| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1376962382-29913-2-git-send-email-furquan@google.com>
Date: Mon, 19 Aug 2013 18:33:02 -0700
From: Furquan Shaikh <furquan@...gle.com>
To: Jesse Barnes <jbarnes@...tuousgeek.org>,
Paulo Zanoni <paulo.r.zanoni@...el.com>,
Josh Triplett <josh.triplett@...el.com>,
Daniel Vetter <daniel.vetter@...el.com>,
intel-gfx@...ts.freedesktop.org
Cc: Ronald Minnich <rminnich@...gle.com>,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
Furquan Shaikh <furquan@...gle.com>, furquan.m.shaikh@...il.com
Subject: [PATCH 2/2] drm/i915: add fast boot support for Haswell
Enables getting correct mode clock when reading pipe config
This patch has been tested successfully on top of drm-intel-nightly tree
Signed-off-by: Furquan Shaikh <furquan@...gle.com>
---
drivers/gpu/drm/i915/i915_reg.h | 6 ++++
drivers/gpu/drm/i915/intel_ddi.c | 70 ++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_display.c | 1 +
3 files changed, 77 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 2b96d6b..9511129 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4970,6 +4970,7 @@
#define SPLL_PLL_NON_SSC (2<<28)
#define SPLL_PLL_FREQ_810MHz (0<<26)
#define SPLL_PLL_FREQ_1350MHz (1<<26)
+#define SPLL_PLL_FREQ_MASK (3<<26)
/* WRPLL */
#define WRPLL_CTL1 0x46040
@@ -4983,6 +4984,10 @@
#define WRPLL_DIVIDER_POST(x) ((x)<<8)
#define WRPLL_DIVIDER_FEEDBACK(x) ((x)<<16)
+#define WRPLL_DIVIDER_REFERENCE_BITS(reg) (reg & 0xff)
+#define WRPLL_DIVIDER_POST_BITS(reg) ((reg >> 8) & 0x3f)
+#define WRPLL_DIVIDER_FEEDBACK_BITS(reg) ((reg >> 16) & 0xff)
+
/* Port clock selection */
#define PORT_CLK_SEL_A 0x46100
#define PORT_CLK_SEL_B 0x46104
@@ -4994,6 +4999,7 @@
#define PORT_CLK_SEL_WRPLL1 (4<<29)
#define PORT_CLK_SEL_WRPLL2 (5<<29)
#define PORT_CLK_SEL_NONE (7<<29)
+#define PORT_CLK_SEL_MASK (7<<29)
/* Transcoder clock selection */
#define TRANS_CLK_SEL_A 0x46140
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index b8c096b..a24a375 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1246,6 +1246,74 @@ static void intel_ddi_hot_plug(struct intel_encoder *intel_encoder)
intel_dp_check_link_status(intel_dp);
}
+static void intel_ddi_get_clock(struct intel_encoder *encoder,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+ int port = intel_ddi_get_encoder_port(encoder);
+ u32 temp = I915_READ(PORT_CLK_SEL(port)) & PORT_CLK_SEL_MASK;
+ u8 link_bw;
+
+ if ((temp == PORT_CLK_SEL_LCPLL_810) ||
+ (temp == PORT_CLK_SEL_LCPLL_1350) ||
+ (temp == PORT_CLK_SEL_LCPLL_2700)) {
+
+ switch (temp) {
+ case PORT_CLK_SEL_LCPLL_810:
+ link_bw = DP_LINK_BW_1_62;
+ break;
+ case PORT_CLK_SEL_LCPLL_1350:
+ link_bw = DP_LINK_BW_2_7;
+ break;
+ case PORT_CLK_SEL_LCPLL_2700:
+ link_bw = DP_LINK_BW_5_4;
+ break;
+ }
+ pipe_config->port_clock = drm_dp_bw_code_to_link_rate(link_bw);
+ } else if ((temp == PORT_CLK_SEL_WRPLL1) ||
+ (temp == PORT_CLK_SEL_WRPLL2)) {
+ uint64_t p, n2, r2;
+ u32 val, reg;
+ uint64_t freq2k;
+
+ switch (temp) {
+ case PORT_CLK_SEL_WRPLL1:
+ reg = WRPLL_CTL1;
+ break;
+ case PORT_CLK_SEL_WRPLL2:
+ reg = WRPLL_CTL2;
+ break;
+ }
+ val = I915_READ(reg);
+ r2 = WRPLL_DIVIDER_REFERENCE_BITS(val);
+ p = WRPLL_DIVIDER_POST_BITS(val);
+ n2 = WRPLL_DIVIDER_FEEDBACK_BITS(val);
+
+ freq2k = DIV_ROUND_UP_ULL(LC_FREQ * n2, r2 * p);
+ pipe_config->port_clock = freq2k / 10;
+ } else if (temp == PORT_CLK_SEL_SPLL) {
+ u32 val;
+
+ val = I915_READ(PORT_CLK_SEL_SPLL);
+
+ switch (val & SPLL_PLL_FREQ_MASK) {
+ case SPLL_PLL_FREQ_810MHz:
+ pipe_config->port_clock = 810000;
+ break;
+ case SPLL_PLL_FREQ_1350MHz:
+ pipe_config->port_clock = 1350000;
+ break;
+ default:
+ WARN(1, "Invalid pll freq %d\n",
+ val & SPLL_PLL_FREQ_MASK);
+ return;
+ }
+ } else {
+ WARN(1, "Invalid clock selection %d\n", temp);
+ return;
+ }
+}
+
static void intel_ddi_get_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
{
@@ -1265,6 +1333,8 @@ static void intel_ddi_get_config(struct intel_encoder *encoder,
flags |= DRM_MODE_FLAG_NVSYNC;
pipe_config->adjusted_mode.flags |= flags;
+
+ intel_ddi_get_clock(encoder, pipe_config);
}
static void intel_ddi_destroy(struct drm_encoder *encoder)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index e0069f4..1c6a3d2 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -9579,6 +9579,7 @@ static void intel_init_display(struct drm_device *dev)
if (HAS_DDI(dev)) {
dev_priv->display.get_pipe_config = haswell_get_pipe_config;
+ dev_priv->display.get_clock = ironlake_crtc_clock_get;
dev_priv->display.crtc_mode_set = haswell_crtc_mode_set;
dev_priv->display.crtc_enable = haswell_crtc_enable;
dev_priv->display.crtc_disable = haswell_crtc_disable;
--
1.8.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists