lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <afcf37938eb552cccba058f414cd900ee585bc0a.1376619363.git.viresh.kumar@linaro.org>
Date:	Fri, 16 Aug 2013 07:55:05 +0530
From:	Viresh Kumar <viresh.kumar@...aro.org>
To:	rjw@...k.pl
Cc:	linaro-kernel@...ts.linaro.org, patches@...aro.org,
	cpufreq@...r.kernel.org, linux-pm@...r.kernel.org,
	linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	Viresh Kumar <viresh.kumar@...aro.org>,
	Sekhar Nori <nsekhar@...com>
Subject: [PATCH 08/34] cpufreq: davinci: remove calls to cpufreq_notify_transition()

Most of the drivers do following in their ->target_index() routines:

	struct cpufreq_freqs freqs;
	freqs.old = old freq...
	freqs.new = new freq...

	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);

	/* Change rate here */

	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);

This is replicated over all cpufreq drivers today and there doesn't exists a
good enough reason why this shouldn't be moved to cpufreq core instead.

Earlier patches have added support in cpufreq core to do cpufreq notification on
frequency change, this one removes it from this driver.

Some related minor cleanups are also done along with it.

Cc: Sekhar Nori <nsekhar@...com>
Signed-off-by: Viresh Kumar <viresh.kumar@...aro.org>
---
 drivers/cpufreq/davinci-cpufreq.c | 30 ++++++++++--------------------
 1 file changed, 10 insertions(+), 20 deletions(-)

diff --git a/drivers/cpufreq/davinci-cpufreq.c b/drivers/cpufreq/davinci-cpufreq.c
index 07ea6c0..7fcae0c 100644
--- a/drivers/cpufreq/davinci-cpufreq.c
+++ b/drivers/cpufreq/davinci-cpufreq.c
@@ -70,46 +70,36 @@ static unsigned int davinci_getspeed(unsigned int cpu)
 
 static int davinci_target(struct cpufreq_policy *policy, unsigned int idx)
 {
-	int ret = 0;
-	struct cpufreq_freqs freqs;
 	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
 	struct clk *armclk = cpufreq.armclk;
+	unsigned int old_freq, new_freq;
+	int ret = 0;
 
-	freqs.old = davinci_getspeed(0);
-	freqs.new = pdata->freq_table[idx].frequency;
-
-	dev_dbg(cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new);
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+	old_freq = davinci_getspeed(0);
+	new_freq = pdata->freq_table[idx].frequency;
 
 	/* if moving to higher frequency, up the voltage beforehand */
-	if (pdata->set_voltage && freqs.new > freqs.old) {
+	if (pdata->set_voltage && new_freq > old_freq) {
 		ret = pdata->set_voltage(idx);
 		if (ret)
-			goto out;
+			return ret;
 	}
 
 	ret = clk_set_rate(armclk, idx);
 	if (ret)
-		goto out;
+		return ret;
 
 	if (cpufreq.asyncclk) {
 		ret = clk_set_rate(cpufreq.asyncclk, cpufreq.asyncrate);
 		if (ret)
-			goto out;
+			return ret;
 	}
 
 	/* if moving to lower freq, lower the voltage after lowering freq */
-	if (pdata->set_voltage && freqs.new < freqs.old)
+	if (pdata->set_voltage && new_freq < old_freq)
 		pdata->set_voltage(idx);
 
-out:
-	if (ret)
-		freqs.new = freqs.old;
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
-	return ret;
+	return 0;
 }
 
 static int davinci_cpu_init(struct cpufreq_policy *policy)
-- 
1.7.12.rc2.18.g61b472e

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ