[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <520B3560.7020004@ti.com>
Date: Wed, 14 Aug 2013 10:44:32 +0300
From: Roger Quadros <rogerq@...com>
To: <balbi@...com>
CC: Roger Quadros <rogerq@...com>, <tony@...mide.com>, <kishon@...com>,
<george.cherian@...com>, <dmurphy@...com>,
<linux-usb@...r.kernel.org>, <linux-omap@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<bcousson@...libre.com>
Subject: Re: [PATCH 0/7] phy: omap-usb: Support multiple instances and new
types
+Benoit
Hi Felipe,
Any comments on this series?
cheers,
-roger
On 08/01/2013 05:05 PM, Roger Quadros wrote:
> Hi,
>
> This patchset does the following:
>
> * Restructure and add support for new PHY types. We now support the follwing
> four types
>
> TYPE1 - if it has otghs_control mailbox register (e.g. on OMAP4)
> TYPE2 - if it has Power down bit in control_dev_conf register. e.g. USB2 PHY
> TYPE3 - if it has DPLL and individual Rx & Tx power control. e.g. USB3 PHY or SATA PHY
> TYPE4 - if it has both power down and power aux registers. e.g. USB2 PHY on DRA7
>
> * Have only one power control API "omap_control_usb_phy_power()" instead of a
> different one for each PHY type.
>
> * Get rid of omap_get_control_dev() so that we can support multiple instances
> of the control device. We take advantage of the fact that omap control USB device
> is only present on OMAP4 onwards and hence only supports DT boot. The users
> of control USB device can get a reference to it from the device node's phandle.
>
> Patches are based on top of v3.11-rc3 with balbi/next on top.
>
> Smoke tested on OMAP4 panda with MUSB in gadget mode (g_zero).
>
> You can find the patches in branch
> usb-control-module
> in git tree
> git://github.com/rogerq/linux.git
>
> cheers,
> -roger
>
> Roger Quadros (7):
> usb: phy: omap: Add new PHY types and remove
> omap_control_usb3_phy_power()
> usb: phy: omap-usb2: Don't use omap_get_control_dev()
> usb: phy: omap-usb3: Don't use omap_get_control_dev()
> usb: musb: omap2430: Don't use omap_get_control_dev()
> usb: phy: omap: get rid of omap_get_control_dev()
> ARM: dts: omap4: update omap-control-usb nodes
> ARM: dts: omap5: update omap-control-usb node
>
> Documentation/devicetree/bindings/usb/omap-usb.txt | 23 ++--
> arch/arm/boot/dts/omap4.dtsi | 17 ++-
> arch/arm/boot/dts/omap5.dtsi | 18 ++-
> drivers/usb/musb/omap2430.c | 22 +++-
> drivers/usb/phy/phy-omap-control.c | 160 ++++++++++---------
> drivers/usb/phy/phy-omap-usb2.c | 20 ++-
> drivers/usb/phy/phy-omap-usb3.c | 26 +++-
> include/linux/usb/omap_control_usb.h | 23 +--
> 8 files changed, 182 insertions(+), 127 deletions(-)
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists