| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1376521969-16807-5-git-send-email-joelf@ti.com>
Date: Wed, 14 Aug 2013 18:12:43 -0500
From: Joel Fernandes <joelf@...com>
To: Herbert Xu <herbert@...dor.hengli.com.au>,
"David S. Miller" <davem@...emloft.net>,
Mark Greer <mgreer@...malcreek.com>,
Tony Lindgren <tony@...mide.com>,
Santosh Shilimkar <santosh.shilimkar@...com>,
Rajendra Nayak <rnayak@...com>,
Lokesh Vutla <lokeshvutla@...com>
CC: Linux OMAP List <linux-omap@...r.kernel.org>,
Linux ARM Kernel List <linux-arm-kernel@...ts.infradead.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Linux Crypto Mailing List <linux-crypto@...r.kernel.org>,
Joel Fernandes <joelf@...com>
Subject: [PATCH 04/10] crypto: omap-aes: Simplify DMA usage by using direct SGs
In early version of this driver, assumptions were made such as
DMA layer requires contiguous buffers etc. Due to this, new buffers
were allocated, mapped and used for DMA. These assumptions are no
longer true and DMAEngine scatter-gather DMA doesn't have such
requirements. We simply the DMA operations by directly using the
scatter-gather buffers provided by the crypto layer instead of
creating our own.
Lot of logic that handled DMA'ing only X number of bytes of the
total, or as much as fitted into a 3rd party buffer is removed
and is no longer required.
Also, drastically improves performance (atleast 35% seen with
encrypting a buffer size of 8K (2800 ops/sec vs 1800 ops/sec).
Also DMA usage is much more simplified and coherent with rest
of the code.
Signed-off-by: Joel Fernandes <joelf@...com>
---
drivers/crypto/omap-aes.c | 147 ++++++++-------------------------------------
1 file changed, 25 insertions(+), 122 deletions(-)
diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c
index b7189a8..9104a7f 100644
--- a/drivers/crypto/omap-aes.c
+++ b/drivers/crypto/omap-aes.c
@@ -490,22 +490,14 @@ static int sg_copy(struct scatterlist **sg, size_t *offset, void *buf,
}
static int omap_aes_crypt_dma(struct crypto_tfm *tfm,
- struct scatterlist *in_sg, struct scatterlist *out_sg)
+ struct scatterlist *in_sg, struct scatterlist *out_sg,
+ int in_sg_len, int out_sg_len)
{
struct omap_aes_ctx *ctx = crypto_tfm_ctx(tfm);
struct omap_aes_dev *dd = ctx->dd;
struct dma_async_tx_descriptor *tx_in, *tx_out;
struct dma_slave_config cfg;
- dma_addr_t dma_addr_in = sg_dma_address(in_sg);
- int ret, length = sg_dma_len(in_sg);
-
- pr_debug("len: %d\n", length);
-
- dd->dma_size = length;
-
- if (!(dd->flags & FLAGS_FAST))
- dma_sync_single_for_device(dd->dev, dma_addr_in, length,
- DMA_TO_DEVICE);
+ int ret;
memset(&cfg, 0, sizeof(cfg));
@@ -524,7 +516,7 @@ static int omap_aes_crypt_dma(struct crypto_tfm *tfm,
return ret;
}
- tx_in = dmaengine_prep_slave_sg(dd->dma_lch_in, in_sg, 1,
+ tx_in = dmaengine_prep_slave_sg(dd->dma_lch_in, in_sg, in_sg_len,
DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!tx_in) {
@@ -543,7 +535,7 @@ static int omap_aes_crypt_dma(struct crypto_tfm *tfm,
return ret;
}
- tx_out = dmaengine_prep_slave_sg(dd->dma_lch_out, out_sg, 1,
+ tx_out = dmaengine_prep_slave_sg(dd->dma_lch_out, out_sg, out_sg_len,
DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!tx_out) {
@@ -561,7 +553,7 @@ static int omap_aes_crypt_dma(struct crypto_tfm *tfm,
dma_async_issue_pending(dd->dma_lch_out);
/* start DMA */
- dd->pdata->trigger(dd, length);
+ dd->pdata->trigger(dd, dd->total);
return 0;
}
@@ -570,93 +562,28 @@ static int omap_aes_crypt_dma_start(struct omap_aes_dev *dd)
{
struct crypto_tfm *tfm = crypto_ablkcipher_tfm(
crypto_ablkcipher_reqtfm(dd->req));
- int err, fast = 0, in, out;
- size_t count;
- dma_addr_t addr_in, addr_out;
- struct scatterlist *in_sg, *out_sg;
- int len32;
+ int err;
pr_debug("total: %d\n", dd->total);
- if (sg_is_last(dd->in_sg) && sg_is_last(dd->out_sg)) {
- /* check for alignment */
- in = IS_ALIGNED((u32)dd->in_sg->offset, sizeof(u32));
- out = IS_ALIGNED((u32)dd->out_sg->offset, sizeof(u32));
-
- fast = in && out;
+ err = dma_map_sg(dd->dev, dd->in_sg, dd->in_sg_len, DMA_TO_DEVICE);
+ if (!err) {
+ dev_err(dd->dev, "dma_map_sg() error\n");
+ return -EINVAL;
}
- if (fast) {
- count = min(dd->total, sg_dma_len(dd->in_sg));
- count = min(count, sg_dma_len(dd->out_sg));
-
- if (count != dd->total) {
- pr_err("request length != buffer length\n");
- return -EINVAL;
- }
-
- pr_debug("fast\n");
-
- err = dma_map_sg(dd->dev, dd->in_sg, 1, DMA_TO_DEVICE);
- if (!err) {
- dev_err(dd->dev, "dma_map_sg() error\n");
- return -EINVAL;
- }
-
- err = dma_map_sg(dd->dev, dd->out_sg, 1, DMA_FROM_DEVICE);
- if (!err) {
- dev_err(dd->dev, "dma_map_sg() error\n");
- dma_unmap_sg(dd->dev, dd->in_sg, 1, DMA_TO_DEVICE);
- return -EINVAL;
- }
-
- addr_in = sg_dma_address(dd->in_sg);
- addr_out = sg_dma_address(dd->out_sg);
-
- in_sg = dd->in_sg;
- out_sg = dd->out_sg;
-
- dd->flags |= FLAGS_FAST;
-
- } else {
- /* use cache buffers */
- count = sg_copy(&dd->in_sg, &dd->in_offset, dd->buf_in,
- dd->buflen, dd->total, 0);
-
- len32 = DIV_ROUND_UP(count, DMA_MIN) * DMA_MIN;
-
- /*
- * The data going into the AES module has been copied
- * to a local buffer and the data coming out will go
- * into a local buffer so set up local SG entries for
- * both.
- */
- sg_init_table(&dd->in_sgl, 1);
- dd->in_sgl.offset = dd->in_offset;
- sg_dma_len(&dd->in_sgl) = len32;
- sg_dma_address(&dd->in_sgl) = dd->dma_addr_in;
-
- sg_init_table(&dd->out_sgl, 1);
- dd->out_sgl.offset = dd->out_offset;
- sg_dma_len(&dd->out_sgl) = len32;
- sg_dma_address(&dd->out_sgl) = dd->dma_addr_out;
-
- in_sg = &dd->in_sgl;
- out_sg = &dd->out_sgl;
-
- addr_in = dd->dma_addr_in;
- addr_out = dd->dma_addr_out;
-
- dd->flags &= ~FLAGS_FAST;
-
+ err = dma_map_sg(dd->dev, dd->out_sg, dd->out_sg_len, DMA_FROM_DEVICE);
+ if (!err) {
+ dev_err(dd->dev, "dma_map_sg() error\n");
+ return -EINVAL;
}
- dd->total -= count;
-
- err = omap_aes_crypt_dma(tfm, in_sg, out_sg);
+ err = omap_aes_crypt_dma(tfm, dd->in_sg, dd->out_sg, dd->in_sg_len,
+ dd->out_sg_len);
if (err) {
- dma_unmap_sg(dd->dev, dd->in_sg, 1, DMA_TO_DEVICE);
- dma_unmap_sg(dd->dev, dd->out_sg, 1, DMA_TO_DEVICE);
+ dma_unmap_sg(dd->dev, dd->in_sg, dd->in_sg_len, DMA_TO_DEVICE);
+ dma_unmap_sg(dd->dev, dd->out_sg, dd->out_sg_len,
+ DMA_FROM_DEVICE);
}
return err;
@@ -677,7 +604,6 @@ static void omap_aes_finish_req(struct omap_aes_dev *dd, int err)
static int omap_aes_crypt_dma_stop(struct omap_aes_dev *dd)
{
int err = 0;
- size_t count;
pr_debug("total: %d\n", dd->total);
@@ -686,21 +612,8 @@ static int omap_aes_crypt_dma_stop(struct omap_aes_dev *dd)
dmaengine_terminate_all(dd->dma_lch_in);
dmaengine_terminate_all(dd->dma_lch_out);
- if (dd->flags & FLAGS_FAST) {
- dma_unmap_sg(dd->dev, dd->out_sg, 1, DMA_FROM_DEVICE);
- dma_unmap_sg(dd->dev, dd->in_sg, 1, DMA_TO_DEVICE);
- } else {
- dma_sync_single_for_device(dd->dev, dd->dma_addr_out,
- dd->dma_size, DMA_FROM_DEVICE);
-
- /* copy data */
- count = sg_copy(&dd->out_sg, &dd->out_offset, dd->buf_out,
- dd->buflen, dd->dma_size, 1);
- if (count != dd->dma_size) {
- err = -EINVAL;
- pr_err("not all data converted: %u\n", count);
- }
- }
+ dma_unmap_sg(dd->dev, dd->in_sg, dd->in_sg_len, DMA_TO_DEVICE);
+ dma_unmap_sg(dd->dev, dd->out_sg, dd->out_sg_len, DMA_FROM_DEVICE);
return err;
}
@@ -770,21 +683,11 @@ static int omap_aes_handle_queue(struct omap_aes_dev *dd,
static void omap_aes_done_task(unsigned long data)
{
struct omap_aes_dev *dd = (struct omap_aes_dev *)data;
- int err;
-
- pr_debug("enter\n");
- err = omap_aes_crypt_dma_stop(dd);
-
- err = dd->err ? : err;
-
- if (dd->total && !err) {
- err = omap_aes_crypt_dma_start(dd);
- if (!err)
- return; /* DMA started. Not fininishing. */
- }
+ pr_debug("enter done_task\n");
- omap_aes_finish_req(dd, err);
+ omap_aes_crypt_dma_stop(dd);
+ omap_aes_finish_req(dd, 0);
omap_aes_handle_queue(dd, NULL);
pr_debug("exit\n");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists