[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <5212624D.5090708@samsung.com>
Date: Mon, 19 Aug 2013 20:22:05 +0200
From: Sylwester Nawrocki <s.nawrocki@...sung.com>
To: Wolfram Sang <wsa@...-dreams.de>
Cc: linux-i2c@...r.kernel.org, linux-acpi@...r.kernel.org,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
linuxppc-dev@...ts.ozlabs.org,
davinci-linux-open-source@...ux.davincidsp.com,
linux-arm-kernel@...ts.infradead.org, linux-omap@...r.kernel.org,
linux-samsung-soc@...r.kernel.org, linux-tegra@...r.kernel.org,
linux-media@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH RESEND] i2c: move of helpers into the core
On 08/19/2013 07:59 PM, Wolfram Sang wrote:
> I2C of helpers used to live in of_i2c.c but experience (from SPI) shows
> that it is much cleaner to have this in the core. This also removes a
> circular dependency between the helpers and the core, and so we can
> finally register child nodes in the core instead of doing this manually
> in each driver. So, fix the drivers and documentation, too.
>
> Signed-off-by: Wolfram Sang <wsa@...-dreams.de>
> ---
>
> Sigh, hitting the CC threshold on vger again. So resending to the lists only.
> BTW this patch is based on -rc4 and was tested on an AT91 board. More tests
> very welcome. Thanks!
>
>
> drivers/i2c/busses/i2c-s3c2410.c | 2 -
> drivers/media/platform/exynos4-is/fimc-is-i2c.c | 3 -
For these:
Acked-by: Sylwester Nawrocki <s.nawrocki@...ung.com>
However this patch fails to apply onto either v3.11-rc4 or v3.11-rc6:
Applying: i2c: move of helpers into the core
fatal: sha1 information is lacking or useless (drivers/i2c/busses/i2c-powermac.c).
Repository lacks necessary blobs to fall back on 3-way merge.
Cannot fall back to three-way merge.
Patch failed at 0001 i2c: move of helpers into the core
One nitpick below..
[...]
> diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
> index f32ca29..321b7ca 100644
> --- a/drivers/i2c/i2c-core.c
> +++ b/drivers/i2c/i2c-core.c
> @@ -23,7 +23,11 @@
> SMBus 2.0 support by Mark Studebaker <mdsxyz123@...oo.com> and
> Jean Delvare <khali@...ux-fr.org>
> Mux support by Rodolfo Giometti <giometti@...eenne.com> and
> - Michael Lawnick <michael.lawnick.ext@....com> */
> + Michael Lawnick <michael.lawnick.ext@....com>
> + OF support is copyright (c) 2008 Jochen Friedrich <jochen@...am.de>
> + (based on a previous patch from Jon Smirl <jonsmirl@...il.com>) and
> + (c) 2013 Wolfram Sang <wsa@...-dreams.de>
> + */
>
> #include <linux/module.h>
> #include <linux/kernel.h>
> @@ -35,7 +39,9 @@
> #include <linux/init.h>
> #include <linux/idr.h>
> #include <linux/mutex.h>
> +#include <linux/of.h>
> #include <linux/of_device.h>
> +#include <linux/of_irq.h>
> #include <linux/completion.h>
> #include <linux/hardirq.h>
> #include <linux/irqflags.h>
> @@ -954,6 +960,102 @@ static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
> up_read(&__i2c_board_lock);
> }
>
> +/* of support code */
/* OF support code */
or
/*
* Device Tree support code.
*/
?
> +#if IS_ENABLED(CONFIG_OF)
> +static void of_i2c_register_devices(struct i2c_adapter *adap)
> +{
> + void *result;
> + struct device_node *node;
> +
> + /* Only register child devices if the adapter has a node pointer set */
> + if (!adap->dev.of_node)
> + return;
> +
> + dev_dbg(&adap->dev, "of_i2c: walking child nodes\n");
> +
> + for_each_available_child_of_node(adap->dev.of_node, node) {
> + struct i2c_board_info info = {};
> + struct dev_archdata dev_ad = {};
> + const __be32 *addr;
> + int len;
> +
> + dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name);
> +
> + if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
> + dev_err(&adap->dev, "of_i2c: modalias failure on %s\n",
> + node->full_name);
> + continue;
> + }
> +
> + addr = of_get_property(node, "reg", &len);
> + if (!addr || (len < sizeof(int))) {
> + dev_err(&adap->dev, "of_i2c: invalid reg on %s\n",
> + node->full_name);
> + continue;
> + }
> +
> + info.addr = be32_to_cpup(addr);
> + if (info.addr > (1 << 10) - 1) {
> + dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n",
> + info.addr, node->full_name);
> + continue;
> + }
> +
> + info.irq = irq_of_parse_and_map(node, 0);
> + info.of_node = of_node_get(node);
> + info.archdata = &dev_ad;
> +
> + if (of_get_property(node, "wakeup-source", NULL))
> + info.flags |= I2C_CLIENT_WAKE;
> +
> + request_module("%s%s", I2C_MODULE_PREFIX, info.type);
> +
> + result = i2c_new_device(adap, &info);
> + if (result == NULL) {
> + dev_err(&adap->dev, "of_i2c: Failure registering %s\n",
> + node->full_name);
> + of_node_put(node);
> + irq_dispose_mapping(info.irq);
> + continue;
> + }
> + }
> +}
> +
> +static int of_dev_node_match(struct device *dev, void *data)
> +{
> + return dev->of_node == data;
> +}
> +
> +/* must call put_device() when done with returned i2c_client device */
> +struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
> +{
> + struct device *dev;
> +
> + dev = bus_find_device(&i2c_bus_type, NULL, node,
> + of_dev_node_match);
> + if (!dev)
> + return NULL;
> +
> + return i2c_verify_client(dev);
> +}
> +EXPORT_SYMBOL(of_find_i2c_adapter_by_node);
> +
> +/* must call put_device() when done with returned i2c_adapter device */
> +struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node)
> +{
> + struct device *dev;
> +
> + dev = bus_find_device(&i2c_bus_type, NULL, node,
> + of_dev_node_match);
> + if (!dev)
> + return NULL;
> +
> + return i2c_verify_adapter(dev);
> +}
> +EXPORT_SYMBOL(of_find_i2c_device_by_node);
> +#endif /* CONFIG_OF */
Thanks,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists