[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11.0-rc5-2-din-small (sedat.dilek@gmail.com@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Tue Aug 13 18:17:01 CEST 2013 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro drm.debug=6 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask FE0000000 write-back [ 0.000000] 6 base 11FE00000 mask FFFE00000 uncachable [ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0204c000, 0x0204cfff] PGTABLE [ 0.000000] BRK [0x0204d000, 0x0204dfff] PGTABLE [ 0.000000] BRK [0x0204e000, 0x0204efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff] [ 0.000000] [mem 0x11fc00000-0x11fdfffff] page 2M [ 0.000000] BRK [0x0204f000, 0x0204ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff] [ 0.000000] [mem 0x11c000000-0x11fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff] [ 0.000000] [mem 0x40200000-0xd9bfffff] page 2M [ 0.000000] [mem 0xd9c00000-0xd9c9efff] page 4k [ 0.000000] BRK [0x02050000, 0x02050fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff] [ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k [ 0.000000] RAMDISK: [mem 0x37962000-0x37ca8fff] [ 0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD) [ 0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002) [ 0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD SNB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000daf47000 00040 [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001) [ 0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000dafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01 Iffs IffsAsl 00003000 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff] [ 0.000000] NODE_DATA [mem 0x11fdf7000-0x11fdfbfff] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xd9c9efff] [ 0.000000] node 0: [mem 0xdafff000-0xdaffffff] [ 0.000000] node 0: [mem 0x100000000-0x11fdfffff] [ 0.000000] On node 0 totalpages: 1021500 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12127 pages used for memmap [ 0.000000] DMA32 zone: 886944 pages, LIFO batch:31 [ 0.000000] Normal zone: 1785 pages used for memmap [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd9c9f000-0xdae7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdae7f000-0xdaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s87488 r8192 d23104 u262144 [ 0.000000] pcpu-alloc: s87488 r8192 d23104 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1007376 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro drm.debug=6 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3938460K/4086000K available (7112K kernel code, 1044K rwdata, 3128K rodata, 1332K init, 1984K bss, 147540K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 0 of 0 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1596.317 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.63 BogoMIPS (lpj=6385268) [ 0.000081] pid_max: default: 32768 minimum: 301 [ 0.000246] Security Framework initialized [ 0.000302] AppArmor: AppArmor initialized [ 0.000339] Yama: becoming mindful. [ 0.000749] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001858] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002360] Mount-cache hash table entries: 256 [ 0.002911] Initializing cgroup subsys memory [ 0.003012] Initializing cgroup subsys devices [ 0.003051] Initializing cgroup subsys freezer [ 0.003089] Initializing cgroup subsys blkio [ 0.003126] Initializing cgroup subsys perf_event [ 0.003165] Initializing cgroup subsys hugetlb [ 0.003250] Disabled fast string operations [ 0.003287] CPU: Physical Processor ID: 0 [ 0.003323] CPU: Processor Core ID: 0 [ 0.003363] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003363] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003429] mce: CPU supports 7 MCE banks [ 0.003481] CPU0: Thermal monitoring enabled (TM1) [ 0.003528] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.003528] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.003528] tlb_flushall_shift: 5 [ 0.003701] Freeing SMP alternatives memory: 24K (ffffffff81e54000 - ffffffff81e5a000) [ 0.004796] ACPI: Core revision 20130517 [ 0.015608] ACPI: All ACPI Tables successfully acquired [ 0.029534] ftrace: allocating 27051 entries in 106 pages [ 0.044842] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.084538] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07) [ 0.085153] TSC deadline timer enabled [ 0.085166] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.085315] ... version: 3 [ 0.085351] ... bit width: 48 [ 0.085386] ... generic registers: 4 [ 0.085422] ... value mask: 0000ffffffffffff [ 0.085460] ... max period: 0000ffffffffffff [ 0.085498] ... fixed-purpose events: 3 [ 0.085534] ... event mask: 000000070000000f [ 0.098628] Disabled fast string operations [ 0.101815] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.113493] Disabled fast string operations [ 0.127207] Disabled fast string operations [ 0.087556] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.129337] Brought up 4 CPUs [ 0.129439] smpboot: Total of 4 processors activated (12770.53 BogoMIPS) [ 0.133513] devtmpfs: initialized [ 0.135555] EVM: security.selinux [ 0.135591] EVM: security.SMACK64 [ 0.135625] EVM: security.capability [ 0.135751] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes) [ 0.137274] regulator-dummy: no parameters [ 0.137469] NET: Registered protocol family 16 [ 0.137855] ACPI: bus type PCI registered [ 0.138004] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.138063] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.145003] PCI: Using configuration type 1 for base access [ 0.148375] bio: create slab at 0 [ 0.148834] ACPI: Added _OSI(Module Device) [ 0.148873] ACPI: Added _OSI(Processor Device) [ 0.148910] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.148948] ACPI: Added _OSI(Processor Aggregator Device) [ 0.150765] ACPI: EC: Look up EC in DSDT [ 0.173112] ACPI: Executed 1 blocks of module-level executable AML code [ 0.179097] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.191575] ACPI: SSDT 00000000dae70718 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.192186] ACPI: Dynamic OEM Table Load: [ 0.192256] ACPI: SSDT (null) 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.205606] ACPI: SSDT 00000000dae71a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.206287] ACPI: Dynamic OEM Table Load: [ 0.206357] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.217538] ACPI: SSDT 00000000dae6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.218112] ACPI: Dynamic OEM Table Load: [ 0.218182] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.235407] ACPI: Interpreter enabled [ 0.235457] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571) [ 0.235558] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130517/hwxface-571) [ 0.235655] ACPI: (supports S0 S1 S3 S5) [ 0.235691] ACPI: Using IOAPIC for interrupt routing [ 0.235788] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.236017] ACPI: No dock devices found. [ 0.259733] ACPI: Power Resource [FN00] (off) [ 0.259958] ACPI: Power Resource [FN01] (off) [ 0.260173] ACPI: Power Resource [FN02] (off) [ 0.260388] ACPI: Power Resource [FN03] (off) [ 0.260607] ACPI: Power Resource [FN04] (off) [ 0.261793] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.262166] \_SB_.PCI0:_OSC invalid UUID [ 0.262168] _OSC request data:1 8 0 [ 0.263118] PCI host bridge to bus 0000:00 [ 0.263158] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.263198] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.263238] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.263279] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.263321] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.263363] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.263419] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.263572] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.263585] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.263592] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.263598] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.263782] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.263808] pci 0000:00:16.0: reg 0x10: [mem 0xf0705000-0xf070500f 64bit] [ 0.263893] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.264049] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.264073] pci 0000:00:1a.0: reg 0x10: [mem 0xf070a000-0xf070a3ff] [ 0.264174] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.264319] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.264338] pci 0000:00:1b.0: reg 0x10: [mem 0xf0700000-0xf0703fff 64bit] [ 0.264417] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.264500] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.264605] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.264696] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.264779] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.264888] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.264977] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.265070] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.265175] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.265266] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.265425] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.265449] pci 0000:00:1d.0: reg 0x10: [mem 0xf0709000-0xf07093ff] [ 0.265550] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.265693] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.265935] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.265958] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.265968] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097] [ 0.265978] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.265988] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093] [ 0.265998] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.266008] pci 0000:00:1f.2: reg 0x24: [mem 0xf0708000-0xf07087ff] [ 0.266061] pci 0000:00:1f.2: PME# supported from D3hot [ 0.266194] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.266212] pci 0000:00:1f.3: reg 0x10: [mem 0xf0704000-0xf07040ff 64bit] [ 0.266236] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.266618] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000 [ 0.266799] pci 0000:01:00.0: reg 0x10: [mem 0xf0600000-0xf0601fff 64bit] [ 0.267535] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.267705] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.273501] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.273546] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.273724] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.273796] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.273913] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref] [ 0.273989] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref] [ 0.274321] pci 0000:02:00.0: supports D1 D2 [ 0.274323] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.274450] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.281421] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.281483] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.281492] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.281618] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.281656] pci 0000:03:00.0: reg 0x10: [mem 0xf0500000-0xf0507fff 64bit] [ 0.281855] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.289392] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.289468] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.289650] \_SB_.PCI0:_OSC invalid UUID [ 0.289652] _OSC request data:1 1f 0 [ 0.289657] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.289713] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.290635] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.290983] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.291377] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.291721] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.292065] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.292437] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.292828] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.293176] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.294071] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.294148] ACPI: \_SB_.PCI0: notify handler is installed [ 0.294209] Found 1 acpi root devices [ 0.294279] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.294565] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.294624] vgaarb: loaded [ 0.294657] vgaarb: bridge control possible 0000:00:02.0 [ 0.295368] SCSI subsystem initialized [ 0.295405] ACPI: bus type ATA registered [ 0.295554] libata version 3.00 loaded. [ 0.295616] ACPI: bus type USB registered [ 0.295697] usbcore: registered new interface driver usbfs [ 0.295759] usbcore: registered new interface driver hub [ 0.295850] usbcore: registered new device driver usb [ 0.296238] PCI: Using ACPI for IRQ routing [ 0.297984] PCI: pci_cache_line_size set to 64 bytes [ 0.298093] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.298096] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff] [ 0.298098] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.298100] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff] [ 0.298346] NetLabel: Initializing [ 0.298382] NetLabel: domain hash size = 128 [ 0.298418] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.298501] NetLabel: unlabeled traffic allowed by default [ 0.298632] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.298822] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.300884] Switched to clocksource hpet [ 0.318480] AppArmor: AppArmor Filesystem Enabled [ 0.318574] pnp: PnP ACPI init [ 0.318624] ACPI: bus type PNP registered [ 0.318942] pnp 00:00: [dma 4] [ 0.319058] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.319104] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.319270] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.319327] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.319405] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.319446] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.319487] system 00:04: [io 0x5000-0x5003] has been reserved [ 0.319528] system 00:04: [io 0xffff] has been reserved [ 0.319568] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.319609] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.319650] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.319690] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.319730] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.319771] system 00:04: [io 0x5000-0x500f] could not be reserved [ 0.319813] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.319861] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.319951] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.319993] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.320050] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.320133] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active) [ 0.320445] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.320488] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.320529] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.320571] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.320613] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.320655] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.320696] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.320740] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.320782] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.320824] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.320878] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.321621] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.321659] pnp: PnP ACPI: found 11 devices [ 0.321696] ACPI: bus type PNP unregistered [ 0.329779] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.329824] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.329874] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.329914] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.329962] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.330023] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.330066] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.330536] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.330539] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.330541] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.330543] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff] [ 0.330545] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.330547] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff] [ 0.330550] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.330552] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.330554] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.330688] NET: Registered protocol family 2 [ 0.331093] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.331330] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes) [ 0.331660] TCP: Hash tables configured (established 32768 bind 32768) [ 0.331960] TCP: reno registered [ 0.332012] UDP hash table entries: 2048 (order: 5, 196608 bytes) [ 0.332117] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes) [ 0.332412] NET: Registered protocol family 1 [ 0.332467] pci 0000:00:02.0: Boot video device [ 0.333257] PCI: CLS 64 bytes, default 64 [ 0.333466] Trying to unpack rootfs image as initramfs... [ 0.409863] Freeing initrd memory: 3356K (ffff880037962000 - ffff880037ca9000) [ 0.409924] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.409965] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff] [ 0.410399] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28 [ 0.410447] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28 [ 0.410497] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28 [ 0.410550] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28 [ 0.410673] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.410731] Scanning for low memory corruption every 60 seconds [ 0.411368] Initialise module verification [ 0.411473] audit: initializing netlink socket (disabled) [ 0.411533] type=2000 audit(1376432463.400:1): initialized [ 0.441575] bounce pool size: 64 pages [ 0.442137] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.442861] VFS: Disk quotas dquot_6.5.2 [ 0.442940] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.443821] fuse init (API version 7.22) [ 0.443962] msgmni has been set to 7698 [ 0.444677] Key type asymmetric registered [ 0.444715] Asymmetric key parser 'x509' registered [ 0.444813] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.444928] io scheduler noop registered [ 0.444965] io scheduler deadline registered (default) [ 0.445039] io scheduler cfq registered [ 0.445452] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.445531] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.445718] intel_idle: MWAIT substates: 0x21120 [ 0.445719] intel_idle: v0.4 model 0x2A [ 0.445720] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.446256] ACPI: AC Adapter [ADP1] (on-line) [ 0.446714] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.446791] ACPI: Lid Switch [LID0] [ 0.446890] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.446949] ACPI: Power Button [PWRB] [ 0.447049] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.447105] ACPI: Power Button [PWRF] [ 0.447230] ACPI: Fan [FAN0] (off) [ 0.447317] ACPI: Fan [FAN1] (off) [ 0.447406] ACPI: Fan [FAN2] (off) [ 0.447488] ACPI: Fan [FAN3] (off) [ 0.447572] ACPI: Fan [FAN4] (off) [ 0.447687] ACPI: Requesting acpi_cpufreq [ 0.451075] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.451116] ACPI: Thermal Zone [TZ00] (70 C) [ 0.451577] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.451617] ACPI: Thermal Zone [TZ01] (30 C) [ 0.451704] GHES: HEST is not enabled! [ 0.451954] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.457744] ACPI: Battery Slot [BAT1] (battery present) [ 0.457762] Linux agpgart interface v0.103 [ 0.460304] brd: module loaded [ 0.461659] loop: module loaded [ 0.461921] mei_me 0000:00:16.0: setting latency timer to 64 [ 0.461968] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [ 0.465096] ahci 0000:00:1f.2: version 3.0 [ 0.465272] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.465478] ahci: SSS flag set, parallel bus scan disabled [ 0.480790] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode [ 0.480848] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 0.480909] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.505590] scsi0 : ahci [ 0.505836] scsi1 : ahci [ 0.505997] scsi2 : ahci [ 0.506153] scsi3 : ahci [ 0.506310] scsi4 : ahci [ 0.506465] scsi5 : ahci [ 0.506576] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 41 [ 0.506632] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 41 [ 0.506686] ata3: DUMMY [ 0.506720] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 41 [ 0.506775] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 41 [ 0.506828] ata6: DUMMY [ 0.507820] libphy: Fixed MDIO Bus: probed [ 0.508133] tun: Universal TUN/TAP device driver, 1.6 [ 0.508171] tun: (C) 1999-2004 Max Krasnyansky [ 0.508289] PPP generic driver version 2.4.2 [ 0.508438] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.508479] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 0.508486] ehci-pci: EHCI PCI platform driver [ 0.508704] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.508714] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.508774] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.508849] ehci-pci 0000:00:1a.0: debug port 2 [ 0.508889] ehci-pci 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 0.508893] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 0.508931] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.512806] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.512808] ehci-pci 0000:00:1a.0: supports USB remote wakeup [ 0.512854] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000 [ 0.512896] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.524739] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.524828] usb usb1: default language 0x0409 [ 0.524840] usb usb1: udev 1, busnum 1, minor = 0 [ 0.524842] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.524884] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.524938] usb usb1: Product: EHCI Host Controller [ 0.524976] usb usb1: Manufacturer: Linux 3.11.0-rc5-2-din-small ehci_hcd [ 0.525018] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.525179] usb usb1: usb_probe_device [ 0.525182] usb usb1: configuration #1 chosen from 1 choice [ 0.525193] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.525226] hub 1-0:1.0: usb_probe_interface [ 0.525228] hub 1-0:1.0: usb_probe_interface - got id [ 0.525230] hub 1-0:1.0: USB hub found [ 0.525272] hub 1-0:1.0: 2 ports detected [ 0.525309] hub 1-0:1.0: standalone hub [ 0.525310] hub 1-0:1.0: no power switching (usb 1.0) [ 0.525312] hub 1-0:1.0: individual port over-current protection [ 0.525314] hub 1-0:1.0: power on to power good time: 20ms [ 0.525319] hub 1-0:1.0: local power source is good [ 0.525377] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.525596] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.525603] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.525648] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.525719] ehci-pci 0000:00:1d.0: debug port 2 [ 0.525759] ehci-pci 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 0.525763] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 0.525799] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.529673] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.529674] ehci-pci 0000:00:1d.0: supports USB remote wakeup [ 0.529719] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000 [ 0.529761] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.540727] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.540805] usb usb2: default language 0x0409 [ 0.540816] usb usb2: udev 1, busnum 2, minor = 128 [ 0.540818] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.540860] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.540914] usb usb2: Product: EHCI Host Controller [ 0.540952] usb usb2: Manufacturer: Linux 3.11.0-rc5-2-din-small ehci_hcd [ 0.540993] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.541143] usb usb2: usb_probe_device [ 0.541145] usb usb2: configuration #1 chosen from 1 choice [ 0.541154] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.541186] hub 2-0:1.0: usb_probe_interface [ 0.541187] hub 2-0:1.0: usb_probe_interface - got id [ 0.541190] hub 2-0:1.0: USB hub found [ 0.541231] hub 2-0:1.0: 2 ports detected [ 0.541268] hub 2-0:1.0: standalone hub [ 0.541269] hub 2-0:1.0: no power switching (usb 1.0) [ 0.541271] hub 2-0:1.0: individual port over-current protection [ 0.541272] hub 2-0:1.0: power on to power good time: 20ms [ 0.541277] hub 2-0:1.0: local power source is good [ 0.541325] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.541404] ehci-platform: EHCI generic platform driver [ 0.541458] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.541498] ohci_hcd: block sizes: ed 80 td 96 [ 0.541505] ohci-pci: OHCI PCI platform driver [ 0.541560] ohci-platform: OHCI generic platform driver [ 0.541613] uhci_hcd: USB Universal Host Controller Interface driver [ 0.541847] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.541891] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 [ 0.551657] xhci_hcd 0000:03:00.0: supports USB remote wakeup [ 0.551688] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X [ 0.551695] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X [ 0.551702] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X [ 0.551712] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X [ 0.551719] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X [ 0.551991] usb usb3: default language 0x0409 [ 0.552002] usb usb3: udev 1, busnum 3, minor = 256 [ 0.552004] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.552045] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.552099] usb usb3: Product: xHCI Host Controller [ 0.552137] usb usb3: Manufacturer: Linux 3.11.0-rc5-2-din-small xhci_hcd [ 0.552178] usb usb3: SerialNumber: 0000:03:00.0 [ 0.552358] usb usb3: usb_probe_device [ 0.552360] usb usb3: configuration #1 chosen from 1 choice [ 0.552365] xHCI xhci_add_endpoint called for root hub [ 0.552366] xHCI xhci_check_bandwidth called for root hub [ 0.552373] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.552405] hub 3-0:1.0: usb_probe_interface [ 0.552407] hub 3-0:1.0: usb_probe_interface - got id [ 0.552410] hub 3-0:1.0: USB hub found [ 0.552457] hub 3-0:1.0: 2 ports detected [ 0.552494] hub 3-0:1.0: standalone hub [ 0.552495] hub 3-0:1.0: no power switching (usb 1.0) [ 0.552497] hub 3-0:1.0: individual port over-current protection [ 0.552498] hub 3-0:1.0: Single TT [ 0.552500] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.552501] hub 3-0:1.0: power on to power good time: 20ms [ 0.552507] hub 3-0:1.0: local power source is good [ 0.552545] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.552614] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.552656] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 0.552727] xhci_hcd 0000:03:00.0: supports USB remote wakeup [ 0.552763] usb usb4: skipped 1 descriptor after endpoint [ 0.552768] usb usb4: default language 0x0409 [ 0.552779] usb usb4: udev 1, busnum 4, minor = 384 [ 0.552781] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.552822] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.552876] usb usb4: Product: xHCI Host Controller [ 0.552914] usb usb4: Manufacturer: Linux 3.11.0-rc5-2-din-small xhci_hcd [ 0.552955] usb usb4: SerialNumber: 0000:03:00.0 [ 0.553091] usb usb4: usb_probe_device [ 0.553093] usb usb4: configuration #1 chosen from 1 choice [ 0.553097] xHCI xhci_add_endpoint called for root hub [ 0.553098] xHCI xhci_check_bandwidth called for root hub [ 0.553104] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 0.553132] hub 4-0:1.0: usb_probe_interface [ 0.553134] hub 4-0:1.0: usb_probe_interface - got id [ 0.553136] hub 4-0:1.0: USB hub found [ 0.553182] hub 4-0:1.0: 2 ports detected [ 0.553219] hub 4-0:1.0: standalone hub [ 0.553221] hub 4-0:1.0: no power switching (usb 1.0) [ 0.553222] hub 4-0:1.0: individual port over-current protection [ 0.553224] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.553225] hub 4-0:1.0: power on to power good time: 20ms [ 0.553231] hub 4-0:1.0: local power source is good [ 0.553268] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 0.564779] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12 [ 0.571153] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.571197] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.571455] mousedev: PS/2 mouse device common for all mice [ 0.571955] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.572028] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.572147] device-mapper: uevent: version 1.0.3 [ 0.572270] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com [ 0.572333] Intel P-state driver initializing. [ 0.572383] Intel pstate controlling: cpu 0 [ 0.572467] Intel pstate controlling: cpu 1 [ 0.572536] Intel pstate controlling: cpu 2 [ 0.572595] Intel pstate controlling: cpu 3 [ 0.572880] cpuidle: using governor ladder [ 0.573154] cpuidle: using governor menu [ 0.573196] ledtrig-cpu: registered to indicate activity on CPUs [ 0.573457] ashmem: initialized [ 0.573662] TCP: cubic registered [ 0.573817] NET: Registered protocol family 10 [ 0.574323] NET: Registered protocol family 17 [ 0.574378] Key type dns_resolver registered [ 0.574828] PM: Hibernation image not present or could not be loaded. [ 0.574835] Loading module verification certificates [ 0.576034] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 975a81a0220616d60fc82912a86110d9fa3389eb' [ 0.576119] registered taskstats version 1 [ 0.579303] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.582268] Key type trusted registered [ 0.589934] Key type encrypted registered [ 0.594449] rtc_cmos 00:05: setting system clock to 2013-08-13 22:21:03 UTC (1376432463) [ 0.594914] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.594958] EDD information not available. [ 0.624819] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.624836] hub 1-0:1.0: port 1: status 0501 change 0001 [ 0.640785] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.640803] hub 2-0:1.0: port 1: status 0501 change 0001 [ 0.648833] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.648866] hub 3-0:1.0: hub_suspend [ 0.648878] usb usb3: bus auto-suspend, wakeup 1 [ 0.652831] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.652895] hub 4-0:1.0: hub_suspend [ 0.652906] usb usb4: bus auto-suspend, wakeup 1 [ 0.661352] usb usb4: usb wakeup-resume [ 0.661364] usb usb4: usb auto-resume [ 0.672742] hub 4-0:1.0: hub_resume [ 0.672772] hub 4-0:1.0: port 1: status 0203 change 0001 [ 0.724761] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 0.724791] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 0.780988] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 0.781002] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 0.824644] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.825917] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133 [ 0.825993] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.827452] ata1.00: configured for UDMA/133 [ 0.827969] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5 [ 0.828621] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.828667] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.828806] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.829359] sd 0:0:0:0: [sda] Write Protect is off [ 0.829431] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.829653] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.836573] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.847774] sda: sda1 sda2 sda3 [ 0.849009] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.892784] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 0.892798] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 0.968893] usb 1-1: udev 2, busnum 1, minor = 1 [ 0.968904] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 0.968977] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.969402] usb 1-1: usb_probe_device [ 0.969412] usb 1-1: configuration #1 chosen from 1 choice [ 0.969574] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 0.969649] hub 1-1:1.0: usb_probe_interface [ 0.969654] hub 1-1:1.0: usb_probe_interface - got id [ 0.969661] hub 1-1:1.0: USB hub found [ 0.969949] hub 1-1:1.0: 6 ports detected [ 0.970020] hub 1-1:1.0: standalone hub [ 0.970024] hub 1-1:1.0: individual port power switching [ 0.970028] hub 1-1:1.0: individual port over-current protection [ 0.970031] hub 1-1:1.0: Single TT [ 0.970035] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.970039] hub 1-1:1.0: power on to power good time: 100ms [ 0.970318] hub 1-1:1.0: local power source is good [ 0.970833] hub 1-1:1.0: enabling power on all ports [ 0.972517] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 0.972537] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 1.028811] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 1.028827] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.068716] hub 1-1:1.0: port 2: status 0101 change 0001 [ 1.069130] hub 1-1:1.0: port 4: status 0101 change 0001 [ 1.084455] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.140732] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 1.140748] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.148427] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.149645] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133 [ 1.149724] ata2.00: 31277232 sectors, multi 1: LBA48 [ 1.150476] ata2.00: configured for UDMA/133 [ 1.151013] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 SSD PQ: 0 ANSI: 5 [ 1.151585] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1.151655] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.151994] sd 1:0:0:0: [sdb] Write Protect is off [ 1.152064] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.152122] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.153525] sdb: sdb1 sdb2 [ 1.154703] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.168394] usb 1-1: link qh256-0001/ffff8801186b73c0 start 1 [1/0 us] [ 1.216712] usb 2-1: udev 2, busnum 2, minor = 129 [ 1.216723] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.216796] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.217232] usb 2-1: usb_probe_device [ 1.217242] usb 2-1: configuration #1 chosen from 1 choice [ 1.217565] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 1.217652] hub 2-1:1.0: usb_probe_interface [ 1.217657] hub 2-1:1.0: usb_probe_interface - got id [ 1.217665] hub 2-1:1.0: USB hub found [ 1.217890] hub 2-1:1.0: 6 ports detected [ 1.217961] hub 2-1:1.0: standalone hub [ 1.217965] hub 2-1:1.0: individual port power switching [ 1.217969] hub 2-1:1.0: individual port over-current protection [ 1.217972] hub 2-1:1.0: Single TT [ 1.217976] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.217980] hub 2-1:1.0: power on to power good time: 100ms [ 1.218198] hub 2-1:1.0: local power source is good [ 1.218853] hub 2-1:1.0: enabling power on all ports [ 1.220196] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 1.220219] hub 4-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s [ 1.316955] hub 2-1:1.0: port 5: status 0101 change 0001 [ 1.335877] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1.348838] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 1.349289] usb 4-1: skipped 1 descriptor after endpoint [ 1.349297] usb 4-1: skipped 1 descriptor after endpoint [ 1.349448] usb 4-1: default language 0x0409 [ 1.349892] usb 4-1: udev 2, busnum 4, minor = 385 [ 1.349898] usb 4-1: New USB device found, idVendor=174c, idProduct=55aa [ 1.349972] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1.350045] usb 4-1: Product: MEDION HDDrive-n-GO [ 1.350112] usb 4-1: Manufacturer: MEDION [ 1.350177] usb 4-1: SerialNumber: 3180000000000000092C [ 1.350556] usb 4-1: usb_probe_device [ 1.350562] usb 4-1: configuration #1 chosen from 1 choice [ 1.351572] usb 4-1: Successful Endpoint Configure command [ 1.351670] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 1.351882] hub 1-1:1.0: state 7 ports 6 chg 0014 evt 0000 [ 1.351993] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 1.408227] tsc: Refined TSC clocksource calibration: 1596.373 MHz [ 1.416228] usb 2-1: link qh256-0001/ffff8801186b70c0 start 1 [1/0 us] [ 1.420373] usb 1-1.2: new low-speed USB device number 3 using ehci-pci [ 1.468188] ata4: SATA link down (SStatus 0 SControl 300) [ 1.515343] usb 1-1.2: skipped 1 descriptor after interface [ 1.515817] usb 1-1.2: default language 0x0409 [ 1.518488] usb 1-1.2: udev 3, busnum 1, minor = 2 [ 1.518499] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e [ 1.518574] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.518663] usb 1-1.2: Product: USB-PS/2 Optical Mouse [ 1.518727] usb 1-1.2: Manufacturer: Logitech [ 1.519164] usb 1-1.2: usb_probe_device [ 1.519174] usb 1-1.2: configuration #1 chosen from 1 choice [ 1.519736] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [ 1.520136] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s [ 1.592243] usb 1-1.4: new high-speed USB device number 4 using ehci-pci [ 1.788002] ata5: SATA link down (SStatus 0 SControl 300) [ 1.790910] Freeing unused kernel memory: 1332K (ffffffff81d07000 - ffffffff81e54000) [ 1.791001] Write protecting the kernel read-only data: 12288k [ 1.796929] Freeing unused kernel memory: 1068K (ffff8800016f5000 - ffff880001800000) [ 1.801844] Freeing unused kernel memory: 968K (ffff880001b0e000 - ffff880001c00000) [ 1.829792] usb 1-1.4: skipped 1 descriptor after configuration [ 1.829801] usb 1-1.4: skipped 5 descriptors after interface [ 1.829809] usb 1-1.4: skipped 1 descriptor after endpoint [ 1.829814] usb 1-1.4: skipped 23 descriptors after interface [ 1.831884] usb 1-1.4: default language 0x0409 [ 1.842328] udevd[121]: starting version 175 [ 1.843902] usb 1-1.4: udev 4, busnum 1, minor = 3 [ 1.843910] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018 [ 1.843966] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.844033] usb 1-1.4: Product: WebCam SC-13HDL11431N [ 1.844084] usb 1-1.4: Manufacturer: 123 [ 1.844331] usb 1-1.4: usb_probe_device [ 1.844337] usb 1-1.4: configuration #1 chosen from 1 choice [ 1.844495] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0) [ 1.989114] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.989201] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.989577] r8169 0000:02:00.0: irq 47 for MSI/MSI-X [ 1.995986] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000620000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47 [ 1.996059] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.005035] usb-storage 4-1:1.0: usb_probe_interface [ 2.005046] usb-storage 4-1:1.0: usb_probe_interface - got id [ 2.005052] usb-storage 4-1:1.0: USB Mass Storage device detected [ 2.005489] scsi6 : usb-storage 4-1:1.0 [ 2.005758] usbcore: registered new interface driver usb-storage [ 2.016491] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1) [ 2.016685] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0000 [ 2.016737] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s [ 2.037612] hidraw: raw HID events driver (C) Jiri Kosina [ 2.040274] usbhid 1-1.2:1.0: usb_probe_interface [ 2.040278] usbhid 1-1.2:1.0: usb_probe_interface - got id [ 2.043272] usbcore: registered new interface driver usbhid [ 2.043317] usbhid: USB HID core driver [ 2.062194] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 [ 2.062505] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0 [ 2.087837] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 2.184410] usb 2-1.5: udev 3, busnum 2, minor = 130 [ 2.184420] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189 [ 2.184491] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.184877] usb 2-1.5: usb_probe_device [ 2.184883] usb 2-1.5: configuration #1 chosen from 1 choice [ 2.185449] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0) [ 2.185910] usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1) [ 2.186528] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0010 [ 2.186652] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0020 [ 2.407538] Switched to clocksource tsc [ 2.832990] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 3.003483] scsi 6:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6 [ 3.004136] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.004413] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.004941] sd 6:0:0:0: [sdc] Write Protect is off [ 3.005012] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 3.005550] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.007526] sdc: sdc1 sdc2 sdc3 [ 3.009648] sd 6:0:0:0: [sdc] Attached SCSI disk [ 25.976951] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k FS [ 26.005926] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro [ 26.039712] udevd[611]: starting version 175 [ 26.154993] lp: driver loaded but no devices found [ 26.218131] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251) [ 26.218142] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 26.218148] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251) [ 26.218154] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 26.218157] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251) [ 26.218162] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 26.218164] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251) [ 26.218169] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 26.218172] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 26.293190] cfg80211: Calling CRDA to update world regulatory domain [ 26.337441] wmi: Mapper loaded [ 26.361017] [drm] Initialized drm 1.1.0 20060810 [ 26.576556] cfg80211: World regulatory domain updated: [ 26.576561] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 26.576563] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.576565] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 26.576566] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 26.576568] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.576569] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.598130] Bluetooth: Core ver 2.16 [ 26.598182] NET: Registered protocol family 31 [ 26.598185] Bluetooth: HCI device and connection manager initialized [ 26.598201] Bluetooth: HCI socket layer initialized [ 26.598213] Bluetooth: L2CAP socket layer initialized [ 26.598236] Bluetooth: SCO socket layer initialized [ 26.618600] samsung_laptop: detected SABI interface: SwSmi@ [ 26.618605] samsung_laptop: Backlight controlled by ACPI video driver [ 26.663400] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 26.663405] Copyright(c) 2003-2013 Intel Corporation [ 26.663497] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 26.663985] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X [ 26.673111] ppdev: user-space parallel port driver [ 26.695769] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 26.695775] Bluetooth: BNEP filters: protocol multicast [ 26.695793] Bluetooth: BNEP socket layer initialized [ 26.699761] Linux video capture interface: v2.00 [ 26.736365] Bluetooth: RFCOMM TTY layer initialized [ 26.736393] Bluetooth: RFCOMM socket layer initialized [ 26.736396] Bluetooth: RFCOMM ver 1.11 [ 26.759179] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 26.759901] btusb 2-1.5:1.0: usb_probe_interface [ 26.759906] btusb 2-1.5:1.0: usb_probe_interface - got id [ 26.768336] usbcore: registered new interface driver btusb [ 26.769654] usb 2-1.5: link qh1-0e01/ffff880118010ac0 start 0 [1/2 us] [ 26.979174] [drm:i915_dump_device_info], i915 device info: gen=6, pciid=0x0116 flags=is_mobile,need_gfx_hws,has_force_wake,has_fbc,has_hotplug,has_bsd_ring,has_blt_ring,has_llc, [ 26.979908] [drm] Memory usable by graphics device = 2048M [ 26.979913] [drm:i915_gem_gtt_init], GMADR size = 256M [ 26.979916] [drm:i915_gem_gtt_init], GTT stolen size = 64M [ 26.979924] i915 0000:00:02.0: setting latency timer to 64 [ 27.027907] [drm:intel_detect_pch], Found CougarPoint PCH [ 27.028547] [drm:intel_opregion_setup], graphic opregion physical addr: 0xdaf1f018 [ 27.028566] [drm:intel_opregion_setup], Public ACPI methods supported [ 27.028568] [drm:intel_opregion_setup], SWSCI supported [ 27.028571] [drm:intel_opregion_setup], ASLE supported [ 27.028640] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 27.028659] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 27.028661] [drm] Driver supports precise vblank timestamp query. [ 27.028663] [drm:init_vbt_defaults], Set default to SSC at 100MHz [ 27.028667] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-M d [ 27.028670] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 27.028674] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 27.028680] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 27.028683] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 0 70700 1366 1414 1446 1486 768 770 775 792 0x8 0xa [ 27.028688] [drm:parse_lfp_panel_data], VBT initial LVDS value 300300 [ 27.028693] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 27.028695] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 27.028700] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 27.028712] [drm:intel_dsm_pci_probe], no _DSM method for intel device [ 27.028721] [drm:i915_gem_init_stolen], found 67108864 bytes of stolen memory at dba00000 [ 27.028825] [drm:intel_print_wm_latency], Primary WM0 latency 7 (0.7 usec) [ 27.028829] [drm:intel_print_wm_latency], Primary WM1 latency 3 (1.5 usec) [ 27.028832] [drm:intel_print_wm_latency], Primary WM2 latency 4 (2.0 usec) [ 27.028834] [drm:intel_print_wm_latency], Primary WM3 latency 22 (11.0 usec) [ 27.028837] [drm:intel_print_wm_latency], Sprite WM0 latency 7 (0.7 usec) [ 27.028840] [drm:intel_print_wm_latency], Sprite WM1 latency 3 (1.5 usec) [ 27.028843] [drm:intel_print_wm_latency], Sprite WM2 latency 4 (2.0 usec) [ 27.028846] [drm:intel_print_wm_latency], Sprite WM3 latency 22 (11.0 usec) [ 27.028849] [drm:intel_print_wm_latency], Cursor WM0 latency 7 (0.7 usec) [ 27.028851] [drm:intel_print_wm_latency], Cursor WM1 latency 3 (1.5 usec) [ 27.028854] [drm:intel_print_wm_latency], Cursor WM2 latency 4 (2.0 usec) [ 27.028857] [drm:intel_print_wm_latency], Cursor WM3 latency 22 (11.0 usec) [ 27.028861] [drm:intel_modeset_init], 2 display pipes available. [ 27.029088] [drm:intel_shared_dpll_init], 2 shared PLLs initialized [ 27.029094] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 27.029579] [drm:gmbus_xfer], GMBUS [i915 gmbus panel] NAK for addr: 0050 r(1) [ 27.029584] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus panel [ 27.029587] [drm:intel_lvds_init], using mode from VBT: [ 27.029590] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 0 70700 1366 1414 1446 1486 768 770 775 792 0x8 0xa [ 27.029599] [drm:intel_lvds_init], detected single-link lvds configuration [ 27.029743] [drm:intel_panel_get_backlight], get backlight PWM = 4648 [ 27.029748] [drm:intel_panel_get_max_backlight], max backlight PWM = 4648 [ 27.030074] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 27.030517] [drm:intel_sdvo_read_byte], i2c transfer returned -6 [ 27.030521] [drm:intel_sdvo_init], No SDVO device found on SDVOB [ 27.030620] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 27.030820] [drm:intel_dp_init_connector], Adding DP connector on port B [ 27.030940] [drm:intel_dp_i2c_init], i2c_init DPDDC-B [ 27.035580] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f [ 27.035593] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 27.038033] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f [ 27.038045] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 27.038148] [drm:ironlake_init_pch_refclk], has_panel 1 has_lvds 1 has_ck505 0 [ 27.038153] [drm:ironlake_init_pch_refclk], Using SSC on panel [ 27.038683] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fdff000] [ 27.042544] [drm:init_status_page], render ring hws offset: 0x00000000 [ 27.043027] [drm:init_pipe_control], render ring pipe control offset: 0x00021000 [ 27.043048] [drm:init_status_page], bsd ring hws offset: 0x00022000 [ 27.043277] [drm:init_status_page], blitter ring hws offset: 0x00043000 [ 27.043516] [drm:create_default_context], Default HW context loaded [ 27.043519] [drm:i915_gem_context_init], HW context support initialized [ 27.043560] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 27.043563] [drm] This can cause pipe underruns and display issues. [ 27.043565] [drm] Please upgrade your BIOS to fix this. [ 27.043579] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled [ 27.043583] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled [ 27.043588] [drm:intel_modeset_readout_hw_state], PCH DPLL A hw state readout: refcount 1, on 1 [ 27.043593] [drm:intel_modeset_readout_hw_state], PCH DPLL B hw state readout: refcount 0, on 0 [ 27.043599] [drm:intel_modeset_readout_hw_state], [ENCODER:8:LVDS-8] hw state readout: enabled, pipe=0 [ 27.043604] [drm:intel_modeset_readout_hw_state], [ENCODER:12:DAC-12] hw state readout: disabled, pipe=0 [ 27.043609] [drm:intel_modeset_readout_hw_state], [ENCODER:13:TMDS-13] hw state readout: disabled, pipe=0 [ 27.043613] [drm:intel_modeset_readout_hw_state], [ENCODER:17:TMDS-17] hw state readout: disabled, pipe=0 [ 27.043619] [drm:intel_modeset_readout_hw_state], [CONNECTOR:7:LVDS-1] hw state readout: enabled [ 27.043623] [drm:intel_modeset_readout_hw_state], [CONNECTOR:11:VGA-1] hw state readout: disabled [ 27.043628] [drm:intel_modeset_readout_hw_state], [CONNECTOR:14:HDMI-A-1] hw state readout: disabled [ 27.043632] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:DP-1] hw state readout: disabled [ 27.043636] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A [ 27.043640] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 27.043642] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 27.043645] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 4, gmch_m: 1647429, gmch_n: 8388608, link_m: 137285, link_n: 524288, tu: 64 [ 27.043648] [drm:intel_dump_pipe_config], requested mode: [ 27.043651] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0 [ 27.043655] [drm:intel_dump_pipe_config], adjusted mode: [ 27.043658] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 70699 0 0 0 0 0 0 0 0 0x0 0xa [ 27.043662] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 27.043665] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x05560300 [ 27.043668] [drm:intel_dump_pipe_config], ips: 0 [ 27.043671] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B [ 27.043674] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 27.043676] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 27.043679] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 27.043682] [drm:intel_dump_pipe_config], requested mode: [ 27.043684] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 27.043688] [drm:intel_dump_pipe_config], adjusted mode: [ 27.043690] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 27.043694] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 27.043697] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000 [ 27.043700] [drm:intel_dump_pipe_config], ips: 0 [ 27.043704] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1] [ 27.043710] [drm:check_encoder_state], [ENCODER:8:LVDS-8] [ 27.043714] [drm:check_encoder_state], [ENCODER:12:DAC-12] [ 27.043718] [drm:check_encoder_state], [ENCODER:13:TMDS-13] [ 27.043721] [drm:check_encoder_state], [ENCODER:17:TMDS-17] [ 27.043725] [drm:check_crtc_state], [CRTC:3] [ 27.043739] [drm:check_crtc_state], [CRTC:5] [ 27.043742] [drm:check_shared_dpll_state], PCH DPLL A [ 27.043747] [drm:check_shared_dpll_state], PCH DPLL B [ 27.043756] [drm:intel_crt_reset], pch crt adpa set to 0xf40000 [ 27.043774] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 27.043777] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1] [ 27.043786] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 27.043789] [drm:drm_mode_debug_printmodeline], Modeline 19:"1366x768" 60 70700 1366 1414 1446 1486 768 770 775 792 0x8 0xa [ 27.043794] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 27.043797] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 27.043802] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 27.055235] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 27.055240] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 27.055244] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 27.055246] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P enabled [ 27.055250] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 27.056383] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 27.058018] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 27.058024] [drm:intel_crt_detect], CRT not detected via hotplug [ 27.058244] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 27.058249] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 27.058252] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 27.058255] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 27.059119] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 27.059122] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 27.059125] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 27.059128] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 27.059133] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 27.059137] [drm:intel_hdmi_detect], [CONNECTOR:14:HDMI-A-1] [ 27.059307] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 27.059311] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 27.059315] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected [ 27.059318] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 27.059322] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 27.059337] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 27.059340] [drm:drm_setup_crtcs], [ 27.059344] [drm:drm_enable_connectors], connector 7 enabled? yes [ 27.059346] [drm:drm_enable_connectors], connector 11 enabled? no [ 27.059349] [drm:drm_enable_connectors], connector 14 enabled? no [ 27.059351] [drm:drm_enable_connectors], connector 18 enabled? no [ 27.059354] [drm:drm_target_preferred], looking for cmdline mode on connector 7 [ 27.059357] [drm:drm_target_preferred], looking for preferred mode on connector 7 [ 27.059359] [drm:drm_target_preferred], found mode 1366x768 [ 27.059362] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 27.059366] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3 [ 27.059373] [drm:i915_gem_object_create_stolen], creating stolen object: size=408000 [ 27.059380] [drm:i915_pages_create_for_stolen], offset=0x0, size=4227072 [ 27.059386] ------------[ cut here ]------------ [ 27.059417] WARNING: CPU: 3 PID: 632 at drivers/gpu/drm/i915/i915_gem.c:3428 i915_gem_object_set_cache_level+0x389/0x3a0 [i915]() [ 27.059419] Modules linked in: iwldvm(+) i915(+) videobuf2_vmalloc snd_page_alloc mac80211 snd_seq_midi videobuf2_memops snd_seq_midi_event videobuf2_core snd_rawmidi parport_pc btusb rfcomm videodev bnep ppdev iwlwifi snd_seq psmouse i2c_algo_bit samsung_laptop bluetooth drm_kms_helper snd_timer drm snd_seq_device wmi serio_raw video cfg80211 snd mac_hid lpc_ich soundcore lp parport hid_generic usbhid hid usb_storage r8169 mii [ 27.059465] CPU: 3 PID: 632 Comm: modprobe Not tainted 3.11.0-rc5-2-din-small #1 [ 27.059467] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 27.059470] 0000000000000d64 ffff880086291588 ffffffff816dd12e 0000000000002258 [ 27.059476] 0000000000000000 ffff8800862915c8 ffffffff810651cc ffffffff81372520 [ 27.059480] ffff880080649200 ffff8800806492b8 ffff880081df4800 0000000000000041 [ 27.059485] Call Trace: [ 27.059493] [] dump_stack+0x46/0x58 [ 27.059500] [] warn_slowpath_common+0x8c/0xc0 [ 27.059506] [] ? sg_kfree+0x30/0x30 [ 27.059511] [] warn_slowpath_null+0x1a/0x20 [ 27.059533] [] i915_gem_object_set_cache_level+0x389/0x3a0 [i915] [ 27.059538] [] ? sg_alloc_table+0x1f/0x50 [ 27.059543] [] ? debug_mutex_add_waiter+0x29/0x80 [ 27.059563] [] i915_gem_object_pin_to_display_plane+0x62/0x1b0 [i915] [ 27.059587] [] intel_pin_and_fence_fb_obj+0xc0/0x140 [i915] [ 27.059592] [] ? mutex_lock+0x1e/0x40 [ 27.059621] [] intelfb_create+0x107/0x510 [i915] [ 27.059638] [] ? drm_mode_create+0x47/0x70 [drm] [ 27.059645] [] drm_fb_helper_initial_config+0x2fe/0x550 [drm_kms_helper] [ 27.059673] [] ? i915_write32+0xc3/0x190 [i915] [ 27.059697] [] intel_fbdev_initial_config+0x21/0x30 [i915] [ 27.059718] [] i915_driver_load+0xe9d/0xed0 [i915] [ 27.059734] [] drm_get_pci_dev+0x181/0x2a0 [drm] [ 27.059739] [] ? do_raw_spin_unlock+0x5d/0xb0 [ 27.059758] [] i915_pci_probe+0x36/0x70 [i915] [ 27.059764] [] local_pci_probe+0x4b/0x80 [ 27.059768] [] pci_device_probe+0x101/0x120 [ 27.059775] [] driver_probe_device+0x7b/0x240 [ 27.059780] [] __driver_attach+0xab/0xb0 [ 27.059785] [] ? driver_probe_device+0x240/0x240 [ 27.059789] [] bus_for_each_dev+0x5e/0x90 [ 27.059794] [] driver_attach+0x1e/0x20 [ 27.059799] [] bus_add_driver+0x104/0x270 [ 27.059804] [] driver_register+0x7d/0x160 [ 27.059809] [] __pci_register_driver+0x64/0x70 [ 27.059814] [] ? 0xffffffffa0324fff [ 27.059825] [] drm_pci_init+0x11a/0x130 [drm] [ 27.059830] [] ? 0xffffffffa0324fff [ 27.059848] [] i915_init+0x66/0x68 [i915] [ 27.059852] [] do_one_initcall+0x4e/0x180 [ 27.059857] [] ? set_memory_nx+0x43/0x50 [ 27.059863] [] load_module+0x209c/0x25b0 [ 27.059867] [] ? show_initstate+0x50/0x50 [ 27.059873] [] SyS_init_module+0xac/0xd0 [ 27.059878] [] tracesys+0xe1/0xe6 [ 27.059881] ---[ end trace 8f51a33d86c7bd4d ]--- [ 27.061281] [drm:intelfb_create], allocated 1366x768 fb: 0x00072000, bo ffff880080649200 [ 27.061616] fbcon: inteldrmfb (fb0) is primary device [ 27.063075] [drm:intel_crtc_set_config], [CRTC:3] [FB:21] #connectors=1 (x y) (0 0) [ 27.063078] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set [ 27.063080] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 27.063084] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 27.063087] [drm:drm_mode_debug_printmodeline], Modeline 20:"1366x768" 60 70700 1366 1414 1446 1486 768 770 775 792 0x8 0xa [ 27.063090] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 27.063095] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 27.063101] [drm:connected_sink_compute_bpp], [CONNECTOR:7:LVDS-1] checking for sink bpp constrains [ 27.063106] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe A, lanes 1 [ 27.063107] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 27.063110] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A [ 27.063111] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 27.063112] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 27.063115] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 1, gmch_m: 3294858, gmch_n: 4194304, link_m: 137285, link_n: 524288, tu: 64 [ 27.063116] [drm:intel_dump_pipe_config], requested mode: [ 27.063120] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 70700 1366 1414 1446 1486 768 770 775 792 0x8 0xa [ 27.063121] [drm:intel_dump_pipe_config], adjusted mode: [ 27.063124] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 70700 1366 1414 1446 1486 768 770 775 792 0x8 0xa [ 27.063126] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 27.063128] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000 [ 27.063129] [drm:intel_dump_pipe_config], ips: 0 [ 27.063132] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 27.084683] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 27.109599] uvcvideo 1-1.4:1.0: usb_probe_interface [ 27.109603] uvcvideo 1-1.4:1.0: usb_probe_interface - got id [ 27.109654] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018) [ 27.131922] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input5 [ 27.134614] usbcore: registered new interface driver uvcvideo [ 27.134615] USB Video Class driver (1.1.1) [ 27.154716] usb 1-1.4: link qh16-0001/ffff88008131e5c0 start 2 [1/0 us] [ 27.155204] usb 1-1.4: unlink qh16-0001/ffff88008131e5c0 start 2 [1/0 us] [ 27.373037] type=1400 audit(1376425290.291:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=797 comm="apparmor_parser" [ 27.373358] type=1400 audit(1376425290.291:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=797 comm="apparmor_parser" [ 27.373656] type=1400 audit(1376425290.291:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=797 comm="apparmor_parser" [ 27.453832] type=1400 audit(1376425290.375:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=870 comm="apparmor_parser" [ 27.454030] type=1400 audit(1376425290.375:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=870 comm="apparmor_parser" [ 27.454201] type=1400 audit(1376425290.375:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=870 comm="apparmor_parser" [ 27.574255] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00) [ 27.589279] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c. [ 27.625547] [drm:intel_disable_shared_dpll], disable PCH DPLL A (active 1, on? 1) for crtc 3 [ 27.625552] [drm:intel_disable_shared_dpll], disabling PCH DPLL A [ 27.625960] [drm:intel_update_fbc], no output, disabling [ 27.625967] [drm:ironlake_get_refclk], using SSC reference clock of 120 MHz [ 27.626001] [drm:intel_get_shared_dpll], CRTC:3 dropping existing PCH DPLL A [ 27.626003] [drm:intel_get_shared_dpll], CRTC:3 allocated PCH DPLL A [ 27.626004] [drm:intel_get_shared_dpll], using PCH DPLL A for pipe A [ 27.626005] [drm:intel_get_shared_dpll], setting up PCH DPLL A [ 27.626019] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 5504 [ 27.626025] [drm:intel_crtc_mode_set], [ENCODER:8:LVDS-8] set [MODE:0:1366x768] [ 27.626028] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 27.626031] [drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6 [ 27.626033] [drm:ironlake_check_srwm], watermark 2: display plane 11, fbc lines 3, cursor 6 [ 27.626036] [drm:ironlake_check_srwm], watermark 3: display plane 51, fbc lines 3, cursor 6 [ 27.664852] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 [ 27.689502] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 27.753452] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 27.754258] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x700 [ 27.754260] [drm:gen6_fdi_link_train], FDI train 1 done. [ 27.754909] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 27.754912] [drm:gen6_fdi_link_train], FDI train 2 done. [ 27.754913] [drm:gen6_fdi_link_train], FDI train done. [ 27.754917] [drm:ironlake_enable_shared_dpll], enable PCH DPLL A (active 0, on? 0)for crtc 3 [ 27.754919] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL A [ 27.756281] [drm:intel_update_fbc], disabled per chip default [ 27.762988] type=1400 audit(1376425290.683:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1001 comm="apparmor_parser" [ 27.763322] type=1400 audit(1376425290.683:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1001 comm="apparmor_parser" [ 27.763631] type=1400 audit(1376425290.683:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1001 comm="apparmor_parser" [ 27.784368] type=1400 audit(1376425290.703:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=958 comm="apparmor_parser" [ 28.009279] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4648 [ 28.025268] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1] [ 28.025276] [drm:check_encoder_state], [ENCODER:8:LVDS-8] [ 28.025278] [drm:check_encoder_state], [ENCODER:12:DAC-12] [ 28.025280] [drm:check_encoder_state], [ENCODER:13:TMDS-13] [ 28.025283] [drm:check_encoder_state], [ENCODER:17:TMDS-17] [ 28.025285] [drm:check_crtc_state], [CRTC:3] [ 28.025297] [drm:check_crtc_state], [CRTC:5] [ 28.025299] [drm:check_shared_dpll_state], PCH DPLL A [ 28.025303] [drm:check_shared_dpll_state], PCH DPLL B [ 28.025308] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 28.025312] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 28.025359] [drm:intel_crtc_set_config], [CRTC:3] [FB:21] #connectors=1 (x y) (0 0) [ 28.025362] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 28.028185] Console: switching to colour frame buffer device 170x48 [ 28.028189] [drm:intel_crtc_set_config], [CRTC:3] [FB:21] #connectors=1 (x y) (0 0) [ 28.028191] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 28.030852] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 28.030854] i915 0000:00:02.0: registered panic notifier [ 28.052451] [drm:asle_set_backlight], bclp = 0x80000019 [ 28.052459] [drm:intel_panel_get_max_backlight], max backlight PWM = 4648 [ 28.052462] [drm:intel_panel_actually_set_backlight], set backlight PWM = 450 [ 28.052597] [drm:asle_set_backlight], bclp = 0x800000ff [ 28.052602] [drm:intel_panel_get_max_backlight], max backlight PWM = 4648 [ 28.052605] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4590 [ 28.052778] acpi device:33: registered as cooling_device9 [ 28.053306] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 28.053425] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 28.053749] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 28.054681] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 28.101498] init: failsafe main process (1016) killed by TERM signal [ 28.142328] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 28.142747] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 28.143144] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 28.157804] [drm:i915_driver_open], [ 28.157837] [drm:intel_crtc_cursor_set], cursor off [ 28.157841] [drm:intel_crtc_set_config], [CRTC:3] [FB:21] #connectors=1 (x y) (0 0) [ 28.157848] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 28.157853] [drm:intel_crtc_cursor_set], cursor off [ 28.157856] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 28.157860] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 28.157918] [drm:i915_driver_open], [ 28.157937] [drm:intel_crtc_cursor_set], cursor off [ 28.157939] [drm:intel_crtc_set_config], [CRTC:3] [FB:21] #connectors=1 (x y) (0 0) [ 28.157944] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 28.157948] [drm:intel_crtc_cursor_set], cursor off [ 28.157950] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 28.157954] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 28.158008] [drm:i915_driver_open], [ 28.158153] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4] [ 28.158160] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4] [ 28.158169] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 28.158173] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 28.158177] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1] [ 28.158186] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 28.158189] [drm:drm_mode_debug_printmodeline], Modeline 19:"1366x768" 60 70700 1366 1414 1446 1486 768 770 775 792 0x8 0xa [ 28.158196] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 28.163760] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 28.163768] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 28.163771] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 28.163776] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 28.163779] [drm:intel_crt_detect], CRT not detected via hotplug [ 28.167230] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 28.167239] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 28.167243] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 28.167245] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 28.167591] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 28.167594] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 28.167597] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 28.167600] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 28.167613] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 28.167618] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 28.167621] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 28.167624] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 28.167627] [drm:intel_crt_detect], CRT not detected via hotplug [ 28.167952] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 28.167956] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 28.167959] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 28.167961] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 28.168311] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 28.168314] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 28.168317] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 28.168320] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 28.168334] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 28.168338] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 28.168341] [drm:intel_hdmi_detect], [CONNECTOR:14:HDMI-A-1] [ 28.168571] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 28.168576] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 28.168580] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected [ 28.168587] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 28.168590] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 28.168592] [drm:intel_hdmi_detect], [CONNECTOR:14:HDMI-A-1] [ 28.169566] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 28.169572] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 28.169576] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected [ 28.169588] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 28.169592] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 28.169594] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 28.169598] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 28.169602] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 28.169605] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 28.169607] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 28.169611] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 28.172030] [drm:intel_crtc_set_config], [CRTC:3] [FB:21] #connectors=1 (x y) (0 0) [ 28.172036] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 28.226478] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 28.233187] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 28.505949] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 28.512639] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 28.590424] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 28.769087] [drm:intel_enable_rc6], Sandybridge: deep RC6 disabled [ 28.769094] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 29.768148] usb 1-1.4: usb auto-suspend, wakeup 0 [ 34.896251] wlan0: authenticate with 00:04:0e:e4:00:3d [ 34.901224] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 34.912130] wlan0: authenticated [ 34.912312] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 34.912317] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 34.912408] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 34.916581] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 34.929043] wlan0: associated [ 34.929142] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 35.349177] audit_printk_skb: 33 callbacks suppressed [ 35.349181] type=1400 audit(1376425298.275:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1167 comm="apparmor_parser" [ 35.350082] type=1400 audit(1376425298.275:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1167 comm="apparmor_parser" [ 35.350432] type=1400 audit(1376425298.275:25): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1167 comm="apparmor_parser" [ 35.351218] type=1400 audit(1376425298.275:26): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1167 comm="apparmor_parser" [ 35.351848] type=1400 audit(1376425298.275:27): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=1167 comm="apparmor_parser" [ 35.352199] type=1400 audit(1376425298.279:28): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=1167 comm="apparmor_parser" [ 35.353058] type=1400 audit(1376425298.279:29): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1167 comm="apparmor_parser" [ 35.353535] type=1400 audit(1376425298.279:30): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=1167 comm="apparmor_parser" [ 35.467013] init: alsa-restore main process (1220) terminated with status 99 [ 35.564796] [drm:i915_driver_open], [ 35.564971] [drm:i915_driver_open], [ 35.565083] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4] [ 35.566485] [drm:i915_driver_open], [ 35.566641] [drm:i915_driver_open], [ 35.567088] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4] [ 35.567098] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4] [ 35.567166] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 35.567171] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 35.567175] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1] [ 35.567184] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 35.567187] [drm:drm_mode_debug_printmodeline], Modeline 19:"1366x768" 60 70700 1366 1414 1446 1486 768 770 775 792 0x8 0xa [ 35.567195] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 35.567665] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 35.567670] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 35.567673] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 35.567678] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 35.567681] [drm:intel_crt_detect], CRT not detected via hotplug [ 35.567878] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 35.567883] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 35.567886] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 35.567888] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 35.568331] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 35.568333] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 35.568335] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 35.568337] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 35.568346] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 35.568349] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 35.568351] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 35.568354] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 35.568356] [drm:intel_crt_detect], CRT not detected via hotplug [ 35.568540] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 35.568546] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 35.568548] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 35.568549] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 35.568895] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 35.568896] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 35.568898] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 35.568900] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 35.568987] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 35.568995] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 35.568998] [drm:intel_hdmi_detect], [CONNECTOR:14:HDMI-A-1] [ 35.569188] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 35.569193] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 35.569196] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected [ 35.569203] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 35.569206] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 35.569208] [drm:intel_hdmi_detect], [CONNECTOR:14:HDMI-A-1] [ 35.569397] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 35.569403] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 35.569406] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected [ 35.569450] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 35.569453] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 35.569455] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 35.569458] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 35.569462] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 35.569464] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 35.569465] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 35.569467] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 35.569515] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 35.569518] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 35.569520] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1] [ 35.569526] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 35.569528] [drm:drm_mode_debug_printmodeline], Modeline 19:"1366x768" 60 70700 1366 1414 1446 1486 768 770 775 792 0x8 0xa [ 35.569533] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 35.570040] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 35.570043] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 35.570046] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 35.570049] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 35.570051] [drm:intel_crt_detect], CRT not detected via hotplug [ 35.570225] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 35.570228] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 35.570230] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 35.570232] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 35.570572] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 35.570574] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 35.570576] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 35.570578] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 35.570584] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 35.570586] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 35.570588] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 35.570590] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 35.570592] [drm:intel_crt_detect], CRT not detected via hotplug [ 35.570759] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 35.570761] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 35.570763] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 35.570764] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 35.571103] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 35.571105] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 35.571106] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 35.571108] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 35.571141] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 35.571143] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 35.571145] [drm:intel_hdmi_detect], [CONNECTOR:14:HDMI-A-1] [ 35.571315] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 35.571319] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 35.571322] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected [ 35.571330] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 35.571333] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 35.571336] [drm:intel_hdmi_detect], [CONNECTOR:14:HDMI-A-1] [ 35.571495] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 35.571499] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 35.571503] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected [ 35.571537] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 35.571540] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 35.571542] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 35.571545] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 35.571550] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 35.571552] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 35.571555] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 35.571558] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 35.576135] [drm:asle_set_backlight], bclp = 0x800000ff [ 35.576141] [drm:intel_panel_get_max_backlight], max backlight PWM = 4648 [ 35.576143] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4590 [ 35.576364] [drm:asle_set_backlight], bclp = 0x800000ff [ 35.576368] [drm:intel_panel_get_max_backlight], max backlight PWM = 4648 [ 35.576369] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4590 [ 35.576791] [drm:drm_mode_addfb], [FB:22] [ 35.576853] [drm:drm_mode_setcrtc], [CRTC:3] [ 35.576859] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1] [ 35.576861] [drm:intel_crtc_set_config], [CRTC:3] [FB:22] #connectors=1 (x y) (0 0) [ 35.576866] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 35.581111] [drm:ironlake_update_plane], Writing base 0047A000 00000000 0 0 5632 [ 35.595971] [drm:drm_mode_setcrtc], [CRTC:5] [ 35.595977] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 35.595981] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 35.625958] usb 1-1.2: link qh8-0e01/ffff880086a8bc40 start 3 [1/2 us] [ 35.952643] init: plymouth-stop pre-start process (1465) terminated with status 1 [ 37.118894] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 37.118903] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 37.118907] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1] [ 37.118918] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 37.118922] [drm:drm_mode_debug_printmodeline], Modeline 19:"1366x768" 60 70700 1366 1414 1446 1486 768 770 775 792 0x8 0xa [ 37.118931] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 37.119159] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 37.119164] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 37.119168] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 37.119173] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 37.119176] [drm:intel_crt_detect], CRT not detected via hotplug [ 37.119340] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 37.119346] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 37.119349] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 37.119351] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 37.119698] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 37.119702] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 37.119705] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 37.119708] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 37.119718] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 37.119721] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 37.119723] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 37.119727] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 37.119729] [drm:intel_crt_detect], CRT not detected via hotplug [ 37.119889] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 37.119894] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 37.119897] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 37.119899] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 37.120250] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 37.120253] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 37.120256] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 37.120260] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 37.120272] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 37.120277] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 37.120280] [drm:intel_hdmi_detect], [CONNECTOR:14:HDMI-A-1] [ 37.120439] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 37.120444] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 37.120447] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected [ 37.120455] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 37.120459] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 37.120462] [drm:intel_hdmi_detect], [CONNECTOR:14:HDMI-A-1] [ 37.120617] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 37.120620] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 37.120622] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected [ 37.120632] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 37.120634] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 37.120636] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 37.120640] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 37.120643] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 37.120645] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 37.120646] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 37.120648] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 37.403731] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 37.403774] [drm:intel_hdmi_detect], [CONNECTOR:14:HDMI-A-1] [ 37.403967] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 37.403978] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 37.404063] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1] [ 37.404105] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 37.404108] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 37.404110] [drm:intel_crt_detect], CRT not detected via hotplug [ 37.404284] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 37.404290] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 37.404295] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 37.404298] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 37.404654] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 37.404655] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 37.404657] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 37.601266] usb usb3: usb auto-resume [ 37.601289] hub 3-0:1.0: hub_resume [ 37.601315] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.601336] hub 3-0:1.0: hub_suspend [ 37.601343] usb usb3: bus auto-suspend, wakeup 1 [ 37.601408] usb usb3: usb auto-resume [ 37.610483] hub 3-0:1.0: hub_resume [ 37.610541] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.610558] hub 3-0:1.0: hub_suspend [ 37.610563] usb usb3: bus auto-suspend, wakeup 1 [ 37.611186] usb 1-1.4: usb auto-resume [ 37.658540] usb 1-1.4: finish resume [ 37.665153] usb usb3: usb auto-resume [ 37.665173] hub 3-0:1.0: hub_resume [ 37.665202] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.665220] hub 3-0:1.0: hub_suspend [ 37.665225] usb usb3: bus auto-suspend, wakeup 1 [ 37.665251] usb usb3: usb auto-resume [ 37.674468] hub 3-0:1.0: hub_resume [ 37.674495] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.674512] hub 3-0:1.0: hub_suspend [ 37.674518] usb usb3: bus auto-suspend, wakeup 1 [ 37.675570] usb usb3: usb auto-resume [ 37.686488] hub 3-0:1.0: hub_resume [ 37.686517] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.686542] hub 3-0:1.0: hub_suspend [ 37.686548] usb usb3: bus auto-suspend, wakeup 1 [ 37.686607] usb usb3: usb auto-resume [ 37.698424] hub 3-0:1.0: hub_resume [ 37.698451] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.698471] hub 3-0:1.0: hub_suspend [ 37.698479] usb usb3: bus auto-suspend, wakeup 1 [ 37.705600] usb usb3: usb auto-resume [ 37.714566] hub 3-0:1.0: hub_resume [ 37.714597] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.714634] hub 3-0:1.0: hub_suspend [ 37.714643] usb usb3: bus auto-suspend, wakeup 1 [ 37.714708] usb usb3: usb auto-resume [ 37.726405] hub 3-0:1.0: hub_resume [ 37.726432] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.726442] hub 3-0:1.0: hub_suspend [ 37.726451] usb usb3: bus auto-suspend, wakeup 1 [ 37.739041] usb usb3: usb auto-resume [ 37.739062] hub 3-0:1.0: hub_resume [ 37.739088] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.739112] hub 3-0:1.0: hub_suspend [ 37.739119] usb usb3: bus auto-suspend, wakeup 1 [ 37.739166] usb usb3: usb auto-resume [ 37.750515] hub 3-0:1.0: hub_resume [ 37.750545] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.750575] hub 3-0:1.0: hub_suspend [ 37.750583] usb usb3: bus auto-suspend, wakeup 1 [ 37.753083] usb usb3: usb auto-resume [ 37.762490] hub 3-0:1.0: hub_resume [ 37.762530] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.762561] hub 3-0:1.0: hub_suspend [ 37.762567] usb usb3: bus auto-suspend, wakeup 1 [ 37.762651] usb usb3: usb auto-resume [ 37.774395] hub 3-0:1.0: hub_resume [ 37.774423] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.774442] hub 3-0:1.0: hub_suspend [ 37.774448] usb usb3: bus auto-suspend, wakeup 1 [ 37.775521] usb usb3: usb auto-resume [ 37.786426] hub 3-0:1.0: hub_resume [ 37.786483] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.786499] hub 3-0:1.0: hub_suspend [ 37.786505] usb usb3: bus auto-suspend, wakeup 1 [ 37.786530] usb usb3: usb auto-resume [ 37.798408] hub 3-0:1.0: hub_resume [ 37.798461] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.798480] hub 3-0:1.0: hub_suspend [ 37.798488] usb usb3: bus auto-suspend, wakeup 1 [ 37.804395] usb usb3: usb auto-resume [ 37.814488] hub 3-0:1.0: hub_resume [ 37.814577] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.814629] hub 3-0:1.0: hub_suspend [ 37.814640] usb usb3: bus auto-suspend, wakeup 1 [ 37.814705] usb usb3: usb auto-resume [ 37.826423] hub 3-0:1.0: hub_resume [ 37.826511] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.826542] hub 3-0:1.0: hub_suspend [ 37.826550] usb usb3: bus auto-suspend, wakeup 1 [ 37.827960] usb usb3: usb auto-resume [ 37.838365] hub 3-0:1.0: hub_resume [ 37.838417] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.838441] hub 3-0:1.0: hub_suspend [ 37.838453] usb usb3: bus auto-suspend, wakeup 1 [ 37.838562] usb usb3: usb auto-resume [ 37.850345] hub 3-0:1.0: hub_resume [ 37.850382] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.850398] hub 3-0:1.0: hub_suspend [ 37.850407] usb usb3: bus auto-suspend, wakeup 1 [ 37.854151] usb usb3: usb auto-resume [ 37.869090] hub 3-0:1.0: hub_resume [ 37.870193] [drm:i915_driver_open], [ 37.875428] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.875452] hub 3-0:1.0: hub_suspend [ 37.875461] usb usb3: bus auto-suspend, wakeup 1 [ 37.876465] [drm:i915_gem_context_create_ioctl], HW context 1 created [ 37.887010] [drm:i915_gem_context_destroy_ioctl], HW context 1 destroyed [ 38.876154] usb usb3: usb auto-resume [ 38.876179] hub 3-0:1.0: hub_resume [ 38.876241] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.876274] hub 3-0:1.0: hub_suspend [ 38.876281] usb usb3: bus auto-suspend, wakeup 1 [ 38.878224] usb usb3: usb auto-resume [ 38.889633] hub 3-0:1.0: hub_resume [ 38.889720] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.889744] hub 3-0:1.0: hub_suspend [ 38.889750] usb usb3: bus auto-suspend, wakeup 1 [ 38.889779] usb usb3: usb auto-resume [ 38.901616] hub 3-0:1.0: hub_resume [ 38.901713] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.901732] hub 3-0:1.0: hub_suspend [ 38.901739] usb usb3: bus auto-suspend, wakeup 1 [ 38.902896] usb usb3: usb auto-resume [ 38.913665] hub 3-0:1.0: hub_resume [ 38.913729] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.913747] hub 3-0:1.0: hub_suspend [ 38.913753] usb usb3: bus auto-suspend, wakeup 1 [ 38.913783] usb usb3: usb auto-resume [ 38.925591] hub 3-0:1.0: hub_resume [ 38.925645] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.925677] hub 3-0:1.0: hub_suspend [ 38.925684] usb usb3: bus auto-suspend, wakeup 1 [ 38.935527] usb usb3: usb auto-resume [ 38.945654] hub 3-0:1.0: hub_resume [ 38.945690] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.945724] hub 3-0:1.0: hub_suspend [ 38.945731] usb usb3: bus auto-suspend, wakeup 1 [ 38.945798] usb usb3: usb auto-resume [ 38.957544] hub 3-0:1.0: hub_resume [ 38.957583] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.957596] hub 3-0:1.0: hub_suspend [ 38.957605] usb usb3: bus auto-suspend, wakeup 1 [ 38.958688] usb usb3: usb auto-resume [ 38.969533] hub 3-0:1.0: hub_resume [ 38.969569] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.969596] hub 3-0:1.0: hub_suspend [ 38.969603] usb usb3: bus auto-suspend, wakeup 1 [ 38.969693] usb usb3: usb auto-resume [ 38.981546] hub 3-0:1.0: hub_resume [ 38.981575] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.981586] hub 3-0:1.0: hub_suspend [ 38.981593] usb usb3: bus auto-suspend, wakeup 1 [ 38.983000] usb usb3: usb auto-resume [ 38.993516] hub 3-0:1.0: hub_resume [ 38.993559] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.993595] hub 3-0:1.0: hub_suspend [ 38.993605] usb usb3: bus auto-suspend, wakeup 1 [ 38.993700] usb usb3: usb auto-resume [ 39.005515] hub 3-0:1.0: hub_resume [ 39.005564] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.005583] hub 3-0:1.0: hub_suspend [ 39.005593] usb usb3: bus auto-suspend, wakeup 1 [ 39.006860] usb usb3: usb auto-resume [ 39.017543] hub 3-0:1.0: hub_resume [ 39.017610] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.017643] hub 3-0:1.0: hub_suspend [ 39.017651] usb usb3: bus auto-suspend, wakeup 1 [ 39.017682] usb usb3: usb auto-resume [ 39.029489] hub 3-0:1.0: hub_resume [ 39.031815] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.031835] hub 3-0:1.0: hub_suspend [ 39.031843] usb usb3: bus auto-suspend, wakeup 1 [ 39.033091] usb usb3: usb auto-resume [ 39.041559] hub 3-0:1.0: hub_resume [ 39.041640] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.041659] hub 3-0:1.0: hub_suspend [ 39.041666] usb usb3: bus auto-suspend, wakeup 1 [ 39.041688] usb usb3: usb auto-resume [ 39.053517] hub 3-0:1.0: hub_resume [ 39.053593] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.053615] hub 3-0:1.0: hub_suspend [ 39.053622] usb usb3: bus auto-suspend, wakeup 1 [ 39.058023] usb usb3: usb auto-resume [ 39.069530] hub 3-0:1.0: hub_resume [ 39.069583] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.069629] hub 3-0:1.0: hub_suspend [ 39.069636] usb usb3: bus auto-suspend, wakeup 1 [ 39.069747] usb usb3: usb auto-resume [ 39.081504] hub 3-0:1.0: hub_resume [ 39.081564] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.081584] hub 3-0:1.0: hub_suspend [ 39.081591] usb usb3: bus auto-suspend, wakeup 1 [ 39.082718] usb usb3: usb auto-resume [ 39.093491] hub 3-0:1.0: hub_resume [ 39.093533] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.093577] hub 3-0:1.0: hub_suspend [ 39.093585] usb usb3: bus auto-suspend, wakeup 1 [ 39.093670] usb usb3: usb auto-resume [ 39.105491] hub 3-0:1.0: hub_resume [ 39.105588] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.105627] hub 3-0:1.0: hub_suspend [ 39.105635] usb usb3: bus auto-suspend, wakeup 1 [ 39.112406] usb usb3: usb auto-resume [ 39.121510] hub 3-0:1.0: hub_resume [ 39.121547] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.121588] hub 3-0:1.0: hub_suspend [ 39.121596] usb usb3: bus auto-suspend, wakeup 1 [ 39.121705] usb usb3: usb auto-resume [ 39.133470] hub 3-0:1.0: hub_resume [ 39.133522] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.133556] hub 3-0:1.0: hub_suspend [ 39.133564] usb usb3: bus auto-suspend, wakeup 1 [ 39.135107] usb usb3: usb auto-resume [ 39.145445] hub 3-0:1.0: hub_resume [ 39.145486] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.145543] hub 3-0:1.0: hub_suspend [ 39.145551] usb usb3: bus auto-suspend, wakeup 1 [ 39.145632] usb usb3: usb auto-resume [ 39.157439] hub 3-0:1.0: hub_resume [ 39.157483] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.157507] hub 3-0:1.0: hub_suspend [ 39.157517] usb usb3: bus auto-suspend, wakeup 1 [ 39.159216] usb usb3: usb auto-resume [ 39.169425] hub 3-0:1.0: hub_resume [ 39.169470] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.169522] hub 3-0:1.0: hub_suspend [ 39.169531] usb usb3: bus auto-suspend, wakeup 1 [ 39.169619] usb usb3: usb auto-resume [ 39.181424] hub 3-0:1.0: hub_resume [ 39.181464] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.181502] hub 3-0:1.0: hub_suspend [ 39.181513] usb usb3: bus auto-suspend, wakeup 1 [ 39.183366] usb usb3: usb auto-resume [ 39.193424] hub 3-0:1.0: hub_resume [ 39.193466] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.193518] hub 3-0:1.0: hub_suspend [ 39.193526] usb usb3: bus auto-suspend, wakeup 1 [ 39.193615] usb usb3: usb auto-resume [ 39.205455] hub 3-0:1.0: hub_resume [ 39.205513] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.205530] hub 3-0:1.0: hub_suspend [ 39.205544] usb usb3: bus auto-suspend, wakeup 1 [ 39.207524] usb usb3: usb auto-resume [ 39.217436] hub 3-0:1.0: hub_resume [ 39.217498] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.217556] hub 3-0:1.0: hub_suspend [ 39.217566] usb usb3: bus auto-suspend, wakeup 1 [ 39.217672] usb usb3: usb auto-resume [ 39.229427] hub 3-0:1.0: hub_resume [ 39.229488] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.229533] hub 3-0:1.0: hub_suspend [ 39.229548] usb usb3: bus auto-suspend, wakeup 1 [ 39.232236] usb usb3: usb auto-resume [ 39.241426] hub 3-0:1.0: hub_resume [ 39.241484] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.241546] hub 3-0:1.0: hub_suspend [ 39.241556] usb usb3: bus auto-suspend, wakeup 1 [ 39.241656] usb usb3: usb auto-resume [ 39.253364] hub 3-0:1.0: hub_resume [ 39.253413] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.253439] hub 3-0:1.0: hub_suspend [ 39.253453] usb usb3: bus auto-suspend, wakeup 1 [ 39.257803] usb usb3: usb auto-resume [ 39.269447] hub 3-0:1.0: hub_resume [ 39.269502] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.269542] hub 3-0:1.0: hub_suspend [ 39.269561] usb usb3: bus auto-suspend, wakeup 1 [ 39.269667] usb usb3: usb auto-resume [ 39.281419] hub 3-0:1.0: hub_resume [ 39.281497] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.281526] hub 3-0:1.0: hub_suspend [ 39.281537] usb usb3: bus auto-suspend, wakeup 1 [ 39.283400] usb usb3: usb auto-resume [ 39.293402] hub 3-0:1.0: hub_resume [ 39.293494] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.293521] hub 3-0:1.0: hub_suspend [ 39.293531] usb usb3: bus auto-suspend, wakeup 1 [ 39.293574] usb usb3: usb auto-resume [ 39.305384] hub 3-0:1.0: hub_resume [ 39.305473] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.305501] hub 3-0:1.0: hub_suspend [ 39.305511] usb usb3: bus auto-suspend, wakeup 1 [ 39.307485] usb usb3: usb auto-resume [ 39.317384] hub 3-0:1.0: hub_resume [ 39.317471] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.317499] hub 3-0:1.0: hub_suspend [ 39.317509] usb usb3: bus auto-suspend, wakeup 1 [ 39.317545] usb usb3: usb auto-resume [ 39.329381] hub 3-0:1.0: hub_resume [ 39.329480] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.329508] hub 3-0:1.0: hub_suspend [ 39.329517] usb usb3: bus auto-suspend, wakeup 1 [ 39.331608] usb usb3: usb auto-resume [ 39.341366] hub 3-0:1.0: hub_resume [ 39.341454] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.341481] hub 3-0:1.0: hub_suspend [ 39.341491] usb usb3: bus auto-suspend, wakeup 1 [ 39.341532] usb usb3: usb auto-resume [ 39.353362] hub 3-0:1.0: hub_resume [ 39.353461] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.353488] hub 3-0:1.0: hub_suspend [ 39.353498] usb usb3: bus auto-suspend, wakeup 1 [ 39.356282] usb usb3: usb auto-resume [ 39.365344] hub 3-0:1.0: hub_resume [ 39.365408] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.365456] hub 3-0:1.0: hub_suspend [ 39.365466] usb usb3: bus auto-suspend, wakeup 1 [ 39.365566] usb usb3: usb auto-resume [ 39.377336] hub 3-0:1.0: hub_resume [ 39.377435] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.377465] hub 3-0:1.0: hub_suspend [ 39.377476] usb usb3: bus auto-suspend, wakeup 1 [ 40.380897] usb usb3: usb auto-resume [ 40.380922] hub 3-0:1.0: hub_resume [ 40.381009] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 40.381052] hub 3-0:1.0: hub_suspend [ 40.381062] usb usb3: bus auto-suspend, wakeup 1 [ 40.685411] usb usb3: usb auto-resume [ 40.685437] hub 3-0:1.0: hub_resume [ 40.685523] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 40.685604] hub 3-0:1.0: hub_suspend [ 40.685617] usb usb3: bus auto-suspend, wakeup 1 [ 40.689919] usb usb3: usb auto-resume [ 40.700430] hub 3-0:1.0: hub_resume [ 40.700476] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 40.700517] hub 3-0:1.0: hub_suspend [ 40.700527] usb usb3: bus auto-suspend, wakeup 1 [ 40.700633] usb usb3: usb auto-resume [ 40.712383] hub 3-0:1.0: hub_resume [ 40.712438] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 40.712468] hub 3-0:1.0: hub_suspend [ 40.712483] usb usb3: bus auto-suspend, wakeup 1 [ 40.714394] usb usb3: usb auto-resume [ 40.724458] hub 3-0:1.0: hub_resume [ 40.724544] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 40.724571] hub 3-0:1.0: hub_suspend [ 40.724581] usb usb3: bus auto-suspend, wakeup 1 [ 40.724612] usb usb3: usb auto-resume [ 40.736357] hub 3-0:1.0: hub_resume [ 40.736438] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 40.736463] hub 3-0:1.0: hub_suspend [ 40.736472] usb usb3: bus auto-suspend, wakeup 1 [ 40.739310] usb usb3: usb auto-resume [ 40.748430] hub 3-0:1.0: hub_resume [ 40.748501] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 40.748542] hub 3-0:1.0: hub_suspend [ 40.748560] usb usb3: bus auto-suspend, wakeup 1 [ 40.748657] usb usb3: usb auto-resume [ 40.760364] hub 3-0:1.0: hub_resume [ 40.760451] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 40.760477] hub 3-0:1.0: hub_suspend [ 40.760487] usb usb3: bus auto-suspend, wakeup 1 [ 40.765187] usb usb3: usb auto-resume [ 40.776335] hub 3-0:1.0: hub_resume [ 40.776380] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 40.776426] hub 3-0:1.0: hub_suspend [ 40.776434] usb usb3: bus auto-suspend, wakeup 1 [ 40.776520] usb usb3: usb auto-resume [ 40.788294] hub 3-0:1.0: hub_resume [ 40.788343] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 40.788373] hub 3-0:1.0: hub_suspend [ 40.788384] usb usb3: bus auto-suspend, wakeup 1 [ 40.792751] usb usb3: usb auto-resume [ 40.804323] hub 3-0:1.0: hub_resume [ 40.804373] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 40.804417] hub 3-0:1.0: hub_suspend [ 40.804427] usb usb3: bus auto-suspend, wakeup 1 [ 40.804526] usb usb3: usb auto-resume [ 40.816300] hub 3-0:1.0: hub_resume [ 40.816369] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 40.816405] hub 3-0:1.0: hub_suspend [ 40.816417] usb usb3: bus auto-suspend, wakeup 1 [ 40.865864] usb usb3: usb auto-resume [ 40.865886] hub 3-0:1.0: hub_resume [ 40.865948] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 40.865999] hub 3-0:1.0: hub_suspend [ 40.866005] usb usb3: bus auto-suspend, wakeup 1 [ 40.874555] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 40.874563] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 40.874567] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1] [ 40.874577] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 40.874579] [drm:drm_mode_debug_printmodeline], Modeline 19:"1366x768" 60 70700 1366 1414 1446 1486 768 770 775 792 0x8 0xa [ 40.874587] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 40.874759] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 40.874763] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 40.874765] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 40.874769] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 40.874772] [drm:intel_crt_detect], CRT not detected via hotplug [ 40.874961] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 40.874966] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 40.874969] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 40.874971] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 40.875314] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 40.875316] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 40.875318] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 40.875321] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 40.875328] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 40.875330] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 40.875332] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 40.875336] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 40.875338] [drm:intel_crt_detect], CRT not detected via hotplug [ 40.875509] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 40.875512] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 40.875514] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 40.875525] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 40.875879] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 40.875881] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 40.875883] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 40.875885] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 40.875895] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 40.875898] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 40.875900] [drm:intel_hdmi_detect], [CONNECTOR:14:HDMI-A-1] [ 40.876055] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 40.876058] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 40.876060] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected [ 40.876073] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 40.876076] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 40.876078] [drm:intel_hdmi_detect], [CONNECTOR:14:HDMI-A-1] [ 40.876239] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 40.876244] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 40.876248] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected [ 40.876268] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 40.876273] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 40.876277] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 40.876282] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 40.876288] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 40.876292] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 40.876295] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 40.876299] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 42.863031] usb 1-1.4: usb auto-suspend, wakeup 0 [ 47.895899] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 47.895908] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 47.895912] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1] [ 47.895923] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 47.895926] [drm:drm_mode_debug_printmodeline], Modeline 19:"1366x768" 60 70700 1366 1414 1446 1486 768 770 775 792 0x8 0xa [ 47.895935] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 47.896127] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 47.896131] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 47.896133] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 47.896137] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 47.896140] [drm:intel_crt_detect], CRT not detected via hotplug [ 47.896309] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 47.896312] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 47.896315] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 47.896317] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 47.896659] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 47.896663] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 47.896665] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 47.896668] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 47.896677] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 47.896680] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 47.896683] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 47.896687] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 47.896689] [drm:intel_crt_detect], CRT not detected via hotplug [ 47.896848] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 47.896855] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 47.896859] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 47.896861] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 47.897206] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 47.897208] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 47.897210] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 47.897212] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 47.897224] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 47.897227] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 47.897229] [drm:intel_hdmi_detect], [CONNECTOR:14:HDMI-A-1] [ 47.897388] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 47.897391] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 47.897393] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected [ 47.897398] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 47.897400] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 47.897402] [drm:intel_hdmi_detect], [CONNECTOR:14:HDMI-A-1] [ 47.897567] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 47.897572] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 47.897577] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected [ 47.897598] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 47.897601] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 47.897603] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 47.897606] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 47.897609] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 47.897611] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 47.897613] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 47.897615] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 47.971798] [drm:intel_crtc_cursor_set], cursor off [ 48.459121] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 48.459131] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 48.459134] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1] [ 48.459145] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 48.459147] [drm:drm_mode_debug_printmodeline], Modeline 19:"1366x768" 60 70700 1366 1414 1446 1486 768 770 775 792 0x8 0xa [ 48.459155] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 48.459356] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 48.459360] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 48.459363] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 48.459367] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 48.459370] [drm:intel_crt_detect], CRT not detected via hotplug [ 48.459536] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 48.459542] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 48.459545] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 48.459547] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 48.459891] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 48.459894] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 48.459896] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 48.459898] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 48.459904] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 48.459906] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 48.459908] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 48.459910] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 48.459912] [drm:intel_crt_detect], CRT not detected via hotplug [ 48.460071] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 48.460073] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 48.460075] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 48.460076] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 48.460421] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 48.460423] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 48.460424] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 48.460426] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 48.460433] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 48.460436] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 48.460438] [drm:intel_hdmi_detect], [CONNECTOR:14:HDMI-A-1] [ 48.460595] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 48.460597] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 48.460599] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected [ 48.460603] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 48.460604] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 48.460606] [drm:intel_hdmi_detect], [CONNECTOR:14:HDMI-A-1] [ 48.460762] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 48.460764] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 48.460766] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected [ 48.460771] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 48.460773] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 48.460775] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 48.460778] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 48.460781] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 48.460783] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 48.460784] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 48.460787] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 49.593322] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null) [ 49.639740] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 56.699906] [drm:i915_driver_open], [ 56.708207] [drm:i915_gem_context_create_ioctl], HW context 1 created [ 56.715864] [drm:i915_gem_context_destroy_ioctl], HW context 1 destroyed [ 69.147403] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 69.147411] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 69.147414] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1] [ 69.147422] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 69.147424] [drm:drm_mode_debug_printmodeline], Modeline 19:"1366x768" 60 70700 1366 1414 1446 1486 768 770 775 792 0x8 0xa [ 69.147430] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 69.147566] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 69.147569] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 69.147571] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 69.147575] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 69.147577] [drm:intel_crt_detect], CRT not detected via hotplug [ 69.147743] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 69.147747] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 69.147749] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 69.147751] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 69.148095] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 69.148096] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 69.148098] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 69.148100] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 69.148105] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 69.148107] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 69.148109] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 69.148112] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 69.148113] [drm:intel_crt_detect], CRT not detected via hotplug [ 69.148265] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 69.148268] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 69.148269] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 69.148271] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 69.148613] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 69.148615] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 69.148616] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 69.148618] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 69.148625] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 69.148628] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 69.148630] [drm:intel_hdmi_detect], [CONNECTOR:14:HDMI-A-1] [ 69.148786] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 69.148788] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 69.148790] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected [ 69.148794] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 69.148796] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 69.148798] [drm:intel_hdmi_detect], [CONNECTOR:14:HDMI-A-1] [ 69.148954] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 69.148956] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 69.148957] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected [ 69.148963] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 69.148965] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 69.148967] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 69.148970] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 69.148973] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 69.148975] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 69.148976] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 69.148979] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 89.195780] [drm:intel_crtc_cursor_set], cursor off