| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <00000140bca09c50-26aada97-96a9-423b-936b-15a296842a76-000000@email.amazonses.com>
Date: Mon, 26 Aug 2013 21:56:18 +0000
From: Christoph Lameter <cl@...ux.com>
To: Tejun Heo <tj@...nel.org>
Cc: linux-kernel@...r.kernel.org
Subject: [guv v2 27/31] sh: Replace __get_cpu_var uses throughout the kernel
__get_cpu_var() is used for multiple purposes in the kernel source. One of them is
address calculation via the form &__get_cpu_var(x). This calculates the address for
the instance of the percpu variable of the current processor based on an offset.
Others usage cases are for storing and retrieving data from the current processors percpu area.
__get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment.
__get_cpu_var() is defined as :
#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))
__get_cpu_var() always only does a address determination. However, store and retrieve operations
could use a segment prefix (or global register on other platforms) to avoid the address calculation.
this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use
optimized assembly code to read and write per cpu variables.
This patch converts __get_cpu_var into either and explicit address calculation using this_cpu_ptr()
or into a use of this_cpu operations that use the offset. Thereby address calcualtions are avoided
and less registers are used when code is generated.
At the end of the patchset all uses of __get_cpu_var have been removed so the macro is removed too.
The patchset includes passes over all arches as well. Once these operations are used throughout then
specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by
f.e. using a global register that may be set to the per cpu base.
Transformations done to __get_cpu_var()
1. Determine the address of the percpu instance of the current processor.
DEFINE_PER_CPU(int, y);
int *x = &__get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(&y);
2. Same as #1 but this time an array structure is involved.
DEFINE_PER_CPU(int, y[20]);
int *x = __get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(y);
3. Retrieve the content of the current processors instance of a per cpu variable.
DEFINE_PER_CPU(int, u);
int x = __get_cpu_var(y)
Converts to
int x = __this_cpu_read(y);
4. Retrieve the content of a percpu struct
DEFINE_PER_CPU(struct mystruct, y);
struct mystruct x = __get_cpu_var(y);
Converts to
memcpy(this_cpu_ptr(&y), x, sizeof(x));
5. Assignment to a per cpu variable
DEFINE_PER_CPU(int, y)
__get_cpu_var(y) = x;
Converts to
this_cpu_write(y, x);
6. Increment/Decrement etc of a per cpu variable
DEFINE_PER_CPU(int, y);
__get_cpu_var(y)++
Converts to
this_cpu_inc(y)
Index: linux/arch/sh/kernel/hw_breakpoint.c
===================================================================
--- linux.orig/arch/sh/kernel/hw_breakpoint.c 2013-08-26 13:25:18.000000000 -0500
+++ linux/arch/sh/kernel/hw_breakpoint.c 2013-08-26 13:28:32.265604741 -0500
@@ -52,7 +52,7 @@ int arch_install_hw_breakpoint(struct pe
int i;
for (i = 0; i < sh_ubc->num_events; i++) {
- struct perf_event **slot = &__get_cpu_var(bp_per_reg[i]);
+ struct perf_event **slot = this_cpu_ptr(&bp_per_reg[i]);
if (!*slot) {
*slot = bp;
@@ -84,7 +84,7 @@ void arch_uninstall_hw_breakpoint(struct
int i;
for (i = 0; i < sh_ubc->num_events; i++) {
- struct perf_event **slot = &__get_cpu_var(bp_per_reg[i]);
+ struct perf_event **slot = this_cpu_ptr(&bp_per_reg[i]);
if (*slot == bp) {
*slot = NULL;
Index: linux/arch/sh/kernel/kprobes.c
===================================================================
--- linux.orig/arch/sh/kernel/kprobes.c 2013-08-26 13:25:18.000000000 -0500
+++ linux/arch/sh/kernel/kprobes.c 2013-08-26 13:28:32.265604741 -0500
@@ -102,7 +102,7 @@ int __kprobes kprobe_handle_illslot(unsi
void __kprobes arch_remove_kprobe(struct kprobe *p)
{
- struct kprobe *saved = &__get_cpu_var(saved_next_opcode);
+ struct kprobe *saved = this_cpu_ptr(&saved_next_opcode);
if (saved->addr) {
arch_disarm_kprobe(p);
@@ -111,7 +111,7 @@ void __kprobes arch_remove_kprobe(struct
saved->addr = NULL;
saved->opcode = 0;
- saved = &__get_cpu_var(saved_next_opcode2);
+ saved = this_cpu_ptr(&saved_next_opcode2);
if (saved->addr) {
arch_disarm_kprobe(saved);
@@ -129,14 +129,14 @@ static void __kprobes save_previous_kpro
static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
{
- __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+ __this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
kcb->kprobe_status = kcb->prev_kprobe.status;
}
static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
struct kprobe_ctlblk *kcb)
{
- __get_cpu_var(current_kprobe) = p;
+ __this_cpu_write(current_kprobe, p);
}
/*
@@ -146,15 +146,15 @@ static void __kprobes set_current_kprobe
*/
static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
{
- __get_cpu_var(saved_current_opcode).addr = (kprobe_opcode_t *)regs->pc;
+ __this_cpu_write(saved_current_opcode.addr, (kprobe_opcode_t *)regs->pc);
if (p != NULL) {
struct kprobe *op1, *op2;
arch_disarm_kprobe(p);
- op1 = &__get_cpu_var(saved_next_opcode);
- op2 = &__get_cpu_var(saved_next_opcode2);
+ op1 = this_cpu_ptr(&saved_next_opcode);
+ op2 = this_cpu_ptr(&saved_next_opcode2);
if (OPCODE_JSR(p->opcode) || OPCODE_JMP(p->opcode)) {
unsigned int reg_nr = ((p->opcode >> 8) & 0x000F);
@@ -249,7 +249,7 @@ static int __kprobes kprobe_handler(stru
kcb->kprobe_status = KPROBE_REENTER;
return 1;
} else {
- p = __get_cpu_var(current_kprobe);
+ p = __this_cpu_read(current_kprobe);
if (p->break_handler && p->break_handler(p, regs)) {
goto ss_probe;
}
@@ -336,9 +336,9 @@ int __kprobes trampoline_probe_handler(s
continue;
if (ri->rp && ri->rp->handler) {
- __get_cpu_var(current_kprobe) = &ri->rp->kp;
+ __this_cpu_write(current_kprobe, &ri->rp->kp);
ri->rp->handler(ri, regs);
- __get_cpu_var(current_kprobe) = NULL;
+ __this_cpu_write(current_kprobe, NULL);
}
orig_ret_address = (unsigned long)ri->ret_addr;
@@ -383,19 +383,19 @@ static int __kprobes post_kprobe_handler
cur->post_handler(cur, regs, 0);
}
- p = &__get_cpu_var(saved_next_opcode);
+ p = this_cpu_ptr(&saved_next_opcode);
if (p->addr) {
arch_disarm_kprobe(p);
p->addr = NULL;
p->opcode = 0;
- addr = __get_cpu_var(saved_current_opcode).addr;
- __get_cpu_var(saved_current_opcode).addr = NULL;
+ addr = __this_cpu_read(saved_current_opcode).addr;
+ __this_cpu_write(saved_current_opcode.addr, NULL);
p = get_kprobe(addr);
arch_arm_kprobe(p);
- p = &__get_cpu_var(saved_next_opcode2);
+ p = this_cpu_ptr(&saved_next_opcode2);
if (p->addr) {
arch_disarm_kprobe(p);
p->addr = NULL;
@@ -511,7 +511,7 @@ int __kprobes kprobe_exceptions_notify(s
if (kprobe_handler(args->regs)) {
ret = NOTIFY_STOP;
} else {
- p = __get_cpu_var(current_kprobe);
+ p = __this_cpu_read(current_kprobe);
if (p->break_handler &&
p->break_handler(p, args->regs))
ret = NOTIFY_STOP;
Index: linux/arch/sh/kernel/localtimer.c
===================================================================
--- linux.orig/arch/sh/kernel/localtimer.c 2013-08-26 13:25:18.000000000 -0500
+++ linux/arch/sh/kernel/localtimer.c 2013-08-26 13:28:32.265604741 -0500
@@ -32,7 +32,7 @@ static DEFINE_PER_CPU(struct clock_event
*/
void local_timer_interrupt(void)
{
- struct clock_event_device *clk = &__get_cpu_var(local_clockevent);
+ struct clock_event_device *clk = this_cpu_ptr(&local_clockevent);
irq_enter();
clk->event_handler(clk);
Index: linux/arch/sh/kernel/perf_event.c
===================================================================
--- linux.orig/arch/sh/kernel/perf_event.c 2013-08-26 13:25:18.000000000 -0500
+++ linux/arch/sh/kernel/perf_event.c 2013-08-26 13:28:32.265604741 -0500
@@ -227,7 +227,7 @@ again:
static void sh_pmu_stop(struct perf_event *event, int flags)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
@@ -245,7 +245,7 @@ static void sh_pmu_stop(struct perf_even
static void sh_pmu_start(struct perf_event *event, int flags)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
@@ -262,7 +262,7 @@ static void sh_pmu_start(struct perf_eve
static void sh_pmu_del(struct perf_event *event, int flags)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
sh_pmu_stop(event, PERF_EF_UPDATE);
__clear_bit(event->hw.idx, cpuc->used_mask);
@@ -272,7 +272,7 @@ static void sh_pmu_del(struct perf_event
static int sh_pmu_add(struct perf_event *event, int flags)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
int ret = -EAGAIN;
Index: linux/arch/sh/kernel/smp.c
===================================================================
--- linux.orig/arch/sh/kernel/smp.c 2013-08-26 13:25:18.000000000 -0500
+++ linux/arch/sh/kernel/smp.c 2013-08-26 13:28:32.265604741 -0500
@@ -111,7 +111,7 @@ void play_dead_common(void)
irq_ctx_exit(raw_smp_processor_id());
mb();
- __get_cpu_var(cpu_state) = CPU_DEAD;
+ __this_cpu_write(cpu_state, CPU_DEAD);
local_irq_disable();
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists