| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <521DA82C.7020905@overkiz.com>
Date: Wed, 28 Aug 2013 09:35:08 +0200
From: boris brezillon <b.brezillon@...rkiz.com>
To: Nicolas Ferre <nicolas.ferre@...el.com>
CC: Rob Herring <rob.herring@...xeda.com>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Stephen Warren <swarren@...dotorg.org>,
Ian Campbell <ian.campbell@...rix.com>,
Rob Landley <rob@...dley.net>,
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>,
Linus Walleij <linus.walleij@...aro.org>,
Richard Genoud <richard.genoud@...il.com>,
Jiri Kosina <jkosina@...e.cz>, devicetree@...r.kernel.org,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH] pinctrl: at91: add support for OUTPUT config
On 28/08/2013 09:31, Nicolas Ferre wrote:
> On 27/08/2013 16:51, Boris BREZILLON :
>> Add support for pin output control through the pinctrl config:
>> - support enabling/disabling output on a given pin
>> - support output level setting (high or low)
>>
>> Signed-off-by: Boris BREZILLON <b.brezillon@...rkiz.com>
>> ---
>> .../bindings/pinctrl/atmel,at91-pinctrl.txt | 2 ++
>> drivers/pinctrl/pinctrl-at91.c | 22
>> ++++++++++++++++++++
>> include/dt-bindings/pinctrl/at91.h | 2 ++
>> 3 files changed, 26 insertions(+)
>>
>> diff --git
>> a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>> b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>> index cf7c7bc..5a22e0d 100644
>> --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>> +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>> @@ -90,6 +90,8 @@ MULTIDRIVE (1 << 1): indicate this pin need to
>> be configured as multidrive.
>> DEGLITCH (1 << 2): indicate this pin need deglitch.
>> PULL_DOWN (1 << 3): indicate this pin need a pull down.
>> DIS_SCHMIT (1 << 4): indicate this pin need to disable schmit
>> trigger.
>> +OUTPUT (1 << 5): indicate this pin need to be configured as
>> an output.
>> +OUTPUT_VAL (0x1 << 6): output val (1 = high, 0 = low)
>> DEBOUNCE (1 << 16): indicate this pin need debounce.
>> DEBOUNCE_VAL (0x3fff << 17): debounce val.
>>
>> diff --git a/drivers/pinctrl/pinctrl-at91.c
>> b/drivers/pinctrl/pinctrl-at91.c
>> index 19afb9a..1578a0d 100644
>> --- a/drivers/pinctrl/pinctrl-at91.c
>> +++ b/drivers/pinctrl/pinctrl-at91.c
>> @@ -61,6 +61,9 @@ static int gpio_banks;
>> #define DEGLITCH (1 << 2)
>> #define PULL_DOWN (1 << 3)
>> #define DIS_SCHMIT (1 << 4)
>> +#define OUTPUT (1 << 5)
>> +#define OUTPUT_VAL_SHIFT 6
>> +#define OUTPUT_VAL (0x1 << OUTPUT_VAL_SHIFT)
>> #define DEBOUNCE (1 << 16)
>> #define DEBOUNCE_VAL_SHIFT 17
>> #define DEBOUNCE_VAL (0x3fff << DEBOUNCE_VAL_SHIFT)
>> @@ -333,6 +336,19 @@ static void at91_mux_set_pullup(void __iomem
>> *pio, unsigned mask, bool on)
>> writel_relaxed(mask, pio + (on ? PIO_PUER : PIO_PUDR));
>> }
>>
>> +static bool at91_mux_get_output(void __iomem *pio, unsigned pin,
>> bool *val)
>> +{
>> + *val = (readl_relaxed(pio + PIO_ODSR) >> pin) & 0x1;
>> + return (readl_relaxed(pio + PIO_OSR) >> pin) & 0x1;
>> +}
>> +
>> +static void at91_mux_set_output(void __iomem *pio, unsigned mask,
>> bool is_on,
>> + bool val)
>> +{
>> + writel_relaxed(mask, pio + (val ? PIO_SODR : PIO_CODR));
>> + writel_relaxed(mask, pio + (is_on ? PIO_OER : PIO_ODR));
>> +}
>> +
>> static unsigned at91_mux_get_multidrive(void __iomem *pio, unsigned
>> pin)
>> {
>> return (readl_relaxed(pio + PIO_MDSR) >> pin) & 0x1;
>> @@ -712,6 +728,7 @@ static int at91_pinconf_get(struct pinctrl_dev
>> *pctldev,
>> void __iomem *pio;
>> unsigned pin;
>> int div;
>> + bool out;
>>
>> dev_dbg(info->dev, "%s:%d, pin_id=%d, config=0x%lx", __func__,
>> __LINE__, pin_id, *config);
>> pio = pin_to_controller(info, pin_to_bank(pin_id));
>> @@ -732,6 +749,9 @@ static int at91_pinconf_get(struct pinctrl_dev
>> *pctldev,
>> if (info->ops->get_schmitt_trig &&
>> info->ops->get_schmitt_trig(pio, pin))
>> *config |= DIS_SCHMIT;
>>
>> + if (at91_mux_get_output(pio, pin, &out))
>> + *config |= OUTPUT | (out << OUTPUT_VAL_SHIFT);
>> +
>> return 0;
>> }
>>
>> @@ -749,6 +769,8 @@ static int at91_pinconf_set(struct pinctrl_dev
>> *pctldev,
>> if (config & PULL_UP && config & PULL_DOWN)
>> return -EINVAL;
>>
>> + at91_mux_set_output(pio, mask, config & OUTPUT,
>> + (config & OUTPUT_VAL) >> OUTPUT_VAL_SHIFT);
>> at91_mux_set_pullup(pio, mask, config & PULL_UP);
>> at91_mux_set_multidrive(pio, mask, config & MULTI_DRIVE);
>> if (info->ops->set_deglitch)
>> diff --git a/include/dt-bindings/pinctrl/at91.h
>> b/include/dt-bindings/pinctrl/at91.h
>> index d7988b4..9fd4d48 100644
>> --- a/include/dt-bindings/pinctrl/at91.h
>> +++ b/include/dt-bindings/pinctrl/at91.h
>> @@ -15,6 +15,8 @@
>> #define AT91_PINCTRL_DEGLITCH (1 << 2)
>> #define AT91_PINCTRL_PULL_DOWN (1 << 3)
>> #define AT91_PINCTRL_DIS_SCHMIT (1 << 4)
>> +#define AT91_PINCTRL_OUTPUT (1 << 5)
>> +#define AT91_PINCTRL_OUTPUT_VAL(x) ((x & 0x1) << 6)
>
> Can you add this change to the documentation as well:
> Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>
>
>> #define AT91_PINCTRL_DEBOUNCE (1 << 16)
>> #define AT91_PINCTRL_DEBOUNCE_VA(x) (x << 17)
>
> Oh, we have a nice typo here! ---^^^^^^
> And moreover it would be good to add the mask as well.
Do you want me to fix this typo and add mask for DEBOUNCE
in a separate patch ?
>
>>
>>
>
> Once the documentation added, you can stick my:
>
> Acked-by: Nicolas Ferre <nicolas.ferre@...el.com>
>
> Thanks, bye,
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists