[ 0.000000] Linux version 3.11.0-rc5-next-20130816-05970-g1e712b0 (kbuild@athens) (gcc version 4.8.1 (Debian 4.8.1-8) ) #17 Sun Aug 18 12:22:44 CST 2013 [ 0.000000] Command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-a06-0818/next:master/.vmlinuz-1e712b0818569846d6b926ecb6bf32b3dea73609-20130818122400-2-ant branch=next/master noapic nolapic nohz=off BOOT_IMAGE=/kernel/x86_64-randconfig-a06-0818/1e712b0818569846d6b926ecb6bf32b3dea73609/vmlinuz-3.11.0-rc5-next-20130816-05970-g1e712b0 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdab0-0x000fdabf] mapped at [ffff8800000fdab0] [ 0.000000] mpc: fdac0-fdbe4 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0282e000, 0x0282efff] PGTABLE [ 0.000000] BRK [0x0282f000, 0x0282ffff] PGTABLE [ 0.000000] BRK [0x02830000, 0x02830fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x0e600000-0x0e7fffff] [ 0.000000] [mem 0x0e600000-0x0e7fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0e5fffff] [ 0.000000] [mem 0x0c000000-0x0e5fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x0bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0e800000-0x0fffdfff] [ 0.000000] [mem 0x0e800000-0x0fdfffff] page 2M [ 0.000000] [mem 0x0fe00000-0x0fffdfff] page 4k [ 0.000000] BRK [0x02831000, 0x02831fff] PGTABLE [ 0.000000] log_buf_len: 8388608 [ 0.000000] early log buf free: 127664(97%) [ 0.000000] RAMDISK: [mem 0x0e8d6000-0x0ffeffff] [ 0.000000] ACPI: RSDP 00000000000fd920 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 000000000fffe450 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 000000000fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 000000000fffe490 011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 000000000fffff40 00040 [ 0.000000] ACPI: SSDT 000000000ffff7a0 00796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 000000000ffff680 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 000000000ffff640 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65436 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 840 pages used for memmap [ 0.000000] DMA32 zone: 61438 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] mpc: fdac0-fdbe4 [ 0.000000] MPTABLE: OEM ID: BOCHSCPU [ 0.000000] MPTABLE: Product ID: 0.1 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] Bus #0 is PCI [ 0.000000] Bus #1 is ISA [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 09 [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0b [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 10, APIC ID 0, APIC INT 0b [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 14, APIC ID 0, APIC INT 0a [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 18, APIC ID 0, APIC INT 0a [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 1c, APIC ID 0, APIC INT 0b [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 20, APIC ID 0, APIC INT 0b [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 24, APIC ID 0, APIC INT 0a [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 28, APIC ID 0, APIC INT 0a [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Lint: type 3, pol 0, trig 0, bus 01, IRQ 00, APIC ID 0, APIC LINT 00 [ 0.000000] Lint: type 1, pol 0, trig 0, bus 01, IRQ 00, APIC ID ff, APIC LINT 01 [ 0.000000] Processors: 1 [ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x10000000-0xfffbffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64519 [ 0.000000] Kernel command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-a06-0818/next:master/.vmlinuz-1e712b0818569846d6b926ecb6bf32b3dea73609-20130818122400-2-ant branch=next/master noapic nolapic nohz=off BOOT_IMAGE=/kernel/x86_64-randconfig-a06-0818/1e712b0818569846d6b926ecb6bf32b3dea73609/vmlinuz-3.11.0-rc5-next-20130816-05970-g1e712b0 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.000000] Memory: 200988K/261744K available (8847K kernel code, 1406K rwdata, 3728K rodata, 772K init, 9992K bss, 60756K reserved) [ 0.000000] NR_IRQS:4352 nr_irqs:256 16 [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 5855 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] allocated 1048576 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 2 of 2 active objects replaced [ 0.000000] ODEBUG: selftest passed [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3192.002 MHz processor [ 0.008000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.00 BogoMIPS (lpj=3192002) [ 0.009200] pid_max: default: 4096 minimum: 301 [ 0.013346] Mount-cache hash table entries: 256 [ 0.035153] Initializing cgroup subsys debug [ 0.036525] Initializing cgroup subsys memory [ 0.039501] Initializing cgroup subsys devices [ 0.040379] Initializing cgroup subsys perf_event [ 0.045931] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.045931] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.045931] tlb_flushall_shift: -1 [ 0.046109] CPU: AMD QEMU Virtual CPU version 1.5.0 (fam: 06, model: 02, stepping: 03) [ 0.071506] ACPI: Core revision 20130725 [ 0.176164] ACPI: All ACPI Tables successfully acquired [ 0.177118] ACPI: setting ELCR to 0200 (from 0c00) [ 0.202417] Performance Events: [ 0.203212] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.203717] no hardware sampling interrupt available. [ 0.204471] Broken PMU hardware detected, using software events only. [ 0.205119] Failed to access perfctr msr (MSR c0010004 is 0) [ 0.226765] Apic disabled [ 0.230628] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.256529] devtmpfs: initialized [ 0.290694] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.292524] RTC time: 4:22:37, date: 08/18/13 [ 0.298080] NET: Registered protocol family 16 [ 0.325437] cpuidle: using governor ladder [ 0.326299] cpuidle: using governor menu [ 0.337588] ACPI: bus type PCI registered [ 0.339229] dca service started, version 1.12.1 [ 0.342664] PCI: Using configuration type 1 for base access [ 0.684349] ACPI: Added _OSI(Module Device) [ 0.684718] ACPI: Added _OSI(Processor Device) [ 0.685091] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.685427] ACPI: Added _OSI(Processor Aggregator Device) [ 0.724282] ACPI: EC: Look up EC in DSDT [ 0.914358] ACPI: Interpreter enabled [ 0.915366] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571) [ 0.916479] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571) [ 0.919155] ACPI: (supports S0 S3 S5) [ 0.919576] ACPI: Using PIC for interrupt routing [ 0.921589] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.965289] ACPI: No dock devices found. [ 1.355965] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.376316] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 1.382270] PCI host bridge to bus 0000:00 [ 1.383352] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.384383] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 1.385105] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 1.385570] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 1.386111] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 1.389478] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 1.406351] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 1.412298] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 1.422157] pci 0000:00:01.1: reg 0x20: [io 0xc1e0-0xc1ef] [ 1.436230] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 1.438541] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 1.439172] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 1.449545] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 1.453166] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 1.457123] pci 0000:00:02.0: reg 0x14: [mem 0xfebe0000-0xfebe0fff] [ 1.472158] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 1.478164] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 [ 1.480124] pci 0000:00:03.0: reg 0x10: [io 0xc1c0-0xc1df] [ 1.484121] pci 0000:00:03.0: reg 0x14: [mem 0xfebe1000-0xfebe1fff] [ 1.497123] pci 0000:00:03.0: reg 0x30: [mem 0xfebd0000-0xfebdffff pref] [ 1.507493] pci 0000:00:04.0: [8086:100e] type 00 class 0x020000 [ 1.510125] pci 0000:00:04.0: reg 0x10: [mem 0xfeb80000-0xfeb9ffff] [ 1.512120] pci 0000:00:04.0: reg 0x14: [io 0xc000-0xc03f] [ 1.524220] pci 0000:00:04.0: reg 0x30: [mem 0xfeba0000-0xfebbffff pref] [ 1.534151] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 1.536129] pci 0000:00:05.0: reg 0x10: [io 0xc040-0xc07f] [ 1.540122] pci 0000:00:05.0: reg 0x14: [mem 0xfebe2000-0xfebe2fff] [ 1.564217] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 1.566243] pci 0000:00:06.0: reg 0x10: [io 0xc080-0xc0bf] [ 1.569123] pci 0000:00:06.0: reg 0x14: [mem 0xfebe3000-0xfebe3fff] [ 1.591372] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 1.594126] pci 0000:00:07.0: reg 0x10: [io 0xc0c0-0xc0ff] [ 1.597131] pci 0000:00:07.0: reg 0x14: [mem 0xfebe4000-0xfebe4fff] [ 1.618331] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 1.621158] pci 0000:00:08.0: reg 0x10: [io 0xc100-0xc13f] [ 1.623240] pci 0000:00:08.0: reg 0x14: [mem 0xfebe5000-0xfebe5fff] [ 1.645218] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 1.647240] pci 0000:00:09.0: reg 0x10: [io 0xc140-0xc17f] [ 1.650139] pci 0000:00:09.0: reg 0x14: [mem 0xfebe6000-0xfebe6fff] [ 1.672407] pci 0000:00:0a.0: [1af4:1001] type 00 class 0x010000 [ 1.675127] pci 0000:00:0a.0: reg 0x10: [io 0xc180-0xc1bf] [ 1.678103] pci 0000:00:0a.0: reg 0x14: [mem 0xfebe7000-0xfebe7fff] [ 1.699623] pci 0000:00:0b.0: [8086:25ab] type 00 class 0x088000 [ 1.702124] pci 0000:00:0b.0: reg 0x10: [mem 0xfebe8000-0xfebe800f] [ 1.725295] pci_bus 0000:00: on NUMA node 0 [ 1.726207] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 1.726792] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 1.766586] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 1.776525] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 1.785454] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 1.793649] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 1.798211] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 1.827000] ACPI: Enabled 16 GPEs in block 00 to 0F [ 1.828306] ACPI: \_SB_.PCI0: notify handler is installed [ 1.831434] Found 1 acpi root devices [ 1.849000] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.849229] vgaarb: loaded [ 1.849538] vgaarb: bridge control possible 0000:00:02.0 [ 1.856242] tps65010: version 2 May 2005 [ 1.883715] tps65010: no chip? [ 1.893541] Linux video capture interface: v2.00 [ 1.895665] pps_core: LinuxPPS API ver. 1 registered [ 1.896101] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.897372] PTP clock support registered [ 1.899270] EDAC MC: Ver: 3.0.0 [ 1.906272] wmi: Mapper loaded [ 1.910710] PCI: Using ACPI for IRQ routing [ 1.911429] PCI: pci_cache_line_size set to 64 bytes [ 1.914541] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 1.915545] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff] [ 1.947823] NET: Registered protocol family 23 [ 1.950460] Bluetooth: Core ver 2.16 [ 1.951617] NET: Registered protocol family 31 [ 1.952124] Bluetooth: HCI device and connection manager initialized [ 1.953512] Bluetooth: HCI socket layer initialized [ 1.954306] Bluetooth: L2CAP socket layer initialized [ 1.955629] Bluetooth: SCO socket layer initialized [ 1.956221] NET: Registered protocol family 8 [ 1.957105] NET: Registered protocol family 20 [ 1.963601] nfc: nfc_init: NFC Core ver 0.1 [ 1.966349] NET: Registered protocol family 39 [ 1.974519] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 1.985000] Switched to clocksource hpet [ 1.990223] FS-Cache: Loaded [ 1.991634] pnp: PnP ACPI init [ 1.993379] ACPI: bus type PNP registered [ 2.004683] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.009099] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 2.012378] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 2.016241] pnp 00:03: [dma 2] [ 2.018104] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 2.022300] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 2.026463] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.039280] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 2.048180] pnp: PnP ACPI: found 7 devices [ 2.048622] ACPI: bus type PNP unregistered [ 2.049317] INFO_MDMA: LNW DMA Driver Version 1.1.0 [ 2.082628] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.083445] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.084142] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.084571] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 2.086275] NET: Registered protocol family 1 [ 2.087160] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 2.087719] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 2.089132] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 2.090075] pci 0000:00:02.0: Boot video device [ 2.091261] PCI: CLS 0 bytes, default 64 [ 2.106653] Unpacking initramfs... [ 16.006937] Freeing initrd memory: 23656K (ffff88000e8d6000 - ffff88000fff0000) [ 16.492509] DMA-API: preallocated 65536 debug entries [ 16.493264] DMA-API: debugging enabled by kernel config [ 16.513707] microcode: AMD CPU family 0x6 not supported [ 16.706453] sha256_ssse3: Neither AVX nor SSSE3 is available/usable. [ 16.707354] sha512_ssse3: Neither AVX nor SSSE3 is available/usable. [ 16.708081] AVX or AES-NI instructions are not detected. [ 16.708491] AVX instructions are not detected. [ 16.709125] AVX instructions are not detected. [ 16.709484] AVX instructions are not detected. [ 16.710113] AVX instructions are not detected. [ 16.724290] audit: initializing netlink socket (disabled) [ 16.727741] type=2000 audit(1376799773.725:1): initialized [ 16.748286] VFS: Disk quotas dquot_6.5.2 [ 16.749217] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 16.765374] jffs2: version 2.2. (NAND) (SUMMARY) [ 16.774343] ROMFS MTD (C) 2007 Red Hat, Inc. [ 16.775587] msgmni has been set to 438 [ 16.970205] alg: No test for crc32 (crc32-table) [ 16.977099] alg: No test for lz4hc (lz4hc-generic) [ 16.979144] alg: No test for stdrng (krng) [ 17.194694] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 17.200222] NET: Registered protocol family 38 [ 17.201544] Key type asymmetric registered [ 17.202464] Asymmetric key parser 'x509' registered [ 17.203188] list_sort_test: start testing list_sort() [ 17.238652] cr_bllcd: INTEL CARILLO RANCH LPC not found. [ 17.240526] cr_bllcd: Carillo Ranch Backlight Driver Initialized. [ 17.248416] nvidiafb_setup START [ 17.251743] VIA Graphics Integration Chipset framebuffer 2.4 initializing [ 17.257156] vmlfb: initializing [ 17.258301] Could not find Carillo Ranch MCH device. [ 17.262247] hgafb: HGA card not detected. [ 17.263072] hgafb: probe of hgafb.0 failed with error -22 [ 17.276357] cirrusfb 0000:00:02.0: Cirrus Logic chipset on PCI bus, RAM (4096 kB) at 0xfc000000 [ 17.300336] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 17.301679] ACPI: Power Button [PWRF] [ 17.316434] GHES: HEST is not enabled! [ 17.317149] ERST DBG: ERST support is disabled. [ 17.317516] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 17.355505] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 17.356517] PCI: setting IRQ 11 as level-triggered [ 17.359440] virtio-pci 0000:00:03.0: setting latency timer to 64 [ 17.390405] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 17.391116] PCI: setting IRQ 10 as level-triggered [ 17.393413] virtio-pci 0000:00:05.0: setting latency timer to 64 [ 17.421755] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 17.424689] virtio-pci 0000:00:06.0: setting latency timer to 64 [ 17.449132] virtio-pci 0000:00:07.0: setting latency timer to 64 [ 17.477441] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 17.481246] virtio-pci 0000:00:08.0: setting latency timer to 64 [ 17.506220] virtio-pci 0000:00:09.0: setting latency timer to 64 [ 17.533170] virtio-pci 0000:00:0a.0: setting latency timer to 64 [ 17.540083] tsc: Refined TSC clocksource calibration: 3191.999 MHz [ 17.541175] Switched to clocksource tsc [ 17.543226] HDLC line discipline maxframe=4096 [ 17.543601] N_HDLC line discipline registered. [ 17.545168] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 17.545644] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 17.576467] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 17.610504] Cyclades driver 2.6 [ 17.613165] MOXA Intellio family driver version 6.0k [ 17.615544] MOXA Smartio/Industio family driver version 2.0.5 [ 17.617319] RocketPort device driver module, version 2.09, 12-June-2003 [ 17.619036] No rocketport ports found; unloading driver [ 17.620343] SyncLink GT [ 17.621052] SyncLink GT, tty major#247 [ 17.622182] SyncLink GT no devices found [ 17.622522] SyncLink MultiPort driver $Revision: 4.38 $ [ 17.831470] SyncLink MultiPort driver $Revision: 4.38 $, tty major#246 [ 17.832322] SyncLink serial driver $Revision: 4.38 $ [ 18.042167] SyncLink serial driver $Revision: 4.38 $, tty major#245 [ 18.047184] Non-volatile memory driver v1.3 [ 18.048473] ppdev: user-space parallel port driver [ 18.049424] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 18.051129] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 18.051698] Hangcheck: Using getrawmonotonic(). [ 18.059054] parport_pc 00:04: reported by Plug and Play ACPI [ 18.062284] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] [ 18.088194] dummy-irq: no IRQ given. Use irq=N [ 18.090595] Phantom Linux Driver, version n0.9.8, init OK [ 18.106859] Driver for timberdale has been successfully registered. [ 18.118455] mtdoops: mtd device (mtddev=name/number) must be supplied [ 18.120269] device id = 2440 [ 18.120622] device id = 2480 [ 18.121189] device id = 24c0 [ 18.121471] device id = 24d0 [ 18.122002] device id = 25a1 [ 18.122288] device id = 2670 [ 18.124753] platform physmap-flash.0: failed to claim resource 0 [ 18.126158] NetSc520 flash device: 0x100000 at 0x200000 [ 18.127095] Failed to ioremap_nocache [ 18.127448] Failed to ioremap_nocache [ 18.128503] Generic platform RAM MTD, (c) 2004 Simtec Electronics [ 18.131188] slram: not enough parameters. [ 18.171138] No valid DiskOnChip devices found [ 18.176190] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 18.177069] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 18.177644] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 18.178517] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 18.179380] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 18.180227] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 18.181626] NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 128MiB 1,8V 8-bit), 128MiB, page size: 512, OOB size: 16 [ 18.185118] flash size: 128 MiB [ 18.185394] page size: 512 bytes [ 18.185651] OOB area size: 16 bytes [ 18.186230] sector size: 16 KiB [ 18.186492] pages number: 262144 [ 18.187008] pages per sector: 32 [ 18.187274] bus width: 8 [ 18.187495] bits in sector size: 14 [ 18.188044] bits in page size: 9 [ 18.188315] bits in OOB size: 4 [ 18.188573] flash size with OOB: 135168 KiB [ 18.189177] page address bytes: 4 [ 18.189447] sector address bytes: 3 [ 18.189750] options: 0x42 [ 18.209269] Scanning device for bad blocks [ 18.830386] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit": [ 18.831689] 0x000000000000-0x000008000000 : "NAND simulator partition 0" [ 18.965408] parport0: AVR Butterfly [ 18.970276] HSI/SSI char device loaded [ 18.979201] I2O subsystem v1.325 [ 18.979535] i2o: max drivers = 8 [ 18.983443] I2O Bus Adapter OSM v1.317 [ 18.984427] I2O ProcFS OSM v1.316 [ 18.994069] VFIO - User Level meta-driver version: 0.3 [ 19.000644] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 19.010135] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 19.012130] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 19.020444] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0) [ 19.046181] apanel: Fujitsu BIOS signature 'FJKEYINF' not found... [ 19.073309] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 19.074867] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 19.092468] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 [ 19.104051] i2c-parport-light: adapter type unspecified [ 19.115859] saa7146: register extension 'budget dvb' [ 19.117200] saa7146: register extension 'budget_patch dvb' [ 19.118375] saa7146: register extension 'av7110' [ 19.119515] nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas [ 19.121024] Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH [ 19.123292] saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 19.137172] pps_ldisc: PPS line discipline registered [ 19.137573] pps_parport: parallel port PPS client [ 19.138425] parport0: cannot grant exclusive access for device pps_parport [ 19.139261] pps_parport: couldn't register with parport0 [ 19.140362] Driver for 1-wire Dallas network protocol. [ 19.144178] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 19.147071] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 19.192042] w83793: Detection failed at check vendor id [ 19.198005] w83793: Detection failed at check vendor id [ 19.204026] w83793: Detection failed at check vendor id [ 19.210006] w83793: Detection failed at check vendor id [ 19.215148] i2c i2c-0: w83795: Detection failed at addr 0x2c, check bank [ 19.219031] i2c i2c-0: w83795: Detection failed at addr 0x2d, check bank [ 19.223028] i2c i2c-0: w83795: Detection failed at addr 0x2e, check bank [ 19.227026] i2c i2c-0: w83795: Detection failed at addr 0x2f, check bank [ 19.232062] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 19.236027] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 19.240020] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 19.244042] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 19.248022] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 19.252020] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 19.256021] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 19.260018] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 19.282067] i2c i2c-0: ADM1025 detection failed at 0x2c [ 19.286026] i2c i2c-0: ADM1025 detection failed at 0x2d [ 19.290025] i2c i2c-0: ADM1025 detection failed at 0x2e [ 19.393067] i2c i2c-0: detect fail: address match, 0x2c [ 19.397026] i2c i2c-0: detect fail: address match, 0x2d [ 19.401026] i2c i2c-0: detect fail: address match, 0x2e [ 19.405024] i2c i2c-0: detect fail: address match, 0x2f [ 19.411121] (null): Wrong manufacturer ID. Got 255, expected 65 [ 19.415023] (null): Wrong manufacturer ID. Got 255, expected 65 [ 19.419023] (null): Wrong manufacturer ID. Got 255, expected 65 [ 19.517192] f71882fg: Not a Fintek device [ 19.517611] f71882fg: Not a Fintek device [ 19.531068] (null): Unknown chip type, skipping [ 19.535016] (null): Unknown chip type, skipping [ 19.633070] i2c i2c-0: Unsupported chip (man_id=0xFF, chip_id=0xFF) [ 19.647027] i2c i2c-0: Unsupported chip (man_id=0xFF, chip_id=0xFF) [ 19.661027] i2c i2c-0: Unsupported chip (man_id=0xFF, chip_id=0xFF) [ 21.012219] i2c i2c-0: Unsupported chip at 0x18 (man_id=0xFF, chip_id=0xFF) [ 21.023001] i2c i2c-0: Unsupported chip at 0x19 (man_id=0xFF, chip_id=0xFF) [ 21.032998] i2c i2c-0: Unsupported chip at 0x1a (man_id=0xFF, chip_id=0xFF) [ 21.042999] i2c i2c-0: Unsupported chip at 0x29 (man_id=0xFF, chip_id=0xFF) [ 21.052998] i2c i2c-0: Unsupported chip at 0x2a (man_id=0xFF, chip_id=0xFF) [ 21.062999] i2c i2c-0: Unsupported chip at 0x2b (man_id=0xFF, chip_id=0xFF) [ 21.073021] i2c i2c-0: Unsupported chip at 0x48 (man_id=0xFF, chip_id=0xFF) [ 21.082999] i2c i2c-0: Unsupported chip at 0x49 (man_id=0xFF, chip_id=0xFF) [ 21.092999] i2c i2c-0: Unsupported chip at 0x4a (man_id=0xFF, chip_id=0xFF) [ 21.102999] i2c i2c-0: Unsupported chip at 0x4b (man_id=0xFF, chip_id=0xFF) [ 21.113041] i2c i2c-0: Unsupported chip at 0x4c (man_id=0xFF, chip_id=0xFF) [ 21.122998] i2c i2c-0: Unsupported chip at 0x4d (man_id=0xFF, chip_id=0xFF) [ 21.132998] i2c i2c-0: Unsupported chip at 0x4e (man_id=0xFF, chip_id=0xFF) [ 21.142998] i2c i2c-0: Unsupported chip at 0x4f (man_id=0xFF, chip_id=0xFF) [ 21.186037] i2c i2c-0: MAX1619 detection failed at 0x18 [ 21.194015] i2c i2c-0: MAX1619 detection failed at 0x19 [ 21.201993] i2c i2c-0: MAX1619 detection failed at 0x1a [ 21.209993] i2c i2c-0: MAX1619 detection failed at 0x29 [ 21.217994] i2c i2c-0: MAX1619 detection failed at 0x2a [ 21.225994] i2c i2c-0: MAX1619 detection failed at 0x2b [ 21.234015] i2c i2c-0: MAX1619 detection failed at 0x4c [ 21.241994] i2c i2c-0: MAX1619 detection failed at 0x4d [ 21.249994] i2c i2c-0: MAX1619 detection failed at 0x4e [ 21.285613] pc87360: PC8736x not detected, module not inserted [ 21.289052] i2c i2c-0: amc6821_detect called. [ 21.293037] i2c i2c-0: amc6821: detection failed at 0x18. [ 21.294996] i2c i2c-0: amc6821_detect called. [ 21.298994] i2c i2c-0: amc6821: detection failed at 0x19. [ 21.300991] i2c i2c-0: amc6821_detect called. [ 21.304996] i2c i2c-0: amc6821: detection failed at 0x1a. [ 21.306992] i2c i2c-0: amc6821_detect called. [ 21.310993] i2c i2c-0: amc6821: detection failed at 0x2c. [ 21.312993] i2c i2c-0: amc6821_detect called. [ 21.316993] i2c i2c-0: amc6821: detection failed at 0x2d. [ 21.318991] i2c i2c-0: amc6821_detect called. [ 21.322992] i2c i2c-0: amc6821: detection failed at 0x2e. [ 21.324993] i2c i2c-0: amc6821_detect called. [ 21.328993] i2c i2c-0: amc6821: detection failed at 0x4c. [ 21.330994] i2c i2c-0: amc6821_detect called. [ 21.334996] i2c i2c-0: amc6821: detection failed at 0x4d. [ 21.336992] i2c i2c-0: amc6821_detect called. [ 21.340994] i2c i2c-0: amc6821: detection failed at 0x4e. [ 21.379042] i2c i2c-0: w83l785ts: Read 0xff from register 0x40. [ 21.379512] i2c i2c-0: W83L785TS-S detection failed at 0x2e [ 21.384059] i2c i2c-0: W83L786NG detection failed at 0x2e [ 21.387995] i2c i2c-0: W83L786NG detection failed at 0x2f [ 21.392376] intel_powerclamp: Intel powerclamp does not run on family 6 model 2 [ 21.393144] Bluetooth: Virtual HCI driver ver 1.3 [ 21.395513] Bluetooth: HCI UART driver ver 2.2 [ 21.429565] hidraw: raw HID events driver (C) Jiri Kosina [ 21.452656] compal_laptop: Motherboard not recognized (You could try the module's force-parameter) [ 21.457081] msi_wmi: This machine doesn't have neither MSI-hotkeys nor backlight through WMI [ 21.458458] toshiba_acpi: Unable to create proc dir toshiba [ 21.461207] intel_oaktrail: Platform not recognized (You could try the module's force-parameter) [ 21.463204] AMD IOMMUv2 driver by Joerg Roedel [ 21.463726] AMD IOMMUv2 functionality not available on this system [ 21.482293] fake-fmc-carrier: mezzanine 0 [ 21.483317] Manufacturer: fake-vendor [ 21.483639] Product name: fake-design-for-testing [ 21.486084] fmc fake-design-for-testing-f001: Driver has no ID: matches all [ 21.487025] fmc_write_eeprom fake-design-for-testing-f001: fmc_write_eeprom: no busid passed, refusing all cards [ 21.488373] fmc fake-design-for-testing-f001: Driver has no ID: matches all [ 21.492391] fmc_chardev fake-design-for-testing-f001: Created misc device "fake-design-for-testing-f001" [ 21.501222] Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98 [ 21.501982] aedsp16: I/O, IRQ and DMA are mandatory [ 21.502424] pss: mss_io, mss_dma, mss_irq and pss_io must be set. [ 21.503120] ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996 [ 21.504032] ad1848: No ISAPnP cards found, trying standard ones... [ 21.504531] Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996 [ 21.505290] I/O, IRQ, DMA and type are mandatory [ 21.505675] sb: Init: Starting Probe... [ 21.506973] sb: Init: Done [ 21.507735] uart6850: irq and io must be set. [ 21.508340] YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996 [ 21.509124] MIDI Loopback device driver [ 21.514339] oprofile: using timer interrupt. [ 21.516541] NET: Registered protocol family 26 [ 21.519619] NET: Registered protocol family 15 [ 21.522559] NET: Registered protocol family 5 [ 21.534411] IrCOMM protocol (Dag Brattli) [ 21.583455] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 21.584284] Bluetooth: HIDP socket layer initialized [ 21.585240] lec:lane_module_init: lec.c: initialized [ 21.588594] 8021q: 802.1Q VLAN Support v1.8 [ 21.592559] 9pnet: Installing 9P2000 support [ 21.597190] NET: Registered protocol family 37 [ 21.598193] NET: Registered protocol family 36 [ 21.601970] Key type dns_resolver registered [ 21.607008] batman_adv: B.A.T.M.A.N. advanced 2013.3.0 (compatibility version 14) loaded [ 21.607567] openvswitch: Open vSwitch switching datapath [ 21.611184] mpls_gso: MPLS GSO support [ 21.618160] [ 21.618160] printing PIC contents [ 21.618590] ... PIC IMR: ed78 [ 21.618894] ... PIC IRR: 0011 [ 21.619388] ... PIC ISR: 0000 [ 21.619666] ... PIC ELCR: 0e00 [ 21.638142] Key type trusted registered [ 21.647048] RIO: rio_register_scan for mport_id=-1 [ 21.651514] dmaengine: __dma_request_channel: fail ((null)) [ 21.657028] Magic number: 9:608:363 [ 21.664908] [ 21.664908] ===================================== [ 21.664908] [ BUG: bad unlock balance detected! ] [ 21.664908] 3.11.0-rc5-next-20130816-05970-g1e712b0 #17 Not tainted [ 21.664908] ------------------------------------- [ 21.664908] swapper/1 is trying to release lock (cpufreq_rwsem) at: [ 21.664908] [] cpufreq_add_dev+0x232/0x360 [ 21.664908] but there are no more locks to release! [ 21.664908] [ 21.664908] other info that might help us debug this: [ 21.664908] 1 lock held by swapper/1: [ 21.664908] #0: (subsys mutex){+.+.+.}, at: [] subsys_interface_register+0x54/0xf0 [ 21.664908] [ 21.664908] stack backtrace: [ 21.664908] CPU: 0 PID: 1 Comm: swapper Not tainted 3.11.0-rc5-next-20130816-05970-g1e712b0 #17 [ 21.664908] ffffffff8164fa12 ffff88000dc63ce8 ffffffff81886d70 ffff88000dc63d10 [ 21.664908] ffffffff810c755c ffffffff81d66b50 ffff88000dc59040 ffffffff8164fa12 [ 21.664908] ffff88000dc63d88 ffffffff810cbf56 ffffffff810c8430 000000070dc63d68 [ 21.664908] Call Trace: [ 21.664908] [] ? cpufreq_add_dev+0x232/0x360 [ 21.664908] [] dump_stack+0x19/0x1b [ 21.664908] [] print_unlock_imbalance_bug+0xec/0x100 [ 21.664908] [] ? cpufreq_add_dev+0x232/0x360 [ 21.664908] [] lock_release_non_nested+0x226/0x300 [ 21.664908] [] ? mark_held_locks+0xb0/0x130 [ 21.664908] [] ? kfree+0xe9/0x140 [ 21.664908] [] ? cpufreq_add_dev+0x232/0x360 [ 21.664908] [] lock_release+0x88/0x1b0 [ 21.664908] [] up_read+0x1a/0x40 [ 21.664908] [] cpufreq_add_dev+0x232/0x360 [ 21.664908] [] subsys_interface_register+0xa9/0xf0 [ 21.664908] [] cpufreq_register_driver+0x84/0x130 [ 21.664908] [] ? cpufreq_gov_dbs_init+0x12/0x12 [ 21.664908] [] acpi_cpufreq_init+0x51/0x134 [ 21.664908] [] do_one_initcall+0x8c/0x138 [ 21.664908] [] ? parse_args+0x1f8/0x330 [ 21.664908] [] kernel_init_freeable+0x113/0x18e [ 21.664908] [] ? do_early_param+0x88/0x88 [ 21.664908] [] ? rest_init+0x150/0x150 [ 21.664908] [] kernel_init+0x9/0x180 [ 21.664908] [] ret_from_fork+0x7a/0xb0 [ 21.664908] [] ? rest_init+0x150/0x150 [ 21.689085] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found [ 21.758668] Freeing unused kernel memory: 772K (ffffffff81dab000 - ffffffff81e6c000) /bin/sh: /proc/self/fd/9: No such file or directory plymouth-upstart-bridge: ply-event-loop.c:497: ply_event_loop_new: Assertion `loop->epoll_fd >= 0' failed. /bin/sh: /proc/self/fd/9: No such file or directory /etc/lsb-base-logging.sh: line 5: 132 Aborted plymouth --ping > /dev/null 2>&1 * Asking all remaining processes to terminate... killall5[135]: mount returned non-zero exit status killall5[135]: /proc not mounted, failed to mount. /etc/lsb-base-logging.sh: line 5: 137 Aborted plymouth --ping > /dev/null 2>&1 mount: proc has wrong device number or fs type proc not supported killall5[143]: mount returned non-zero exit status killall5[143]: /proc not mounted, failed to mount. /etc/lsb-base-logging.sh: line 5: 153 Aborted plymouth --ping > /dev/null 2>&1 * All processes ended within 1 seconds.... /etc/rc6.d/S40umountfs: line 20: /proc/mounts: No such file or directory cat: /proc/1/maps: No such file or directory cat: /proc/1/maps: No such file or directory cat: /proc/1/maps: No such file or directory cat: /proc/1/maps: No such file or directory cat: /proc/1/maps: No such file or directory cat: /proc/1/maps: No such file or directory umount: /var/run: not mounted umount: /var/lock: not mounted umount: /dev/shm: not mounted * Will now restart [ 44.618848] no ifx modem active; [ 44.647679] reboot: Restarting system [ 44.647839] reboot: machine restart Elapsed time: 55 qemu-system-x86_64 -kernel /tmp//kernel/x86_64-randconfig-a06-0818/1e712b0818569846d6b926ecb6bf32b3dea73609/vmlinuz-3.11.0-rc5-next-20130816-05970-g1e712b0-19071 -append 'hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-a06-0818/next:master/.vmlinuz-1e712b0818569846d6b926ecb6bf32b3dea73609-20130818122400-2-ant branch=next/master noapic nolapic nohz=off BOOT_IMAGE=/kernel/x86_64-randconfig-a06-0818/1e712b0818569846d6b926ecb6bf32b3dea73609/vmlinuz-3.11.0-rc5-next-20130816-05970-g1e712b0' -initrd /kernel-tests/initrd/quantal-core-x86_64.cgz -m 256M -smp 2 -net nic,vlan=0,macaddr=00:00:00:00:00:00,model=virtio -net user,vlan=0,hostfwd=tcp::23167-:22 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -drive file=/fs/sdc1/disk0-ant-19071,media=disk,if=virtio -drive file=/fs/sdc1/disk1-ant-19071,media=disk,if=virtio -drive file=/fs/sdc1/disk2-ant-19071,media=disk,if=virtio -drive file=/fs/sdc1/disk3-ant-19071,media=disk,if=virtio -drive file=/fs/sdc1/disk4-ant-19071,media=disk,if=virtio -drive file=/fs/sdc1/disk5-ant-19071,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-ant-lkp-19071 -serial file:/dev/shm/kboot/serial-ant-lkp-19071 -daemonize -display none -monitor null