[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1377529823-5116-5-git-send-email-ikerpedrosam@gmail.com>
Date: Mon, 26 Aug 2013 17:10:03 +0200
From: Iker Pedrosa <ikerpedrosam@...il.com>
To: pavel@....cz
Cc: gregkh@...uxfoundation.org, ikerpedrosam@...il.com,
justinmattock@...il.com, harsh1kumar@...il.com,
dan.carpenter@...cle.com, mujeeb.adil@...il.com,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org
Subject: [PATCH 04/24] Staging: winbond: phy_calibration: fixed some lines over 80 characters
First of the patches that fixes the lines over 80 characters in phy_calibration.c
Signed-off-by: Iker Pedrosa <ikerpedrosam@...il.com>
---
drivers/staging/winbond/phy_calibration.c | 46 ++++++++++++++++++-------------
1 file changed, 27 insertions(+), 19 deletions(-)
diff --git a/drivers/staging/winbond/phy_calibration.c b/drivers/staging/winbond/phy_calibration.c
index cfbfbbb..6635c85 100644
--- a/drivers/staging/winbond/phy_calibration.c
+++ b/drivers/staging/winbond/phy_calibration.c
@@ -27,10 +27,12 @@
#define DEG2RAD(X) (0.017453 * (X))
static const s32 Angles[] = {
- FIXED(DEG2RAD(45.0)), FIXED(DEG2RAD(26.565)), FIXED(DEG2RAD(14.0362)),
- FIXED(DEG2RAD(7.12502)), FIXED(DEG2RAD(3.57633)), FIXED(DEG2RAD(1.78991)),
- FIXED(DEG2RAD(0.895174)), FIXED(DEG2RAD(0.447614)), FIXED(DEG2RAD(0.223811)),
- FIXED(DEG2RAD(0.111906)), FIXED(DEG2RAD(0.055953)), FIXED(DEG2RAD(0.027977))
+ FIXED(DEG2RAD(45.0)), FIXED(DEG2RAD(26.565)),
+ FIXED(DEG2RAD(14.0362)), FIXED(DEG2RAD(7.12502)),
+ FIXED(DEG2RAD(3.57633)), FIXED(DEG2RAD(1.78991)),
+ FIXED(DEG2RAD(0.895174)), FIXED(DEG2RAD(0.447614)),
+ FIXED(DEG2RAD(0.223811)), FIXED(DEG2RAD(0.111906)),
+ FIXED(DEG2RAD(0.055953)), FIXED(DEG2RAD(0.027977))
};
/****************** LOCAL FUNCTION DECLARATION SECTION **********************/
@@ -296,7 +298,8 @@ void _sin_cos(s32 angle, s32 *sin, s32 *cos)
}
}
-static unsigned char hal_get_dxx_reg(struct hw_data *pHwData, u16 number, u32 *pValue)
+static unsigned char hal_get_dxx_reg(struct hw_data *pHwData, u16 number,
+ u32 *pValue)
{
if (number < 0x1000)
number += 0x1000;
@@ -304,7 +307,8 @@ static unsigned char hal_get_dxx_reg(struct hw_data *pHwData, u16 number, u32 *p
}
#define hw_get_dxx_reg(_A, _B, _C) hal_get_dxx_reg(_A, _B, (u32 *)_C)
-static unsigned char hal_set_dxx_reg(struct hw_data *pHwData, u16 number, u32 value)
+static unsigned char hal_set_dxx_reg(struct hw_data *pHwData, u16 number,
+ u32 value)
{
unsigned char ret;
@@ -407,7 +411,8 @@ void _rxadc_dc_offset_cancellation_winbond(struct hw_data *phw_data, u32 frequen
PHY_DEBUG(("[CAL] ** adc_dc_cal_i = %d (0x%04X)\n",
_s9_to_s32(val&0x000001FF), val&0x000001FF));
PHY_DEBUG(("[CAL] ** adc_dc_cal_q = %d (0x%04X)\n",
- _s9_to_s32((val&0x0003FE00)>>9), (val&0x0003FE00)>>9));
+ _s9_to_s32((val&0x0003FE00)>>9),
+ (val&0x0003FE00)>>9));
#endif
hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &val);
@@ -535,7 +540,8 @@ void _txidac_dc_offset_cancellation_winbond(struct hw_data *phw_data)
}
PHY_DEBUG(("[CAL] ** fix_cancel_dc_i = %d (0x%04X)\n",
- fix_cancel_dc_i, _s32_to_s5(fix_cancel_dc_i)));
+ fix_cancel_dc_i,
+ _s32_to_s5(fix_cancel_dc_i)));
if ((abs(mag_1-mag_0)*6) > mag_0)
break;
@@ -711,7 +717,8 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
loop = LOOP_TIMES;
while (loop > 0) {
- PHY_DEBUG(("[CAL] [%d.] <_tx_iq_calibration_loop>\n", (LOOP_TIMES-loop+1)));
+ PHY_DEBUG(("[CAL] [%d.] <_tx_iq_calibration_loop>\n",
+ (LOOP_TIMES-loop+1)));
iqcal_tone_i_avg = 0;
iqcal_tone_q_avg = 0;
@@ -719,8 +726,8 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
return 0;
for (capture_time = 0; capture_time < 10; capture_time++) {
/*
- * a. Set iqcal_mode[1:0] to 0x2 and set "calib_start" to 0x1 to
- * enable "IQ calibration Mode II"
+ * a. Set iqcal_mode[1:0] to 0x2 and set "calib_start"
+ * to 0x1 to enable "IQ calibration Mode II"
*/
reg_mode_ctrl &= ~(MASK_IQCAL_TONE_SEL|MASK_IQCAL_MODE);
reg_mode_ctrl &= ~MASK_IQCAL_MODE;
@@ -749,8 +756,8 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
/*
- * d. Set iqcal_mode[1:0] to 0x3 and set "calib_start" to 0x1 to
- * enable "IQ calibration Mode II"
+ * d. Set iqcal_mode[1:0] to 0x3 and set "calib_start"
+ * to 0x1 to enable "IQ calibration Mode II"
*/
/* hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &val); */
hw_get_dxx_reg(phw_data, REG_MODE_CTRL, ®_mode_ctrl);
@@ -766,7 +773,7 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
iqcal_tone_i = _s13_to_s32(val & 0x00001FFF);
iqcal_tone_q = _s13_to_s32((val & 0x03FFE000) >> 13);
PHY_DEBUG(("[CAL] ** iqcal_tone_i = %d, iqcal_tone_q = %d\n",
- iqcal_tone_i, iqcal_tone_q));
+ iqcal_tone_i, iqcal_tone_q));
if (capture_time == 0)
continue;
else {
@@ -1146,7 +1153,8 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre
/* for (loop = 0; loop < LOOP_TIMES; loop++) */
loop = LOOP_TIMES;
while (loop > 0) {
- PHY_DEBUG(("[CAL] [%d.] <_rx_iq_calibration_loop>\n", (LOOP_TIMES-loop+1)));
+ PHY_DEBUG(("[CAL] [%d.] <_rx_iq_calibration_loop>\n",
+ (LOOP_TIMES-loop+1)));
iqcal_tone_i_avg = 0;
iqcal_tone_q_avg = 0;
iqcal_image_i_avg = 0;
@@ -1199,13 +1207,13 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre
/* d. */
rot_tone_i_b = (iqcal_tone_i * iqcal_tone_i +
- iqcal_tone_q * iqcal_tone_q) / 1024;
+ iqcal_tone_q * iqcal_tone_q) / 1024;
rot_tone_q_b = (iqcal_tone_i * iqcal_tone_q * (-1) +
- iqcal_tone_q * iqcal_tone_i) / 1024;
+ iqcal_tone_q * iqcal_tone_i) / 1024;
rot_image_i_b = (iqcal_image_i * iqcal_tone_i -
- iqcal_image_q * iqcal_tone_q) / 1024;
+ iqcal_image_q * iqcal_tone_q) / 1024;
rot_image_q_b = (iqcal_image_i * iqcal_tone_q +
- iqcal_image_q * iqcal_tone_i) / 1024;
+ iqcal_image_q * iqcal_tone_i) / 1024;
PHY_DEBUG(("[CAL] ** rot_tone_i_b = %d\n", rot_tone_i_b));
PHY_DEBUG(("[CAL] ** rot_tone_q_b = %d\n", rot_tone_q_b));
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists