[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1377012381.26268.42.camel@iivanov-dev.int.mm-sol.com>
Date: Tue, 20 Aug 2013 18:26:21 +0300
From: "Ivan T. Ivanov" <iivanov@...sol.com>
To: Kumar Gala <galak@...eaurora.org>
Cc: balbi@...com, rob.herring@...xeda.com, pawel.moll@....com,
mark.rutland@....com, swarren@...dotorg.org,
ian.campbell@...rix.com, rob@...dley.net,
gregkh@...uxfoundation.org, grant.likely@...aro.org,
idos@...eaurora.org, mgautam@...eaurora.org,
devicetree@...r.kernel.org, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
linux-omap@...r.kernel.org, linux-arm-msm@...r.kernel.org,
Paul Zimmerman <paul.zimmerman@...opsys.com>
Subject: Re: [PATCH v4 2/3] usb: phy: Add Qualcomm SS-USB and HS-USB drivers
for DWC3 core
On Tue, 2013-08-20 at 10:01 -0500, Kumar Gala wrote:
> On Aug 20, 2013, at 9:54 AM, Ivan T. Ivanov wrote:
>
> >
> > Hi,
> >
> > On Tue, 2013-08-20 at 09:33 -0500, Felipe Balbi wrote:
> >> On Tue, Aug 20, 2013 at 05:09:11PM +0300, Ivan T. Ivanov wrote:
> >>> Hi,
> >>>
> >>> On Tue, 2013-08-20 at 08:37 -0500, Felipe Balbi wrote:
> >>>> Hi,
> >>>>
> >>>> On Tue, Aug 20, 2013 at 04:32:23PM +0300, Ivan T. Ivanov wrote:
> >>>>>> On Tue, Aug 20, 2013 at 12:56:04PM +0300, Ivan T. Ivanov wrote:
> >>>>>>> From: "Ivan T. Ivanov" <iivanov@...sol.com>
> >>>>>>>
> >>>>>>> These drivers handles control and configuration of the HS
> >>>>>>> and SS USB PHY transceivers. They are part of the driver
> >>>>>>> which manage Synopsys DesignWare USB3 controller stack
> >>>>>>> inside Qualcomm SoC's.
> >>>>>>>
> >>>>>>> Signed-off-by: Ivan T. Ivanov <iivanov@...sol.com>
> >>>>>>> ---
> >>>>>>> drivers/usb/phy/Kconfig | 11 ++
> >>>>>>> drivers/usb/phy/Makefile | 2 +
> >>>>>>> drivers/usb/phy/phy-msm-dwc3-hs.c | 327 ++++++++++++++++++++++++++++++++
> >>>>>>> drivers/usb/phy/phy-msm-dwc3-ss.c | 374 +++++++++++++++++++++++++++++++++++++
> >>>>>>
> >>>>>> please rename these PHY drivers, they have nothing to do with DWC3. PHYs
> >>>>>> don't care about the USB controller.
> >>>>>
> >>>>> I think they are SNPS DesignWare PHY's, additionally
> >>>>> wrapped with Qualcomm logic. I could substitute "dwc3"
> >>>>> with just "dw", which will be more correct.
> >>>>
> >>>> alright, thank you. Let's add Paul to the loop since he might have very
> >>>> good insight in the synopsys PHYs.
> >>>>
> >>>> mental note: if any other platform shows up with Synopsys PHY, ask them
> >>>> to use this driver instead :-)
> >>>
> >>> I really doubt that this will bi possible. Control of the PHY's is
> >>> not directly trough ULPI, UTMI or PIPE3 interfaces, but trough
> >>> QSCRATCH registers, which of course is highly Qualcomm specific.
> >>
> >> isn't it a memory mapped IP ? doesn't synopsys provide their own set of
> >> registers ?
> >
> > From what I see it is not directly mapped. How QSCRATCH write and
> > reads transactions are translated to DW IP is unclear to me.
>
>
> I think the question is how does SW access them?
"USB QSCRATCH Hardware registers" don't ask me what is this :-)
or like Pawel says: "it depends on the SOC" .
Ivan
>
> - k
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists