCA9551, PCA9552, and PCA9553.
>
> config LEDS_PCA9633
> - tristate "LED support for PCA9633 I2C chip"
> + tristate "LED support for PCA963x I2C chip"
> depends on LEDS_CLASS
> depends on I2C
> help
> - This option enables support for LEDs connected to the PCA9633
> - LED driver chip accessed via the I2C bus.
> + This option enables support for LEDs connected to the PCA963x
> + LED driver chip accessed via the I2C bus. Supported
> + devices include PCA9633 and PCA9634
>
> config LEDS_WM831X_STATUS
> tristate "LED support for status LEDs on WM831x PMICs"
> diff --git a/drivers/leds/leds-pca9633.c b/drivers/leds/leds-pca9633.c
> index 9aae567..070358a 100644
> --- a/drivers/leds/leds-pca9633.c
> +++ b/drivers/leds/leds-pca9633.c
> @@ -1,7 +1,9 @@
> /*
> * Copyright 2011 bct electronic GmbH
> + * Copyright 2013 Qtechnology/AS
> *
> * Author: Peter Meerwald <p.meerwald@...-electronic.com>
> + * Author: Ricardo Ribalda <ricardo.ribalda@...il.com>
> *
> * Based on leds-pca955x.c
> *
> @@ -10,6 +12,7 @@
> * directory of this archive for more details.
> *
> * LED driver for the PCA9633 I2C LED driver (7-bit slave address 0x62)
> + * LED driver for the PCA9634 I2C LED driver (7-bit slave address set by hw.)
> *
> */
>
> @@ -33,20 +36,42 @@
> #define PCA9633_MODE1 0x00
> #define PCA9633_MODE2 0x01
> #define PCA9633_PWM_BASE 0x02
> -#define PCA9633_LEDOUT 0x08
> +
> +enum pca9633_type {
> + pca9633,
> + pca9634,
> +};
> +
> +struct pca9633_chipdef {
> + u8 ledout_base;
> + int n_leds;
> +};
> +
> +static struct pca9633_chipdef pca9633_chipdefs[] = {
> + [pca9633] = {
> + .ledout_base = 0x8,
> + .n_leds = 4,
> + },
> + [pca9634] = {
> + .ledout_base = 0xc,
> + .n_leds = 8,
> + },
> +};
>
> static const struct i2c_device_id pca9633_id[] = {
> - { "pca9633", 0 },
> + { "pca9633", pca9633 },
> + { "pca9634", pca9634 },
> { }
> };
> MODULE_DEVICE_TABLE(i2c, pca9633_id);
>
> struct pca9633_led {
> struct i2c_client *client;
> + struct pca9633_chipdef *chipdef;
> struct work_struct work;
> enum led_brightness brightness;
> struct led_classdev led_cdev;
> - int led_num; /* 0 .. 3 potentially */
> + int led_num; /* 0 .. 7 potentially */
> char name[32];
> };
>
> @@ -54,24 +79,26 @@ static void pca9633_led_work(struct work_struct *work)
> {
> struct pca9633_led *pca9633 = container_of(work,
> struct pca9633_led, work);
> - u8 ledout = i2c_smbus_read_byte_data(pca9633->client, PCA9633_LEDOUT);
> - int shift = 2 * pca9633->led_num;
> + u8 ledout_addr = pca9633->chipdef->ledout_base + (pca9633->led_num / 4);
> + u8 ledout;
> + int shift = 2 * (pca9633->led_num % 4);
> u8 mask = 0x3 << shift;
>
> + ledout = i2c_smbus_read_byte_data(pca9633->client, ledout_addr);
> switch (pca9633->brightness) {
> case LED_FULL:
> - i2c_smbus_write_byte_data(pca9633->client, PCA9633_LEDOUT,
> + i2c_smbus_write_byte_data(pca9633->client, ledout_addr,
> (ledout & ~mask) | (PCA9633_LED_ON << shift));
> break;
> case LED_OFF:
> - i2c_smbus_write_byte_data(pca9633->client, PCA9633_LEDOUT,
> + i2c_smbus_write_byte_data(pca9633->client, ledout_addr,
> ledout & ~mask);
> break;
> default:
> i2c_smbus_write_byte_data(pca9633->client,
> PCA9633_PWM_BASE + pca9633->led_num,
> pca9633->brightness);
> - i2c_smbus_write_byte_data(pca9633->client, PCA9633_LEDOUT,
> + i2c_smbus_write_byte_data(pca9633->client, ledout_addr,
> (ledout & ~mask) | (PCA9633_LED_PWM << shift));
> break;
> }
> @@ -98,26 +125,30 @@ static int pca9633_probe(struct i2c_client *client,
> {
> struct pca9633_led *pca9633;
> struct pca9633_platform_data *pdata;
> + struct pca9633_chipdef *chip;
> int i, err;
>
> + chip = &pca9633_chipdefs[id->driver_data];
> pdata = client->dev.platform_data;
>
> - if (pdata) {
> - if (pdata->leds.num_leds <= 0 || pdata->leds.num_leds > 4) {
> - dev_err(&client->dev, "board info must claim at most 4 LEDs");
> - return -EINVAL;
> - }
> + if (pdata && (pdata->leds.num_leds < 1 ||
> + pdata->leds.num_leds > chip->n_leds)) {
> + dev_err(&client->dev, "board info must claim 1-%d LEDs",
> + chip->n_leds);
> + return -EINVAL;
> }
>
> - pca9633 = devm_kzalloc(&client->dev, 4 * sizeof(*pca9633), GFP_KERNEL);
> + pca9633 = devm_kzalloc(&client->dev, chip->n_leds * sizeof(*pca9633),
> + GFP_KERNEL);
> if (!pca9633)
> return -ENOMEM;
>
> i2c_set_clientdata(client, pca9633);
>
> - for (i = 0; i < 4; i++) {
> + for (i = 0; i < chip->n_leds; i++) {
> pca9633[i].client = client;
> pca9633[i].led_num = i;
> + pca9633[i].chipdef = chip;
>
> /* Platform data can specify LED names and default triggers */
> if (pdata && i < pdata->leds.num_leds) {
> @@ -151,7 +182,9 @@ static int pca9633_probe(struct i2c_client *client,
> i2c_smbus_write_byte_data(client, PCA9633_MODE2, 0x01);
>
> /* Turn off LEDs */
> - i2c_smbus_write_byte_data(client, PCA9633_LEDOUT, 0x00);
> + i2c_smbus_write_byte_data(client, chip->ledout_base, 0x00);
> + if (chip->n_leds > 4)
> + i2c_smbus_write_byte_data(client, chip->ledout_base + 1, 0x00);
>
> return 0;
>
> @@ -169,10 +202,11 @@ static int pca9633_remove(struct i2c_client *client)
> struct pca9633_led *pca9633 = i2c_get_clientdata(client);
> int i;
>
> - for (i = 0; i < 4; i++) {
> - led_classdev_unregister(&pca9633[i].led_cdev);
> - cancel_work_sync(&pca9633[i].work);
> - }
> + for (i = 0; i < pca9633->chipdef->n_leds; i++)
> + if (pca9633[i].client != NULL) {
> + led_classdev_unregister(&pca9633[i].led_cdev);
> + cancel_work_sync(&pca9633[i].work);
> + }
>
> return 0;
> }
> --
> 1.7.10.4
>
--
Ricardo Ribalda
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists