lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1377260620-18829-17-git-send-email-lee.jones@linaro.org>
Date:	Fri, 23 Aug 2013 13:23:16 +0100
From:	Lee Jones <lee.jones@...aro.org>
To:	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc:	arnd@...db.de, linus.walleij@...aro.org,
	Lee Jones <lee.jones@...aro.org>
Subject: [PATCH 16/40] ARM: ux500: Purge SFH7741 Proximity Sensor support when booting with ATAGs

It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.

Signed-off-by: Lee Jones <lee.jones@...aro.org>
---
 arch/arm/mach-ux500/board-mop500.c | 75 --------------------------------------
 1 file changed, 75 deletions(-)

diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index e0db81d..fd1e0bc 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -30,7 +30,6 @@
 #include <linux/mfd/abx500/ab8500-gpio.h>
 #include <linux/platform_data/leds-lp55xx.h>
 #include <linux/input.h>
-#include <linux/gpio_keys.h>
 #include <linux/delay.h>
 #include <linux/leds.h>
 #include <linux/pinctrl/consumer.h>
@@ -63,59 +62,6 @@ static void __init mop500_i2c_init(struct device *parent)
 	db8500_add_i2c3(parent, NULL);
 }
 
-static struct gpio_keys_button mop500_gpio_keys[] = {
-	{
-		.desc			= "SFH7741 Proximity Sensor",
-		.type			= EV_SW,
-		.code			= SW_FRONT_PROXIMITY,
-		.active_low		= 0,
-		.can_disable		= 1,
-	}
-};
-
-static struct regulator *prox_regulator;
-static int mop500_prox_activate(struct device *dev);
-static void mop500_prox_deactivate(struct device *dev);
-
-static struct gpio_keys_platform_data mop500_gpio_keys_data = {
-	.buttons	= mop500_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(mop500_gpio_keys),
-	.enable		= mop500_prox_activate,
-	.disable	= mop500_prox_deactivate,
-};
-
-static struct platform_device mop500_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &mop500_gpio_keys_data,
-	},
-};
-
-static int mop500_prox_activate(struct device *dev)
-{
-	prox_regulator = regulator_get(&mop500_gpio_keys_device.dev,
-						"vcc");
-	if (IS_ERR(prox_regulator)) {
-		dev_err(&mop500_gpio_keys_device.dev,
-			"no regulator\n");
-		return PTR_ERR(prox_regulator);
-	}
-
-	return regulator_enable(prox_regulator);
-}
-
-static void mop500_prox_deactivate(struct device *dev)
-{
-	regulator_disable(prox_regulator);
-	regulator_put(prox_regulator);
-}
-
-/* add any platform devices here - TODO */
-static struct platform_device *mop500_platform_devs[] __initdata = {
-	&mop500_gpio_keys_device,
-};
-
 #ifdef CONFIG_STE_DMA40
 static struct stedma40_chan_cfg ssp0_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
@@ -223,20 +169,12 @@ static void __init mop500_uart_init(struct device *parent)
 static void __init mop500_init_machine(void)
 {
 	struct device *parent = NULL;
-	int i;
 
 	platform_device_register(&db8500_prcmu_device);
-	mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
 
 	mop500_pinmaps_init();
 	parent = u8500_init_devices();
 
-	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
-		mop500_platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(mop500_platform_devs,
-			ARRAY_SIZE(mop500_platform_devs));
-
 	mop500_i2c_init(parent);
 	mop500_sdi_init(parent);
 	mop500_spi_init(parent);
@@ -267,25 +205,12 @@ static void __init snowball_init_machine(void)
 static void __init hrefv60_init_machine(void)
 {
 	struct device *parent = NULL;
-	int i;
 
 	platform_device_register(&db8500_prcmu_device);
-	/*
-	 * The HREFv60 board removed a GPIO expander and routed
-	 * all these GPIO pins to the internal GPIO controller
-	 * instead.
-	 */
-	mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
 
 	hrefv60_pinmaps_init();
 	parent = u8500_init_devices();
 
-	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
-		mop500_platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(mop500_platform_devs,
-			ARRAY_SIZE(mop500_platform_devs));
-
 	mop500_i2c_init(parent);
 	hrefv60_sdi_init(parent);
 	mop500_spi_init(parent);
-- 
1.8.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ