linux-kernel - [PATCH 12/24] Staging: winbond: reg: fixed some lines over 80 characters

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1377529823-5116-13-git-send-email-ikerpedrosam@gmail.com>
Date:	Mon, 26 Aug 2013 17:10:11 +0200
From:	Iker Pedrosa <ikerpedrosam@...il.com>
To:	pavel@....cz
Cc:	gregkh@...uxfoundation.org, ikerpedrosam@...il.com,
	justinmattock@...il.com, harsh1kumar@...il.com,
	dan.carpenter@...cle.com, mujeeb.adil@...il.com,
	devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org
Subject: [PATCH 12/24] Staging: winbond: reg: fixed some lines over 80 characters

Fourth of the patches that fixes the lines over 80 characters in reg.c

Signed-off-by: Iker Pedrosa <ikerpedrosam@...il.com>
---
 drivers/staging/winbond/reg.c | 33 ++++++++++++++++++++++-----------
 1 file changed, 22 insertions(+), 11 deletions(-)

diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
index 0cb0798..acdc003 100644
--- a/drivers/staging/winbond/reg.c
+++ b/drivers/staging/winbond/reg.c
@@ -1197,46 +1197,57 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 
 		/* ----- Calibration (3). RX baseband Gm-C filter auto-tuning */
 		/* Calibration (3a). turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFAEDC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (3b.0). RX filter auto-tuning BW: RFLBW=100 (TC5376A+corner default;) */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x07<<24) | 0x0C68CE, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x07<<24) | 0x0C68CE, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (3b). send RX reset signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x0F<<24) | 0x00401E, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x0F<<24) | 0x00401E, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (3c). turn-on RX Gm-C filter auto-tuning */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFEEDC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFEEDC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		udelay(150); /* Sleep 150 us */
 		/* Calibration (3e). turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFAEDC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 
 		/* ----- Calibration (4). TX LO leakage calibration */
 		/* Calibration (4a). TX LO leakage calibration */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFD6BC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFD6BC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		udelay(150); /* Sleep 150 us */
 
 		/* ----- Calibration (5). RX DC offset calibration */
 		/* Calibration (5a). turn off ENCAL signal and set to RX SW DC calibration mode */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFAEDC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (5b). turn off AGC servo-loop & RSSI */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x01<<24) | 0xEBFFC2, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x01<<24) | 0xEBFFC2, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 
 		/* for LNA=11 -------- */
 		/* Calibration (5c-h). RX DC offset current bias ON; & LNA=11; RXVGA=111111 */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x343FCC, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x06<<24) | 0x343FCC, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFF6DC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		usleep(2000);
 		/* Calibration (5f). turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFAEDC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 
 		/* for LNA=10 -------- */
-- 
1.8.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/