[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <201308222256.03830.linux@rainbow-software.org>
Date: Thu, 22 Aug 2013 22:56:03 +0200
From: Ondrej Zary <linux@...nbow-software.org>
To: "Deucher, Alexander" <Alexander.Deucher@....com>
Cc: Kernel development list <linux-kernel@...r.kernel.org>
Subject: Re: Asus F5RL laptop unable to resume from S3 because of radeon module
On Thursday 22 August 2013 22:24:17 Deucher, Alexander wrote:
> > -----Original Message-----
> > From: Ondrej Zary [mailto:linux@...nbow-software.org]
> > Sent: Thursday, August 22, 2013 4:00 PM
> > To: Deucher, Alexander
> > Cc: Kernel development list
> > Subject: Re: Asus F5RL laptop unable to resume from S3 because of radeon
> > module
> >
> > On Thursday 22 August 2013 21:49:41 Deucher, Alexander wrote:
> > > > -----Original Message-----
> > > > From: Ondrej Zary [mailto:linux@...nbow-software.org]
> > > > Sent: Thursday, August 22, 2013 2:18 PM
> > > > To: Kernel development list
> > > > Cc: Deucher, Alexander
> > > > Subject: Asus F5RL laptop unable to resume from S3 because of radeon
> > > > module
> > > >
> > > > Hello,
> > > > resume from suspend-to-RAM (S3) on Asus F5RL laptop does not work.
> > > > According to many reports found by Google, it was always been that
> > > > and there
> > > > is no fix or workaround.
> > >
> > > Make sure your kernel has this patch:
> > > http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?
> > >id=c ef1d00cd56f600121ad121875655ad410a001b8
> >
> > Just tried latest git (3.11-rc6+) and the problem persists.
>
> You might try adding a quirk for your system in radeon_combios_asic_init()
> in radeon_combios.c. You can try something like this for testing:
>
> diff --git a/drivers/gpu/drm/radeon/radeon_combios.c
> b/drivers/gpu/drm/radeon/radeon_combios.c index 68ce360..0419a2c 100644
> --- a/drivers/gpu/drm/radeon/radeon_combios.c
> +++ b/drivers/gpu/drm/radeon/radeon_combios.c
> @@ -3398,6 +3398,8 @@ void radeon_combios_asic_init(struct drm_device *dev)
> rdev->pdev->subsystem_device == 0x30ae)
> return;
>
> + return;
> +
> /* DYN CLK 1 */
> table = combios_get_table_offset(dev, COMBIOS_DYN_CLK_1_TABLE);
> if (table)
>
> If that doesn't work, you'll probably have to track down where it's hanging
> during resume, or compare registers before and after resume to see if it's
> some particular state that's causing a problem.
No change.
Inserted "return -1;" before radeon_device_init() to
radeon_driver_load_kms() - driver fails to load and resume works.
Moved it (and changed to "r = -1; goto out;") a bit down before
radeon_modeset_init() - driver fails to load and resume stopped working.
> Alex
>
> > > Alex
> > >
> > > > Did some tests:
> > > >
> > > > radeon module loaded (usual state):
> > > > After "echo mem>/sys/power/state", the laptop suspends correctly
> >
> > (power
> >
> > > > LED
> > > > blinks). When power button is pressed, power LED goes on and that's
> > > > all. No more activity, machine is frozen completely.
> > > >
> > > > radeon module not loaded at all:
> > > > Laptop resumes correctly (keyboard LED work, network works), only the
> >
> > LCD
> >
> > > > is
> > > > blank (obviously). Loading radeon module now initializes the card
> > > > properly: LCD goes on and console works.
> > > >
> > > > radeon module loaded (but fbcon module not loaded) and then
> >
> > unloaded:
> > > > Machine freezes the same way as when the module is loaded.
> > > >
> > > > So it looks like the radeon module does some initialization that
> > > > prevents resume from working.
> > > >
> > > > Hibernation works fine.
> > > >
> > > > Any ideas what to test or how to debug this?
> > > >
> > > > Details:
> > > > 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices,
> > > > Inc. [AMD/ATI] RC410M [Mobility Radeon Xpress 200M] [1002:5a62]
> > > > (prog-if
> >
> > 00
> >
> > > > [VGA controller])
> > > > Subsystem: ASUSTeK Computer Inc. Device [1043:1402]
> > > > Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10
> > > > Memory at c0000000 (32-bit, prefetchable) [size=256M]
> > > > I/O ports at 9800 [size=256]
> > > > Memory at fa8f0000 (32-bit, non-prefetchable) [size=64K]
> > > > Expansion ROM at fa8c0000 [disabled] [size=128K]
> > > > Capabilities: [50] Power Management version 2
> > > > Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
> > > > Kernel driver in use: radeon
> > > >
> > > > [ 4.836009] [drm] radeon kernel modesetting enabled.
> > > > [ 4.837169] [drm] initializing kernel modesetting (RS400
> > > > 0x1002:0x5A62 0x1043:0x1402).
> > > > [ 4.837251] [drm] register mmio base: 0xFA8F0000
> > > > [ 4.837302] [drm] register mmio size: 65536
> > > > [ 4.837570] [drm] Generation 2 PCI interface, using max accessible
> > > > memory [ 4.837653] radeon 0000:01:05.0: VRAM: 128M
> >
> > 0x0000000078000000
> >
> > > > - 0x000000007FFFFFFF (128M used)
> > > > [ 4.837714] radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 -
> > > > 0x000000009FFFFFFF
> > > > [ 4.837787] [drm] Detected VRAM RAM=128M, BAR=256M
> > > > [ 4.837839] [drm] RAM width 128bits DDR
> > > > [ 4.839854] [TTM] Zone kernel: Available graphics memory: 444588
> > > > kiB [ 4.839907] [TTM] Zone highmem: Available graphics memory:
> > > > 972784
> >
> > kiB
> >
> > > > [ 4.839959] [TTM] Initializing pool allocator
> > > > [ 4.840042] [drm] radeon: 128M of VRAM memory ready
> > > > [ 4.840094] [drm] radeon: 512M of GTT memory ready.
> > > > [ 4.840160] [drm] GART: num cpu pages 131072, num gpu pages 131072
> > > > [ 4.866905] [drm] radeon: 2 quad pipes, 1 z pipes initialized.
> > > > [ 4.872945] [drm] PCIE GART of 512M enabled (table at
> > > > 0x0000000035A00000).
> > > > [ 4.873213] radeon 0000:01:05.0: WB enabled
> > > > [ 4.873301] radeon 0000:01:05.0: fence driver on ring 0 use gpu
> > > > addr 0x0000000080000000 and cpu addr 0xf592c000
> > > > [ 4.874929] [drm] Supports vblank timestamp caching Rev 1
> > > > (10.10.2010). [ 4.874988] [drm] Driver supports precise vblank
> > > > timestamp query. [ 4.875055] [drm] radeon: irq initialized.
> > > > [ 4.875119] [drm] Loading R300 Microcode
> > > > [ 4.962083] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> > > > [ 5.088150] ohci-pci: OHCI PCI platform driver
> > > > [ 5.141799] [drm] radeon: ring at 0x0000000080001000
> > > > [ 5.141883] [drm] ring test succeeded in 2 usecs
> > > > [ 5.142064] spurious 8259A interrupt: IRQ7.
> > > > [ 5.142073] [drm] ib test succeeded in 0 usecs
> > > > [ 5.142317] [drm] Panel ID String: LPL
> > > > [ 5.142370] [drm] Panel Size 1280x800
> > > > [ 5.166305] [drm] radeon legacy LVDS backlight initialized
> > > > [ 5.166358] [drm] Radeon Display Connectors
> > > > [ 5.166408] [drm] Connector 0:
> > > > [ 5.166458] [drm] VGA-1
> > > > [ 5.166509] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
> > > > [ 5.166560] [drm] Encoders:
> > > > [ 5.166610] [drm] CRT1: INTERNAL_DAC2
> > > > [ 5.166660] [drm] Connector 1:
> > > > [ 5.166710] [drm] LVDS-1
> > > > [ 5.166760] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4
> > > > 0x1a4 [ 5.166812] [drm] Encoders:
> > > > [ 5.166862] [drm] LCD1: INTERNAL_LVDS
> > > > [ 5.426968] [drm] fb mappable at 0xC0040000
> > > > [ 5.427026] [drm] vram apper at 0xC0000000
> > > > [ 5.427076] [drm] size 4096000
> > > > [ 5.427126] [drm] fb depth is 24
> > > > [ 5.427176] [drm] pitch is 5120
> > > > [ 5.427388] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer
> > > > device [ 5.427442] radeon 0000:01:05.0: registered panic notifier
> > > > [ 5.427501] [drm] Initialized radeon 2.34.0 20080528 for
> > > > 0000:01:05.0 on minor 0
> > > >
> > > > --
> > > > Ondrej Zary
> >
> > --
> > Ondrej Zary
--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists