| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <5558391.npOBz8GkSU@amdc1032>
Date: Wed, 28 Aug 2013 12:06:27 +0200
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To: Naveen Krishna Chatradhi <ch.naveen@...sung.com>
Cc: linux-pm@...r.kernel.org, rui.zhang@...el.com,
eduardo.valentin@...com, linux-samsung-soc@...r.kernel.org,
linux-kernel@...r.kernel.org, amit.daniel@...sung.com,
kgene.kim@...sung.com, naveenkrishna.ch@...il.com,
devicetree@...r.kernel.org
Subject: Re: [PATCH 3/3] thermal: exynos: Handle the misplaced TRIMINFO register
Hi,
On Wednesday, August 28, 2013 11:15:19 AM Naveen Krishna Chatradhi wrote:
> This patch adds code to handle the misplaced TRIMINFO register
> incase of Exynos5420.
>
> On Exynos5420 we have a TRIMINFO register being misplaced for
> TMU channels 2, 3 and 4
>
> TRIMINFO at 0x1006c000 contains data for TMU channel 3
> TRIMINFO at 0x100a0000 contains data for TMU channel 4
> TRIMINFO at 0x10068000 contains data for TMU channel 2
>
> The misplaced register address is passed through devicetree and
> map it seperately during probe.
> Also, adds the documentation under devicetree/bindings/thermal/
>
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@...sung.com>
> ---
> .../devicetree/bindings/thermal/exynos-thermal.txt | 21 +++++++++++++
> drivers/thermal/samsung/exynos_tmu.c | 32 +++++++++++++++++---
> 2 files changed, 49 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
> index 284f530..e818473 100644
> --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
> +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
> @@ -7,12 +7,21 @@
> "samsung,exynos4210-tmu"
> "samsung,exynos5250-tmu"
> "samsung,exynos5440-tmu"
> + "samsung,exynos5420-tmu"
> - interrupt-parent : The phandle for the interrupt controller
> - reg : Address range of the thermal registers. For soc's which has multiple
> instances of TMU and some registers are shared across all TMU's like
> interrupt related then 2 set of register has to supplied. First set
> belongs to each instance of TMU and second set belongs to common TMU
> registers.
> +
> + ** NOTE FOR EXYNOS5420 **
> + TRIMINFO register is being misplaced for TMU channels 2, 3 and 4
> +
> + TERMINFO for TMU channel 2 is present in address space of TMU channel 3
> + TERMINFO for TMU channel 3 is present in address space of TMU channel 4
> + TERMINFO for TMU channel 4 is present in address space of TMU channel 2
> +
> - interrupts : Should contain interrupt for thermal system
> - clocks : The main clock for TMU device
> - clock-names : Thermal system clock name
> @@ -43,6 +52,18 @@ Example 2):
> clock-names = "tmu_apbif";
> };
>
> +Example 3): In case of Exynos5420 TMU channel 3
> +
> + /* tmu for CPU3 */
> + tmu@...6c000 {
> + compatible = "samsung,exynos5420-tmu";
> + /* 2nd reg is for the misplaced TRIMINFO register */
> + reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
> + interrupts = <0 185 0>;
> + clocks = <&clock 318>;
> + clock-names = "tmu_apbif";
> + };
> +
> Note: For multi-instance tmu each instance should have an alias correctly
> numbered in "aliases" node.
>
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index bfdfbd6..f95844e 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -42,6 +42,7 @@
> * @pdata: pointer to the tmu platform/configuration data
> * @base: base address of the single instance of the TMU controller.
> * @base_common: base address of the common registers of the TMU controller.
> + * @triminfo_base: misplaced register base for TRIMINFO on Exynos5420 only
> * @irq: irq number of the TMU controller.
> * @soc: id of the SOC type.
> * @irq_work: pointer to the irq work structure.
> @@ -57,6 +58,7 @@ struct exynos_tmu_data {
> struct exynos_tmu_platform_data *pdata;
> void __iomem *base;
> void __iomem *base_common;
> + void __iomem *triminfo_base; /* Needed only Exynos5420 */
> int irq;
> enum soc_type soc;
> struct work_struct irq_work;
> @@ -186,7 +188,12 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
> EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
> }
> } else {
> - trim_info = readl(data->base + reg->triminfo_data);
> + /* On exynos5420 TRIMINFO is misplaced for some channels */
> + if (data->triminfo_base)
> + trim_info = readl(data->triminfo_base +
> + reg->triminfo_data);
> + else
> + trim_info = readl(data->base + reg->triminfo_data);
If you always set data->triminfo_base (to data->base for EXYNOS SoCs
different from EXYNOS420) you could simplify the code above.
> }
> data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
> data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) &
> @@ -586,8 +593,17 @@ static int exynos_map_dt_data(struct platform_device *pdev)
> * Check if the TMU shares some registers and then try to map the
> * memory of common registers.
> */
> - if (!TMU_SUPPORTS(pdata, SHARED_MEMORY))
> + if (!TMU_SUPPORTS(pdata, SHARED_MEMORY)) {
Please use a different flag for this quirk (i.e. TRIMINFO_QUIRK) instead
of overloading SHARED_MEMORY. Then you can do:
if (TMU_SUPPORTS(pdata, TRIMINFO_QUIRK) {
...
} else
data->triminfo_base = data->base;
> + /* For Exynos5420 The misplaced TERMINFO register address will
> + * be passed from device tree node.
> + *
> + * We cannot use devm_request_and_ioremap, as the base address
> + * over laps with the address space of the other TMU channel.
> + * Check Documentation for details
> + */
> + data->triminfo_base = of_iomap(pdev->dev.of_node, 1);
Shouldn't there be a check here (for EXYNOS5420) for of_iomap()
return value != NULL here so if somebody makes an error in device
tree description it gets caught instead of failing silently?
Please note that if you use the new features flag you wouldn't need
an extra check for EXYNOS5420.
> return 0;
> + }
>
> if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
> dev_err(&pdev->dev, "failed to get Resource 1\n");
> @@ -632,12 +648,13 @@ static int exynos_tmu_probe(struct platform_device *pdev)
> data->clk = devm_clk_get(&pdev->dev, "tmu_apbif");
> if (IS_ERR(data->clk)) {
> dev_err(&pdev->dev, "Failed to get clock\n");
> - return PTR_ERR(data->clk);
> + ret = PTR_ERR(data->clk);
> + goto err_triminfo_base;
> }
>
> ret = clk_prepare(data->clk);
> if (ret)
> - return ret;
> + goto err_triminfo_base;
>
> if (pdata->type == SOC_ARCH_EXYNOS ||
> pdata->type == SOC_ARCH_EXYNOS4210 ||
> @@ -707,9 +724,13 @@ static int exynos_tmu_probe(struct platform_device *pdev)
> }
>
> return 0;
> +
> err_clk:
> clk_unprepare(data->clk);
> return ret;
> +err_triminfo_base:
> + if (data->triminfo_base)
> + iounmap(data->triminfo_base);
There is a return missing here and iounmap() is missing for err_clk.
I suspect that this code should look like:
err_clk:
clk_unprepare(data->clk);
err_triminfo_base:
if (data->triminfo_base)
iounmap(data->triminfo_base);
return ret;
> }
>
> static int exynos_tmu_remove(struct platform_device *pdev)
> @@ -720,6 +741,9 @@ static int exynos_tmu_remove(struct platform_device *pdev)
>
> exynos_unregister_thermal(data->reg_conf);
>
> + if (data->triminfo_base)
> + iounmap(data->triminfo_base);
> +
> clk_unprepare(data->clk);
It would be better to do clk_unprepare() first to keep consistency with
failure path in exynos_tmu_probe().
> if (!IS_ERR(data->regulator))
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists